Error msg: your sys doesn't have required screen resolution

Just downloaded & installed Presenter 9 trial version on my Win 7 system. My screen resolution only has two available settings, and neither one matches the precise resolution setting that the error msg says my system needs. What do I do?

It is due to the cable that you are using. For DVI, there are 2 main type of cables in the market, DVI-D Single Link & DVI-D Dual Link.
Extract from Wikipedia
If you are using a DVI-D Single Link cable, the max resolution natively is 3,840 × 2,400 @ 17 Hz, which is unusable under normal usage. The next best max resolution is 1440 × 900 @ 60 Hz which is usable under normal usage.
However, if you are using DVI-D Dual Link cable (not referring to Dual Monitor support here), the max resolution natively is 3,840 × 2,400 @ 33 Hz with GTF blanking, which is also unusable under normal usage. The next best max resolution is 2,560 × 1,600 @ 60 Hz with CVT-RB blanking, which is usable under normal usage.
For full information, please refer to this link at Wiki. http://en.wikipedia.org/wiki/Digital_Visual_Interface

Similar Messages

When I try to sync my iPhone I'm receiving an error msg that I do not have enough privileges for this opreation.

When I try to sync my iPhone I'm receiving an error msg that I do not have enough privileges for this opreation. Any advice how this can be resolved?

Google is your friend as this gets asked a lot.
http://www.google.com/search?source=ig&hl=en&rlz=&q=site%3Adiscussions.apple.com +iphone+privilages&aq=f&aqi=&aql=&oq=#hl=en&newwindow=1&safe=off&sa=X&ei=g97CTd6 YM432gAe6momCAg&ved=0CBYQvwUoAQ&q=site%3Adiscussions.apple.com+iphone+privileges &spell=1&biw=1680&bih=896&bav=on.2,or.r_gc.r_pw.&fp=c9365e657b732f11

After Update to iOS5, i can't synchronise my films, showing me 'error 19', your iPad doesn't support this videoformate..any ideas to solve my Problem?

After Update to iOS5, i can't synchronise my films, showing me 'error 19', your iPad doesn't support this videoformate..any ideas to solve my Problem?

To delete, tap "Edit" (tap to enlarge image)

Why don't I have the screen resolution I used to have on my iMac 2400.

I used to have several screen resolutions on my iMac 2400, now I only have two, 1920 X 1200 and 960 X 600.
Because I am a senior, my eyes need a resolution that provides clarity and is not too small. 960 X 600
prevents me from using Microsoft Office because I cannot select all of the options i.e. when I want to
print because the options are beyond the window and I cannot access them. 1920 X 1200 is too small
for my senior eyes.
Please update the graphics driver with the resolutions I used to have. More and more
seniors use computers and the younger developers need to understand this otherwise
they will switch to PCs.
Thank you
George R. Patty

Apple will only see your comments if you send them here:
Where to send product feedback to Apple:
http://www.apple.com/feedback/

I am getting an error saying "Your computer doesn't seem to support any version of Media Player". When I look at my list of plugins I do see that I have Window Media Player Firefox Plugin 1.0.0.8. Why am I getting this error?

I am trying to load a page & I get the error "Your computer doesn't seem to support any version of Media Player". I then go to the tools & to add ons & to plugins. There under the plugins is Windows Media Player Firefox Plugin 1.0.0.8. It is enabled. My question is what does this error mean? Do I have the Media Player I need or not?

Notes:
1) Please use the code tags when posting code or JNLP/HTML. It helps to retain indentation and avoids asterisks and plus sings being interpreted as formatting marks. To do that, select the code/JNLP etc. and click the CODE button seen on the Plain Text tab of the message posting form.
2) That launch file is invalid. You might check it (and the project in general) using JaNeLA.
3) The only place that SimpleSerial class could be, that the JRE would find, is in the root of aeon.jar. Is it actually there?

How do you install Adobe photoshop when your laptop doesn't have a CD drive?

Hi, I have a Lenovo Ultrabook Thinkpad (X1 Carbon) which doesn' have a CD drive. How can I install my copy of Adobe Photoshop Elements 10 which I have on CD-rom?
Thanks

Carolyn,
Does your Lenovo have a USB 2.0, or 3.0, or a FireWire port?
If so, then I see two methods, but they will involve other equipment, at some point:
Curt's suggestion should work just fine. However, you will need a computer WITH a multi-drive (either internal, or external). With that other computer (maybe even one on display in a computer/electronics store, or at a friend's house), just Copy the full installation disc(s) to a USB thumbdrive, and insert that into the USB port on the Lenovo.
Borrow, or buy, an external USB 2.0, or 3.0, or FireWire multi-drive, and use that to install from. If you borrow, I think that I would do it very slightly differently, and would Copy the installation disc(s) to my internal HDD, and install from there.
Possibility would be to download the program's installation file(s) for the trial (say from ProDesignTools - be sure to read ALL instructions carefully), install, then plug in your S/N to convert that trial to the full-paid version, and Activate. Obviously, you will need an Internet connection for this method. However, since you are posting here, it is very likely that you have an Internet connection available somewhere. This would probably be the way to go, if your Lenovo does not have USB, or FW.
Good luck,
Hunt

Macbook doesn't have the right resolution for external monitor.

I have a Macbook Pro runing OS X 10.7.5 and have a HP w1907 LCD monitor. When I have the Macbook open, I can get the proper resoulution of 1440x900 on the LCD while the monitors are Mirrored. But when the macbook is closed, the options for the LCd monitor are replaced by VGA display. The VGA Display options do not have the 1440x900 resolution option.
What do I have to do to get my monitor's native resolution back while keeping the macbook closed.

