Error: No %%BoundingBox: comment in header!

When we attempt to print a jpg or psd file we get the following error: error: No %%BoundingBox: comment in header!
Am in a computer lab setting using intel iMac, OS 10.5.4, CS3 Photoshop along with an HP5200tn NETWORKED laser printer. All updates have been loaded as they became available so all is up to date.
No printing problems other than in Photoshop.
Called Adobe and they say it is not their problem/fault. Called HP and they blamed adobe. Meantime, I DID get prints by clicking on the old "open using rosetta" in Photoshop but wonder what new problem THAT solution will cause. Plus, I resent having to use rosetta with nice new macs with up-to-date software and drivers. We do not have any gimp drivers installed nor any sketchy software.
Can anyone offer any viable suggestion. Thank you in advance.

Long story short. This " No %%BoundingBox: comment in header! " problem showed up on my Brother MFC-8640D. After hours of troubleshooting, I found the problem. As indicated in this thread it is a Postscript issue. Somehow, Mac OSX switched from a the "CUPS" version of the driver in OSX to the Postscript version, thus communicating with Photoshop that it is a Postscript printer, which it's not, so Photoshop ends up printing code instead of the print.
Solution: Follow these instructions. Should be the same even if your printer is not a Brother.
First, uninstall the printer driver:
http://welcome.solutions.brother.com/BSC/public/us/usot/en/faq/faq/000000/000300/000014/faq000314_003.html?reg=us&c=us_ot&lang=en&pro d=mfc8640dus&Cat=
Second, reinstall the printer driver:
http://pub.brother.com/pub/com/pdf/macosx/mac105driver_ipd.pdf
Follow the instructions and make sure you install the "CUPS" driver, not the "Postscript" one.
Restart and all your prints should now print normal. I get the same override warning on postscript that one gets using a photo inkjet because now the OS knows your printer is not a postscript model. I can't believe Adobe and others didn't just come up with the solution. Crap, it took me hours of investigation and trying all these work-a-rounds (some worked, but added additional steps and greatly increased the load and print time, sometimes by 500% or more....too slow).
How the driver is OSX changed over from CUPS to Postscript, I'm not sure, but a while back I reinstalled the scanner driver and may have done something? Anyways, this solves the real problem. No need for all the other time consuming work-a-rounds.
Good Luck

Similar Messages

No %%BoundingBox: comment in header!

I get this message in my printer queue when printing from PS CS3 on a new MacPro running 10.5.7. This happens when printing either to an Epson 4000 run by Colorburst or to my little HP Laser.
I've searched the forum already and found some discussion of this problem, but no definitive solution.
I've upgraded from 10.5.6 to 10.5.7, tried printing various file formats, reinstalled printer drivers etc. with no luck.
Any insight appreciated.
Leo

Long story short. This " No %%BoundingBox: comment in header! " problem showed up on my Brother MFC-8640D. After hours of troubleshooting, I found the problem. As indicated in this thread it is a Postscript issue. Somehow, Mac OSX switched from a the "CUPS" version of the driver in OSX to the Postscript version, thus communicating with Photoshop that it is a Postscript printer, which it's not, so Photoshop ends up printing code instead of the print.
Solution: Follow these instructions. Should be the same even if your printer is not a Brother.
First, uninstall the printer driver:
http://welcome.solutions.brother.com/BSC/public/us/usot/en/faq/faq/000000/000300/000014/faq000314_003.html?reg=us&c=us_ot&lang=en&pro d=mfc8640dus&Cat=
Second, reinstall the printer driver:
http://pub.brother.com/pub/com/pdf/macosx/mac105driver_ipd.pdf
Follow the instructions and make sure you install the "CUPS" driver, not the "Postscript" one.
Restart and all your prints should now print normal. I get the same override warning on postscript that one gets using a photo inkjet because now the OS knows your printer is not a postscript model. I can't believe Adobe and others didn't just come up with the solution. Crap, it took me hours of investigation and trying all these work-a-rounds (some worked, but added additional steps and greatly increased the load and print time, sometimes by 500% or more....too slow).
How the driver is OSX changed over from CUPS to Postscript, I'm not sure, but a while back I reinstalled the scanner driver and may have done something? Anyways, this solves the real problem. No need for all the other time consuming work-a-rounds.
Good Luck

No %%Bounding Box: Comment in header!

