Error: No data for binding key while generating WSDL

Hello users,
I have converted a custom rfc to webservice using Wizard tool. While generating WSDL file using Open WSDL document for selected binding of SOAMANAGER, i'm getting the error message 'No Data for Binding Key'.
Can anyone let me know the solution to resolve this issue? Also, I could note that the Object Status for this sevice reads Services: 0 / Endpoints: 0
Strangely, I tried to generate WSDL for another Custom Webservice and it did get generated but with 403 error page. and for this the Object Status read Services: 1 / Endpoints: 1.
Any information with respect to this is appreciated.
Thanks in advance.
Regards,
Naresh

Hi Naresh,
You have posted the question in the wrong forum, it should have been posted in Webdynpro.
Cheers,
Bhavana

Similar Messages

  • Error: 1013020 Cannot clear data for database [Daily] while other users are

    I'm trying to clear a (BSO, v 11.1.2.1) database, and it's failing with the following message:
    Error: 1013020 Cannot clear data for database [Daily] while other users are connected.
    There are no other users connected first of all. Second of all, I've never had a database fail to clear just because other users were connected. Has anyone seen this before?
    Sabrina

    WHen ever u start essbase application ..there is services starts in task manager called "ESSSvr" . The number get increased when keep opening as number of application you open ..So what i say is when u see no users in sesssion and no batch runs ahead , u can stop the Application in EAS and automatically it will log off all the users from that respective application ..And then start again the application and u can perform ur task
    this usually happnes when some one is connected with excel addin or Same EAS open by another user remotely..thats what i have seen in my exp's

  • Error while Generating WSDL File from SAP WSDLGenerator

    See the end of this message for details on invoking
    just-in-time (JIT) debugging instead of this dialog box.
    Exception Text **************
    System.NullReferenceException: Object reference not set to an instance of an object.
       at WebServiceDescription.SelectOperation.ShowUDOsList(String sessionID)
       at WebServiceDescription.SelectOperation..ctor(String sessionID)
       at WebServiceDescription.WsdlServicesGenerator.ShowOptions()
       at WebServiceDescription.Form1.btCreateWsdl_Click(Object sender, EventArgs e)
       at System.Windows.Forms.Control.OnClick(EventArgs e)
       at System.Windows.Forms.Button.OnClick(EventArgs e)
       at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
       at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ButtonBase.WndProc(Message& m)
       at System.Windows.Forms.Button.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
    Loaded Assemblies **************
    mscorlib
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3082 (QFE.050727-3000)
        CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
    WsdlServicesGenerator
        Assembly Version: 1.0.0.0
        Win32 Version: 1.0.0.0
        CodeBase: file:///C:/Program%20Files/SAP/SAP%20Business%20One%20Web%20Services/WsdlServicesGenerator/WsdlServicesGenerator.exe
    System.Windows.Forms
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
    System
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    System.Drawing
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
    System.Xml
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3082 (QFE.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
    System.Web.Services
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Web.Services/2.0.0.0__b03f5f7f11d50a3a/System.Web.Services.dll
    System.Configuration
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
    axh7tjvl
        Assembly Version: 1.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    o_2nbqv_
        Assembly Version: 1.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    JIT Debugging **************
    To enable just-in-time (JIT) debugging, the .config file for this
    application or computer (machine.config) must have the
    jitDebugging value set in the system.windows.forms section.
    The application must also be compiled with debugging
    enabled.
    For example:
    <configuration>
        <system.windows.forms jitDebugging="true" />
    </configuration>
    When JIT debugging is enabled, any unhandled exception
    will be sent to the JIT debugger registered on the computer
    rather than be handled by this dialog box.
    I am facing problem While Generating WSDL File from WSDL Geerator which is provided by SAP Business One
    If any body has resolved this. Please help Me...!
    Thanks
    Mritunjay

    Hi.
    We've seen that error too few times.
    We downloaded the sourcecode for the wdsl generator and discovered,
    that in our case, it was because we had no user defined objects.
    Its actually a bug as far as I can see, where the wdsl generator tries
    to enumerate a empty recordset, and crashes.
    Regards
    Jørgen T.