Aha - got luck: In Preferences/DIsplays click in the window and press 'Option' - the 'Gather Windows' button changes to 'Detect Displays' and when clicked, discoverd the correct resolution.
That does it.

Excel 14.1.0 (110310) on OSX 10.7.5 doesn't have Full Screen function

I have OSX 10.7.5 on 2009 MacBook with Excel 14.1.0 but I don't have Full Screen function. I Googled and am sure that this version of Excel and OSX should have Full Screen, but I just can't find it. If you can help I would greatly appreciate it. Thank
you very much!

I have OSX 10.7.5 on 2009 MacBook with Excel 14.1.0 but I don't have Full Screen function. I Googled and am sure that this version of Excel and OSX should have Full Screen, but I just can't find it. If you can help I would greatly appreciate it.
Thank you very much!
This may help?
https://support.office.com/en-au/article/Reduce-screen-clutter-for-easier-document-viewing-69bc197a-669d-4633-98c0-f219eb92ef09?ui=en-US&rs=en-AU&ad=AU
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Microphone doesn't work and screen resolution doesn't change to full screen

my laptop is Toshiba Satellite M300, i dont know the series, this is information from bottom label
TOSHIBA M300
T660 2048 320 14WC DMD agnBT 6C VBX 1Y
PSMDCL-08T010
69080277W
after i install windows 7,
1.why the microphone doesnt work???
2. why the sreen resolution not full screen when i play games??(in vista no proplem about the screen resolution)
thank you..

How did you upgrade? Clean?
Did you get your drivers here?
-Jerry

When I boot up my Win7 (64bit) PC, I receive the following error msg "the new Java Plug-In requires a recent version of the Firefox browser" I have reinstalled Firefox3.6.12 several times without any change?

I have reinstalled the latest JRE twice. Reinstalled Firefox3.6.12 twice but the following error message persists at startup "the new Java Plug-In requires a recent version of the Firefox browser(Firefox 3 or later)"

I have reinstalled the latest JRE twice. Reinstalled Firefox3.6.12 twice but the following error message persists at startup "the new Java Plug-In requires a recent version of the Firefox browser(Firefox 3 or later)"

Error msg: Current user does not have privileges to perform product Activation

I am running Adobe Photoshop CS 8.0 on Windows Home Vista platform.
I keep getting this error message when I try to open Photoshop:
Current user does not have privileges to perform product activation. Run this application from a user account with administrative privileges or contact your system administrator.
I am the only owner & user of this software. I have re-installed the SW once (full install), and the error message went away for a while.
Now it's come back.
What do I do now?

2 options:
Either disable UAC (User Access Controls) or run the application with Administrator rights.

Your app doesn't meet requirement 10.1.9 / 10.3.2

The mentioned requirements cannot be found in either the new (Windows and Windows Phone Store Policies) or the 'old' (App certification requirements for the Windows Store) requirements.
So how do I know what's wrong?
P.S. I wanted to paste the links to the requirements in the question but I am not allowed, because my account isn't verified (yet).

Hello Reware,
Please contact
Dev Center Support to have them take a look at the app failure itself.
-Miles
Windows and Windows Phone Dev Center Support
Send us your feedback about the Windows Platform

HT4623 What if your ipad doesn't have the softwear update bar on it in the genral settings... How do you update from he 4.3.3 version??

I really do not understand how to update my ipad i still have the4.3.3 version. How do i update it to the ios 6?

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

I've lost Norton toolbar, I've lost my printer connection, and your toolbar doesn't have any of the new features you hyped on it - and I've lost any indicator of the security level of a given page, critical!

How could you foist Firefox 4 off on us without warning about the problems? At least some of your complainants told me how I could get back to v. 3.16, I have saved it and will try to re-install over this.
I have Windows XP on a 3-year-old computer with fully updated Norton Security. I tried to upgrade to this because all of a sudden you were not supporting the e-banking site that gives me my bank statements. And because I trusted you to do good.

The new interface is only default on Windows Vista and Windows 7. To get it on Windows XP you need to hide the menu bar. To do that in the View menu select Toolbars, then click on the "Menu Bar" entry.
If you need access to the menus you can press either Alt or F10 to temporarily display them.
Symantec need to update their Firefox add-ons so that they are compatible with Firefox 4. They have indicated that for Norton 360 they plan to release an update to Norton 360 to support Firefox 4 in early May - http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20100720113635EN&ln=en_US
I do not know about the time scale for updates for other Norton products. Pending the update by Symantec, if you want to use the Norton add-ons you will need to downgrade to Firefox 3.6.
To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

Update was going fine until the error msg... now I have to restore phone completely??

I haven't had issues with other updates. This one's a doozy, and I don't have iCould backup activated. I suppose now I must restore and will lose everything? Not sure why my phone went into Recovery Mode when everything was going so well. Was updating through iTunes on a new iMac (not via wi-fi).

Bummer.
I finally decided that a restore was my only option, so I clicked it. I realized after that I could choose to restore to factory settings or choose what I had synced to iTunes. I sync often, so all of my stuff came back. It worked well, and I hope your problem is gone or soon goes away. I never backed anything up to iCloud and now realize that syncing to iTunes each time I charge is a great idea. I wish you the best.

Error msg: your sys doesn't have required screen resolution

Similar Messages

Maybe you are looking for