Error msg : Message no. IO304 while delivery for serial no.

Hi,
In serial no. profile we have maitain
    MMSL     Maintain goods receipt and issue doc.     03     01
    PPAU     Serial numbers in PP order                           03     01
    PPRL     PP order release                           03     01
   PPSF     Serial nos in repetitive manufacturing     03     01
   QMSL     Maintain inspection lot                           03     01
   SDAU     Serial numbers in SD order     01     01
   SDCC     Completness check for delivery     02     01
   SDCR     Completion check IR delivery     02     01
   SDLS     Maintain delivery                          02     01
   SDRE     Maintain returns delivery                          02     01
as per abovw while creating delivery serial no. are optional even als but While doing PGI i am getting error message
Only 0 serial numbers entered instead of 1
Message no. IO304
Diagnosis
There is a serial number obligation, so the number of serial numbers must equal the number of serial numbers in the material document.
You can post the operation only if you entered the correct number of serial numbers previously.
can you help on this issue.
regards,
zafar

Done it with some "diff. way"
What way ??? Please develop the habit of updating the forum if you resolved any issue on your own.
thanks
G. Lakshmipathi

Similar Messages

Error while scanning for Serial-ATA devices.

There was an error while scanning for Serial-ATA devices. I'm not sure how to trouble shoot this. I believe a secondary drive in bay 2 died.