Hi,
Since I recently upgraded to 10.4.9 I am encountering problems with printing. Some seemed to be related to outdated printer drivers and things then worked well for some time. However, since two days ago, I am always getting an error message when printing to an HP LJ 1200:
"No %%Bounding Box: Comment in header!"
The printer has been installed via HP JetDirect/IP-Printer. I am getting the same error message when printing from any application; Word, Adobe, Camino, etc, and when printing the preview. Documents are not sophisticated, just plain text and figures.
I reinstalled the printer, with no avail. If the printer creates some output, it takes a very long time and the printout then consists of three to four lines of numbers and letters.
I do not have problems (yet?) when printing to a Lexmark C510; everything works fine. So, printing is not completely disabled, fortunately.
It seems that others have encountered the same problem, and there was a similar thread (unsolved though) in the Tiger discussion group. I really would be grateful if somebody could provide me with a tip how to solve this problem.
Second, in the System Settings - Sharing, I can not disable Printer Sharing. Clicking in the box or the Stop button has no effect. The same is true for Print&Fax; I can uncheck the first box (share printer with other computers), but when I reopen, the box is checked again.
Any helpful hints will be appreciated!
Jens
iMac G4, 1.25 MHz, 768 MB Mac OS X (10.4.9)

Exactly the same problem and error message w/ my HP LJ 1015(network printing from Mac to WinXP).
greg: how to re-update the combo update? I have downloaded the standalone comobo update from Apple website, do I need to go back to 10.4.8(if so how?) then install the combo update or it'll be fine just install the downloaded update on the current 10.4.9 system? Thank you.

"Submission status" error while posting comments using evcom

Hi friends,
I am getting "Submission status" error while posting comments using evcom. This error comes up even when we use "post comments" option in Action Pane.
The error text goes like this :
Error Message -
This cell can not be updated. Submission status must be modified to allow changes.
010_000|2009.TOTAL|INTERCO|NOPC
How can we get rid of this error?

That's means the status for that specific category, time entity is approved and you can not do any changes including
comments chnages.
You have to change first the work status for that entity and after that you will be able to submit your comments.
Regards
Sorin radulescu

Mail-Adapter Integration Engine Error during parsing of SOAP header

Hello,
we use XI with the mail adapter. Most of the messages are processed correctly. But sometimes I get following errors in the J2EE-logviewer:
Transmitting the message to endpoint http://<xi-host>:<http-port>/sap/xi/engine
?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.a
pi.RecoverableException: Received HTTP response code 500 : Error during
parsing of SOAP header.
Failed to transmit message 4e913640-4cc5-11dc-8560-00e000c55366(OUTBOUND)
due to com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP
response code 500 : Error during parsing of SOAP header.
Retries exceded, set message
4e913640-4cc5-11dc-8560-00e000c55366(OUTBOUND) to status NON_DELIVERED.
Has somebody else the same problem and solved it or any idea what the matter could be?
Thanks for your help
Christian

Hi Reddy,
We´ve got the following scenario:
Exchange-Server (is always up)
XI Mail-ReceiverAdapter
I use IMAP4 to access the Outlook-Email-Box
Everything works fine. But some Emails aren´t processed.
I think it´s a problem between adapterframework and the integration engine?
There is no difference between the emails?
If you´ll need further informations ask me?
Thanks

