ERROR: NetExpress 5.0 path Not found - OUAF SDK 4.1 install

I was finally able to install the SDK with all your help but now I am looking at another problem.
In the installation document, after adding Eclipse it says:
Start Eclipse by opening the Oracle Utilities Software Development Kit Client Scripts directory
(Start ? All Programs ? Oracle Utilities Software Development Kit 4.0.0.x ? Oracle Utilities
Software Development Kit Client Scripts) and then double-clicking startEclipse.bat; x is the
build number.
This launches Eclipse with the Welcome tab shown.
When I run the .bat file I get the following error:
ERROR: NetExpress 5.0 path Not found ... at C:\OUAFSDK\SDK\4.0.0.5\Scripts\bin\getBinDirectory.pl line 52.
Nowhere in the install doc does it mention anything about NetExpress.
Any ideas?
Thank you.

Actually I was happy to soon.
After installing Net Express, I don't get that message anymore but nothing at all is happening. Eclipse should be starting according the the install guide. I am starting to wonder how accurate that guide is since quiet a few things are missing already. This is really frustrating.

Similar Messages

  • Error creating request. Path not found

    Hi,
    We are trying to create a request in CUP. We have given input in all the mandatory fields like Requester Name, Manager Name, Application and we have selected Roles. Those roles were already assigned to approvers.
    When we press the APPROVE button, it is asking to Approve. After clicking APPROVER button, it is giving error like u201CError creating request. Path not foundu201D.
    Please check and advice me where we are missing while creating request in CUP.
    Thanks & Regards,
    KKRao.

    Hi Sabita/Alpesh,
    Thanks for your reply. We have created two conditions under Initiator with AND and AND. We have cleared and we are not getting error like Path not found.
    Now we are getting error like "Error creating request. Approver not found".
    We have selected the Manger name in the request which we have defined in the Custom Approver Determinater. Still we are getting the error like Approver not found.
    Please check and correct me.
    Regards,
    KKRao.

  • CIM.bat giving error that weblogic lib path not found

    I am using atg 9.1 and weblogic 10.3.2. Installed both s/w and started weblogic server. I am using cim.bat to configure and I am stuck at a point where it asks for the app server I am using and I selected 'Weblogic' and when it asked for the path..I gave the correct path where weblogic is installed...but it says Weblogic lib path not found...even though I can see the server/lib directory...could you please help ?

    Yes, I did that...my weblogic is installed in c:\Oracle\Middleware\wlserver_10.3.2 and CIM gives a message that [c:/Oracle/Middleware/wlserver_10.3.2/server/lib] weblogic lib path not found
    Also I see c:\Oracle\Middleware\wlserver_10.3.2\server\lib directory and all the required weblogic files available in that directory.

  • SPM in CUP in a SAP GRC AC 5.3 -- "Approver not found" & "Path not found"

    hello,
    I have a problem when I try to do a request.
    I have configured the SPM in the CUP in a SAP GRC AC 5.3
    I gives me an error about "Error creating request. Approver not found ". When I took out the Manager in the Stage it gave me this error in the request "Error creating request. Path not found".
    Best regards.
    Pablo Mortera.

    You can either type in the configuration, like the what option you selected for approver (CAD or role or...etc), or other way is to capture the change log which shows what was the configuration for that stage....
    (Configuration -< Change Log -> Search Change log)
    Cheers !!
    Zaheer

  • Error "Run-Time Error '76' PAth Not Found" in XML Publisher Desktop

    Hi All,
    we are trying to preview the PDF output in the XML Publisher Desktop Application.
    We are able to LOAD the data successfully.
    But whenever we try to preview the output, we are getting an error saying "Run-Time Error '76' Path Not Found".
    We are using the XMLP Desktop application on the Client Machine.(Citrix)
    Can anybody help us in this regard?
    Thanks,
    Sachin.

    Hi.
    You are posting in the wrong forum.
    Please post to the BI Publisher Forum:
    BI Publisher

  • AE: Path not Found error

    Hi All
    When we create one workflow with one role requested the approval process works, but it does not work when we have one request for 2 roles from 2 different systems. Take note that on their own these roles create a workflow and the approval process works but when they are put together the "Path not found error" appears.
    Can anyone please advise on what the problem might be?
    Any input would be appreciated!

    Rodger,
    please have a look at the error log to see exactly what fails.
    I suppose that your initiator is limited to role + system, and you do not have defined a path for the second system, so AE does not know how to handle that part of the request.
    If you can detail what your initiator looks like, and what the error log says, we may be able to give you more detailed help.
    Frank.