  • Error while generating WSDL

    Hi,
    I am creating a web service which has a method that communicates with the Data access layer (classes that have database connectivity).
    While generating WSDL, I am getting the following error in IBM WSAD:
    "IWAB0132W Boolean property accessor getBoolean in bean Field begins with "get". Boolean getter methods should begin wth "is"."
    This is the error inspite of the fact that there is no boolean data member involved in the code.
    Kindly reply urgently with the possible solutions if anyone of u has come across such an error.
    Thanks in advance
    Karan

    Hi,
    While further investigating the problem, I found out that if i try to return a Vector from my Web Service the error message is thrown, otherwise on returning any other object there is no error.
    I tried to return an array of type Object, but same error was reported. I am using IBM WSAD 5.1
    Please help asap
    Thanks
    Karan

  • I am using Adobe Pro 11 and on opening a pdf I am getting error 'Insufficient Data for an Image'. Please help and provide a workaround if the solution not there.

    Hi all,
    I am using Adobe Pro 11 and on opening a pdf I am getting error 'Insufficient Data for an Image'. Please help and provide a workaround if the solution not there.
    I have already set the preferences to for page view to low zoom settings, and page fit view settings, but it never opens the pdf. Please check and provide a solution asap.
    Thanks in advance!

    Most of the documents have sensitive info on them.  I will have to do some looking for some that i can share, but will get something to upload (dropbox) as soon as I can.
    Thanks for you help.

  • Burn failed: there was an error producing data for the burn

    Getting the following message after trying to bounce a project to CD:
    Burn Fail: There was an error producing data for the burn.
    Using Logic Pro 9. Burn has worked with all projects up til now. Not sure what is different about this one. Still works with old projects. ANy ideas? Thanks.

    Thanks very much for responding John, Minimum was to the CD. I have an Internal Superdrive. it does dvd and cd-rs. At this time, since my original post, I have burned four smallish rolls like 200 photos at 200+ MB's with success. And then I can try less say 100 photos @ 110MB and I get the error, and coaster that is unreadable. I have a partition area on another internal hard drive that I may try to transfer to so I can get these off my computer and maybe reinstall iPhoto. I will try to pop them into a folder and copy with Toast , which i use at times for other projects. I just like the idea of keeping all the rolls in order and not losing any of the data that is part of the originals. Any other ideas would be appreciated. The photos are sort of important.

  • Why do I keep getting an error "insufficient data for an image" when opening a document

    why do I keep getting an error "insufficient data for an image" when opening a document in Adobe Reader XI 11.0.06

    I am also having this problem, especially with scanned documents. Since I need to download scanned documents in my work this is a big problem!Sometimes I can read but not save the document, sometimes one or two of the pages will be blank from the start. I have the latest version of Adobe Reader XI (11.0.10). I tried reducing the page zoom, a suggested workaround on this page: Acrobat: “Insufficient data for an image” error after updating to 10.1.4 or 9.5.2,  but that did not help at all. FWIW I use a Windows 8.1 PC with 4 GB RAM. I usually download PDFs from the internet using Firefox.

  • Error: Inappropriate data for continuous time axis while displaying in Time-series Line in OBIEE

    I wanted to use time series line in my analysis but I couldn't get What kind of data is required for this graph? It shows inappropriate data for continuous time axis. I had total amountmin vertical axis and time(year) in horizontal axis.

    Check this if not helpful then follow 2 links at bottom
    OBIEE - Time Series Conversion Functions : AGO and TODATE | GerardNico.com (BI, OBIEE, OWB, DataWarehouse)
    ~ http://cool-bi.com

  • Error while generating WSDL: AnnotatedNoClassDefFoundError

    Hi Team,
    I am trying to generate WSDL from SOA IG responsibility getting the below error :
    "Service Provider Access resulted in exception 'oracle.apps.fnd.soa.util.SOAException: ServiceGenerationError: ServiceGenerationError: Error in Service Generationoracle/classloader/util/AnnotatedNoClassDefFoundError' when attempting to perform 'GENERATE'. Please view Service Provider logs for more details":
    Prerequisite.
    1. Created  PL SQL package.
    2. Annotated the Package spec as per SOA standard
    3. pasred and created iLDT and uploaded the package spec in IR(Integrated Repository)
    4. Could see the new interface in from SOA Integrated Gateway UI.
    5. provided grants to user
    6. click on generate WSDL button . Getting error.
    Please help.

    Hi Anybody Please help.

  • No posting rules exist for account key while doing purchae order.