Error during parsing of SOAP header

Hi all,
I have configured the j-meter to send an http request to inegration engine of PI.
The request xml that I am sending is as follows:
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Header>
<SOAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30"
versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1">
</SOAP:Main>
</SOAP:Header>
<SOAP:Body>
<ns1:UnitOfMeasure xmlns:ns1="urn:sapappl:mdm:cp:eame:masterdata:uom:620">
<Record>
<FinishedMaterialCode>000000000000000233</FinishedMaterialCode>
<BaseUOM>KG</BaseUOM>
<AlternateUOM>GEB</AlternateUOM>
<UnitsInAlternateUOM>100</UnitsInAlternateUOM>
<UnitsInBaseUOM>2268</UnitsInBaseUOM>
<Active_Deleted></Active_Deleted>
</Record>
</ns1:UnitOfMeasure>
</SOAP:Body>
</SOAP:Envelope>
I am getting the following response from the XI:
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Header>
</SOAP:Header>
<SOAP:Body>
<SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"><faultcode>SOAP:Client</faultcode><faultstring>Error during parsing of SOAP header</faultstring><faultactor>http://sap.com/xi/XI/Message/30</faultactor><detail><SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIProtocol</SAP:Category><SAP:Code area="PARSER"/><SAP:P1/><SAP:P2/><SAP:P3/><SAP:P4/><SAP:AdditionalText/><SAP:ApplicationFaultMessage namespace=""/><SAP:Stack>System error in parser
</SAP:Stack></SAP:Error></detail></SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
Any idea as to why PI is not able to parse the request header?
Thanks,
Amit

Hi,
Better to take WSDL from PI(ID window) and try.

REUSE_ALV_HIERSEQ_LIST_DISPLAY - comment per header entry

Hi ABAP Gurus,
Good day.
I'm using REUSE_ALV_HIERSEQ_LIST_DISPLAY to display header and item data. I would like to ask how to add comments above per header entry. I would be adding customer details in the comments per header. If possible, can you please provide a sample code? Thank you.
Best regards,
Brando

Hi
I think you can only to use the TOP-OF-PAGE event, but that mean your alv print will be broken at every new header, i.e. every new header will be printed in a new page
Max