  • " Path not found() "error when implementing single sign on

    Hi,
    We are implementing single sign on so that when users click on the "Reports Login" he is navigated to the obiee presentation services screen. For the reports login we have a .asp page which directs to the presentation services.
    I have done the necessary changes in the instanceconfig and credentialstore xml files.
    I have been receiving a strange error when I click on the reports login. I get the error
    Path not found ()
    Error Details
    Error Codes: U9KP7Q94
    I have checked the presentation server log file and I see the below error
    Type: Error
    Severity: 45
    Time: Tue Mar 09 09:18:44 2010
    File: project/websubsystems/ssportal.cpp Line: 1907
    Properties: ThreadID-2672;HttpCommand-Dashboard;Proxy-;RemoteIP-127.0.0.1;User-;Impersonator-
    Location:
         saw.subsystem.portal
         saw.httpserver.request
         saw.rpc.server.responder
         saw.rpc.server
         saw.rpc.server.handleConnection
         saw.rpc.server.dispatch
         saw.threadPool
         saw.threads
    Path not found ()
    Can anyone provide me an input how to resolve this issue?
    This is bit urgent for me.
    Thanks

    Hi,
    Please ensure that the navigational attribute is checked at the attribute level and also at the Infocube level and also check that correct mapping of this navigational attribute is done at the Multiprovider level.
    Thanks,
    Venkat

  • "Audio Record Path Not Found" error and new details

    I've been having problems opening up older GarageBand files I've created and trying to add new content. When I try to record on an existing track, or in a new track, I get the error: "Audio Record Path not Found! Please enter it in the following dialog." (and there's no following dialog). I've tried to save the file as an archive, which has worked in the past, but doesn't work any longer. I'm using a MacBook Pro Core 2 Duo 15"
    As a test, I installed iLife 06 on my older (PowerPC-based) Mac Mini. On that computer, I'm able to open the files, and record onto an existing track. None of my recording equipment is attached to this machine, however. If I save an archive and move it to my macBook Pro, I'm still not able to add recordings to it.
    I tried reintalling GarageBand on my MBP, but I still get the same error. I've also deleted the preference files from Library > Preferences. (the two com.apple.garageband... files), and still no luck. It doesn't sound like the audio files themsleves are corrupted since I can open them on the Mini, so it's likely GarageBand. What else can I delete to make it a pristine installation?
    I don't want to use my Mac Mini for recording, as it's too slow for my editing needs, but if I can't open the files on my MacBook Pro, I'll have to re-record them.
    Anyone have any ideas I can try?

    Excellent suggestion! I actually left the files on the external USB drive on which I store them, and accessed them from my MacBook Pro (instead of moving the files to the MacBook Pro), and sure enough, I'm able to edit and add to the files!
    I still don't know why I can't access them locally on the MBP, but this workaround is certainly acceptible for my needs!
    Thanks out to everyone who helped on this thread!
    Brian Ibbott
    Coverville.com
    The Cover Song Podcast

  • BI Scheduler - 'Path not found' error

    Folks,
    I'm trying to edit ‘My Account’ to set devices in ‘My Products’ -> Delivers.
    I could notice the fallowing error message and not able to create any device.
    Error Editing Device
    Path not found (/users/administrator/_prefs/devices/email)
    Error Details
    Error Codes: U9KP7Q94
    Please let me know where could things have gone wrong.
    Thanks in advance!!!
    Nithesh.

    Hi,
    I am getting the above problem.. can someone provide me thesolution for the same.
    Would be greatful!
    Thanks
    Aswini

  • A desktop is failing to join in Domain over a VSAT link. Error: Network path not found.

    Dear Friends,
          Facing an issue for adding a desktop in Domain over VSAT. When I say enter after typing the domain name which i want to join. I am asked for User name and Password. After User name and password is entered it waits for a long
    time and then it gives an error as Network Path not Found. I am pretty surprised why is it happening like that.
    In hosts file too I am mentioning the IP of the DC at my Data Center.
    I have another site over VSAT which has worst latency and more RTO's than this one, but on that site I am able to add a desktop in Domain. I don't have domain controller at the remote site which is connected by VSAT.

    Please do not hardcode the domain IP address in your HOSTS file. That will just create issues.
    Please make sure that your client computer points only to internal DNS servers for DNS resolutions.
    You can use NSlookup to make sure that DNS resolution for your DCs A and SRV records are working properly:
    http://social.technet.microsoft.com/wiki/contents/articles/29184.nslookup-for-beginners.aspx
    https://support.microsoft.com/en-us/kb/241515?wa=wsignin1.0
    Also, make sure that you have no connectivity failures between your remote site and the one having your DCs using
    ping: http://social.technet.microsoft.com/wiki/contents/articles/30110.ping-for-beginners.aspx
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • XML Publisher Loading data error "Run-Time Error '76' Path Not Found"

    Hi,
    I am trying to preview the PDF output in the XML Publisher Desktop Application.
    I am able to LOAD the data successfully.
    But whenever we try to preview the output, we are getting an error saying "Run-Time Error '76' Path Not Found".
    I am running in Vista OS and MS Office 2007.
    What to be done after this? Do I place the .xml and .xsd in Temp folder?
    Kindly pls help me out in this. It would be really a very great.
    Thanks & Regards,
    Santhoshkumar.M
    Edited by: 882342 on Aug 31, 2011 3:24 AM

    You must give your user full control to C:\program files\Oracle i.e. the folder where your BI Publisher or XML Publisher Desktop is installed, see http://boardreader.com/thread/xml_publisher_error_Run_Time_Error_76_Pa_lsptXmonb.html

  • Path Not found error when try to drag Navigational attribute in report

    Hi Gurus,
    I have created report on Multiprovider. When I try to drag navigational attribute in report getting error path not found.
    I have checked Following and it's Proper.
    1) Multiprovider is active
    2) whether Navigational attribute is identify assign in cubes.
    3) whether sid table thr for info-object.
    4) I could see data in Multiprovider as well as in Cube
    I created report on cubes also and getting same error.
    Please suggest.

