Error: !next command is internal
Hello dear community,
I have a problem with my several SF300-08 Switches. They lose their uplink port without any interference my myself of my employees. We a
I configure the uplink correctly and it works for some time but then the port changes and displays default config on that interface with a new msg "!next command is internal"
It happens randomly but on allways on the same devices. Even after i changed the uplink port from port 1 to port 8 it happened again. After that i swapped the switch for a new one and same result.
I hope someone can help me here since i didnt found enough good results on google nor here. If more infos are needed just tell me but I can't post full configs etc cause of data privacy of our company.
Hi,
I have the exact same problem as you with exactly the same model of Cisco Small Business Switch. I have 23 of these to set-up which will connect into a Nexus 5548!
If you define again what VLAN's are allowed access then it brings the trunk up, very strange and will investigate further as I need to get this resolved. I've had to disable UDLD as the Nexus port just disabled straight away when UDLD is enabled.
Similar Messages
-
Error: Helo command rejected: need fully-qualified hostname
Im trying to setup a SL Server as mail server for internal and external use (company.lan and company.net).
When I try to send to the internal (company.lan) I get the following error:
Helo command rejected: need fully-qualified hostname.
Here is my postconf -n output
I guess the error is in the line with the bold letters. How can I change it and should I?
Thanks
Kostas
Last login: Mon Nov 16 23:42:18 on console
server:~ admin$ postconf -n
biff = no
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
header_checks = pcre:/etc/postfix/customheaderchecks
html_directory = /usr/share/doc/postfix/html
inet_interfaces = all
mail_owner = _postfix
mailboxsizelimit = 0
mailbox_transport = dovecot
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
messagesizelimit = 10485760
mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
mydomain = COMPANY.lan
mydomain_fallback = localhost
myhostname = server.COMPANY.lan
mynetworks = 127.0.0.0/8,192.168.16.0
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtpdclientrestrictions = permit_mynetworks permitsaslauthenticated permit
smtpdenforcetls = no
smtpdhelorequired = yes
*smtpdhelorestrictions = rejectinvalid_helohostname rejectnon_fqdn_helohostname*
smtpdpw_server_securityoptions = cram-md5
smtpdrecipientrestrictions = permitsaslauthenticated permit_mynetworks rejectunauthdestination checkpolicyservice unix:private/policy permit
smtpdsasl_authenable = yes
smtpdtlsCAfile = /etc/certificates/server.COMPANY.lan.57680B96FCEC7F50F59A01D8F7DC4E841B2DB453.c hain.pem
smtpdtls_certfile = /etc/certificates/server.COMPANY.lan.57680B96FCEC7F50F59A01D8F7DC4E841B2DB453.c ert.pem
smtpdtls_excludeciphers = SSLv2, aNULL, ADH, eNULL
smtpdtls_keyfile = /etc/certificates/server.COMPANY.lan.57680B96FCEC7F50F59A01D8F7DC4E841B2DB453.k ey.pem
smtpduse_pwserver = yes
smtpdusetls = yes
unknownlocal_recipient_rejectcode = 550
virtualaliasdomains = $virtualaliasmaps hash:/etc/postfix/virtual_domains
virtualaliasmaps = hash:/etc/postfix/virtual_users
server:~ admin$Παρακαλώ (you are welcome) Kostas,
If mail is for internal use only, you can keep the .lan address as long as you authenticate to send.
If you need to send to external addresses, then make sure you use a valid e-mail address or your mails will be rejected by other mail servers.
HTH,
Alex -
I am having troubles, when I open LR I get a message that there is an error and it will try to fix the error next time it opens. LR closes on it's own, I reopen it and get that same message next time it opens, and this is going on and on where I can not use LR, any suggestions? If I click on a different set of photos in the libary before I get that message I might or might not get the message next time it oipens, but I still can not get to those photos, and it is not just one or two but most of my photos. HELP!!!!
Thanks
CarolThe first thing I would suggest is for you to go to the folder containing your catalog, using your system browser. There will be a folder that has the extension .lrdata. Delete that folder, and then try to start Lightroom. If that doesn't work, replace your catalog with your most recent backup.