HTTP response code 500 : Error during parsing of SOAP header

Hi Experts,
I have a MAIL to IDOC scenario. An external third party emails invoices to our inbox - which we pick up and process the attachment. All is well when I test the scenario internally, but when the third party emails it fails with (see ERROR MESSAGE below).
When I look at the SOAP header of the failed message I see the values from the dump in this field:
<sap:Record namespace="http://sap.com/xi/XI/System/Mail" name="SHeaderTHREAD-INDEX">AcarCeJmJKHuV6wZSxm2UMoUeAjS1gALPExABtze/PACiUJDcAGS0DCwAmOOELAJlOzP0AFiOo8gCK1pEZAF500SsAYW46lgBgX2bGALyieMQAXw2oKgBYXf0WAGeueD0AAAHnhwBamTSaAGIUE0kAYZSYTQBgY5OTADunN0gAE3t/sQAWScBXADTQvvEAD4yNhQATdkKiAFr7DBMAGIXTZQAP2xJFABZ0YfoAGHYAuAAKlaeaACJ9xtUAEjcvQAAV4L06ABZuwsAAK/f9vgAAF/GSAAAYmRYARIKwtQAV5R9SABMo5bsAGQQyvAAVqsjyABOh9uMAFXTa2QAWEjsfABaEvp4AFaL1NQAV5MnUABXiVbIAGc7LsQAYVN9SABLfYQIAEwF3nQAWSL2lABn5ZgIAEf/k8gAWeVgrAAJaSZIAAElM4gATZR0GA=</sap:Record>
Can anyone tell me what SHeaderTHREAD-INDEX does? Or what my problem is (Our email is Outlook)
ERROR MESSAGE.........
SOAPFault received from Integration Server. ErrorCode/Category: XIProtocol/WRONG_VALUE; Params: SOAP:Envelope(1)SOAP:Header(1)sap:DynamicConfiguration(3)sap:Record(14), AcarCeJmJKHuV6wZSxm2UMoUeAjS1gALPExABtze/PACiUJDcAGS0DCwAmOOELAJlOzP0AFiOo8gCK1pEZAF500SsAYW46lgBgX2bGALyieMQAXw2oKgBYXf0WAGeueD0AAAHnhwBamTSaAGIUE0kAYZSYTQBgY5OTADunN0gAE3t/sQAWScBXADTQvvEAD4yNhQATdkKiAFr7DBMAGIXTZQAP2xJFABZ0YfoAGHYAuAAKlaeaACJ9xtUAEjcvQAAV4L06ABZuwsAAK/f9vgAAF/GSAAAYmRYARIKwtQAV5R9SABMo5bsAGQQyvAAVqsjyABOh9uMAFXTa2QAWEjsfABaEvp4AFaL1NQAV5MnUABXiVbIAGc7LsQAYVN9SABLfYQIAEwF3nQAWSL2lABn5ZgIAEf/k8gAWeVgrAAJaSZIAAElM4gATZR0GA=協彎䅍䔾ਉ़䥎噏䥃䕟乏㸸㌱ㄵㄹ㰯䥎噏䥃䕟乏㸊उ㱁䵏啎呟䕘䍌彖䅔㸷⸵〼⽁䵏啎呟䕘䍌彖䅔㸊उ㱃啒剅乃失㹅啒㰯䍕剒䕎䍙ㄾਉ़䅍何乔彖䅔㸱⸴㜼⽁ꯃ䅢坡汫, ST: ST_XM; AdditionalText: An error occurred when deserializing in the simple transformation program ST_XMS_MSGHDR30_DYNAMIC; ApplicationFaultMessage: ; ErrorStack: XML tag SOAP:Envelope(1)SOAP:Header(1)sap:DynamicConfiguration(3)sap:Record(14) (or one of the attributes) has the incorrect value AcarCeJmJKHuV6wZSxm2UMoUeAjS1gALPExABtze/PACiUJDcAGS0DCwAmOOELAJlOzP0AFiOo8gCK1pEZAF500SsAYW46lgBgX2bGALyieMQAXw2oKgBYXf0WAGeueD0AAAHnhwBamTSaAGIUE0kAYZSYTQBgY5OTADunN0gAE3t/sQAWScBXADTQvvEAD4yNhQATdkKiAFr7DBMAGIXTZQAP2xJFABZ0YfoAGHYAuAAKlaeaACJ9xtUAEjcvQ An error occurred when deserializing in the simple transformation program ST_XMS_MSGHDR30_DYNAMIC Data loss occurred when converting AcarCeJmJKHuV6wZSxm2UMoUeAjS1gALPExABtze/PACiUJDcAGS0DCwAmOOELAJlOzP0AFiOo8gCK1p
Transmitting the message to endpoint http://sdcxp1-ci.na.fmo.com:8000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 500 : Error during parsing of SOAP header.

We work with Microsoft Outlook, but I'm sure this could work with any email system.
This error only came from external emails - what we did in the end is to get the third party to email a particular email (email1) in our company. This is set up as a regular email account. On this email put a forward rule to email2 for a particular sender/subject. email2 is set up as POP3 so that XD1 can poll it - we also block any emails except from email1.
Doing this accomplishes a couple of things:
1) We get around the error because XI polls email2 (which has adapter settings of IMAP4 so we can see MAIL adapter attributes ie. sender, subject etc...When we originally had as POP3 we were not able to see these - but setting as IMAP4 causes the error for external emailers)
2) We have a SPAM filter - the XI email is clean from SPAM and the adapter will not have errors, as it only receives valid emails to process
3) We have a central email (email1) which is used to archive all XI emails - we use this for all email scenarios (as we also save to folder and forward in the rule)
Hope this helps your situation.

