Error msg while assigning sales area ( A ) customer to sales area ( B)

dear friends,
I have created four account groups - SP ,SH, PY & BP respectively.
And i have four sales areas - A, B, C , D, so i created 3 different customers in each sales area under sold to party account group.
Actual problem is when i am trying to edit partners functions for a customer 'X' in sales area - A ....... it is accepting customers which are from sales area - A only.
But i have to use some of customers from other Sales area - B and assign them to the customer 'X' in the sales area - A .
checked all possible assignments ( i.e,) common - distribution channels, divisions, sales org etc
please tell me where i went wrong.
thanks & regards
vivek

hi shiva,
Thanks for the reply.
I have checked the assignments the dis.channel and division not but still its not working shiva.
Is there any other alternative to resolve this query
thanks
vivek

Similar Messages

Error in PPMOD feature while assigning functional area under company code.

Hi Experts,
I am getting error in PPMOD feature while assigning functional area under company code.
The error is " The total fields lengths of the decision operations are too great ".
Please advice.
Regards,
IFF

Hi IFF,
The return values which you have maintained for the decision parameter are not acceptable that's why it's throwing that error.
Your PPMOD feature is based on company code and functional area.
Try to maintain it as follows:
000010                                  D     BUKRS
000020     1000           D     FKBER
000030     1000 0001                 &PPMOD=1,
000040     1000 ****                 &PPMOD=2,
000050     2000                 &PPMOD=1,
000060     2100                 &PPMOD=2,
000070     2900                 &PPMOD=2,
000080     2910                 &PPMOD=1,
000090     ****                 &PPMOD=2,
Please try to create this features value again using tree format, so that you can know the actual length of the return string and update the thread once done.
Edited by: pdk_hcm on Sep 6, 2011 2:30 PM

Error msg while using i pod touch on bose sounddock

i got an error msg while using my ipod touch on a bose sound dock... it is still working fine it just said error not comatible with i pod touch, was this just a little second glitch, everything is still working fine dock is brand new, is there anything i should be aware of?

Have you contacted Bose/went to their support site?
You can try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Getting error msg while inserting a record

HI
Am getting error msg while am inserting a new record. Am unable to view the data that i inserted in to database. If any one can help in sorting of the problem plz help. I used the following code in Application Module(AM) and Controller(CO)
processRequest()
-- am.invokeMethod("insertmethod");
processFormRequest()
-- if(pageContext.getParameter("Create")!=null)
-- am.invokeMethod("savemethod");
In AM Code
public void insertmethod()
EOVOImpl vo=getEOVO1();
if(!vo.isPreparedForExecution())
{ vo.executeQuery(); }
Row ro=vo.createRow();
vo.insertRow(ro);
ro.setNewRowState(Row.STATUS_INITIALIZED);
public void savemethod()
{ OADBTransaction oa=getOADBTransaction();
oa.commit(); }
Error
Attribute SummaryFlag in kiInsertAM.kiInsertEOVO1 is required

Hi,
Either on the form you don't have SummaryFlag field or you forgot to map VO attribute i.e. SummaryFlag to that field.
If you don't have SummaryFlag field on form then you need to set it programatically before committing record.
Please check and let us know.
Regards,
Mukesh Uchaniya

Error msg while downloading or visiting iTune store: "network connection was lost". Any idea about the problem?

I am getting for the last days a constant error msg while downloading or visiting iTune store: "network connection was lost" (sometimes also ways it was "reset" instead). But, the network is working (I can make othe rdownloads and visit to other internet sites). Any idea about the problem?

Mac server or Windows server? Have you checked her permissions/access vs another user not having the issue?

Error occurd while creating sales order, plz help

while i am creating a sales order, i got a error like this, version 0 is not defined for the fiscal year 2008. when i press error msg it shows like this The version 0 is not defined in controlling area 1000 for the fiscal year 2008.
You have to maintain the fiscal year-dependent version parameters for all actual versions for which multiple valuation is updated.
System Response
The version 0 cannot be used for fiscal year 2008.
Procedure
Maintain the fiscal year-dependent version parameters for the version 0.
Execute function

Hi
Maintaining Versions
Transactioncode
SPRO
Choose SAP Reference IMG.
Choose Controlling -> General Controlling -> Organization.
Choose for Maintain Versions.
http://help.sap.com/saphelp_46c/helpdata/en/03/fb58b00d9611d3b65e0000e82d962e/content.htm
Regards
Jitesh Mehta

Error throwing while creating sales order

Dear all,
While on sales order creation,We have entered order type,sales organization,distribution channel,divison,
on entering sold to party,presssing enter,error is throwing as
No customer master record exists for sold-to party
actually customer master record is already created,
We need to extend the sales area then only system is allowing to create sales order,
Is there is any setting missing in configuration ?
Thanks
Jeyakanthan

hi,
can be done in two ways
1, only for the paticular customer
goto XD01 and extend the customer by entering new sales area above
and the already exisisting sales area in the reference
2,common distribution channel and common division(this is for all the customer created in that particular sales area)
IMG>sales and distribution>master data
regards
senya

