Error msg upon exit homesite

Hi,
Appreciate it if anyone can help to give any clues why this 3
msg pop up everytime I exit homesite. The os used on the pc is
Windows XP. Thanks a lot!
1) Homesite has encountered a problem and needs to close. We
are sorry for the inconvenience.
2) Error Signature: AppName: Homesite5.exe AppVer:6.0.0.7658
ModName: kernel32.dll ModVer:5.1.2600.2180 Offset: 0001eb33
3) Application error: Exception EInvalidPointer in module
Homesite5.exe at 000032AA. Invalid pointer operation.

Hi,
My operating system is: Windows 7
Adobe version: 10.1.3
Thx for you help.
Take care,
john

Similar Messages

On Windows XP SP3, Firefox 17.0.1 crashes upon exit with this error: "The instruction at "0x7c84495d" referenced memory at "0xf94d9326". The mem could not be r

Here is the error in total: "The instruction at "0x7c84495d" referenced memory at "0xf94d9326". The memory could not be "read. I have tested this on several of our workstations, all with the same error.
I have started FF in Safe Mode and the error comes up. I've uninstalled it, renamed the install directory and still the error persists. I've updated the plugins to no avail. In Windows 7, this issue does not occur. Since it crashed upon exit, the Crash Recorder doesn't come up.

I've already started Firefox in Safemode and the same issue persists. I've also gone in and manually disabled all add-ons and againk the same issue.

Error msg in user exit

Hi all,
how to set the particular field in customer tab to be open/available for input after error msg is being triggered

> Hi all,
> how to set the particular field in customer tab to be
> open/available for input after error msg is being
> triggered
Hi,
To avoid this problem, put all the related fields in the tab inside a chain..endchain statement At pAI event of your screen program.
e.g.
PROCESS AFTER INPUT.
LOOP AT ITAB.
    CHAIN.
      FIELD MAKT-MATNR.
      FIELD MAKT-MAKTX.
      FIELD MAKT-MAKTG.
      MODULE MODIFY ON CHAIN-REQUEST.
    ENDCHAIN.
ENDLOOP.
Regards

Had this error msg in my application log:

Had this error msg in my application log:
[21/Feb/2002 10:16:20:7] info: REQ-012: thread add
[21/Feb/2002 10:16:20:7] info: REQ-012: thread add
[21/Feb/2002 10:16:20:7] info: ENGINE-ready: ready: 10820
BASEURL: https://ssunp03.company.com:8081
strURL: https://ssunp03.company.com:8081/cgi-bin/gx.cgi/AppLogic+EventServerManager
EventServerHttpInvocation > java.net.MalformedURLException: unknown protocol: https
**Out of memory, exiting**
ld.so.1: /pimcreg5/imc/nas/40sp3/nas/usr/java/bin/sparc/native_threads/jre: fatal: /pimcreg5/imc/nas/40sp3/nas/us
r/java/lib/sparc/native_threads/libjava.so: mprotect failed: Resource temporarily unavailable
Killed
Connected to LDAP server on ssunp03.company.com port 1390
[21/Feb/2002 02:42:49:1] info: ENGINE-class_loader_created: New class loader com.kivasoft.engine.EngineClassLoade
rNonVersionable@1c14d67f has just been created
Can anyone share with me his experience about ld.so.1?? What is it and why does it cause my apps server to reboot?

It looks like you might simply have run out of memory. It just looks like the JRE tried to adjust its memory map and run out space. When mprotect fails the problem probably isn't with the .so itself.
What are the memory characteristics of your machine? Including the heap and stack space that you allocate for your JVM, as well as the actual physical and swap space available on the server.

Error Msg During PO creation

Hi,
How to bring the error msg if the purchase order value exceed than the valuation price of Purchase requistion
Thanks in Advance
Regards,
Renuga.A

hii
We can do that by using USER EXIT option.
So check with ur ABAPer and give ur functional requirements with which kind of error should come there .
Technical consultant can do that .
Thanks
SAP-MM

When I reboot my PC I get error msg: "procedure entry point SQlite3_wal-checkpoint could not be found..."