-
I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried uninstalled and installing the app and the error remains. I have windows 8. Can anyone please help???
Use Windows Explorer to open the folder containing your catalog. The normal location is Pictures\Lightroom. Locate a folder with the extension .lrdata and delete that folder. Then you should be able to start Lightroom again, and Lightroom will begin building and new previews folder. Do not delete anything else.
-
Error while powering on: Internal Error
I have a fresh install of windows 8.1 with all the latest updates installed. Whenever I try to power on a virtual machine, I get the error "Error while powering on: Internal Error". I've searched the forums and tried all the suggested fixes including ensuring that the auth service is running, renaming the vmware.exe file and running vmware.exe as an administrator. Looking through the logs, it seems like there are major permissions issues, but I have no idea how to resolve them. Can anyone help? I've attached the relevant log files.
Hi hyjkim, and welcome to the VMware Communities!
What is your host system? You may need to check for BIOS/firmware updates for your host... it is reporting nonsense information to us, which is the cause of the failure.
If you are sure that your host machine has the latest BIOS/firmware updates applied, let me know and I'll provide a workaround suitable for your system.
Thanks,
Darius -
Error message while executing international payroll with schema x000
Dear Team,
I am getting the below error message while running international payroll with schema x000.
"Jump from DAYPR to detailed log
Incorrect generation of wage types"
Request forum members to help me on the same.
Thank you,
SrinivasHi,
Thank you for the reply please find below i reviewed all the below tables please gothrough and advice me if any i missed out.
1) T555E-Message Descriptions----
2) T551C-Period work schedule evaluation---
Grpg Period ws Description Start Date End Date Cntg Class
01 PWTC Period WS 01.01.1990 31.12.9999 1
3) V_551C_B-Valuation class for Periodic work schedule
Grpg Period ws Description start Date End Date Val.Classfor PWS
01 PWTC Period WS 01.01.1990 31.12.9999 1
4) V_t508A-Work schedule rule
ESG ES grpg for ws Holiday Text PSG WSrule St Date End Date
2 Salaried Employee TCD TC 01 TCWR 01.01.1900 31.12.9999
5) V_001P_H-Personnel Subarea grouping for Time Recording
Personnel area Personnel Area Text Personnel Subarea Pers.Subarea Ps Group
1100 JEDDAH 1110 MAIN OFFICE 01
6) V_T555Z- Time type Determination
Can you advice me on this what I need to maintain here
7) V_T510S-Time wage type selection rule
Tm.WT Dy Grpg No Wagetype Wage Type Long Text
54 01 001 1010 Basic Pay
Regards,
Srinivas -
Error"There was an internal error when submitting the form" URM Disposition
Hello
I get the following error - "*There was an internal error when submitting the form*" - when i allocate a Retention Disposition to a Retention Category.
Any Ideas how this can be solved?
Thank youNot based on the minimal information provided.
Error messages in 11g, from a UI standpoint, are severely deficient. How about looking in the content server logs and posting some more information? -
ERROR: executing command /usr/openv/netbackup/bin/bpbackup
Hi,
Online backup in one of our integration systems is failing with the followin reasons
Status = 58 : can't connect to client
Status = 54 : timed out connecting to client
The complete work log is
[843860.00] Backup started 08/29/2007 07:21:27
[843860.00]
[983220.02] Backup started 08/29/2007 07:21:27
[983220.02]
[880690.03] Backup started 08/29/2007 07:21:27
[880690.03]
[1085482.01] Backup started 08/29/2007 07:21:27
[1085482.01]
[843860.00] 07:22:07 Initiating backup
[983220.02] 07:22:02 Initiating backup
[880690.03] 07:22:12 Initiating backup
[983220.02] 07:22:34 INF - Waiting for mount of media id MY0015 on server spnb6master.apac.gdc for writing.
