Error msg while using i pod touch on bose sounddock

i got an error msg while using my ipod touch on a bose sound dock... it is still working fine it just said error not comatible with i pod touch, was this just a little second glitch, everything is still working fine dock is brand new, is there anything i should be aware of?

Have you contacted Bose/went to their support site?
You can try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Similar Messages

Essbase error msg while using Excel add-in: data item found before member

We're encountering an Essbase error message "data item found before member" on 2 of 4 cubes. Has anyone else encountered this msg, and does anyone have an idea how to resolve it. It occurs on multiple machines in development and testing environments.

As dougadams said, some members can be converted by Excel so that essbase no longer treats them as labels. Typically this includes numeric member names (i.e. accounts) and dates. I find the dates to be more of an issue than numeric member names, because it typically changes the date format as well. Either way, using a single quote as a prefix to the member name will tell Excel to treat it as a text entry, and hence a member/label to Essbase.The above is almost always the reason for the error you got. Of course, it's also possible that you really do have a numeric entry somewhere before your first 'data cell' in the template, especially if you did some manipulation of the template.

Getting error msg while using SFP tcode to use intaractive ADOBE forms

Hi All,
I wanna make use of Adobe intractive forms in one application. when i use transaction SFP and click on the layout tab i get following error message.
Could not start Layout Designer (see long text)
Message no. FPUIFB086
Diagnosis
The forms design tool for developing the form layout could not be started; either it is not installed or there are errors in the installation.
Procedure
Make sure that you have the forms design tool installed on your desktop (the tool is part of the SAPGUI installation).
Also read SAP Note 801524.
I looked for the same issue on SDN and someone resolved it after installing 'SAP JAVA Stack'. I raised an AHD for the same but CCD guyz say that there is nothing like that.
Can anyone suggest solution for this if you have faced same issue.
Thanks!

Check the port numbers 8888 is allowed by default to Oracle WebCenter Spaces
http://docs.oracle.com/cd/E14571_01/core.1111/e10105/portnums.htm#ASADM432
don't know exaclty how you can change the port, maybe in config files
see this thread :
{message:id=4446974}
Regards
Jean-Yves
Edited by: JeanYves Bernier on 15 déc. 2012 00:20

Getting error msg while inserting a record

HI
Am getting error msg while am inserting a new record. Am unable to view the data that i inserted in to database. If any one can help in sorting of the problem plz help. I used the following code in Application Module(AM) and Controller(CO)
processRequest()
-- am.invokeMethod("insertmethod");
processFormRequest()
-- if(pageContext.getParameter("Create")!=null)
-- am.invokeMethod("savemethod");
In AM Code
public void insertmethod()
EOVOImpl vo=getEOVO1();
if(!vo.isPreparedForExecution())
{ vo.executeQuery(); }
Row ro=vo.createRow();
vo.insertRow(ro);
ro.setNewRowState(Row.STATUS_INITIALIZED);
public void savemethod()
{ OADBTransaction oa=getOADBTransaction();
oa.commit(); }
Error
Attribute SummaryFlag in kiInsertAM.kiInsertEOVO1 is required

Hi,
Either on the form you don't have SummaryFlag field or you forgot to map VO attribute i.e. SummaryFlag to that field.
If you don't have SummaryFlag field on form then you need to set it programatically before committing record.
Please check and let us know.
Regards,
Mukesh Uchaniya

System error message while using maps check in

today i got a lot of system error messages while using maps check in feature, and i tried everything from factory default to reinstalling mobile software and formating everything and yet nothing changed idk what to do and i use the maps application a lot of times so i need this problem fixed please
am using Nokia 500 btw

today i got a lot of system error messages while using maps check in feature, and i tried everything from factory default to reinstalling mobile software and formating everything and yet nothing changed idk what to do and i use the maps application a lot of times so i need this problem fixed please
am using Nokia 500 btw

WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.

I have two forests with a transitive on-way trust between them: PROD -> TEST (test trusts PROD). I had previously had kerberos authentication working with winrm from PROD to machines in TEST. I have verified the trust is healthy, I also verified users
in TEST can use WINRM with kerberos just fine. Users from PROD cannot connect via kerberos to machines in TEST with winrm.
I have verified the service has registered the appropriate SPNs. I ran dcdiag against all my PROD and TEST domain controllers and didn't find anything that would prevent kerberos from happening. I even tried disabling the firewall entirely on my TEST dcs
but that didn't gain me anything.
I've enabled kerberos logging but only see the expected errors such as it couldn't find a PROD SPN for the machine, which it shouldn't from what I understand, it should go to the TEST domain and find the SPN from there.
I'm really out of next steps before I call PSS and hope someone here has run into this and could provide me some next steps.
PowerShell Error:
Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (:) [], PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionStateBroken
winrs Error:
Winrs error:
WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config.