    Hi,
    Please ensure that the navigational attribute is checked at the attribute level and also at the Infocube level and also check that correct mapping of this navigational attribute is done at the Multiprovider level.
    Thanks,
    Venkat

  • Error: Path not found. (WWC-50004)

    I get this message when I click on one of my categories either in my content area or my portal page.
    What could be the problem?

    We're running on NT. Using Oracle 8.1.7.1.1 and portal 3.0.7.1.1.
    It's a fresh installation, only the upgrade from 8.1.7.0.0 to 8.1.7.1.1 has been made.Also Portal is fresh not from any EA-release.
    Dont know if I can give any more details. Kind of hard to explain. But I have created several catagories and several folders with subfolders. And then set them to a appropiate category. One of these does not work , I get this 'Path not found wwc-50004'.Question, could it be some folder or perhaps Item in a folder using this catagory thats the problem? And in that case - how do I find the right folder?? If I know with folder then I can delete it and begin from scratch again. So far we are just in testing phase. But I would prefer NOT to delete all the folders created with this catagory selected

  • Changing 'Path Not Found ()' error

    Hi,
    Can anyone point me to where I can change the 'path not found ()' message a user gets when trying to access Dashboards and they have no access to any dashboards ?
    I've scanned all the files in the OracleBI\web\msgdb\l_en and I cant find anything ??
    can anybody point me in the right direction ?
    thanks

    As I said before this may happen if the Web Catalog directory had a user account already created with the same name. As you are migrating from a non-SSO setup to an SSO setup it seems that the Presentation Services thinks the SSO accounts are different than the non-SSO accounts and it tries to create a new account. As the directory already exist the creation fails and the user is then not able to read the previous user directory. I am not sure how you going to get around that. You might have to migrate the user folders manually. Perhaps you should raise an SR with Oracle.

  • SAP BPC 7.5 SP6 on Win 7 x64bit & MS Off 2010 - Path not Found errors

    Hi,
    We have currently started a test group of 16 users to test Win 7 before migrate the entire company. Some of the test users are in Accounting and they use SAP BPC 7.5 for their Budget and Forecasting. We have Win 7 x64 bit and MS Office 2010 installed. For one user, after logging into the Production server for BPC he opens the report library and he is unable to get certain macros to allow for different changes within the excel spreadsheet. For example, there is a section that asks him to change the company name. When he clicks on the field to do so it says "Path Not Found".
    Another user when he tries to open up a report, he gets "Loading Dimension information..(Customer)" then a popup comes and says File not found. We have tried to uninstall and reinstall BPC on the new machines to no avail.
    Any help you can provide would be great. If more information is needed, please let me know.
    Thanks,
    Lakiasha Walker
    IT Security Administrator

    Hi Lakiasha,
    Could you re-install .NET 2.0, .Net 3.0. .Net 3.5 framework on the machines and check the results.
    I guess you may need to upgrade your BPC server as well as client version to SP8 ( minimum) to work with MS office 2010.
    Regards,
    Deepak Kori

Maybe you are looking for

  • Reconciliation / Load from Resource

    Hey all, I have two LDAP resources. LDAP1 I can reconcile OK LDAP2 reconciles and IDM accounts created but all the users are deleted from the resource, the same is true if use the 'Load from resource' option. Both are using identical per-account work

  • What are characteristics of an application for clusterded environment?

    Hi Thank you for reading my post. What are characteristics of an application that should run in a clustered/high available environment ? imagine that we have an enterprise application with several web services and we need to run it in a cluster of ap

  • Philisophical Question:  Tools for synchronizing JSPs, Java Beans and XML?

    This is a "best practices" question... The JSTL and JSF tags provide a lot of support for minimizing the amount of text that must be included in a JSP page. For example: <c:out value="${customer.firstName}"/>This snippet will find an object named "cu

  • 3.1.3 update cannot see existing licensed installation 3.1.1

    Following upgrade to Lion I have seen a number of issues.... Downloaded 3.1.3 patch to apply to 3.1.1 currently installed as it will address the issues. 3.1.3 installer claims it cannot see the 3.0 installation. This was originally a Aperture 2.0 ins

  • Don't know how to delete admin account

    So as the title says I have no idea I used the laptop at first but then it was given to me I want to become the admin and delete the old one help I have satellite C855D-S5167