[843860.00] 07:22:49 INF - Processing /oracle/OMI/sapdata1/undo_1/undo.data1
[843860.00] 07:22:49 /
[843860.00] 07:22:49 /oracle/
[843860.00] 07:22:49 /oracle/OMI/
[843860.00] 07:22:49 /oracle/OMI/sapdata1/
[843860.00] 07:22:49 /oracle/OMI/sapdata1/undo_1/
[880690.03] 07:24:35 INF - Processing /oracle/OMI/sapdata3/omi_5/omi.data5
[880690.03] 07:24:35 /
[880690.03] 07:24:35 /oracle/
[880690.03] 07:24:35 /oracle/OMI/
[880690.03] 07:24:35 /oracle/OMI/sapdata3/
[880690.03] 07:24:35 /oracle/OMI/sapdata3/omi_5/
[983220.02] 07:24:55 INF - Beginning backup on server spnb6master.apac.gdc of client ipcby104b1.apac.gdc.
ERROR: executing command /usr/openv/netbackup/bin/bpbackup -w -t 17 -S spnb6masterb1.apac.gdc -c APAC_SAP_DC1 -s U_xx_1m -L /oracle/GIP/sapbackup/backint/.backint.log.1.1188372087.561352 -k ".bdwaniws.lst561352" -f /oracle/GIP/sapbackup/backint/.backint
Status = 58 : can't connect to client
[1085482.01] EXIT STATUS 58: can't connect to client
ERR - job (1085482) failed status (58)
[880690.03] 07:25:38 /oracle/OMI/sapdata3/omi_5/omi.data5
[880690.03] 07:25:38 INF - Processing /oracle/OMI/sapdata3/omi640_11/omi640.data11
[880690.03] 07:25:38 /oracle/OMI/sapdata3/omi640_11/
[983220.02] 07:26:25 INF - Server status = 54
[880690.03] 07:26:41 /oracle/OMI/sapdata3/omi640_11/omi640.data11
[880690.03] 07:26:41 INF - Processing /oracle/OMI/sapdata4/omi_6/omi.data6
[880690.03] 07:26:41 /oracle/OMI/sapdata4/
[880690.03] 07:26:41 /oracle/OMI/sapdata4/omi_6/
[880690.03] 07:27:44 /oracle/OMI/sapdata4/omi_6/omi.data6
[880690.03] 07:27:44 INF - Processing /oracle/OMI/sapdata4/omi_9/omi.data9
[880690.03] 07:27:44 /oracle/OMI/sapdata4/omi_9/
ERROR: executing command /usr/openv/netbackup/bin/bpbackup -w -t 17 -S spnb6masterb1.apac.gdc -c APAC_SAP_DC1 -s U_xx_1m -L /oracle/GIP/sapbackup/backint/.backint.log.2.1188372087.561352 -k ".bdwaniws.lst561352" -f /oracle/GIP/sapbackup/backint/.backint
Status = 54 : timed out connecting to client
[983220.02] EXIT STATUS 54: timed out connecting to client
ERR - job (983220) failed status (54)
[843860.00] 07:28:28 /oracle/OMI/sapdata1/undo_1/undo.data1
[843860.00] 07:28:28 INF - Processing /oracle/OMI/sapdata1/omi640_4/omi640.data4
[843860.00] 07:28:28 /oracle/OMI/sapdata1/omi640_4/
[880690.03] 07:28:40 /oracle/OMI/sapdata4/omi_9/omi.data9
[880690.03] 07:28:40 INF - Processing /oracle/OMI/sapdata1/omi640_3/omi640.data3
[880690.03] 07:28:40 /oracle/OMI/sapdata1/
[880690.03] 07:28:40 /oracle/OMI/sapdata1/omi640_3/
[843860.00] 07:29:32 /oracle/OMI/sapdata1/omi640_4/omi640.data4
[843860.00] 07:29:32 INF - Processing /oracle/OMI/sapdata2/omi640_10/omi640.data10
