Error Msg: "The update "iTunes" can't be installed"

Hi, I'm trying to do a software update for iTunes and I got this error message:  "The update “iTunes” can’t be installed".  It then said that it could not be verified. Any ideas why and how do I get around it? 

With that one, I'd try updating using a .dmg installer downloaded from the Apple Website:
http://www.apple.com/itunes/download/

Similar Messages

  • Error Msg: "The application iTunes can't be opened. -1712"  How can I open the application?

    Error Msg:  "The application iTunes can't be opened.  -1712"  Spinning Wheel from ****!  How can I open this application?

    Try downloading and reinstalling iTunes.
    Does iTunes start normally in Safe Mode by holding down the Option and Command keys when starting iTunes?
    If it works normally, take a look at this Apple doc -> iTunes: Troubleshooting issues with third-party iTunes plug-ins

  • "The folder "iTunes" can not be found or created, and is required. The defa

    Hi all,
    I am using a 80GB ipod classic for some time now. I recently bought a new hard drive and am in the process of repopulating my files. My problem is with this error message, "The folder "iTunes" can not be found or created, and is required. The default location for this folder is inside the "My Music folder."
    My old hard drive is intact but when I place the My Music/iTunes file on to the hew hard drive I get the same message over and over. I have Googled the heck out of this one to no avail. I have tried many approaches to this issue and am beyond aggravation. Am I simply to accept that 42GB of music is gone? Or that I have to revert to my old hard drive just for iTunes...
    Thank you...

    Hello, Welcome to Apple Discussions.
    You may wish to try
    iTunes for Windows XP: "Disk is locked" or "iTunes folder cannot be found" when installing or opening iTunes
    http://support.apple.com/kb/HT1866?viewlocale=en_US

  • In updating my iPod to 6.1.2, I received an error during the update.  Now, ipod is not rebooting.  Has screen showing usb to Itunes picture.   Turning off and back on it goes back to this picture.  I don't know how to reset so that I can restore my backup

    In updating my iPod to 6.1.2, I received an error during the update.  Now, my ipod is not rebooting.  It continues to display a screen showing usb to Itunes picture.   Turning off and back on, it goes back to this picture.  I don't know how to reset so that I can restore from my backup.
    A similar thing happened when I updated the ios on my ipad.  But, I was able to reboot, and then restore from backup.   How can I get my ipod to reboot and allow restore when it is not even recognized as I reconnect to my computer?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • After update, Itunes can't load. I get error message R6034, attempt to load the C runtime library incorrectly. I have repeatedly removed and reinstalled Itunes and still have the same problem!!!

    After update, Itunes can't load. I get error message R6034, attempt to load the C runtime library incorrectly.
    I also get error code 7 (Windows error 1114), saying itunes wasn't installed correctly. It appears that I am not the only one with this issue. what is wrong with the latest update?? I tried removing Itunes and all of its components and installing it again, but get same errors and i have also tried doing a system restore with the same results

    Doublechecking. Have you also tried the following user tip?
    Troubleshooting issues with iTunes for Windows updates

  • Hi.  I iMac, Mac OS X 10.6.8  Lately it does not update the program.  Writes the following: "Unable to install the update iTunes. An unexpected error occurred." What you need to do that right, that programs can be updated again?

    I iMac, Mac OS X 10.6.8  Lately it does not update the program.  Writes the following: "Unable to install the update iTunes. An unexpected error occurred." What you need to do that right, that programs can be updated again?

    you will have the most up to date itunes available for your os 10.6.8. to get a newer version you will have to upgrade to a newer os.

  • Error message when updating Itunes...can not open Itunes program

    I am recieving error message when updating Itunes for my computer.  The error message reads "MSVCR80.dll is missing and the other error message reads Error 7  (Windows error 126)"  I can not open my Itunes.  I have reloaded the Itunes onto my computer but still have the same error messages.  Please help.

