Error msg. PS cc 2014. The pattern is bad or corrupted.

I installed PS cc 2014 and things seemed to work OK. Then I tried installing plug-ins. Now I get an error msg. when I pull up PS either by itself or thru LR5. It says The Pattern is bad or corrupted. When I click OK everthing seems to work OK. What should I do?

Mylenium, there IS no proper system information just a dll missing as stated (see picture)
chirs thanks wil try your suggestion

Similar Messages

Error msg when syncing ipad "The disk could not be read from or written to" when loading photos. Does anyone have any idea how to fix?

? I get an Error msg when syncing ipad "The disk could not be read from or written to" when loading photos. Does anyone have any idea how to fix?

You have posted in the Mac forum for problems & questions usting the iTunes store. You will probably find more help in the following forum.
http://discussions.apple.com/forum.jspa?forumID=800

Error msg = pls. install/uninstall the product using setup.exe in the root folder

unable to install photoshop elements v10 on a windows 7, ultimate 64bit computer, get:
error msg = pls. install/uninstall the product using setup.exe in the root folder

yes, I am installing as the administrator. I have tried to install from
two different folders;
1. c://adobe photoshop elements 10.msi
and
2. c://program files/adobe/adobe photoshop elements 10.msi
get the same error message from both locations.
the error message is not specific as to "root folder"
someone please help with this. I would like to be able to install this app.

Error msg shown while cancelling the GR - Material Document

Hi All,
While trying to cancell the GR for an Asset / Material the following error msg shown:
Balance for transaction type group 10 negative for the area 01
Message no. AA629
Asset affected: 000000107102-0000
Diagnosis
With the transaction entered, the balance for the transactions in group 10 in area 01 will be negative in this fiscal year. However, the balance of transaction type group 10, according to its definition, must be positive in each fiscal year.
System Response
The system rejects this posting.
Procedure
Check the transaction type, the amount and the fiscal year in your posting. If you want to post a credit memo to an acquisition from the previous year, then use a transaction type for a retirement. If necessary, you can change balance rules after talking with your SAP consultant.
Can any one help what is the reason and how to find out the error.
Regards
SS

Hello,
Please refer SAP notes
160699
48886
Please also search SAP market place with message number., if these notes not suitable for you.
Regards,
Ravi

Error Msg: Apple Syncnotifier.exe - The procedure entrypoint sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.

Anybody out there have a solution to the following error msg. I have already unistalled and reinstalled itunes with no luck.
Please advise.
Apple Syncnotifier.exe - The procedure entrypoint sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.

Copy file "SQLite3.dll" from this location using Windows Explorer:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
Paste this file to this location
C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
Restart your computer, the message should disappear..

InDesign CS2 won't open: error msg states "Please install the MetaData plug-in and restart"

I'm unable to open my InDesign CS2 program, and am wondering if anyone has any suggestions for me. When I try to open it, I get an error message stating: "Cannot load Adobe InDesign CS2 because it requires MetaData. Please install the MetaData plug-in and restart Adobe InDesign."
It worked just fine last week - I have no idea what happened this week... (other than my 3-yr-old 'playing' with my computer...) I am able to open other CS2 programs like Illustrator and Photoshop. Any ideas for me??

Try trashing your preferences: Hold down Shift + Control + Option + Command immediately after launch. You'll get a dialog asking if you want to delete your preferences. If no dialog comes up you didn't do it fast enough.

Error msg when I compact: The folder 'Inbox' could not be compacted because writing to folder failed. Verify you have enough disk space, and have write privileg

I recently had my computer serviced. I re-downloaded Thunderbird (getting a newer version), and retrieved my saved email. Now, Thunderbird keeps asking me to compact, but when I do, I get this error message:
The folder 'Inbox' could not be compacted because writing to folder failed. Verify that you have enough disk space, and that you have write privileges to the file system, then try again.
Obviously, since I'm getting mail all the time, I have write privileges, and disk space. The question is whether there's a setting I need to specify, or whether Thunderbird is writing to a special partition that may have gotten write-protected when my computer was in the hospital - or whether this is related to a known bug.
All help appreciated.

The only know bug I can see is probably your anti virus is trying to scan the file when the new inbox is created leaving Thunderbird to think the file was not created.
As an experimental / diagnostic process. Restart the machine in safe mode with networking using Microsoft instructions for [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7] then try the compact. If it works I was most likely right. If it does not, another idea must surface.

I got error msg while i called the Java Funtion in XI thro XSLT

Hi,
In XI, i need one method/function for getting the current date/time without any parameter, because its only shows the current date/time from getting the system. So,I have been created a simple method/function in java without any parameter for getting the current date/time from the system. Using the XSLT to call the mehtod/function and assigned in the particular field. After i mapped that XSLT file in the XI, i executed in XI and also i gave input for some other fields and finally i got the Transmission error message.
<b>Error Message:
javax.xml.transform.TransformerException: com.sap.engine.lib.xml.util.NestedException: Illegal number of arguments or types of arguments in a call of function 'dateEST:ConvertToEST'.</b>
Here ConvertToEST is the method/function name, method/function was return in String datatype, and also in XI that field have same String datatype. This field have only return the current date/time.There is no input for this.
I have been excuted this method/function in Java, its working fine. So, give me your suggestion for this.
p.s. Award points if your answer is useful for me.
Thanks & Regards
Prakash T

Hi Prakash,
Can you tell me how u resolved the issue? Even I am facing the same error while running XSLT mapping in XI.
Regards,
Karen Pereira

I can't email photo's from iPhoto, the error msg I get is "The email server didn't recognize your username/password combination".I tried different passwords but nothing works.

