Error( No Device detected) is showing between SX20 & ISDN Link

Hi Team,
we have SX20 & ISDN Link, I have done all configuration in SX20 & ISDN Link but when i search the device in SX20 (peripherals option) for making the pairing between both system than sx20 shows that "No device detected" so i need to your expertise for this resolved this issue.
SX20 Version- TC7.1.1
ISDN Link Version-IL1.1.1
Thanks
Pooran

Would this work for the same issue, but on an EX90?
EX90 Version- TC6.3.0.3d8e7d1
ISDN Link Version-IL1.1.1.2c65b7d
Note: on the isdnlink itself it says "SystemUnit State ParingStatusText: "No connection with [an IPv6 address]"". However, it said it paired. Also, when you go to Config->Peripherals in the web console of the EX90, then ISDN Link, "Status: Inactive", "Mode: Unknown", and the aforementioned IPv6 address is coming up here as well.
IPv6 has no ip address/subnetmask/dgw or anything. Dhcpoptions for this is off, and set to static. unless theres another way to turn off IPv6 entirely.

Similar Messages

Install from SCSI CD fails: ERROR: boot device didn't show up after 30

I have a x86 based server w/SCSI HD and DVD drive.
Install fails with following.
Waiting 30 seconds for device /dev/disk/by-label/ARCH_201108
ERROR: boot device didn't show up after 30 seconds
Falling back to interactive prompt
You can try to fix the problem manually, logout when you are finished
sh: can't access tty; job contro turned off
[ramfs /]#
I hooked up a IDE DVD drive and using same CD installs OK. Then, once installed, I switch my DVD back to SCSI that failed the install, and guess what? Arch booted from my HD now recognizes the SCSI DVD drive, I can mount it and so on. Looks to me like the install kernel doesn't support my SCSI DVD drive but the installed kernel does.
I need the Arch install to work from the SCSI DVD drive on my system. I'm trying to develop an Arch distro for my particular system, which there are about a dozen of in the field, they all have SCSI DVD and no IDE drives. Will I have to add a SCSI driver to the boot kernel? Or is my problem something else?
I notice there is no /dev/disk/by-label (ther is a /dev/disk/by-id by-label and by-uuid).
I do a:
"[ramfs /]# lsmod | grep sr_mod"
sr_mod 14951 0
cdrom 36329 1 sr_mod
scsi_mod 131482 7 sg,sr_mod,sd_mod,libata,mptspi,mptscsih,scsi_transport_spi
[ramfs /]# lsmod | grep scsi
mptscsih 20040 1 mptspi
mptbase 63459 2 mptspi,pmtscsih
scsi_transport_spi 20059 1 mptspi
scsi_mod 131482 7 sg,sr_mod,sd_mod,libata,mptspi,mptscsih,scsi_stransport_spi

scrath "I notice there is no /dev/disk/by-label (ther is a /dev/disk/by-id by-label and by-uuid)."
Should be: I notice there is no /dev/disk/by-label (there is a /dev/disk/by-id by-path and by-uuid).

Blackberry ID linked device does not show up in Blackberry link

Hello all,
I am using a blackberry 10 (software version 10.1) that is registered to my blackberry ID account. Now i want to exchange files through the wireless network between my blackberry and my computer. My computer is running Blackberry Link 1.1.1.32.
When i open Blackberry Link and sign in to my blackberry ID account i expected that the phone would be added to the list of connected devices. However it gives me a error message that the account has no blackberry devices connected to it.
When i connect the phone on the USB port i can exchange information. However i would prefer to exchange date through WiFi and the cellular network.
This I have already tried:
I verified online that the mobile device is registered with that account.
I reinstalled bb link
I tried to logout/login on blackberry link
I have wiped the mobile device
I have pushed the button refresh devices several times over 2 hours (in blackberry link)
I have waited 4 hours.
My phone does show the laptop in the configuration screen 'blackbery link' connected devices. However i cannot choose the device in the file explorer to open it.
Does anyone have a clue what is happening here? It kinda looks like something is wrong with my blackberry ID.