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99364)

  • I have been using itunes on my windows based pc for years but since installing the latest itunes update I have been getting the error message A required itunes component is not installed. Please reinstall itunes. (-42404)

    I have been using itunes on my windows 64 bit laptop for years but since downloading the latest itunes 10.7 update whenever I opened itunes the error message 'A required itunes component is not installed. Please reinstall itunes (-42404)'
    Itunes would still load and play music in my library and I could still sync my ipod but when loading a CD itunes would not recognise the album/tracks and I would need to type them manualing after uploading.
    I have just bought the new iphone5 and went to sync the phone with itunes. itunes recognises the iphone when plugged in via the usb port or when wi fi is turned on but itunes will not allow the phone to sync.
    I spent over an hour the other morning speaking to apple customer support and have ensured I have administer right and that UAC is turned off.
    I was taken through msconfigure and adjusted the startup tab but still no joy.
    In the end I was e-mailed instructions on how to uninstall and then reinstall itunes and component parts.
    Now that I've uninstalled itunes when I try reinstalling I get the following messages during the download.
    The 1st message is;
    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application  Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    When I click ok the next message that appears sometime later during the install is;
    Service 'Apple Mobile Device' (Apple Mobile Device) Failed to start Verify that you have sufficient privileges to start system services.
    The options I have are to abort, retry or ignore. If I retry the same message comes back and if I  abort or ignore the download continues and I then get the following message:
    'Apple Application Support was not found. Apple Application Support is required to run itunes Helper. Please uninstall itunes, then reinstall itunes again. Error 2'
    After attempting to reinstall itunes only some components were installed however itunes would not open.
    It would appear many people have experienced problems with this latest download!

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • TS1424 I can't open iTunes. Get error message "the file iTunes library.itl cannot be opened because it was created by a newer version of iTunes"

    I cannot open itunes.  Getting error message: "the file iTunes library.itl cannot be read because it was created by a newer version of iTunes"
    What do I need to do so I dont lose all my loaded music, etc.?
    Thanks

    If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
    Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
    Not sure if the following site/link will tell the method...
    •Apple - Support - iTunes - install & update:
    http://www.apple.com/support/itunes/install/
    •Troubleshooting iTunes installation on Mac OS X:
    http://support.apple.com/kb/HT2311
    Good luck & happy computing!
    ps: i see you resolved this issue. it's magic!

  • Can't install itunes - error message  "the folder "itunes" cannot be found

    Help. I just bought a new Iphone and can't get itunes to load. I had itunes on my computer for several years for my nano - haven't synced up in about a year. Went to open it and got the following error message
    The folder "itunes" cannot be found or created and is required. The default location for this folder is inside Mu Music folder"
    I have uninstalled everything - quicktime, apple mobile, every single file. I have rebooted, run searches to make sure there were no files at all left - did it through control panel, search etc., rebooted and downloaded it again (this make about 5 times now) and still get that same message that the folder cannot be found. Help! I just blew about $400 in the Apple store!
    Can anyone help me?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Why am I now receiving the error 42404: a required iTunes component is not installed after the 10.5.3 iTunes update? Now, I cannot sync my iphone...

    Why am I now receiving the error 42404: a required iTunes component is not installed after the 10.5.3 iTunes update? Now, I cannot sync my iphone...I have uninstalled and re-installed several times now without any luck.
    Thanks,

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • You can not install the update "iTunes" [10.6.3]

    Hi everyone, on  my MacBookPro  a few days ago the itunes suggest me an update to 10.6.3. After the verify procedure/download,as every time ,comes the windows within the installation info, but when i start the installation (from the button) comes a popup titled "You can not install the update "iTunes" ---- Unable to verify the update: This could be corrupted during download. The update will be downloaded and checked the next time you run Software Update. ----
    ...BUT NOTHING EVERY TIME SHOW ME THE SAME ERROR
    Anyone kwon the solution ??
    Thanks in advance..