I also have just began to hit this issue.
I have 4 2T enterprise class WD drives in a raid 1+0 (or was it 0+1) config.
Device Model: WDC WD2002FYPS-01U1B1
One disk (disk0 in bay 2) keeps disappearing. Completely. /dev/disk0 and /dev/rdisk0 vanish.
If I look at "about this mac" / "More Info" / "Serial-ATA" I get the "error while scanning ...".
If I reboot, the offending disc comes back and the raid volumes start rebuilding.
The SMART status is (reported to be) fine.
I use the 'smartmon' tools and look at the extended SMART status and the values of the counters all looks the same as the other drives. I can run an extended offline test, which takes forever to execute. disk 1 and 3 eventually finish with success (it writes this status into a SMART log area on the disc).
Disk 2 and 0 take longer. I image this is because 2 is being read to resilver 0. Currently, I am running with disk0 absent again, and disk 2s test did not complete. It claims it was aborted by the host, so I imagine the one on disk0 will claim the same after I reboot.
My system is under extended AppleCare until 16 Jan 2011, so if I can determine that this is a disc controller error, I can get it fixed. The drives have a 5 year warrantee, and are less than 1yr old, so they are covered. I just need to figure out what the issue is.
I will now reboot and recover disk0 and see if perhaps there is anything recorded in the SMART log.
There is nothing in kernel.log specific to disk0. I include the log extract here for posterity. The "speed" volume is not raid 0+1, just striped, which is why it gets aborted.
Dec 21 23:30:26 8way kernel[0]: AppleRAID::restartSet - restarting set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D).
Dec 21 23:30:26 8way kernel[0]: AppleRAIDMirrorSet::rebuild complete for set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D).
Dec 22 04:17:22 8way kernel[0]: AppleRAID::restartSet - restarting set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76).
Dec 22 04:17:22 8way kernel[0]: AppleRAIDMirrorSet::rebuild complete for set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76).
Dec 22 05:23:16 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:23:30 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:23:44: --- last message repeated 1 time ---
Dec 22 05:23:44 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:24:14: --- last message repeated 4 times ---
Dec 22 05:24:19 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:24:56: --- last message repeated 2 times ---
Dec 22 05:24:56 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:25:17: --- last message repeated 1 time ---
Dec 22 05:25:17 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:25:31: --- last message repeated 1 time ---
Dec 22 05:25:31 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on EB932B0E-8476-480C-BBD4-53A9A77D9FEF
Dec 22 05:25:45: --- last message repeated 1 time ---
Dec 22 05:25:45 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:26:15: --- last message repeated 2 times ---
Dec 22 05:26:21 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:26:51: --- last message repeated 4 times ---
Dec 22 05:27:12 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:27:33: --- last message repeated 1 time ---
Dec 22 05:27:26 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:27:40: --- last message repeated 1 time ---
Dec 22 05:27:40 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:28:24: --- last message repeated 1 time ---
Dec 22 05:28:24 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:28:39: --- last message repeated 1 time ---
Dec 22 05:28:39 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:29:14 8way kernel[0]: AppleRAID::completeRAIDRequest - error 0xe00002ca detected for set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76), member 3C6E9EA4-831A-4
57A-8CA5-6E7E9CBEED25, set byte offset = 222462894080.
Dec 22 05:29:14 8way kernel[0]: AppleRAID::recover() member 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25 from set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76) has been marked
offline.
Dec 22 05:29:14 8way kernel[0]: AppleRAID::restartSet - restarting set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76).
Dec 22 05:32:38 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:33:22: --- last message repeated 1 time ---
Dec 22 05:33:22 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:34:06: --- last message repeated 1 time ---
Dec 22 05:34:06 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:34:53: --- last message repeated 1 time ---
Dec 22 05:34:53 8way kernel[0]: AppleRAID::completeRAIDRequest - error 0xe00002ca detected for set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D), member 9722C38E-DFF9-4
68F-8DE5-809432493168, set byte offset = 35194773504.
Dec 22 05:34:53 8way kernel[0]: AppleRAID::recover() member 9722C38E-DFF9-468F-8DE5-809432493168 from set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D) has been marked
offline.
Dec 22 05:34:53 8way kernel[0]: AppleRAID::restartSet - restarting set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D).
Dec 22 05:37:24 8way kernel[0]: AppleAHCIDiskQueueManager::setPowerState(0x13d64500, 2 -> 1) timed out after 100113 ms
Dec 22 05:37:44 8way kernel[0]: Failed to issue COM RESET successfully after 3 attempts. Failing...
Dec 22 05:37:44 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002be on EB932B0E-8476-480C-BBD4-53A9A77D9FEF
Dec 22 05:37:44 8way kernel[0]: AppleRAID::recover() member EB932B0E-8476-480C-BBD4-53A9A77D9FEF from set "speed" (190EC75B-C702-4481-ABCF-8C5A0D54BBE0) has been marked
offline.
Dec 22 05:37:44 8way kernel[0]: AppleRAID::restartSet - restarting set "speed" (190EC75B-C702-4481-ABCF-8C5A0D54BBE0).
Dec 22 05:37:44 8way kernel[0]: disk4: media is not present.
Dec 22 05:37:59 8way kernel[0]: speed::terminate(kIOServiceSynchronous) timeout
Dec 22 05:37:59 8way kernel[0]: AppleRAID::completeRAIDRequest - underrun detected, expected = 0xa000, actual = 0x9e00, set = "speed" (190EC75B-C702-4481-ABCF-8C5A0D54BB
E0)
Dec 22 05:37:59 8way kernel[0]: disk4: data underrun.
Dec 22 05:37:59 8way kernel[0]: jnl: disk4: dojnlio: strategy err 0x5
Dec 22 05:37:59 8way kernel[0]: jnl: disk4: end_transaction: only wrote 0 of 40960 bytes to the journal!
Dec 22 05:37:59 8way kernel[0]: disk4: media is not present.
Dec 22 05:38:00 8way kernel[0]: jnl: disk4: close: journal 0x13f34e04, is invalid. aborting outstanding transactions

I am trying to send an iMovie project to iDVD and I keep getting the following error msg. "Unable to prepare subject for publishing: The project could not be prepared for publishing because an error occurred. (-43)"

I am trying to send an iMovie project to iDVD and I keep getting the following error msg. "Unable to prepare subject for publishing: The project could not be prepared for publishing because an error occurred. (-43)"

Check out this thread: https://discussions.apple.com/thread/1421870
It may mean you either your Event or your Project. Have you moved any of the files in the Finder by any chance? That error may come up if you moved anything outside of iMovie. Do you get an error message when you choose Share>Export to iMovie (choose medium size) and save it to the Desktop? If you can export it to the desktop, you can pull that file into iDVD separately and still make it work.

Recently purchased a 2nd handed iphone 4 (that's all i afford) but when trying to create icloud account it give me "com.apple.appleaccount error 403" message. I am asking for support and advice.

recently purchased a 2nd handed iphone 4s(that's all i afford) but when trying to create icloud account it give me "com.apple.appleaccount error 403" message. I am asking for support and advice.