I had to uninstall prior version of iTunes to install IOS5 in my iPhone 4 (relatively new phone, only about 5 weeks old). It took several attempts to install IOS 5, and I finally succeeded only after disableing Kaspersky AV and the Windows Firewall. This, even though the iTunes connection diagnostics reported everything was OK, no errors and all green indicators. I had opened iTunes as Administrator too. So, now I have IOS 5 installed and running ok on the iPhone4, but I have a new problem on my PC that arose from all the different attempts to get this done. Here's more detail on the procedures and system changes I had made on my PC, and then what I get for the error msg.
1) As Instructed by an Apple rep, I UNINTSTALLED both iTunes and Quicktime. I then rebooted and ran iTunes in Admin mode, used the Connection diagnosis (reported all OK) and then tried to install IOS 5 on my iPhone4. The download (which would take between 30-45 minutes on each attempt) would fully complete and then I'd get an error msg of "server timeout". This led to further advice from Apple telling me to try the download again, this time with AV and Firewall disabled. So I rebooted again, disabled AV and Firewall and the IOS5 succeeded.
2) However, ever since I had removed both iTunes and Quicktime and reinstalled (only) iTunes (so far), each time I reboot my pc I get the following:
A Window opens with title: "Apple Sync Notifier exec Entry Point Not Found". Within the box below the title the following error msg appears: "The procedure entry point SQlite3_wal_checkpoint could not be located in the dynamic link library: SQlite3.dll"
I performed a search for SQlite3 in My Computer. It indeed shows up in a number of places, including within an Apple folder.
I'm using 64bit Win7 Home Premium SP1 on a PC with AMD Phenom II X4 945 Processor, 3 GHz with 8.00 GB RAM.
All iPhone and other applications seem to be behaving normally. I just have to hit "OK" to get rid of that annoying (new) error message that is apparently coming about during the PC startup process. It does NOT recur if I put the system in sleep mode, enter and exit iTunes, etc. It only occurs on reboot.

I have searched my computer for that file SQlite3.dll and also file QTCF.dll and I cannot find either one when I search my whole computer for it. I cannot fix this! I deleted Itunes and every time I try to download it, it goes through all this download till the end when it says that iTunes.exe-entry point now found and that Procedure entry point message comes up. HELP! This is driving me crazy. How can I get itunes to work again when I can't find the danged .dll file to remove, move or rename!?!?!??

When i try to open docs in mail box i get an error msg : there is a problem with adobe acrobat/read

when i try to open docs in mail box i get an error msg : "there is a problem with adobe acrobat/reader. If it is running please exit and try again (1014:1014)"

I have the same problem also but solved with the solution from http://www.brain-cluster.com/blog/orange/2011/03/06/there-problem-adobe-acrobatreader-if-it-running-please-exit-and-try-again

CS4 Error on Normal Exit

Whenever I perform a normal Exit of PS CS4, I receive the error message; 'Adobe has detected that the application Adobe Photoshop CS4 has unexpectedly quit.' Is there any known cause / fix for this? (running OSX 10.6).
Thanks

I had the same problem, PS CS4 on Mac crashes upon exit. Cause seems to be related to preferences and started happening shortly after 10.6 upgrade.
You will need to restore the preferences.
If you have a timemachine backup and can remember when it was stable, - then restore: <~User Home Directory> Library > Preferences >Adobe Photoshop CS4 Settings and restore all of the files. I had a laptop with a good set of preferences so I just copied them over.
If that is not available you will need to reset the preferences back to defaults by simply renaming the 'Adobe Photoshop CS4 Settings' directory and starting PS. It will then re-create them.
If for some reason you still have the problem, then there is an article on the adobe support site you should find. They suggest looking at 'add-ins' next.
Good Luck

Reg: Error msg display

Hi
I got a requirement that i have to display one error msg when some condition is fails for that i found one exit and i write the code. now i have to do ut the cursor position where that error is coming
Please help me out
Thanks in Advance.
Regards
Rao