[843860.00] 07:29:32 /oracle/OMI/sapdata2/
[843860.00] 07:29:32 /oracle/OMI/sapdata2/omi640_10/
[880690.03] 07:29:47 /oracle/OMI/sapdata1/omi640_3/omi640.data3
[880690.03] 07:29:47 INF - Processing /oracle/OMI/sapdata4/omi640_13/omi640.data13
[880690.03] 07:29:47 /oracle/OMI/sapdata4/
[880690.03] 07:29:47 /oracle/OMI/sapdata4/omi640_13/
[843860.00] 07:31:03 /oracle/OMI/sapdata2/omi640_10/omi640.data10
[843860.00] 07:31:03 INF - Processing /oracle/OMI/sapdata2/omi640_9/omi640.data9
[843860.00] 07:31:03 /oracle/OMI/sapdata2/omi640_9/
[880690.03] 07:31:20 /oracle/OMI/sapdata4/omi640_13/omi640.data13
[880690.03] 07:31:20 INF - Processing /oracle/OMI/sapdata2/omi640_8/omi640.data8
[880690.03] 07:31:20 /oracle/OMI/sapdata2/
[880690.03] 07:31:20 /oracle/OMI/sapdata2/omi640_8/
[843860.00] 07:32:29 /oracle/OMI/sapdata2/omi640_9/omi640.data9
[843860.00] 07:32:29 INF - Processing /oracle/OMI/sapdata4/omi_13/omi.data13
[843860.00] 07:32:29 /oracle/OMI/sapdata4/
[843860.00] 07:32:29 /oracle/OMI/sapdata4/omi_13/
[880690.03] 07:32:44 /oracle/OMI/sapdata2/omi640_8/omi640.data8
[880690.03] 07:32:44 INF - Processing /oracle/OMI/sapdata4/omi640_15/omi640.data15
[880690.03] 07:32:44 /oracle/OMI/sapdata4/
[880690.03] 07:32:44 /oracle/OMI/sapdata4/omi640_15/
[843860.00] 07:33:04 /oracle/OMI/sapdata4/omi_13/omi.data13
[843860.00] 07:33:04 INF - Processing /oracle/OMI/sapdata1/system_1/system.data1
[843860.00] 07:33:04 /oracle/OMI/sapdata1/
[843860.00] 07:33:04 /oracle/OMI/sapdata1/system_1/
[843860.00] 07:33:23 /oracle/OMI/sapdata1/system_1/system.data1
[843860.00] 07:33:23 INF - Client completed sending data for backup
[843860.00]
[880690.03] 07:33:18 /oracle/OMI/sapdata4/omi640_15/omi640.data15
[880690.03] 07:33:18 INF - Processing /oracle/OMI/sapdata4/omi_14/omi.data14
[880690.03] 07:33:18 /oracle/OMI/sapdata4/omi_14/
[880690.03] 07:33:49 /oracle/OMI/sapdata4/omi_14/omi.data14
[880690.03] 07:33:49 INF - Processing /oracle/OMI/sapbackup/cntrlOMI.dbf
[880690.03] 07:33:49 /oracle/OMI/sapbackup/
[880690.03] 07:33:50 /oracle/OMI/sapbackup/cntrlOMI.dbf
[880690.03] 07:33:50 INF - Client completed sending data for backup
[880690.03]
[843860.00] 07:34:47 INF - Server status = 0
[880690.03] 07:34:57 INF - Server status = 0
[880690.03] 07:36:02 INF - Backup by oraomi on client ipcby104b1.apac.gdc using policy APAC_SAP_DC1, sched U_xx_1m: the requested operation was successfully completed.
[880690.03]
[843860.00] 07:36:07 INF - Backup by oraomi on client ipcby104b1.apac.gdc using policy APAC_SAP_DC1, sched U_xx_1m: the requested operation was successfully completed.
