Error msg This operation requires that Microsoft Professional 2013 is installed when using Sharepoint 2013

Hi,
I've recently installed Microsoft Project Professional 2013 and was successful at updating a SharePoint task list from within Project. However if I click on the Task list in SharePoint 2013 I get the error message; "This operation requires that Microsoft
Project Professional 2013 is installed." Of course I have Project Pro installed and I've even tried repairing the installation but the problem remains. Has anyone seen this problem before? Any ideas on how to fix it?
Thanks in Advance,
Mark E.
SharePoint 2013 Online (Office 365)
Microsoft Project Professional 2013
Windows 7 Home
Learning SharePoint

Same here with SharePoint Online under an E3 license.
I tried reinstalling MS Projects Pro, I get the same message... it does work if I use Google Chrome so the problem is likely with IE (I am using the latest version with updates applied)... seems to be related to some IE handler behind the scenes... any idea
how to correct this?
Note that this worked fine for a year until a couple of days ago (there must have been an update that messed up things)...
MS, please help...
Thank you,
Paul A.

Similar Messages

This operation requires that Microsoft Professional 2013-SP 2013

I receive this error message when I click connect to Project in a task list. I received this error message upon the SharePoint updates: March 2015 CU and April sec updates. Any correlations to the sec updates and my issue?
Update: I repaired MS Project Professional 2013 and issue still persists. This issue occurs in IE and Chrome.

My bad, i mean SharePoint Site...
Just go to the page where you want to click on "Open with Project" and do this:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
It will add your SharePoint Site to the compatibility view list.

This operation requires that microsoft project professional be installed

This operation requires that microsoft project professional be installed when launching "Open with MS Project" from a SharePoint 2013 task list. MS Project Professional is already installed on the machine.
Environment : Windows 7 SP1 , IE 11 , SP Enterprise 2013 ( Latest Patches )

I would check your file associations, make sure Windows knows to use Project to open the file type you are launching from Sharepoint.
Click start, Default Programs, File Assocoiations, you can then find the file extension of the type you are launching and ensure Project is listed s the program to open it, if the file type is not there, then add it by right clicking the file and selecting
"Open With."
If "Open With" isn't offered, just click on "Open". If there is no default program already associated with the file
type, you'll be given a choice of searching for a suitable program on the Web, or selecting a program from a list of installed programs, just as with the old "Open With".
Cheers,
Curt Winter
Certified Microsoft Professional
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied. If you found my post helpful, please mark it as the answer.

The installation Wizard requires that Microsoft Document Explorer is installed before you install Project SDK 2013

Hi,
I am trying to install Microsoft Project 2013 SDK on my computer and it wont install.
The wizard comes to a point where it tells me to install Microsoft Document Explorer. I press the install button but nothing happens, it is not installed.
I tried this many times but Microsoft Document Explorer is not installed.
I also tried to installing from other links on the forum but still does not work. Is this a bug with the installer ?
I am using : Windows 7 ultimate; MS Project 2013 Pro, VSTO 2013 PRO and Excel 2013.
Any comments or suggestions really appreciated.
Jake

Tjek you do not already have it installed. I had a similar problem where an old version was installed.
This might be a question for a another forum (http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vssetup) as i do not think many people here have a good
knowlegde of this component.

App store app giving error msg "ConnectionManager::invoke::Failed to find service connection url." when using correct passord

Hi,
I'm using the correct apple id/pwd. I get this error msg:
ConnectionManager::invoke::Failed to find service connection url.
Too many tries forced me to change my pwd. Using new pwd, still getting that error msg:
ConnectionManager::invoke::Failed to find service connection url.
Am trying to re-download purchases I lost due to needing to do a clean reinstall to correct some mystery issue. I was able to re-download some such old purchases the other day--but not now.
Any help much appreciated!

There is currently a system wide AppStore issue affecting certain users: http://www.apple.com/support/systemstatus
Nothing to do with your system in particular, it's a problem on the Apple servers.

I receive this error message: This script requires that jquery.js be loaded first. I cannot log into my bank account. I've also been having trouble with facebook & My Way

I listed one site below, but I am having problems with my Facebook (I cannot reply or like) and My Way page is blank except for the background and some empty boxes. Diagnostics say that Firefox is working correctly.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

I have an airport extreme and my computer runs Microsoft windows XP Media Center Edition 2005. I receive an error message saying " airport requires that your computer is running windows xp sp3 or windows vista sp1 or newer"...why?

i have an airport extreme and my computer runs Microsoft windows XP Media Center Edition 2005. I receive an error message saying " airport requires that your computer is running windows xp sp3 or windows vista sp1 or newer"...why?

It is required to be able to connect. Download SP3 here. http://www.microsoft.com/download/en/details.aspx?id=24
I Hope I Was Able To Help You Or Solve Your Question.
Simmm
3/12/2012
If Someone Helped You, Click
"This Helped Me"
If Someone Solved Your Question, Click
"This Solved My Question"

HT1926 trying to download itunes 10.6 on w7 64-bit, getting error msg: this installer has insufficient privileges to access this directory: C:\program data\microsoft\windows\start menu\programs ITunes. Log on as administrator. (I already am!)

Can't install latest itunes. error msg: "This installer has insufficient priviliges to access this directory: C:\ProgramData\Microsoft\Windows\StartMenu\Programs\ITunes. Log on as administrator or contact your system administrator." I am logged on as administrator and have been since i've owned this laptop. Any suggestions?

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

This component requires that the embedded font be declared with embedAsCFF=true.