Hi
use ,
SET CURSOR FIELD itab-variable .
regards,
Ramya

Query error msg

Hi Guru's.
when i'm trying to run a query on 0COOM_CO2 cube, the system is throwing a error msg.
error msg:
     No value could be determined for variable 0P_FVAEX.
     Message no. BRAIN632
     Diagnosis
     This error diagnosis is specific only to the variables 0P_FVAEX or
     0P_CTPCA !
     Termination message BRAIN 632 appears:
     Could not determine value for variable 0P_FVAEX (or 0P_CTPCA).
     System response
     1. Operation method of SAP-Exit-Variables 0P_FVAEX or 0P_CTPCA
     With queries from the CO application, both SAP-Exit-Variables look for
     an entry for 'controlling area'. With this controlling area from the
     selection screen, the SAP-Exit-Variables program reads the attributes
     for InfoObject 0CO_AREA (controlling area).
     With queries from the FI application, the SAP Exit Variable 0P_FVAEX
     looks for an entry for 'company code'. With this company code from the
     selection screen, the SAP Exit Variables program reads the attributes
     for InfoObject 0COMP_CODE (Company Code).
     0P_FVAEX determines the fiscal year variant (attribute 0FISCVARNT) from
     the attributes for 0CO_AREA (CO queries) or 0COMP_CODE (FI queries).
     0P_CTPCA determines the currency type of the profit center local
     currency (attribute 0CURTP_PCA) from the attributes for 0CO_AREA.
     2. Cause of Error
     The attributes for the controlling area (InfoObject 0CO_AREA) or company
     code (InfoObject 0COMP_CODE) were not loaded into the BW system, or the
     attributes for the controlling area are not active in the BW system.
     Check whether this is the cause of the error in your BW system. Display
     the contents of table /bi0/mco_area or /bi0/mcomp_code using transaction
     se16.
     Application CO:
     Check whether the attributes 'fiscal year variant' (field FISCVARNT) and
     'profit center local currency currency type' (field CURTP_PCA) are
     filled in the 'A' version (field OBJVERS) for the selected controlling
     area. If the fiscal year variant in the OBJVERS = 'A' is empty, then the
     error is with variable 0P_FVAEX. If the currency type of the profit
     center's local currency in OBJVERS = 'A' is empty, then the error is
     with variable 0P_CTPCA.
     Application FI:
     Check whether or not the attribute 'fiscal year variant' (field
     FISCVARNT) is filled in the 'A' version (field OBJVERS) for the selected
     controlling area. If the fiscal year variant is empty in OBJVERS= 'A',
     then the error is with variable 0P_FVAEX.
     Procedure
     Using InfoSource 0CO_AREA, load the attributes for the controlling area
     or company code into your BW system.
     Afterwards, activate the attribute changes in your BW system. To do
     this, use transaction rsa1, path 'Tools > Hierarchy/Attribute changes',
     functions button 'InfoObject list'. Choose InfoObject 0CO_AREA or
     0COMP_CODE from this list, and activate the attribute changes.
     Procedure for System Administration
where do i start to debug it.
Thanks in advance,
Mav

The variable 0P_FVAEX fills the fiscal year variant based on the following checks in the order:
1. If you have a variable for 0CO_AREA the system looks into the first entry and determines the attribute 0FISCVARNT of 0CO_AREA.
2. The same for 0COMP_CODE.
3. Check if there is a variable for IM Program hierarchy and look for 0FISCVARNT.
4. Check project data for fiscal year variant.
5. Check CO area of the asset.
6. Get Fiscal Year variant from Oracle company(!)
7. Get FY variant from Oracle company code.
8. Get FY variant from Oracle organization.
So you need to use one of these info Objects in your variables.
Best regards
   Dirk

Error message in EXIT for PR

HI:
I want to write some error messages in PR exit, But while checking the PR ,only one error message would be displayed when many items for this PR could not met the needs of the condition writen in PR exit. Does there a way we can use to display error message per item.
Hope someone can help me.TKS.

I'm not sure what exactly do you need, if you set the E message in looping ,then when the system loop and find 1 item and meet the error msg logic,then the system will exit from the looping, in this case if there 10 item in PR, and the 1st item error , then it'll pop out the error msg w/o check another item.Also the error message text is so short to cover all item error message,you should find another workaround ,like you check per item if meet the condition that you store it to table,then in the end of the check you put the error message if the table if filled.so the user can check the error in a report,not on the spot in transaction.