[843860.00]
ERROR: wait for process to complete
BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata4/omi640_12/omi640.data12
BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata2/omi640_7/omi640.data7
BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata3/omi_1/omi.data1
BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata3/omi_2/omi.data2
BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata3/omi_3/omi.data3
BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata3/omi_4/omi.data4
BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata1/system_2/system.data2
BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata4/omi_10/omi.data10
BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata4/omi_11/omi.data11
BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata4/omi_12/omi.data12
BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata2/omi640_6/omi640.data6
BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata1/system_3/system.data3
BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata4/omiusr_1/omiusr.data1
BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata4/omi_7/omi.data7
BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata4/omi_8/omi.data8
BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata4/omi640_14/omi640.data14
BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata1/omi640_1/omi640.data1
BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata1/omi640_2/omi640.data2
BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata1/omi640_5/omi640.data5
BR0233E Backup utility has reported an error while saving file /oracle/OMI/sapdata1/system_1/sysaux01.dbf
BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52
#FILE..... /oracle/OMI/sapdata1/system_1/system.data1
#SAVED.... NS1188352332
BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52
#FILE..... /oracle/OMI/sapdata2/omi640_10/omi640.data10
#SAVED.... NS1188352332
BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52
#FILE..... /oracle/OMI/sapdata4/omi_13/omi.data13
#SAVED.... NS1188352332
BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52
#FILE..... /oracle/OMI/sapdata2/omi640_9/omi640.data9
#SAVED.... NS1188352332
BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52
#FILE..... /oracle/OMI/sapdata1/undo_1/undo.data1
#SAVED.... NS1188352332
BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52
#FILE..... /oracle/OMI/sapdata1/omi640_4/omi640.data4
#SAVED.... NS1188352332
BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52
#FILE..... /oracle/OMI/sapdata2/omi640_8/omi640.data8
#SAVED.... NS1188352337
BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52
#FILE..... /oracle/OMI/sapdata4/omi_6/omi.data6
#SAVED.... NS1188352337
BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52
#FILE..... /oracle/OMI/sapdata4/omi_14/omi.data14
#SAVED.... NS1188352337
BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52
#FILE..... /oracle/OMI/sapdata4/omi_9/omi.data9
#SAVED.... NS1188352337
BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52
#FILE..... /oracle/OMI/sapbackup/cntrlOMI.dbf
#SAVED.... NS1188352337
BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52
#FILE..... /oracle/OMI/sapdata4/omi640_13/omi640.data13
#SAVED.... NS1188352337
BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52
#FILE..... /oracle/OMI/sapdata3/omi640_11/omi640.data11
#SAVED.... NS1188352337
BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52
#FILE..... /oracle/OMI/sapdata4/omi640_15/omi640.data15
#SAVED.... NS1188352337
BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52
#FILE..... /oracle/OMI/sapdata1/omi640_3/omi640.data3
#SAVED.... NS1188352337
BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52
#FILE..... /oracle/OMI/sapdata3/omi_5/omi.data5
#SAVED.... NS1188352337
BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52
BR0279E Return code from 'backint -u OMI -f backup -i /oracle/OMI/sapbackup/.bdwaniws.lst -t file -p /oracle/OMI/102_64/dbs/initOMI.utl -c': 2
BR0232E 16 of 36 files saved by backup utility
BR0280I BRBACKUP time stamp: 2007-08-29 07.36.52
BR0231E Backup utility call failed
BR0280I BRBACKUP time stamp: 2007-08-29 07.36.54
BR0317I 'Alter database end backup' successful
BR0056I End of database backup: bdwaniws.anf 2007-08-29 07.36.52
BR0280I BRBACKUP time stamp: 2007-08-29 07.36.55
BR0054I BRBACKUP terminated with errors
Thanks,
deepthiWhile surfing the net i got one solution
NetBackup patch S0820462 corrects this by ensuring file name uniqueness with a timestamp value included in the name. Obtain this patch by contacting VERITAS Technical Support. Once you have the patch, follow the instructions included in the file patchS0820462.README which accompanies the patch.
I got the idea but i dont understand where i will get the info regarding the files ??
and how this patch has to be installed in the system. -
The server gave an error during download: 500 Internal Server Error
Does this mean the servers are overloaded? I've installed Lion on two of my MACs. Can't get past the "The server gave an error during download: 500 Internal Server Error" message on my third system. Anyone?