I have factory reset the mobile.Created a new blackberry ID. Hooked up the new Blackberry ID with Link and the mobile and still Blackberry Link cannot find the Blackberry mobile when i click refresh devices in Link.
Where can I get some interactive support? The blackberry support website refers me to the telecom provider/vendor for support. However they plainly say "we dont know, contact blackberry".
Does anyone know who I contact blackberry and how (e-mail/phone) English support is ofc not an issue. The phone is purchaced from KPN the in Netherlands.

Dual Boot Arch & Mac OS X(Boot device didn't show up after 30 seconds)

I was trying to Dual Boot Arch & Mac OS X on my new Mac book pro, I followed the steps (https://wiki.archlinux.org/index.php/MacBookPro)
Dual Boot (Arch & Mac OS X)
Two possibilities:
- Install Bootcamp, resize the Mac OS X partition
When Mac OS X installation is finished. Go on http://refit.sourceforge.net and download rEFIT (Mac disk image)
To install rEFIT, mount the rEFIT.dmg file (it is normally automatic).
There is an other way (refer to rEFIT documentation) but you can open a terminal then you copy /Volumes/rEFIT/efi/ to /
# cp -r /Volumes/rEFIT/efi /
To install rEFIT :
# cd /efi/refit/
# ./enable.sh
Now we can synchronized MBR with GPT partition table thanks to rEFIT so you restart your computer. You can see rEFIT, you press down key to access to the Partitioning Tool. You press y to accept.
Put your Arch Linux CD in the CD-ROM drive first then restart the computer. You can press C to boot from the CD or you can choose it in the rEFIT menu.
Now it is the typical Arch Linux installation.
So I burn the archlinux-2010.05-core-i686.iso to an blank disc on mac then restart the computer , press C to boot from the CD.
After choose to boot Arch linux and then I got this
Waiting for 30 seconds for device /dev/disk/by-label/ARCH-201005...
ERROR:boot device didn't show up after 30 seconds...
Falling back to interactive prompt
You can try to fix the problem manually, log out when you finished /bin/sh: can't access tty;
job control turned off
[ramfs /]#
[ramfs /]#
Any ideas?
Thanks!

heleos wrote:
This line:
Waiting for 30 seconds for device /dev/disk/by-label/ARCH-201005...
You need to make sure that's the exact name of your iso disc. If it's not, it isn't a big deal. I've run into problems on this with my arch USB drive.
Once you get to the [ramfs /]# prompt, type in:
mv /dev/disk/by-label/(insert name of the current cd here) /dev/disk/by-label/ARCH-201005
exit
It should then be able to boot from the cd
did:
mv /dev/disk/by-label/(insert name of the current cd here) /dev/disk/by-label/ARCH-201005
exit
shows:
ERROR: mounting was successful, but /bootmnt/isomounts file doex not exist.
Then I checked:
cd /bootmnt
ls
archlinux-2010.05-core-i686.iso
exit
shows another problem /boot/init does not exist
exit
kernel panic!

The driver detected a controller error on \Device\Harddisk1\D

Hope someone can help, yesterday in the event viewer I encountered the following error
"The driver detected a controller error on \Device\Harddisk1\D
....I have added no new hardware for months, I checked this out on the microsoft website but they recommend changing the cable!
I ran diagnostics on the hard drives and they found no errors at all ....I got a feeling it the motherboard, frustrating as this is the second board Ive had!
Can anyone advise on this error?
My setup is as follows
P4 3.2GHZ
1GB Transcend Memory
1 NEC 2510 DVD Wrtier
1 IDE 120GB Maxtor Diamond Max
2 X SATA HDD
450 watt Thermaltake Butterfly PSU

This seems to be a common problem between ICH5 chipsets and SATA NCQ drives. Apparantly a BIOS update will be able to fixed the problem but I'm not sure which BIOS you should use. I suggest that you check MSI's website to look into your mobo's BIOS release notes to find out more first.
Please also note that there's an amount of risk to flashing your mobo's BIOS as and improper flash will caused the mobo to die immediately or having multiple errors due to bad flash. I would recommend that you flash through a floppy bootdisk which seems to be the best method till date.