EDI validation Error: Segment GS(Functional Group Header) at guideline

Hi,
I am working on EDI 272 transaction(inbound).
I created ECS file for EDI 272 and validated the EDI 272 data with ECS file in the B2B document editor. Validation was sucess in the B2B document editor
when I upload the same ECS file and tested the same in B2B. I am using EDI version 4020.
I am getting the following error,
Segment GS(Functional Group Header) at guideline position 0200 is missing. This segment's standard option is Mandatory.{br}{br}This segment was expected after:{br}{tab}Segment Count: 1{br}{tab}Character: 105

Hi Anuj,
I created new ECS file without Envelope.
Now I am getting the following exception
<errorCode>AIP-51505</errorCode>
<errorText>5020: An invalid character was encountered in a data element.</errorText>
<errorDescription>
<![CDATA[Machine Info: (dgia21a.cccis.com)
Element ISA11 data type must be 'Alphanumeric'. Segment ISA is defined in the guideline at position 010.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Position: 11 {br}{tab}Characters: 82 through 83 ]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
<errorDetails>
<parameter name="InterchangeControlStandard_RepeatingSeparator" value=""/>
<parameter name="InterchangeTrailerControlNumber" value="000000001"/>
<parameter name="InterchangeChildCount" value="1"/>
<parameter name="InterchangeTime" value="1417"/>
<parameter name="InterchangeUsageIndicator" value="T"/>
<parameter name="ErrorScope" value="Interchange"/>
<parameter name="SubelementDelimiter" value=""/>
<parameter name="RepeatingSeparator" value=""/>
<parameter name="InterchangeSecurityInfo" value=" "/>
<parameter name="InterchangeReceiverQual" value="ZZ"/>
<parameter name="DecimalSeparator" value=""/>
<parameter name="InterchangeAuthorizationInfoQual" value="00"/>
<parameter name="ElementDelimiter" value=""/>
<parameter name="InterchangeComponentElementSep" value=""/>
<parameter name="InterchangeControlVersion" value="00402"/>
<parameter name="InterchangeAckRequested" value="0"/>
<parameter name="InterchangeSenderQual" value="ZZ"/>
<parameter name="InterchangeReceiverID" value="BBBBBBBBBBBB"/>
<parameter name="ReleaseCharacter" value=""/>
<parameter name="InterchangeDate" value="001212"/>
<parameter name="SegmentDelimiter" value=""/>
<parameter name="InterchangeControlNumber" value="000000001"/>
<parameter name="InterchangeAuthorizationInfo" value=" "/>
<parameter name="InterchangeSenderID" value="AAAAAAAAAAAA"/>
<parameter name="InterchangeSecurityInfoQual" value="00"/>
</errorDetails>
</Exception>

ORA-907 ERROR WHEN IMPORT (COMMENT 처리)