It's NOT a problem with your computer - the Lion Server is being slammed with downloads and is at max capacity. (Per an Apple Rep)
You can either wait until later, or for those of you like me that don't want to wait, you can keep hitting Retry until it goes through. Just like calling a phone line that's busy - eventually you'll click Retry at the same time as someone else's download finishes and the download will start. (I only had to click Retry about 75 times ) -
Delete Command in Internal table
Hi Friends,
Currently i am using DELETE command in internal table. My main requirement is delete the records in internal table based on the select -options given in Selection screen.
Synatx is given below.
DELETE i_list WHERElifsk NOT in S_lifsk[].
It is working fine if we give positive values ie EQ 24 etc.
if we give negetive values if NE 23(in select options) here
sy-subrc is failing.
Can any one kindly suggest.
Regards,
DVNS.Hi DV
Its so simple... u r requirement is to delete all the entries which are not in the select options.
Ur sintax is working correct. Because, even if u hit a database table with select querry using this select option, it will fetch all the positive entries and excludes all negative entries....
if still u feel problem is persisting... then fetch the lifsk from db table using this select option into an internal table and then filter how ever u want.
Venkata Raju Duggirala -
Getting error of Defining an internal table with header line, SELECT-OPTIO
Hi all,
i have a coding for my smart form,In this coding i have define an structure which being used,but when i execute it it give me
error of Defining an internal table with header line, SELECT-OPTIONS, and RANGES is not allowed within a structure.Even tough you can see that in my coding im not using SELECT-OPTION or RANGES,but can't understand why it gives me this error.
Following are the code:
DATA: BEGIN OF traptab OCCURS 50.
INCLUDE STRUCTURE mseg.
DATA: vgart LIKE mkpf-vgart,
blart LIKE mkpf-blart,
blaum LIKE mkpf-blaum,
bldat LIKE mkpf-bldat,
budat LIKE mkpf-budat,
cpudt LIKE mkpf-cpudt,
cputm LIKE mkpf-cputm,
aedat LIKE mkpf-aedat,
usnam LIKE mkpf-usnam,
tcode LIKE mkpf-tcode,
xblnr LIKE mkpf-xblnr,
bktxt LIKE mkpf-bktxt,
frath LIKE mkpf-frath,
frbnr LIKE mkpf-frbnr,
wever LIKE mkpf-wever,
END OF traptab.
Thanks & Regards,
sappk25thanks
-
Error Message ( Error converting a selection internally )
Hello Experts ,
I have a question ...all the time i try to open a selection at planning book the following message appears
Error converting a selection internally
Message no. /SAPAPO/MCPSH_SEL029
Some one can help me with this issue PLEASE ....
Thanks
MauricioHi,
I have used the function module /SAPAPO/MCPSH_SELECTION_SAVE to create selection ids. Now for selection id which has a navigational attribute as a selection criteria, i am getting the below error when I select it in the planning book.
Error converting a selection internally
Message no. /SAPAPO/MCPSH_SEL029
When I do Display Selection on the selection id, I find the following
APO Planning Version 000
Depot ABC
PROD_ACTIVE X
This is strange as the 1st two infoobjects APO Planning Version and Depot are characteristics and are displayed by their description while the 3rd infoobject PROD_ACTIVE is a navigational attribute and that is displayed by its name.
When I goto Object selection, I find that the selection criteria has only APO Planning Version = 000 and Depot = ABC. The navigational attribute PROD_ACTIVE = X is missing.
Can anybody throw some insights into this issue?
Thanks in advance
Ehsan Ahmed -
An unexpected error during Command execution
Hi,
I am using Project Server 2007 SP 2 at the moment. One of our user keeps encountering this error "An unexpected error during Command execution" for a project file. We tried to restore the earlier version of the plan using Administrative restore.