    Hi SAP Expert,
      I have following problem while doing purchae order.
    No posting rules exist for account key
    Message no. FF714
    Diagnosis
    No posting rules have been defined for the account key in the tax table in table T007B.
    Please give me reply.
    Thanks in advance,
    Yogesh.

    check MM pricing procedure for any condition account key is assigned and for that account key, no GL is configured in OBYC, if it is related to tax condition type OB40.
    regs,
    ramesh b

  • Mismatched data for "Created By" in generated Purchase Requisitions

    Hi,
    Just wanted to ask question to all gurus that, I see some mismatched data for ‘created by’ for system generated Purchase requisitions. As if I do MRP run using MD40(MPS scheduling run) then system is showing PR created by 'MRP controller' but if I run MRP using MD41(single item multi level), then system is showing the user ids name(the person on whose id MRP run is executed) is showing in the PR.
    As both the MRP runs being executed in the same user id, then there should not be such kind of diffrent data. Due to this mismathced data we are gettting some difficulties in the reporting. 
    Thanks in advance.
    Regards
    Amit

    Hi!
    It's solved. The mistake was on the connection of the tables:
    BUT000 - BUT020 - ADRC
    Thanks and regards,
    Mon

  • CATS - Data Transfer to Target Components via CATA - Error "No Data for Trf

    Hello
    I am recording hours via CAT2 on Network Activity. These hours are then approved.
    However, when I run CATA to transfer the hours to CO and PS, I get popup information "No Data for Transfer".
    When i proceed further , i get another popup saying all records were read and saved successfully, and no. of confirmations generated.
    However, when i run CJI3, I do not see any Actual cost line items.
    Please help
    JG

    Hello Joy,
    (1) Perhaps you have on your profile on CAC1, the "Immediate Transfer to HR" flag set.
    This way you have the "Release on Saving" flag set, all the time you save data, it gets transferred directly.
    (2) But, I see that you are having the issue with the CO and PS, so I highly suggest you to check on if the data is on the interface tables.
      a. First you should make sure that the data exists on CATSDB with Status 30.
      b. Then, you should check the data on CATSPS (Interface table for PS) and CATSCO( interface table for CO).
      c. If you don't have the data on these tables there should be no record after all to transfer.
    Regards,
    Bentow.

  • Idoc INVOIC error Baseline date for payment does not exist

    Dear All,
    I am facing the following error message when processing an idoc to do an MM invoice reception (operation similar to a MIRO).
    The payment term is correctly maintained in the purchase order.
    Idoc message type INVOIC MM.
    Baseline date for payment does not exist
    Message no. M8356
    Diagnosis
    You have tried to post a document without a baseline date for payment.
    The system will not allow you to do this.
    Check the purchase order. No terms of payment have been entered in the document header or no suggestion has been defined in Customizing for the baseline date for payment for the terms of payment entered.
    If you get the error message during automatic settlement of planned delivery costs, maintain the term of payment in the master record (Payment Transactions, Financial Accounting) for the freight vendor or use the Business Add-In MRM_ERS_HDAT_MODIFY to determine the term of payment.
    Regards
    Arnaud

    Hello,
    Date for starting the calculation of the baseline date is indeed managed in the TC OME2 (document date, posting date, etc..).
    In my project, there is already some companies using payment term N60N, so it should be possible to continue using it.
    I solved this issue by putting a payment term in the vendors master data (company & purchasing views) and also in the customers views (company / sales orga) otherwise the structure of the idoc is different.
    Thanks anyway for your input.
    Keep in touch.
    Regards
    Arnaud

  • Compare time depednt master data for two key dates in a report?

    Hello all,
    We have a requirement where we want to see the difference in master data at particular key dates (time dependent master data).
    Like if employee has State = OH till yesterday (12/01/2008) and today it is changed to State =KY (12/02/2008 to 12/31/999) loaded in BW which is time dependent.
    So basically if you run the query for Key date 12/01or before you will see OH as state and if you run query for key date 12/02 or further you will see KY.
    We want to create a report where we want to list employees and compare in two columns basically the previous value and the current value. So input would be two key date variables and the report would look like
    Employee                  Key date 1(state)                  Key date 2 (state)
    Employee1                         OH                                  KY   
    Has anyone done this before, can someone help me doing this?
    Thanks,

    Hi ,
    For this scenario , Can you please create variabale ( From value -- to value ) in the key figure date .And by using the time period in the varaible u can get the employees for both the states ...
    Hope this helps out
    thanks
    PT

