Error no 1013 while updating iphone 4 from 4.2.1 to 4.3.1
hi guys i recently purchased my new iphone 4 with 4.2.1 firmware...while updating to 4.3.1 firmware am getting error no 1013 i tried to delete the gs.apple.com data in hosts file also but no luck plz someone post me some successful answer to me
thank u
Khan121's method worked perfectly for me. I got the 1013 error every time when trying to upgrade my 4.2.1 to 4.3.1 on a Windows XP machine. I tried numerous different "fixes" and none worked. I created a new admin level user on my machine, logged in as that user and restored the iphone with no problems at all. I then switched back to my regular account and completed the restoring of my data back on the phone. After 3 hours of stress this one simple fix did it. Thank you very much Khan121.
Similar Messages
-
Error code "-1" while updating the iOS from IPAD2
When I try to update my IPAD2 to iOS 4.3.2 I receive the error code "-1" at the end of the installation, and now I´m stuck in the restore point, because the system don´t boot anymore. When I connect to Itunes it says I have to download the update, then the error appear again, and this is going over and over... Any hints here?
i dont 'now whay people of apple company not concern about this probleme .
i am facing the the same that you have . no one answer . please good felwo help us -
while updating iphone, itune gave me error of 1015 which tells that my iphone is much better than from which that i am updating. But now my iphone is still in restoring mode how i can resolve this problem.please tell me
I just had the same problem with my iphone, only thing i could do was completely restore factory settings, lost a bunch of pics and contacts in the process... hope you have better luck than me
-
While updating iphone software to 5.0.1, I am getting error that Iphone could not be updated because the firmware file not compatible.
Can anyone help me to resolve this issue.Using iTunes 10.5.2.11 on a PC running 64 bit Windows 7
First did a full back up of iphone using iTunes
Put iphone into Recovery Mode ( http://support.apple.com/kb/ht1808 ). Erases all user data and settings!
Disconnected USB cable from iphone
Powered off iphone by holding down Sleep/Off button until slider appeared, slid to off, waited until screen dark
Pressed and kept holding Home button while plugging cable back into phone
I still saw the graphic on the iphone that said to plug into iTunes, so I unplugged and re-plugged cable. (I may have released the Home button too soon)
Recovery Mode alert came up in iTunes.
Followed all iTunes prompts to restore phone - it downloaded and sucessfully installed iOS 5.0.1
iphone did not appear in iTunes due to missing pairing file (that made me nervous)
iphone was now at factory settings. I followed prompts on iphone screen to start reactivation process
Eventually the iphone asked if I wanted to restore from a back-up (whew!)
A window opened in iTunes and I was able to select my previous back-up file for the restore
A full restore from back-up then occured
I also allowed a carrier settings update to occur when prompted (not sure that happens in all cases)
When the restore was done I had to re-enter some passwords, but everything was there
iOS is now 5.0.1 (9A406). The whole process took about an hour. -
I am getting an 1015 error while updating Iphone 3G with latest iTunes pls help me to restore iPhone 3G
Try this and see if this helps http://support.apple.com/kb/TS3694#error1015
-
Itunes had an error and shutdown while updating my iphone 4. Itune tells me my phone is in recovery mode and I must use restore before im able to use itunes. I cannot do anything on my phone now. It shows icons telling me to connect to itunes. I want to know if I restore my phone do I lose any photos and that were not backed up yet? or What happens to my contacts and phone numbers?
Itunes had an error and shutdown while updating my iphone 4. Itune tells me my phone is in recovery mode and I must use restore before im able to use itunes. I cannot do anything on my phone now. It shows icons telling me to connect to itunes. I want to know if I restore my phone do I lose any photos and that were not backed up yet? or What happens to my contacts and phone numbers?
-
Error 1602 when updating Iphone 4 from 4.3 to 5.. Any help ?
Error 1602 when updating Iphone 4 from 4.3 to 5 and after that it goes into "recovery mode" but Its not recognized by Itunes, I can only exit it with Tinyumrella and nothing else.
It seems that the itunes program has some interfefence when contacting the apple server.
i had this problem gave me error message 3200, i turned off the anti virus after restarting the computer(windows vista) and restarting the phone.