Did you already check this post?
Re: I am facing problem in signing in iCloud on my iPhone. when I enter my Apple ID, I got the message which is: "The Operation could't be completed. (com.apple.appleaccount error 403.)" Kindly solve my problem. I want to sign iCloud from my iPhone.worri

Database error"ORA-00060: deadlock detected while waiting for resource"

Hi All,
I got dump as
Database error text........: "ORA-00060: deadlock detected while waiting for
resource"
Internal call code.........: "[RSQL/RDUP/NRIV ]"
Please check the entries in the system log (Transaction SM21).
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
in
procedure "READ_NRIV" "(FORM)", nor was it propagated by a RAISING clause.
Can u ppl tell me how to get correct this?
Edited by: Bala Chandar on Jul 20, 2009 11:01 AM

Hi Bala,
Same type of dump we got when we trigger the DTP which in process chain to load data from DSO to Info cube. And the load had processed with 225 data package and at 164th data package we got this error and except 164th data package all data package processed successfully
And the request was red. So we had done processed manually by clicking the icon. So all its been green and successfully loaded.
So when you do process manual the particular data package which got failed will be process successfully

Geting error msg "Unable to start Web browser for U" while open Siebel Icon

hi,
I have Successfully Installed Siebel 8.1 on Windows 7 Operating System After this when i am trying to open "Siebel Financial Services - ENU" ICON i am getting Error Message that "Unable to start Web browser for your Session".
I have Internet Explorer 8 on my Windows 7 operating system.
Waiting for ur Quick Reply.
THANKING YOU!
Best Regards
Oradb.

Hi,
Which web browser you were trying to open the siebel application. You should make that web browser as a default browser for your OS.
Open IE- Tools - Internet Options - Programs - Make Default Browser.
Try this and let me know the results.
Regards,
Joseph

Error in post goods receipt of delivery for a cross company return STO

Hi
I created a cross company return STO in ME21N (with returnd indicator). Vendor V001 (DC) and Site F001.
I created a delivery in VL10B. Delivery Type NCR.
I did a Goods Receipt for STO. Movement Type 161. Internally stock in issued from site F001.
I am trying to do a Post Goods Receipt of the Delivery in VL02N and I am getting this error.
Delivery quantity is greater than supplying site stock quantity
Message no. VL900
Supplying site is F001 which has enough stock.
DC has no stock and I amtrying to return stock to DC from store.
How to eradicate this issue?
Thanks and Regards

Hi
http://wiki.sdn.sap.com/wiki/display/B1/SAPBusinessOne...ToGo-3.TheBasicsofFinancial+Accounting
http://help.sap.com/saphelp_sbo88/helpdata/en/45/06b9997d720487e10000000a155369/content.htm
kiran

Error msg when doing a Return Delivery

Hi All
Can you help here please
We are on EC SRM 4.0 and have just upgraded to SP11
When doing a return delivery on an existing confirmation,
sometimes we get a error message"Confirmation already exits"
Then we cannot do anything with this confirmation
Thanks
Prakash

Hi
<b>Please go through the SAP OSS Notes below -></b>
Note 718138 - Reading of backend purchase orders for EC POs in EBP 4.0
Note 872011 - Return not possible for item with final_entry set
Note 972572 - Error BBP_PD 860 for return delivery of a confirmation
Note 1069875 - Error when second partial cancellation is posted to backend
Note 1031297 - Movement type is always read from Customizing
Do let me know.
Regards
- Atul

IDVD error msg Not enough free disk space for encoding the remaining assets

I get this error message on iDVD, does this mean I need to free up hard disc space... "Not enough free disk space for encoding the remaining assets"

How full is your Mac's hard drive?
Locate your iMac's hard drive icon on the OS X desktop. Click the icon once, then use the keyboard key combination Command-I. This will give you additonal info about your iMac's internal hard drive.

Error msg: "Not enough free disk space for encoding the remaining assets."

I am trying to burn a DVD that includes a slideshow and short movie. Total project is 3.5GB. I am getting this error message: "Not enough free disk space for encoding the remaining assets." My hard drive has 600 GB left. Can anyone help?