  • Sapscript-PDF-Mail error: Insufficient data for an image

    Hi, I've made a function module that takes a Purcharse Orden from spool, converts to PDF file and then send the form via mail. Everything work fine but the corporative logo in the form can't be seen... When I try to open the attachment, Acrobat Reader launchs a popup with the message "Insufficient data for an image" and then ONLY the logo is not displayed.
    Here's the MF code. I'll give points to useful answers. Thank you.
    FUNCTION Z_WF_SENDMAIL_PO_PDF.
    *"*"Interfase local
    *"  IMPORTING
    *"     VALUE(PO_ORDER) LIKE  EKKO-EBELN
    *"     VALUE(DELETE_SPOOL) LIKE  SYST-FTYPE OPTIONAL
    *"     VALUE(FILENAME) LIKE  P05T_RESPONSE-FILENAME OPTIONAL
    *"     VALUE(RECEPTOR) LIKE  SWHACTOR STRUCTURE  SWHACTOR
    *"  EXCEPTIONS
    *"      SENDING_FAILURE
    *"      CONVERSION_ERROR
    *"      NO_SPOOL
    *"      UPLOAD_ERROR
      DATA: T_TSP01 TYPE TSP01 OCCURS 0 WITH HEADER LINE,
            PDF TYPE TLINE OCCURS 0 WITH HEADER LINE.
      DATA: NUMBYTES TYPE I,
            PDFSPOOLID TYPE TSP01-RQIDENT,
            JOBNAME TYPE TBTCJOB-JOBNAME,
            JOBCOUNT TYPE TBTCJOB-JOBCOUNT,
            SPOOLS TYPE I.
      DATA: gd_cnt TYPE i,
            gd_sent_all(1) TYPE c,
            gd_doc_data LIKE sodocchgi1,
            gd_error TYPE sy-subrc.
      DATA: it_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
      DATA: lt_objpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE,
            lt_objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
            lt_objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
            lt_objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
            lt_reclist LIKE somlreci1 OCCURS 5 WITH HEADER LINE,
            l_document_data TYPE sodocchgi1.
      DATA: l_att_lines TYPE i,
            gd_buffer type string.
      DATA: BEGIN OF lt_mails occurs 0,
              bname like usr21-bname,
              smtp_addr like adr6-smtp_addr,
            END OF lt_mails.
      REFRESH : pdf, it_packing_list.
      CLEAR : pdf, it_packing_list.
      SELECT RQIDENT
      INTO T_TSP01-RQIDENT
      FROM TSP01
      WHERE RQOWNER EQ receptor-objid
        AND RQCLIENT EQ SY-MANDT.
        APPEND T_TSP01.
      ENDSELECT.
      IF SY-SUBRC NE 0.
        RAISE NO_SPOOL.
      ELSE.
        SORT T_TSP01 DESCENDING.
        READ TABLE T_TSP01 INDEX 1.
        CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
          EXPORTING
            SRC_SPOOLID              = T_TSP01-RQIDENT
            NO_DIALOG                = ''
          IMPORTING
            PDF_BYTECOUNT            = NUMBYTES
    *        PDF_SPOOLID              = PDFSPOOLID
    *        BTC_JOBNAME              = JOBNAME
    *        BTC_JOBCOUNT             = JOBCOUNT
          TABLES
            PDF                      = PDF
          EXCEPTIONS
            ERR_NO_OTF_SPOOLJOB      = 1
            ERR_NO_SPOOLJOB          = 2
            ERR_NO_PERMISSION        = 3
            ERR_CONV_NOT_POSSIBLE    = 4
            ERR_BAD_DSTDEVICE        = 5
            USER_CANCELLED           = 6
            ERR_SPOOLERROR           = 7
            ERR_TEMSEERROR           = 8
            ERR_BTCJOB_OPEN_FAILED   = 9
            ERR_BTCJOB_SUBMIT_FAILED = 10
            ERR_BTCJOB_CLOSE_FAILED  = 11
            OTHERS                   = 12.
        IF SY-SUBRC NE 0.
          RAISE CONVERSION_ERROR.
        ELSE.
          IF NOT FILENAME IS INITIAL.
            open dataset filename for output in binary mode.
            if sy-subrc ne 0 .
              RAISE UPLOAD_ERROR.
            endif.
            loop at pdf.
              transfer pdf to filename.
              if sy-subrc ne 0 .
                RAISE UPLOAD_ERROR.
              endif.
            ENDLOOP.
          ENDIF.
          IF NOT DELETE_SPOOL IS INITIAL.
            DELETE FROM TSP01 WHERE RQIDENT EQ T_TSP01-RQIDENT.
          ENDIF.
          CHECK NOT ( receptor IS INITIAL ).
          CLEAR: lt_reclist, lt_reclist[],
                 lt_objhead, lt_objhead[],
                 lt_objtxt, lt_objtxt[],
                 lt_objbin, lt_objbin[],