Turned off the sidebar, and closed any programs in the notifications section such as nokia ovi etc which load up when the computer starts also skype.
ha presto it began the process of transfering the file to the iphone4 and has now fully updated
hope that helps
leon -
What cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?
what cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?
SSince Apple does not support downgrading the iOS I suggest you start a new question that gives a good title to a specific problem. Then in the body of the thread describe the problem in detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received.
-
An error has occurred while updating article layouts. The InDesign file for the layout cannot be...
When trying to complete the tutorial for indesign I get the following error when trying to add an article to my folio:
"An error has occurred while updating article layouts. The InDesign file for the layout cannot be found."
I am able to create the folio then I click into articles. My document "WiFi_v.indd" is open when clicking add article, but I keep getting this error message.
I am using the following versions of the software (Should be the latest).
- Folio Builder (Downloaded version Version 1.1.8.0)
reported version:
11.4.3.20111129_m672305 7.5.5.17
Adobe In Design 7.5.2 CS 5.5
Also tried reinstalling the plugins (uninstall + install)If you're on Mac OS with the OS in another language than english the "User" folder might contain a non english character and causing problems.
I e in Sweden the Mac OS user-folder is called "Användare". When attempting uploading articles from a file locaded anywere this "Användare" is in the file path the Folio producer says Error finding InDesign layout, due to -what i think is-the "ä" in Användare. If you still want to work local you can place the InDesign files directly into the Macintosh HD. In this case the User folder is not used.
BR
Henrik -
JAEHYLEE , Error FRM 40654 While Updating Few Supplier Sites 시 공백 제거 방법
PURPOSE
Error FRM 40654 While Updating Few Supplier Sites , 공백 제거 방법
Workaround
N/A
Solution Description
trailspace.sql:
CREATE OR REPLACE PROCEDURE CHK_TRAIL_SPACE (p_table_name in varchar)
IS
v_table_name varchar(30);
v_column_name varchar(30);
v_column_name_c char(30);
v_space_count number;
v_ret number; -- temp holder for above
v_initial_space_counter number;
dyn_cursor number;
CURSOR TABLE1 IS
SELECT table_name
FROM DBA_TABLES
WHERE table_name = p_table_name;
CURSOR COLUMN1 IS
SELECT column_name
FROM DBA_TAB_COLUMNS
WHERE table_name = v_table_name;
BEGIN
OPEN TABLE1;
LOOP
-- FOR crec1 in TABLE1 LOOP
fetch TABLE1 into v_table_name;
IF (TABLE1%NOTFOUND) THEN
exit;
END IF;
dbms_output.put_line(v_table_name);
dbms_output.put_line
v_initial_space_counter := 0;
OPEN COLUMN1;
LOOP
-- FOR crec2 in COLUMN1 LOOP
fetch COLUMN1 into v_column_name;
IF (COLUMN1%NOTFOUND) THEN
exit;
END IF;
dyn_cursor := DBMS_SQL.OPEN_CURSOR;
DBMS_SQL.PARSE
(dyn_cursor,
'SELECT COUNT(*) ' ||
'FROM ' || p_table_name ||
' WHERE ' || v_column_name || ' LIKE ''% ''',
DBMS_SQL.NATIVE);
DBMS_SQL.define_column (dyn_cursor, 1, v_space_count);
v_ret := DBMS_SQL.EXECUTE(dyn_cursor);
if DBMS_SQL.fetch_rows(dyn_cursor) > 0 then
DBMS_SQL.column_value (dyn_cursor, 1, v_space_count);
end if;
DBMS_SQL.CLOSE_CURSOR(dyn_cursor);
IF v_space_count > 0 THEN
v_initial_space_counter := v_initial_space_counter + 1;
END IF;
v_column_name_c := v_column_name;
IF v_space_count > 0 THEN
dbms_output.put_line(' ' || v_column_name_c || to_char(v_space_count));
END IF;
end loop;
close column1;
end loop;
close table1;
END CHK_TRAIL_SPACE;
cause: Trailing Spaces.
fix:
Please run trailspace.sql.
This creates a procedure that will check all VARCHAR2 columns
in a specified table for trailing spaces .
Run the file in SQL*PLUS .