If you can't free up enough space by deleting items, get an external hard drive and move the files there. An absolute minimum of 25 GB is required by iDVD.
arlenefromcary wrote:
Is it possible to do this from another source?
I'm not sure what you mean by that.
mish

Query Designer: Error-msg: Please enter a valid value for charact 1FORMULA

Hello BI friends,
when I open a query in the Query Designer (or change query from BEx Analyzer) I get this message. There is no detail description for the message. After pressing the OK-button in the message I get an u201Demptyu201D Query Designer (to create a new or open a query).
The query contains some formulas, I know. I have checked the query by starting it via RSRT and debugging. There is only a warning (exception contains a non-numeric value).
But how can I check the formulas, exceptions or something else if the Query Designer doesnu2019t show the query definition?
Thanks in advance!

Hello Karen,
thanks for your answer.
Unfortunately I didn't mention yet that we have BI 7.0, but I'm using a 3.x query and 3.x QD. The query has not been transfered to 7.0 level (I hope it, since other colleagues work in the system too). How can I check the level (3.x / 7.0) of the query?
I have checked the table RSZRANGE, but I didn't find any row for the char. 1FORMULA, I have checked the fields IOBJNM, FACIOBJNM and ATTRINM. I also didn't find a row for RSRREPDIR-COMPUID = RSZRANGE-ELTUID. Did I search in a wrong way?
I have also checked the program COMPONENT_RESTORE, but I didn't start it for the IProv, comp type = REP and the special query, because I'm not sure what I'm doing there exactly (the program has no documentation).
Is it still the same way as you have described under these conditions?
Best wishes
Britta

Gertting error msg 'no access authorization' while using FM FTP_CONNECT

HI All,
I'm using FTP_CONNECT FM to connect to FTP server and i'm getting the message User has no access authorization for computer. When i try to connect from command prompt using the same ip address, user name and password ..i can connect successfully. From SAP i getting the no authorization message.
Please let me know do we need to maintain the IP address of the FTP server in sap ?

Hello,
Check this programs how they are using the FM
RSFTP002                               Execute FTP Command
RSFTP003                               FTP put / get Test
RSFTP004                               FTP Copy
RSFTP006                               FTP command list
RSFTP007                               Test FB:FTP_SERVER_TO_R3 / FTP_R3_TO_SERVER
RSFTP009                               Test FTP put with Verify
RSIRCCON                               KPro: Test of data connections to memory repositories

Two Mail Error Msgs: Message Can't Be Saved/Drafts & Invalid Text Encoding

My Mail was working fine until just recently. Now when I am replying or composing emails, out of the blue, in the middle of typing my message, I will get this error message first: "This message can't be saved to the Drafts mailbox."
After closing that error box which had nothing to do with my typing, I will then get this second error message: "Invalid Text Encoding....converted to the "Japanese (Shift JIS)" text encoding...."
I then close that message and try to finish typing my message. I've checked to see that my text encoding is set where it belongs, and it is never set to Japanese. Does anybody know what is going on here? Any help will be much appreciated. Thank you, Diane

The following test might be helpful in deciding what to try next: Create a New User Account, and as that New User try to set up one account -- since you have a POP set to leave messages on the server after download. If not familiar with setting up a New User Account, see:
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8235.html
This will be a useful test to now check this behavior in another User Account, and of course is not meant to suggest a permanent switch to the New User Account, but rather a test of the Mail application outside of your normal User Account and its existing setup data.
Ernie