제품 : ORACLE SERVER
작성날짜 : 1997-10-15
ORA-907 ERROR WHEN IMPORT (COMMENT 처리)
========================================
ORA-907: missing right parenthesis error
이 error 는 export 한 table 을 create 시 comment 를 사용한 경우 발생하는 ORACLE error 이다.
이는 version 8.0.4 에서 fix 되었다.
이를 해결하기 위해서는 미리 table create script 를 돌려 temp_table 을
create 하십시오.
이 때 comment 를 모두 뺀 상태로 create 한다. 또는 /* */ 는 괜찮다.
이후 INSERT INTO temp_table select * from original_table ;
을 실행합니다.
즉 original_table 을 temp_table 로 copy 한 후
drop table original_table;
rename temp_table to original_table ;
을 한 후 table을 다시 export해서 다른 machine으로 import한다.
또 이 -- 를 없애는 방법으로 아래의 C program을 이용할 수 있다.
/* file name : cnvt_dmp.c
* This program is to covert double dash remark expression
* C language stype remark expression.
#include <stdio.h>
#define MAXWORDS 4
char s_reserve[4][100]={ "NOT NULL", "CONSTRAINTS",")",","};
int dash2remark();
void main(argc,argv)
int argc;
char *argv[];
FILE f_in, f_out;
int i,j,lreserve;
int chr1,chr2;
char str1[100],str2[100],str3[100];
if( argc != 3 ) {
printf(" usage : cnvt_dmp infile.dmp outfile.dmp \n");
exit(0);
if( (f_in = fopen(argv[1],"r")) == NULL ) {
printf("could't open the source file.: %s\n",argv[1]);
exit(0);
if( (f_out = fopen(argv[2],"w")) == NULL ) {
printf("대상화일을 생성할 수가 없습니다.\n");
exit(0);
j = i = 0;
while( (chr1 = fgetc(f_in)) != EOF && !ferror(f_in)) {
if( chr1 == 'D' ) {
str1[0]='D';
fputc(chr1, f_out) ;
for(i=1;i<7;i++) {
chr1 = fgetc(f_in);
str1[i] = chr1;
fputc(chr1, f_out) ;
str1[7] = 0;
strcpy( str2,"DEFAULT");
if ( strcmp( "DEFAULT",str1) == 0 ) {
lreserve = 0;
i =0;
while( (chr2 = fgetc(f_in))!= ','){
if ( chr2 == ')') break;
str2[i] = chr2;
if ( chr2 == '-' )
lreserve = 1;
i++;
str2[i] = chr2;
str2[i+1] = 0;
printf(" lreserv => %d, str2=>%s\n",lreserve,str2);
if (lreserve) {
dash2remark(f_in,f_out,str2);
else {
for( i=0;i<strlen(str2);i++) fputc(str2,f_out);
else {
fputc(chr1, f_out );
fclose(f_out);
fclose(f_in);
return;
int dash2remark( f_in,f_out,str)
FILE f_in,f_out;
char *str;
int i,j,start_pos=-1,end_pos=-1;
for( i=0; i < strlen(str); i++ ) {
if ( str[i] == '-') {
start_pos = i;
for( j =0 ; j < MAXWORDS; j++){
if (strncmp(s_reserve[j],str+i,strlen(s_reserve[j]))== 0){
end_pos = i;
if ( start_pos > 0 ) {
for(i=0;i< (start_pos-1); i++)
fputc( str[i],f_out);
fputc('/',f_out); fputc('*',f_out);
for(i =i+2;i<(end_pos-1);i++)
fputc(str[i],f_out);
fputc('*',f_out); fputc('/',f_out);fputc(' ',f_out);
for(i;i<strlen(str);i++)
fputc(str[i],f_out);
else {
for(i=0;i<strlen(str);i++)
fputc(str[i],f_out);
return(1);
이상입니다.

Hi, i think that the problem is around the rollback segments.The solution is bring other rollback segments ONLINE state, if not exist others rollbackup,then you need create the other rollback segments and bring online state.
If you need more information, you will must see the next DOC-ID on Metalink site,
Note:121971.1
Luck.
Have a good day.
Regards.

Error loading archive: no valid header or TOC found (80040002)

Dear Gurus,
I had recorded a tutorial which is am attempting to edit now.
On opening the tutorial through the editor, I get the following message:
"The following error occured while opening the file:
error loading archive: no valid header or TOC found (80040002)"
I am able to edit other tutorials satisfactorily.
I seek guidance in resolving the error and opening the tutorial.
Regards,
Ajay

Hi Ajay,
Do you have a solution for this issue?
Regards,
Leela.

[SOLVED] Error during update of LUKS header on device ./file

dd if=/dev/zero of=./file bs=1M count=200
cryptsetup luksFormat -s 512 -c aes-xts-plain64 -h sha512 ./file
WARNING!
========
This will overwrite data on ./file irrevocably.
Are you sure? (Type uppercase yes): YES
Enter LUKS passphrase:
Verify passphrase:
Error during update of LUKS header on device ./file.
This only happens on my 1TB HDD (GPT, xfs filesystem). I have 2 SSDs that do not throw the error.
I tested using a flash drive formatted as GPT and using xfs filesystem and it worked.
Ideas?
Last edited by not_sure (2013-03-01 02:50:32)

Hmm... I didn't know you could do that. Are you sure it can? https://wiki.archlinux.org/index.php/Di … ison_table
I thought dm-crypt basically did block level encryption.
I guess this is a "virtual partition"? Maybe https://www.linux.com/community/blogs/1 … nux/280174 helps? It seems to mount it as loopback prior to encryption?
Last edited by cfr (2013-03-01 01:07:16)

Commented Page Header Extension?