    I'd try updating using a .dmg installer downloaded from the Apple Website:
    http://www.apple.com/itunes/download/

  • Error occurred while installing the updates (iTunes)

    Error occurred while installing the updates (iTunes)
    Applies To: Windows | Windows XP | Programs
    I am running Windows XP and trying to update to iTunes version 10.5 (from version 10.3.1.55) and I keep getting the following error message, ‘Error occurred while installing the updates. If the problem persists, choose Tools > Download Only and try installing manually’ which I do only to have the same error message pop up.

    Look into what security software you are running and disable it and also go to apple.com/support and search for
    itunes store connection issues by actually typing that into the bar next to support then scroll down to one of the TS articles and begin a jounrey of internet explorer configuration.
    I have done the looking for you all:
    http://support.apple.com/kb/TS1379
    http://support.apple.com/kb/HT1527
    http://support.apple.com/kb/TS1368
    Here also is a video to help you first completely uninstall itunes you do not lose any of your music by removing itunes your music and apps and data are stored in your documents folder just uninstall iTunes.
    http://youtu.be/3c90vXO8K5w

  • Since I'd installed the new version of iTunes, iCal and Address book do not sync with my iPhone 3GS through iTunes anymore and I get an error message stating that iTunes can not sync with this iPhone. Was must i do to correct this issue?

    Since I'd installed the new version of iTunes, iCal and Address book do not sync with my iPhone 3GS through iTunes anymore and I get an error message stating that iTunes can not sync with this iPhone. Was must i do to correct this issue and if i must, how dI reintall iTunes without loosing my content?
    P.S. I am able to sync postcasts and music though!

    http://support.apple.com/kb/TS3694
    http://support.apple.com/kb/TS3125
    http://support.microsoft.com/kb/299357

  • How do I re-download podcasts? My external hard drive failed and I can't figure out how to download them again in the updated iTunes.

    How do I re-download podcasts? My external hard drive failed and I can't figure out how to download them again in the updated iTunes.

    The Time Capsule drive is a network drive. You have to mount it on the desktop before you will be able to drag/drop files onto the disk. More tips are in this thread:
    https://discussions.apple.com/message/17312017#17312017
    .....and then delete them from the Mac to free up space?
    The Time Capsule was designed for your backups.
    If you move a file to the Time Capsule drive and delete the file from your Mac.....you have no backup. 
    Your only copy of the file will be on the Time Capsule drive. I would only do this with files that I could afford to lose.
    All drives fail. When.....not if....the Time Capsule drive has a problem, you will lose your data.

Maybe you are looking for

  • How can I display data gathered in a subVI in a graph of the main VI?

    I have written a largish application (~50 VI's) which acquires, analyzes, display and saves data from an instrument with a built-in DAQPad. My problem is that my block diagram is rather messy by now. I'm using an event structure in my main VI which r

  • Follow Up on Resolution

    So kind of a follow up on this. If a project is going to be viewed primarly on a computer screen via either a DVD or possibly as an MP4 file or maybe even a WMV file, should the codec be the same for the best viewing result. In other words when I'm e

  • Can't find drivers for Satellite M30-842

    Hello, I am a repair technician, and I am repairing a European model Satellite with corrupted Windows; I have reformatted and I am installing Windows with my generic Windows XP Home CD. I have had no luck finding the drivers for (as listed in Device

  • Problem with RFC INTEGRATION_DIRECTORY_HMI

    Hello ! I h’ave one problem with the RFC connection INTEGRATION_DIRECTORY_HMI. When I test it, SAP ask me in a pop-up window an user/password. I’m sure that SAP should’nt ask me another user/password like I fill it (XIISUSER) in the definition of the

  • Checkbox: making it checked depending on column & disabling it at same time

    Hi, In my report region, I have a column with checkbox. The requirement is : depending on the value of a column, it should be checked or unchecked. And whenever it is checked, it should get disabled. Means the user can see that in a particular row th