It will return 'Procedure Created'
Then run it using the following:
set serveroutput on
execute chk_trail_space(<table_name to check>);
i.e. (execute chk_trail_space('PO_VENDORS');)
Please can you run this on the following two tables:
PO_VENDORS and PO_VENDOR_SITES_ALL.
Then if there are any trailing spaces as per output,
Then run the following command in TEST:
update <tablename>
set <column_name> = rtrim(<column_name>);
i.e.
update po_vendors
set vendor_name = rtrim(vendor_name);
Reference Documents
234048.1 -
Error code 0x80240031 while updating to 8.1
From last 20 days I am facing this error code 0x80240031 while updating to 8.1 sharp at 50% ...tried almost 50-60times on my ... G500s ... pre-installed os .... I contacted both Microsoft and Lenovo for this issue ... both of them tried to solve it ... Microsoft suggested me to reinstall the whole os. So I contacted Lenovo for the same ...they reinstalled it ... BUT STILL THE PROBLEM EXISTS.... I don’t know what to do m very frustrated ... should I sue Microsoft for not solving or Lenovo..... Because if this issue won’t get solve... I might have to take some legal source to solve my case ...I tired every option available on the web .....as i cant even get an new windows key or DVD...
I tried everything on that link... but still facing the error...
command prompt and type/run: "sfc /scannow" ...no problem
Dism /Online /Cleanup-Image /RestoreHealth.... no problem
Antivirus ..uninstalled .....
i tired the every possible thing on this webiste also
1. http://answers.microsoft.com/en-us/windows/forum/windows8_1-windows_install/windows-81-update-error-...
2. http://www.thewindowsclub.com/error-code-0x80240031-updating-to-windows-8-1 -
HT201210 I am trying to update iphone 4 from ISO 5.1.1 to ISO 6.0.1
I am trying to update iphone 4 from iSO 5.1.1 to iSO 6.0.1. The phone says it needs a software update, but when it's almost finished downloading it says Update failed. I am connected to Wi-Fi. Any suggestions?
Are you updating over the air or using iTunes on your computer? If you're doing it over the air, use iTunes instead. It's a little more reliable as far as the download goes.
If you're doing it via iTunes, disable your antivirus and firewall software. It can interfere with the update. -
Does anybody know the error code 11 while updating to ios 4.3.3.? thx
does anybody know the error code 11 while updating to ios 4.3.3. on an ipad1? thx
but my hard drive is still lot of spaces...still keep on trying to update...
-
HT1688 the network connection timed out while updating iphone software
the network connection timed out while updating iphone software and cannot continue.
Might want to search the Mac forum or post there... also, this thread is over 2 years old.
-
Extraction time while updating the data from update rule
Hello Friends,
Can you please tell me that why it is taking more time while updating the data from update rule to data target.
I believe that it is taking 40% of total extraction time.
Is there any specific reason for it?
Prompt reply will be appreciated.
Regards,hi,
check if you have complex transformation in that update rules, like calculation, read from other tables, etc.
take a look 'bw loading performance and analysis' doc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1955ba90-0201-0010-d3aa-8b2a4ef6bbb2
and bi performance tuning knowledge center
Business Intelligence Performance Tuning [original link is broken]
there e-learning for bw performance
hope this helps.
Maybe you are looking for
-
How to put data into a RFC import parameter structure from portal
Hi, All, I have a RFC in which an import parameter is a structure (not a table). I want to put data into that structure. I know how to put data into a table or a string. I tried to use IRecordSet MyTABStr = (IRecordSet)structureFactory.getStructure(f
-
How come I can't connect my Mac Book pro to my tv? it use to work but now it wont. how do I fix this?
-
Hello everyone, I've checked the many questions and posts on KVM switches, but none seem to address my variables, so I'm hoping someone can provide some recommendations, or confirm that I can't do what I'd like to do. I have two primary macs, and a c
-
Can we Run the report in background in BI
Dear all, we have a report which is taking more time to run nearly 15 min...... And when we execute then the time out error is coming. can we create a backround job for this report. Regards venu
-
This is the crappiest website I've ever had the misfortune of having to deal with.
I shouldn't even bother posting my question because I've lost all hope that I'll get an answer. But here goes anyway: My verizon voicemail gives me a stuttered dial tone even when there are no new messages. How do I reset it?