ORA-20100: Error occurred while parsing (from xml in custom schema)

Hi,
I am using xmlParser and xmlDom to extract information from xml document. My whole process works perfectly in the APPS schema on the Oracle e-Business Suite. The minute I move it to a custom schema (ie new User) I get this error.
ORA-20100: Error occurred while parsing: Element '' used but not declared.
This only occures at runtime. I am pretty sure I grant the correct SELECT and EXECUTE privileges to this Schema. If I hadn't then it would not compile. It compiles without errors on the Database.
Any help will be appreciated.
Thanks in advance.
Regards
Dave

I just tried this again. I have Oracle9i 9.0.1.1 on my Windows
2000 laptop.
I went to OTN and downloaded the XDK 9.0.2D for PL/SQL
I used loadjava to load the \oracle\ora90\rdbms\jlib\xdb_g.jar
file into the database (shouldn't have had to do this) into the
XMLBOOK account. Filed a bug for needing to do this by hand.
I ran "xdkload.bat" with xmlbook/xmlbook as the username/password
I made sure the proxy server name was set correctly in the
example (if you don't need a proxy server, comment out that line
in the parse_xml_news.sql example, or that could cause your
error!!)
I ran the parse_xml_news.sql script, and I get:
Top Stories on XML from Moreover.com on December 21st, 2001
( 1) CEO highlights Mercator Softwares single biggest opportunity
( 2) WWRE Chooses webMethods
( 3) WebMethods, retail exchange ink deal
( 4) Worldwide Retail Exchange Chooses webMethods
( 5) Worldwide Retail Exchange Chooses webMethods
( 6) WorldWide Retail Exchange choses webMethods for integration
( 7) XML: Wherever You Go, There You Are
( 8) Chap. 13: Metadata
( 9) Enterprise Adoption of XML Made Simple
(10) XML Databases
(11) Using CSS2 to display XML documents
(12) How XML could bring an end to all of your troubles
(13) Effort Launched To Bring Classic Macs Rich Metadata To Mac
(14) Sneak attack on Pearl Harbor roused publics anger, resolve
(15) Drug dogs whiff worth $230,000
(16) PORTLAND Police target
(17) 11-year-old cant seem to get out of jury duty
(18) Another casualty of war: Proposed waterfront museum
(19) webMethods Establishes Sales Operations in Brussels
(20) Using Emacs for XML documents
(21) Gates: XML could be everything we dreamed...
(22) XML: The end of all your troubles?
(23) Java XML
(24) Tool To Compare XML Files
(25) Fairfax County Sends webMethods to School
(26) webMethods Embraces Web Services
(27) WebMethods Supports Web Services
(28) Accessing metadata through Reflection
(29) When format is foremost
(30) Views from Abroad: XML Pipelines and Delta XML

Getting error msg while posting entry in GL using F-02

Hi gurus,
While i am posting entry in GL using F-02 getting error message as "no controlling area has been assigned to company code"
can any help me out at the stage i dint want to configure co settings is there any way to pass the entries
Thanks & regards
Nandini

Hi Nandini,
Have you defined a GL account as a cost element? I think you have multiple company codes which are using same chart of accounts and this company code is also using the same chart of accounts. And also you have configured single controlling area for all company codes. Even though you have not assigned this company code to controlling area. The cost elements will create at controlling area level.
Due to this system is throwing error message.
Please check and let us know if you have other issue.
Regards,
Mukthar

Receiving error msg while trying to erase authorization in order to re-authorize

I downloaded an ebook from my school library and also downloaded adobe digital editions, my acct is [email protected]
When I tried to launch my ebook I received an error msg “error! Check activation”
The help desk asked me to erase my digital editions authorization and re-authorize. I tried to erase my authorization and I received another error msg “unable to Erase Authorization. Please try after some time.”

Nope, it can't be that because this is what I get if I delete the appIdKey:
Please accept our apologies!
There was a problem processing your request.
( No application id key has been specified! )
Please try again later.
I'm slowly coming to the conclusion that Apple really isn't interested in Macs in the enterprise. It's core customer base is either the home user or movie/publishing people and it just doesn't have time for us poor enterprise people in the middle. The many shortcomings of Apple Remote Desktop from a remote administration point of view (at least on Intel iMacs, on which it's extremely flaky) and the apparent abandonment of this forum by Apple are not encouraging.
Intel iMac 20" Mac OS X (10.4.10)

Error msg while processing a PO

Guys, while processing a PO i enounter an error msg "NO SHORT TEXT MAINTAINED IN LANGUAGE DE"...is this an error with the master ???

Guys, while processing a PO i enounter an error msg "NO SHORT TEXT MAINTAINED IN LANGUAGE DE"...is this an error with the master ???
Do you think it's a right place to ask this question? I don't.
Have a Coffee Break and then think friend
Regards,
Nick Loy

Error received while changing sales order.