Query error msg

Hi Guru's.
when i'm trying to run a query on 0COOM_CO2 cube, the system is throwing a error msg.
error msg:
     No value could be determined for variable 0P_FVAEX.
     Message no. BRAIN632
     Diagnosis
     This error diagnosis is specific only to the variables 0P_FVAEX or
     0P_CTPCA !
     Termination message BRAIN 632 appears:
     Could not determine value for variable 0P_FVAEX (or 0P_CTPCA).
     System response
     1. Operation method of SAP-Exit-Variables 0P_FVAEX or 0P_CTPCA
     With queries from the CO application, both SAP-Exit-Variables look for
     an entry for 'controlling area'. With this controlling area from the
     selection screen, the SAP-Exit-Variables program reads the attributes
     for InfoObject 0CO_AREA (controlling area).
     With queries from the FI application, the SAP Exit Variable 0P_FVAEX
     looks for an entry for 'company code'. With this company code from the
     selection screen, the SAP Exit Variables program reads the attributes
     for InfoObject 0COMP_CODE (Company Code).
     0P_FVAEX determines the fiscal year variant (attribute 0FISCVARNT) from
     the attributes for 0CO_AREA (CO queries) or 0COMP_CODE (FI queries).
     0P_CTPCA determines the currency type of the profit center local
     currency (attribute 0CURTP_PCA) from the attributes for 0CO_AREA.
     2. Cause of Error
     The attributes for the controlling area (InfoObject 0CO_AREA) or company
     code (InfoObject 0COMP_CODE) were not loaded into the BW system, or the
     attributes for the controlling area are not active in the BW system.
     Check whether this is the cause of the error in your BW system. Display
     the contents of table /bi0/mco_area or /bi0/mcomp_code using transaction
     se16.
     Application CO:
     Check whether the attributes 'fiscal year variant' (field FISCVARNT) and
     'profit center local currency currency type' (field CURTP_PCA) are
     filled in the 'A' version (field OBJVERS) for the selected controlling
     area. If the fiscal year variant in the OBJVERS = 'A' is empty, then the
     error is with variable 0P_FVAEX. If the currency type of the profit
     center's local currency in OBJVERS = 'A' is empty, then the error is
     with variable 0P_CTPCA.
     Application FI:
     Check whether or not the attribute 'fiscal year variant' (field
     FISCVARNT) is filled in the 'A' version (field OBJVERS) for the selected
     controlling area. If the fiscal year variant is empty in OBJVERS= 'A',
     then the error is with variable 0P_FVAEX.
     Procedure
     Using InfoSource 0CO_AREA, load the attributes for the controlling area
     or company code into your BW system.
     Afterwards, activate the attribute changes in your BW system. To do
     this, use transaction rsa1, path 'Tools > Hierarchy/Attribute changes',
     functions button 'InfoObject list'. Choose InfoObject 0CO_AREA or
     0COMP_CODE from this list, and activate the attribute changes.
     Procedure for System Administration
where do i start to debug it.
Thanks in advance,
Mav

The variable 0P_FVAEX fills the fiscal year variant based on the following checks in the order:
1. If you have a variable for 0CO_AREA the system looks into the first entry and determines the attribute 0FISCVARNT of 0CO_AREA.
2. The same for 0COMP_CODE.
3. Check if there is a variable for IM Program hierarchy and look for 0FISCVARNT.
4. Check project data for fiscal year variant.
5. Check CO area of the asset.
6. Get Fiscal Year variant from Oracle company(!)
7. Get FY variant from Oracle company code.
8. Get FY variant from Oracle organization.
So you need to use one of these info Objects in your variables.
Best regards
   Dirk

Sqlldr- ORA-00060: deadlock detected while waiting for resource

Hi Team,
My database version is 11.1.0.7.0. I am loading the data using sqlldr. I am getting the error ORA-00060: deadlock detected while waiting for resource. once dead lock detected ,whether data will be rejected after commit point reached(Rows=100000). FYI information only sqllder is running on the database,it is getting completed withing 5-10min. please help me whether any other lock happening on this due to sqllder.
sqlldr userid=orcl/orcle control=".$controlfile." log=".$logfile.".log data=".$datafile." bad=".$badfile." discard=".$discardfile." Bindsize=19000000 Rows=100000 Readsize=20000000 Errors=1000000";
Thanks in advance

user9256814 wrote:
Hi Team,
My database version is 11.1.0.7.0. I am loading the data using sqlldr. I am getting the error ORA-00060: deadlock detected while waiting for resource. once dead lock detected ,whether data will be rejected after commit point reached(Rows=100000). FYI information only sqllder is running on the database,it is getting completed withing 5-10min. please help me whether any other lock happening on this due to sqllder.
sqlldr userid=orcl/orcle control=".$controlfile." log=".$logfile.".log data=".$datafile." bad=".$badfile." discard=".$discardfile." Bindsize=19000000 Rows=100000 Readsize=20000000 Errors=1000000";
Thanks in advanceadditional clues will exist within alert_SID.ora file & subsequent trace file.

Error msg : Message no. IO304 while delivery for serial no.

Similar Messages

Maybe you are looking for