I'm looking for an extension that creates a new panel group
in Dreamweaver w/text boxes for inserting a Commented page header
containing Author, File Name, File Create Date, Version, and file
update notes. Does anyne know where I can find it? I've been
digging with no luck.
Thanks

Hi Osman
Try and see if increasing the size of the "Title" boilerplate solves your problem.
Regards
Sripathy

[svn] 2537: Fix two HTML errors in ASDoc comments

Revision: 2537
Author: [email protected]
Date: 2008-07-21 07:59:01 -0700 (Mon, 21 Jul 2008)
Log Message:
Fix two HTML errors in ASDoc comments
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/sandbox/IChildAccess.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/sandbox/ISandboxBridgeAccess.as

Welcome back everyone.
Hope you all had good holidays.
Cheers
glenn
tinylion development & design

Error says: Warning: Cannot modify header information

I keep receiving an error message after my form is sent (the form still send the information I need just wont re-direct to the next page)
It redirects to a page that says:
Warning: Cannot modify header information - headers already sent by (output started at /home/tommyle/public_html/newp.php:10) in /home/tommyle/public_html/newp.php on line 41
my php code looks like this:
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>Tommy Lemonade Beta</title>
<link href="style1.css" rel="stylesheet" type="text/css">
</head>
<body>
<?php
/* Set e-mail recipient */
$myemail = "profiles@tommylemonade";
/* Check all form inputs using check_input function */
$name = check_input($_POST['name'], "Enter your name");
$subject = check_input($_POST['subject'], "Enter a subject");
$email = check_input($_POST['email']);
$message = check_input($_POST['message'], "Write your message");
/* If e-mail is not valid show error message */
if (!preg_match("/([\w\-]+\@[\w\-]+\.[\w\-]+)/", $email))
show_error("E-mail address not valid");
/* Let's prepare the message for the e-mail */
$message = "
Name: $name
E-mail: $email
Subject: $subject
Message:
$message
/* Send the message using mail() function */
mail($myemail, $subject, $message);
/* Redirect visitor to the thank you page */
header('Location: thanks.html');
exit();
/* Functions we used */
function check_input($data, $problem='')
$data = trim($data);
$data = stripslashes($data);
$data = htmlspecialchars($data);
if ($problem && strlen($data) == 0)
show_error($problem);
return $data;
function show_error($myError)
?>
<html>
<body>
Please correct the following error:
<?php echo $myError; ?>
Hit the back button and try again
</body>
</html>
<?php
exit();
?>
</body>
</html>
This is line 41:
header('Location: thanks.html');
Can anybody see what I'm missing?

Yeah, rework the code so you don't get any output before the php code is executed (like below):
<?php
/* Set e-mail recipient */
$myemail = "profiles@tommylemonade";
/* Check all form inputs using check_input function */
$name = check_input($_POST['name'], "Enter your name");
$subject = check_input($_POST['subject'], "Enter a subject");
$email = check_input($_POST['email']);
$message = check_input($_POST['message'], "Write your message");
/* If e-mail is not valid show error message */
if (!preg_match("/([\w\-]+\@[\w\-]+\.[\w\-]+)/", $email))
show_error("E-mail address not valid");
/* Let's prepare the message for the e-mail */
$message = "
Name: $name
E-mail: $email
Subject: $subject
Message: $message
/* Send the message using mail() function */
mail($myemail, $subject, $message);
/* Redirect visitor to the thank you page */
header('Location: thanks.html');
exit();
/* Functions we used */
function check_input($data, $problem='')
$data = trim($data);
$data = stripslashes($data);
$data = htmlspecialchars($data);
if ($problem && strlen($data) == 0)
show_error($problem);
return $data;
function show_error($myError)
?>
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>Tommy Lemonade Beta</title>
<link href="style1.css" rel="stylesheet" type="text/css">
</head>
<body>
Please correct the following error:
<?php echo $myError; ?>
Hit the back button and try again
</body>
</html>
<?php
exit();
?>

Error: No %%BoundingBox: comment in header!

Similar Messages

Maybe you are looking for