Hi All,
while changing sales order we have received error message "An internal program error has occured.See note 44283".
So could you plesae explain me what needs to be done.
Thanks in advance.

To avoid to store inconsistent data in the future, activate the following method of the BADI                           BADI_SD_SALES:
> 1 - Transaction SE18
> 2 - Definition name: BADI_SD_SALES Menu: Implementation -> Overview double-click on implementation: IM_CORE_CHECK
> 3 - Now you will get an overview on the methods and you see also that the implementation IM_CORE_CHECK is inactive
> 4 - Press the change button and activate
This check works in the following way:
> 1 - if the number of items is less than 10 and there is an inconsistency the system will not store the data and an A-message will occur.
> 2 - If the number of items is greater than 10 and less than 50 and there is an inconsistency the data will be stored and an I-message will occur.
> 3 - if the number of items is greater than 50 there is no check because performance.
Edited by: Gerard Magorrian on Aug 6, 2010 4:01 PM

Getting an error msg while trying to run the java class from CMC

Hi All,
I am getting an error, while trying to run the java .class file, that which is imoported into CMC.
Error msg:
Exception in thread "main" java.lang.UnsupportedClassVersionError: Bad version number in .class file
     at java.lang.ClassLoader.defineClass1(Native Method)
     at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
     at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
     at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
     at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
     at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
     at com.crystaldecisions.sdk.plugin.desktop.program.internal.ProgramWrapper.main(ProgramWrapper.java:49)
I have imported .class file into CMC and trying to invoke the .class file by another java program from eclipse..When i tried to invoke the .class in cmc, i am getting an error msg, mentioned above. I thought there might be version conflict. So i changed the java complier version to 1.5 in my Eclipse. After that is done again i am facing the same problem.
Can anyone help me to resolve this issue?
Thanks in Advance.

i have installed BO SDK 3.1 , Service pack 3. It comes woth JDK 1.5 version. i have not done any chnages to it. I impoprted all the jar files related to BO into eclipse.
1) Actually, i am writing java code on eclipse. When i run code from the eclipse, it creates a session to cmc and creates folder structure what i need.
2) But the thing is, that code needs to run, when i import the .class file into cmc. The process how i imported the .class file to cmc.
Manage> Add> Program File-->Java (Check Box). In this way i added java class file from the eclipse workspace (class file from the bin directory).
3) So when i run the .class file externally by another java program or also when i log in to CMC and run that .class file, the instance shows sucess, but when i see the logfile i am getting an exception that which i mentioned above.
If my method is worng can you please let me know the stepts how to run java program in cmc.
Thanks in Advance

2 error msgs while synching to I-pod touch. "An error occurred while writing to the device. Also, I-pod cann be synced, required disk cannot be found.

Two error messages appear while trying to synch to I-pod touch. "I-pod cannot be synced. An error occurred while writing to the device." Second msg: I-pod cannot be synced, required disk cannot be found."

The latter error can usually be resolved by deleting the iPod Photo Cache folder. See the following for its location.
iTunes: Photo sync creates iPod Photo Cache folder
For the former error, I would try again. Then I would reset the iPod and try again.
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next I would restore the iPod.

BB Desktop Mgr Error Msg While Syncing

Hello all,
I have a BB Storm 9530 (all updated) and an using BB Desktop Mgr for Mac (iMac all updated). I am Syncing via USB with the standard Mac programs (Address Book, ICal, Media, etc.)
When Syncing, an error box appears when the sync icon is spinning/hanging by the Contacts. The BB Desktop software icon in the Dock jumps up. The error box (useless for troubleshooting) says "A Sync error occurred. Please retry the sync.) When I click "ok" the sync continues & finishes.
ANALYZING THE "LOG" FILE, I SUSPECT THE FOLLOWING:
2009-10-16 08:43:25.795 ERROR*** default pimSync Exception during sync: Unable to fault in data reference Data with length 13558
2009-10-16 08:43:25.795 ERROR*** default pimSync An exception of type ISyncDataReferenceException occured because: Unable to fault in data reference Data with length 13558
Additionally, in the BB Desktop Mgr software screen, there is an asterisk/triangle on Calendar (only) that says "One or more of the selected calendars are read-only and can only be sync'd from you computer to your device". I suspect this is the "birthday" object (read only) which is unchecked. How do you deal with this? Why is it an error/warning?
I am disappointed to find that BB/Apple do not support this new software product with a telephone/chat/email submission. Hopefully, you all can help!
Thanks in advance!
Pat S, NY
Thanks in advance for any assistance!
Pat S., NY

Thank you for your reply. The sync process "completed" (went past contacts and through the media) but an error msg appeared that said that there was an error and that I should re-sync. I do not know if each/every item was successfully merged. I wish there was a way to know what the error was and what did not sync. I was hoping someone would have an understanding of the two log lines I posted. Thanks!
Thanks in advance for any assistance!
Pat S., NY

Error msg while assigning sales area ( A ) customer to sales area ( B)

Similar Messages

Maybe you are looking for