Everthing else seems to work fine and can send regualr emails but when I go into iPhoto and say "Share" click on email and try and send it errors.
I have tried several past and present passwords but it doesn't work.

in the iPhoto preferences ==> accounts delete your e-mail account and reenter it
OR
IMHO the better solution is to set Apple mail as the email client in the iPhoto preferences
LN

Error msg when running Forte the first time

The first time I ran Forte after installing it, I got an error message. Does anyone know what this means? I got this message on Win 98 and 2000. Here is the error message:
"Some of the set of previously installed modules did not satisfy their dependencies
and will be treated as disabled.
For Tools Debugger ("org.netbeans.modules.debugger.debug/1") failed:
This module depends on Java package sun.tools.debug which is not loaded
(or registered according to theVersioning Specification)."

The same error message appeared when I installed Forte on a Linux platform. I wondered if it might have something to do with the fact that I set JDK_HOME to the location of J2SE and not J2EE, which I thought perhaps might have org.netbeans stuff in it, maybe also the remote debugging stuff in sun.tools.debug. But I'm not sure if I should set JDK_HOME of J2EE and reinstall Forte to find out.

Error Msg - "You must add the Class files for this enterprise bean"

Hi,
I am creating creating new enterprise bean using j2sdkee1.2. I am able to create .ear file in desired folder, but can not create .jar. Please help. Getting above error message.
remote, home interface files and file having business logic (EJB) is compiled and kept at desired location.
j2ee server started, Deploytool is started.
Then I can successfully create new application (.ear file)
Then I go for creating new enterprise bean. I get same application name in Drop down list named "Enterprise Bean will go in".
Then I can add home, remote and ejb class file to create jar ("Add" under "Contents" ).
When I say ok after adding these 3 files, I am getting error - "You must add the Class files for this enterprise bean".
In the deploytool console, getting error - "java.io.FileNotFoundException: C:\2sdkee1.2\mahesh\ConverterEJB.class (The system cannot find the path specified) "
Can you please help me where to configure the path?
Can u please help?
Please send your answer to - [email protected]
Cheers!

the path really begins with '2', without a 'j', ie not c:\j2sdkee1.2\...?
"java.io.FileNotFoundException:
C:\2sdkee1.2\mahesh\ConverterEJB.class (The system
cannot find the path specified) "

Error Msg | "Could not copy the page to your computer"

Hello everyone,
I keep encountering the following error in this directory
when I try to edit one of its .html files via Contribute:
"Could not copy the page to your computer"
I tried creating a new directory on the server and placed the
old files inside, but I didn't have any luck with editing those
files.
I also attempted to create a new page in that very same
directory (using new files) using a template - which worked, but
after I published and tried to edit it again, I get the same error.
Please advise.

No ideas at all? This issue hurts our ability to continuing
pushing for Contribute to be installed on our diverse Web
domain.

Error msg Could not find the main class.Program will exit. in jar execution

Hello,
I have created a jar so that I can used it in the webapp.
but when I click on it it says "Could not find the main class.Program will exit."
I searched a lot in the net and found that it has to do with the manifest file.
I even updated the manifest file using the command "jar umf main.txt filefolderupload.jar" with the class name mention along with the package heirarchy.
(pakage heirarchy in /,\ and .)
I am using JDK 1.5 . and have Updated JRE 1.6.
Also tried with extending the class with JApplet, but in vain.
Kindly help me in the above mention issue.
tia,
Sarwa

This post hints at a number of misunderstandings on your part, and raises a couple of important questions.
Note that this 'simple question' has a complicated answer. Given the complexity of it, it might pay to add Dukes to it, ..a lot of Dukes.
The important questions are.
1) Does this file/directory uploader need to provide the end-user with a file dialog in which they can choose a local directory to upload, or will a multi-file chooser do?
2) Does this uploader need to upload to foreign sites, or does it upload back to its own server?
Looking at this table I prepared to describe the [uploader/local file access|http://pscode.org/test/uploader/fileuploader.html] possibilities, if the answers to the questions are 'multi-file chooser will do' and 'home site only', the best option is a sandboxed app. launched using webstart (JNLP) - option 5. If either of those questions go the other way, option 6 (digitally signed with extended permissions) is needed.

HT201210 error msg when trying to update my iphone 4 to latest software: this device isnt eligible for the requested rebuild.

Can anyone advise why I am getting this error msg? I have the latest version of itunes and my mac software is upto date.
Many Thanks xx

I am having the same issue. I just had the battery replaced at a third party store. The battery powers the ipod up but it needs to be restored. It is saying it isn't eligible for rebuild. I am running MAC OS 10.4.11 itunes v. 9.0 and I just want it to be restored. I need help. Oh and its an 8 gb ipod touch.

What is this error msg

Hi,,
When trying to find draft budget for a project (in the budget form), an error msg appears, especially for the Approved Revenue and Cost Budget:
"This budget type has been upgraded to a plan type. you can create new versions only for the corresponding plan type" , What does it mean??
Thank u
Tasneem

Hi
The error message refers to the fact that the budget type you are trying to edit has been upgraded to financial plan.
When forms based budget were upgraded to financial plans in the html web pages, they are no longer editable in teh form based form.
You need to open the html web page for editting those budgets.
Dina

Error msg. PS cc 2014. The pattern is bad or corrupted.

Similar Messages

Maybe you are looking for