But it only works as a temporary fix as the problem keeps reapprearing. Kindly help.Only SP2 for Project 2007? Probably not worth trying to debug, with 2007 it is almost essential to have SP3 and the very last cumulative update for Project pro and Server. 2007 was a very buggy version (they were forced to release at same time as Office
2007 and it was too soon).
Rod Gill
Author of the one and only Project VBA Book
www.project-systems.co.nz -
Find Next command doesn't work right in CS3?
The Find Next command (F3 in Windows) used to go immediately
to the next instance of a search term. What was great was that I
could search for a term on one page, close it, then open a
different page and immediately press F3. But now, the command keeps
bringing up a "Find and Replace" dialog (that has no Replace box,
which is also odd) instead of going immediately to the next
instance of the search term. This dialog already has the correct
search term in it, so it isn't like I'm trying to find an empty
string.
Is this a bug, or am I losing it?I am running OS X 10.8.2 (supplemental) and Preview v6.01.
I can search for a particular string in a PDF. It will highlight all occurrences in yellow. Then, whether from the Find menu > Find Next, or by using Command+G from within Preview, it will quickly step to the next occurrence of the Find target. Just tested this on my machine, and it works fine. Nothing special set to make this work.
Unaware of any setting to disable search as you type feature.
If there is a com.apple.Preview.plist file in your home directory/Library/Preferences, you might try dragging it to the Trash and emptying it. -
Hi
I've been trying to adapt and deploy an enterprise appliaction developped and deployed
before under JBoss.
My database is MySQL and I use Together Control Center for development and hot deployment.
After having modified a lot of things (the seamless protability seems always sor
far :), now I get some strange error when deploying from withing Together Control
Center 6.0:
WLS61:General error: select command denied to user: '[email protected]' for table
'finess'
Off course the user foo has all possible and imaginable rights.
Does anybody have an idea on how to get around it ?
Thanks
AlirezaFound the answer... email that went to junk mail. Hope this helps others!
Hello Subscription User,
Thanks for choosing ClearDB for your database needs. We appreciate your business and
your interest in our services. Our commitment to all of our customers is that we
provide a high quality of service on all of our database systems. Part of that
commitment includes the enforcement of database size quotas in order to ensure
the highest quality of service for our customers.
As such, we're sending you this automated message regarding one of your databases:
Database: wp____
Tier/Plan: Mercury
Tier size quota: 20 MB
This database has either reached or has exceeded its maximum allowed size for the
'Mercury' plan/tier that it currently belongs to. As such, our systems were forced to
place a read-only lock on it. We kindly encourage you to upgrade your database
to a larger tier/plan so that we can restore write privileges and enable complete
access to it from your account.
If you feel that you have received this notification in error, please feel free
to contact us by replying to this email along with information that you feel may
assist us in assessing the situation with your database.
Thanks again for choosing ClearDB,
The ClearDB Team
Maybe you are looking for
-
Can't download music - seems to be an iTunes Match problem
I have iTunes Match activated, which is working fine on my iPad and iPhone. However I cannot download purchased music onto the iMac. In my household there is a shared iMac and each user has a different login & password. Only I know my login passwo
-
This is my problem: I use JDom to parse remote XML document with DTD linked to it. But I get that error. Request is: SAXBuilder builder = new SAXBuilder(); Document doc = builder.build(new URL(url)); This works fine when I use these XML and DTD docs
-
I am unable to see bcc addresses in sent message
bcc addresses do not show in Mail sent messages. Recommended solutions from other posts have not solved the issue.
-
Access denied in SMDagentApplication.log file
Hi , I am seeing below errors in SMDagentApplication.log file com.sap.smd.wily.hostagent.action.SapOsColAction.launchDaemon(SapOsColAction.java:446) ... 15 more Nov 12, 2009 7:32:45 AM [Thread[SAP GC|QEM_J00_server0,5,main]] Error com.sap.s
-
HT6413 can i change the folder for icloud drive on my pc? from c: to d:?
when i use the icloud drive it puts the files on my c: drive, this is only an 64gb SSD, so i would like to change this to my D hard drive, is this possible ?