Hi Adam,
I'm a little unclear about which SPNs you were looking for, in which case could you confirm you were checking that on the computer object belonging to the actual destination host it has the following SPNs registered?
WSMAN/<NetBIOS name>
WSMAN/<FQDN>
If you were actually trying to use WinRM to connect to the remote forest's domain controllers, then what you said makes sense, but I was caught between assuming this was the case or you meant another member server in that remote forest.
Also, from the client trying to connect to this remote server, are you able to telnet to port 5985? (If you've used something other than the default, try that port)
If you can't, then you've got something else like a firewall (be that the Windows firewall on the destination or a hardware firewall somewhere in between) blocking you at the port level, or the listener on the remote box just isn't working as expected. I
just replied to your other winrm post with steps for checking the latter, so I won't repeat myself here.
If you can telnet to it and the SPNs exist, then you might be up against something called selective authentication which has to do with how the trust was defined. You can have a read of
this to learn a bit more about selective trusts and whether or not it's affecting you.
Cheers,
Lain

Error 7 Windows error 14001 while using iTunes on my windows XP, please help

Error 7 Windows error 14001 while using iTunes on my windows XP, please help

Hello Zaza2006,
Thanks for the question, and welcome to Apple Support Communities.
The following article outlines the exact error message you provided, and steps that may lead to a potential resolution:
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/TS3074
Thanks,
Matt M.

HT1212 I just bought a used i pod touch from work but the screen says Ipod is disabled, how do i clear that to get back and enter in the passcode

I just bought a used i pod touch from work but the screen says Ipod is disabled, how do I clear that to get back and eneter in the passcode?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Runtime error ASSIGN_TYPE_ILLEGAL_CAST while using ASSIGN key word

Hi All,
I'm getting a runtime error ASSIGN_TYPE_ILLEGAL_CAST while using ASSIGN keyword in the below statement,
ASSIGN L_XVALUE(L_LENGTH) TO <TEXTLINE> TYPE 'C'. "see 581444
Here L_XVALUE is of type X with value 'ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S' , L_LENGTH is of type I with value 51 and <TEXTLINE> is of type C wih one character length .
Should I have to declare <TEXTLINE> as same as that of L_XVALUE ( type X ).
Thanks in Advance,
Sabu.

Decalre <TEXTLINE> as type any.

While using IBOOKS I touched something on the screen and the screen went blank. Can't get normal screen back.

While using IBOOKS I touched something on the screen and the screen went blank and I can't get back to normal IBOOKS screen. How do?

Try to reset your device:
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

Can I use I-pod touch 4g to fax

Can I use I-pod touch 4g to fax

See the app store. Fax print and share. See if that is what you need.

Error msg while downloading or visiting iTune store: "network connection was lost". Any idea about the problem?

I am getting for the last days a constant error msg while downloading or visiting iTune store: "network connection was lost" (sometimes also ways it was "reset" instead). But, the network is working (I can make othe rdownloads and visit to other internet sites). Any idea about the problem?

Mac server or Windows server? Have you checked her permissions/access vs another user not having the issue?

I have a mid-2009 MBP and I've been using my BOSE Companion 20 with it for about half a year now. It was fine until recently, when i want to adjust the volume using the pod on the BOSE Companion 20, it will cause like a surge in volume, spiking it up

I have a mid-2009 MBP and I've been using my BOSE Companion 20 with it for about half a year now. It was fine until recently, when i want to adjust the volume using the pod on the BOSE Companion 20, it will cause like a surge in volume, spiking it up and down. It will not stablise itself! It's very fustrating. Anybody with the same issue?

I have the BOSE Companion 5 speakers and have had the same problem. I've searched everywhere and gotten nowhere. My speakers are way past their warranty, so calling Bose would probably get me no where either. Only thing I can think of is that the speakers overheat which causes the spikes in the volume. I've tried unplugging them for a few minutes and then plug them back on. The problem does go away, but after about 5 minutes, same problem.

2 error msgs while synching to I-pod touch. "An error occurred while writing to the device. Also, I-pod cann be synced, required disk cannot be found.

Two error messages appear while trying to synch to I-pod touch. "I-pod cannot be synced. An error occurred while writing to the device." Second msg: I-pod cannot be synced, required disk cannot be found."

The latter error can usually be resolved by deleting the iPod Photo Cache folder. See the following for its location.
iTunes: Photo sync creates iPod Photo Cache folder
For the former error, I would try again. Then I would reset the iPod and try again.
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next I would restore the iPod.

Error msg while processing a PO

Guys, while processing a PO i enounter an error msg "NO SHORT TEXT MAINTAINED IN LANGUAGE DE"...is this an error with the master ???

Guys, while processing a PO i enounter an error msg "NO SHORT TEXT MAINTAINED IN LANGUAGE DE"...is this an error with the master ???
Do you think it's a right place to ask this question? I don't.
Have a Coffee Break and then think friend
Regards,
Nick Loy

Error msg while using i pod touch on bose sounddock

Similar Messages

Maybe you are looking for