Hey all,
I fall into a small problem with fonts embedding. In my application I have embedded over 50 fonts and all expect one works as expected.
That one shows an error "warning: incompatible embedded font 'Algerian-CFF' specified for spark.components::RichEditableText (RichEditableText310) . This component requires that the embedded font be declared with embedAsCFF=true."
I have been looking all over the internet for similar problem, without success. Why this font is not working while all the rest does? Any clues?
/* CSS file */
@namespace s "library://ns.adobe.com/flex/spark";
/* embedded font */
@font-face {
src: url("ttf/ALGER.ttf");
fontFamily: Algerian-CFF;
Thanks.

Thanks,
My issue is not to embed a font twice. Let me describe the issue so this will helpful.
I have embed a fonts like below code.And apply LucidaBlackletterSpark font for spark component but it gives me error like
"warning: incompatible embedded font 'LucidaBlackletterSpark' specified for spark.components::RichEditableText (RichEditableText2301) . This component requires that the embedded font be declared with embedAsCFF=true".
But Font have already embedAsCFF property true. I am not able to find the solution why it is give me this warning.Due to that i am not able to embed a font.
@font-face {
          src: url("assets/fonts/LucidaBlackletter.ttf");
          fontFamily: LucidaBlackletterSpark;
          embedAsCFF: true;
@font-face {
          src: url("assets/fonts/LucidaBlackletter.ttf");
          fontFamily: LucidaBlackletterMX;
          embedAsCFF: false;

I am the administrator but still get "This operation requires elevation."

New Dreamweaver user. I have confirmed that I am signed in as the administrator (the only account on my computer) but when I try using just about anything on the Dreamweaver "dashboard" I'm told that "This operation requires elevation."
64 bit, Windows 7.
Help...Cris

Hi
Windows often creates a separate 'standard' user account even if you have only ever created the admin account.
Try right clicking on your dreamweaver link and selecting, 'run as administrator'. If this fixes the problem then go into your properties for dreamweaver and select, 'always run as administrator'
PZ

A login webpage gives the message "This script requires that jquery.js be loaded first." then will not show the user ID and password login boxes. How can this be corrected?

A login webpage gives the message "This script requires that jquery.js be loaded first." then will not show the user ID and password login boxes. How can this be corrected?

That message is listed in two scripts on the bank's site. One function that can display the message is named PhotoRotator and the other is named PromoRotator. However, I can't seem to trigger the error myself.
If you have any add-ons that alter the page, such as ad blockers, try creating an exception for these sites and see whether that helps:
www.northrim.com<br>
www.northrimbankonline.com
You also could try this logon page: https://www.northrimbankonline.com/onlineserv/HB/Signon.cgi
(''Obviously you should be cautious about links offered on public forums to ensure you are not being phished! Check them out carefully before entering your username and password.'')

When I try to open Itunes I get this error msg, 'This copy of iTunes is corrupted or is not installed correctly. Please re install iTunes (-42404), I have tried repairing

When I try to open Itunes I get this error msg, 'This copy of iTunes is corrupted or is not installed correctly. Please re install iTunes (-42404), I have tried repairing, no joy, uninstalling and re installing, no joy. Any ideas?
<Subject Edited by Host>

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Not able to install Adobe Flash Builder in windows xp 32 bit OS. Getting error msg 64 bit required.

Hi All,
Not able to install Adobe Flash Builder 4.7 in windows xp 32 bit OS. Getting error msg 64 bit required.
Pls help me for installation.
thanks in advance.

You don't have service pack 3 most likely. Refer to the tech specs:
http://www.adobe.com/products/flash-builder/tech-specs.html
Mylenium

This component requires that the embedded font be declared with embedAsCFF=false.

I'm getting the following warning for my project.
"warning: incompatible embedded font 'MyFont' specified for views::MyViewInnerClass0 (MyViewInnerClass0_61) . This component requires that the embedded font be declared with embedAsCFF=false."
Here's what I have in my style.css file.
/* CSS file */
@namespace s "library://ns.adobe.com/flex/spark";
@namespace supportClasses "spark.globalization.supportClasses.*";
@namespace views "views.*";
@font-face {
          src: url("assets/MyFont.ttf");
fontFamily: "MyFont";
advancedAntiAliasing: true;
embedAsCFF: true;
@font-face {
          src: url("assets/MyFont.ttf");
fontFamily: "MyFont";
advancedAntiAliasing: false;
embedAsCFF: false;
The 2nd font section I have is what is suggested as the fix in most places but that isn't working out for me. I wonder if I'm missing something else.

I tried changing the name and it didn't work. Tried all sort of combinations too and none worked. Tried a different font and that didn't work too.
Turns out the problem wasn't in the declaration of the fonts but where I was using it.
I initially had the font declared globally
global
   fontFamily: DroidSansMono;
I saw that, in your comment you had mentioned "..then apply it to the component" so I applied the font to the label component
s|Label
fontFamily: DroidSansMono;
and boom.. no warning. Problem solved.
Thanks so much.

I am from iran. i can not download from app store. iTune gives me such an error like this : you must download version 11.1 iTune and when i want to do that i can not.

i am from iran. i can not download from app store. iTune gives me such an error like this : you must download version 11.1 iTune and when i want to do that i can not.

Try Here > https://discussions.apple.com/thread/4074945?tstart=0

Error msg This operation requires that Microsoft Professional 2013 is installed when using Sharepoint 2013

Similar Messages

Maybe you are looking for