C8180 On Off error msg and Photo Tray Error msg

I have a C8180 AIO printer with the two problems above. Upon turning the printer on the LCD announces that I should always use the on off button and not unplug it even tho It's always been plugged in. After I press OK the photo paper tray msg states the tray is not pushed in all the way so I push the tray in to no effect. The printer recycles and displays the same error msg again and again and again.
This is a show stopper. As long as this error msg is displayed I can't print. I've seen these error msgs in the forums for other models in the 8100 series but I've never run aross a solution. This printer was used with XP Sp3 and Vista. However, the problems exist even when not connected to the PC in any way. I would appreciate any suggestions.

Removing all the cartridges, power cycling from the wall, and replacing them did the trick for my C6140. Great solution!!!
I feared I had broken it by using the main tray instead of the smaller photo tray for 4x6 paper, which resulted in grinding noises. As soon as the cartridges were removed, it was able to suck in and push back out the photo tray.
-Barry.

I get this error msg - Permission denied for to webpage get property XPCComponents.classes

A couple of days ago I started geting the error msg -Permission denied for to <webpage> get property XPCComponents.classes. It happens with every webpage I visit. If I hit the x in the upper righthand corner I can then access the page. This doesn't have in IE. Any ideas how I could fix this and why it started happening?

Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''
If you look in the Error Console for that '''XPCComponents.classes''' error, there should be a '''Source file: chrome://''' address which might give us information related to which extension is causing that message.
Firefox button > Web Developer -> Error Console or just use {Ctrl + Shft + J} from the keyboard

Error msg IM258 on trans IW21

Hi all,
when i use the user exit - QQ00014 and send error msg,when i click Enter i got the msg IM258 - Object does not exist. and get out of the trans.
Does anybody handle with this problem?
Tks.
David

hi,
try to use these exits for IW21.
Transaction Code - IW21                     Create PM Notification - General
Enhancement/ Business Add-in            Description
Enhancement
IWOC0004                                Change single-level list editing PM/QM/SM ALV settings
IWOC0003                                PM/SM authorization check of ref. object and planner group
IWOC0002                                PM/SM notification: Check whether status change is allowed
IWOC0001                                Create PM/SM notification: Determine reference object
IWO10027                                User exit: Generate user-defined settlement rule
IWO10026                                User check on setting status 'Do not perform'
Business Add-in
IQS0_STATUS_MAINTAIN                    Control of Changeability of User Status
IWO1_SUBSCREEN_0170                     Display Additional Data on Object Screen 0170 PhysicalSample
IWOC_LIST_TUNING                        Performance Tuning for Lists in PM/CS
IWOC_OBJECTINFO_CHNG                    Changes to Data of Object Info Screen
WOC_FL_DETERMINE                        Determine Date for Determining Installation Loc. Equi.
NOTIF_AUTHORITY_01                      Additional Authorization Checks for the Notification

Its not at all startning and not giving any kind of error msg, and i restared pc many times and uninstall and installed many times, but still its not opening

.its not at all startning and not giving any kind of error msg, and i restared pc many times and uninstall and installed many times, but still its not opening

Also, if you downloaded earlier in the week, make sure you have the 37.0.1 updated that was released on Friday (I think).
If needed, I suggest installing a slightly different way the next time:
'''Clean Reinstall'''
We use this name, but it's not about removing your settings, it's about making sure the program files are clean. As described below, this process does not disturb your existing settings. Do NOT uninstall Firefox, that's not needed.
(1) Download a fresh installer for Firefox 37.0.1 from https://www.mozilla.org/firefox/all/ to a convenient location. (Scroll down to your preferred language.)
(2) Exit out of Firefox (if applicable).
(3) Rename the program folder
''(64-bit Windows folder names)''
C:\Program Files (x86)\Mozilla Firefox
to
C:\Program Files (x86)\OldFirefox
''(32-bit Windows folder names)''
C:\Program Files\Mozilla Firefox
to
C:\Program Files\OldFirefox
(4) Run the installer you downloaded in #1. It should automatically connect to your existing settings.
Any difference?
Note: Some plugins may exist only in that OldFirefox folder. If something essential is missing, look in these folders:
* \OldFirefox\Plugins
* \OldFirefox\browser\plugins

Error msg upon exit homesite

Similar Messages

Maybe you are looking for