                 lt_objpack, lt_objpack[].
          CLEAR l_document_data.
    * Chequea si fue bajada la orden de spool
          CHECK NOT ( pdf[] IS INITIAL ).
    * Transferir los strings de 132 caracters a strings de 255 caracteres.
          loop at pdf.
            translate pdf using ' ~'.
            concatenate gd_buffer pdf into gd_buffer.
          endloop.
          translate gd_buffer using '~ '.
          do.
            lt_objbin = gd_buffer.
            append lt_objbin.
            shift gd_buffer left by 255 places.
            if gd_buffer is initial.
              exit.
            endif.
          enddo.
    * Cuerpo del mail
          CONCATENATE 'Se adjunta Pedido de Compra' PO_ORDER INTO lt_objtxt SEPARATED BY SPACE.
          APPEND lt_objtxt.
          DESCRIBE TABLE lt_objtxt LINES l_att_lines.
          READ TABLE lt_objtxt INDEX l_att_lines.
    * Titulo del mail
          l_document_data-obj_descr = 'Envio de Pedido de Compra'.
          l_document_data-obj_name = 'Pedido'.
          l_document_data-sensitivty = 'F'.
          l_document_data-expiry_dat = sy-datum + 10.
          l_document_data-doc_size = ( l_att_lines - 1 ) * 255 + strlen( lt_objtxt ).
          l_document_data-obj_langu = sy-langu.
          lt_objhead = 'ORDERS'.
          APPEND lt_objhead.
    * Configuración del cuerpo del mail
          CLEAR lt_objpack.
          REFRESH lt_objpack.
          lt_objpack-transf_bin = space.
          lt_objpack-head_start = 1.
          lt_objpack-head_num = 0.
          lt_objpack-body_start = 1.
    *      lt_objpack-body_num = 1.
          lt_objpack-body_num = l_att_lines.
          lt_objpack-doc_type = 'RAW'.
    *      lt_objpack-doc_size = STRLEN( lt_objtxt ).
          APPEND lt_objpack.
    * Configuración del archivo adjunto del mail
          DESCRIBE TABLE lt_objbin LINES l_att_lines.
          READ TABLE lt_objbin INDEX l_att_lines.
          clear lt_objpack.
          lt_objpack-transf_bin = 'X'.
          lt_objpack-head_start = 1.
          lt_objpack-head_num = 1.
          lt_objpack-body_start = 1.
          lt_objpack-body_num = l_att_lines.
          lt_objpack-doc_type = 'PDF'.
          lt_objpack-obj_name = 'Pedido'.
          lt_objpack-obj_descr = 'Pedido de Compra'.
    *      lt_objpack-doc_size = ( 255 * ( l_att_lines - 1 ) ) + STRLEN( lt_objbin-line ).
          lt_objpack-doc_size = 255 * l_att_lines.
          append lt_objpack.
    * Lista de receptores
          SELECT u~bname a~smtp_addr
            FROM usr21 as u
            INNER JOIN adr6 as a
            ON u~persnumber = a~persnumber
            INTO TABLE lt_mails
            WHERE bname = receptor-objid.
          LOOP AT lt_mails.
            clear lt_reclist.
            refresh lt_reclist.
            lt_reclist-receiver = lt_mails-smtp_addr.
            lt_reclist-rec_type = 'U'.
            lt_reclist-com_type = 'INT'.
            APPEND lt_reclist.
          ENDLOOP.
    * Envio del mail
          CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
            EXPORTING
              document_data              = l_document_data
              put_in_outbox              = 'X'
              commit_work                = 'X'
            TABLES
              packing_list               = lt_objpack
              object_header              = lt_objhead
              contents_bin               = lt_objbin
              contents_txt               = lt_objtxt
              receivers                  = lt_reclist
            EXCEPTIONS
              too_many_receivers         = 1
              document_not_sent          = 2
              document_type_not_exist    = 3
              operation_no_authorization = 4
              parameter_error            = 5
              x_error                    = 6
              enqueue_error              = 7
              OTHERS                     = 8.
          IF SY-SUBRC NE 0.
            RAISE SENDING_FAILURE.
          ENDIF.
        ENDIF.
      ENDIF.
    ENDFUNCTION.

    I guess this could be one of the reasons, check you have authorizations on image.
    Regards,
    SaiRam

Maybe you are looking for