Atheros ar5b95 generates 104 Error: incompatible wireless device detected

The intel wireless card failed in CQ61 - 425SA. So i ordered an Atheros AR5B95 that is listed as compatible here at the HP site and at the manufacturer's site.
Unfortunately, the machine won't boot with the card inserted, generating error message 104: Incompatible Wireless Device Detected.
I had a look at the BIOS but it's up to date (F.23) and there appears to be no place in the setup menu where I can indicate a different wireless card. I tried installing new drivers but, of course, if the machine won't book I can't install the drivers for the card.
The card is imprinted with the AR5B95 identity and Atheros branding, so I presume it's genuine.
Any help would be greatly appreciated.

hp implement whitelisting of wifi cards in BIOS, your original intel would of had hp part number that matched with allowed numbers in the BIOS thus boot without 104 error > your current atheros is a generic atheros card & the BIOS sees no matching part number so flags 104 error.
You have 2 choices, 1: buy a correct hp branded card that is supported by your BIOS , 2: install a no whitelist BIOS so you can use any wireless card .
No whitelist bios link below >
http://www.bios-mods.com/BIOS/index.php?dir=Whitelists%2F&download=sp51527_NWL_EISTUlk_MoreOptions_B...
You may need tape pin 20 on the atheros card with some scotch tape & use windows 7 mobility centre to toggle wifi on/off
Like my post? Click Kudos (thumb+) to show appreciation.

An error was detected on device \Device\Harddisk3\DR3 during a paging operation. - The driver detected a controller error on \Device\Harddisk3\DR7

How can i ensure that the harddisk3 designation is relatd with USB etxernal disk?
I have several erros in LOGs:
An error was detected on device \Device\Harddisk3\DR3 during a paging operation.
and
The driver detected a controller error on \Device\Harddisk3\DR7
All times are HardDisk3 and sometimes it references to DR3 and sometimes DR7
My disk structure is:
2 RAID5 arrays fomr the same disks (80GB and 2 TB)
and USB 2 TB External hard disk with several partitions
I´m 99% sure that the error is related to the external USB disk and the Dell DIag tool shows no problems with any component
DISKPART> list disk
Disk ### Status         Size     Free     Dyn Gpt
Disk 0    Online           80 GB      0 B
Disk 1    Online         2711 GB      0 B        *
Disk 2    Online         1862 GB 1024 KB
DISKPART> sele disk 0
Disk 0 is now the selected disk.
DISKPART> detail disk
DELL PERC H700 SCSI Disk Device
Disk ID: 6EFE3928
Type   : RAID
Status : Online
Path   : 1
Target : 0
LUN ID : 0
Location Path : PCIROOT(0)#PCI(0400)#PCI(0000)#RAID(P01T00L00)
Current Read-only State : No
Read-only : No
Boot Disk : Yes
Pagefile Disk : Yes
Hibernation File Disk : No
Crashdump Disk : Yes
Clustered Disk : No
Volume ### Ltr Label        Fs     Type        Size     Status     Info
Volume 3         System Rese NTFS   Partition    100 MB Healthy    System
Volume 4     C   DISCO        NTFS   Partition     79 GB Healthy    Boot
DISKPART> sele disk 1
Disk 1 is now the selected disk.
DISKPART> detail disk
DELL PERC H700 SCSI Disk Device
Disk ID: {A42559A8-43EF-4570-B4CF-336A22A718BF}
Type   : RAID
Status : Online
Path   : 1
Target : 1
LUN ID : 0
Location Path : PCIROOT(0)#PCI(0400)#PCI(0000)#RAID(P01T01L00)
Current Read-only State : No
Read-only : No
Boot Disk : No
Pagefile Disk : No
Hibernation File Disk : No
Crashdump Disk : No
Clustered Disk : No
Volume ### Ltr Label        Fs     Type        Size     Status     Info
Volume 5         DADOS        NTFS   Partition   2711 GB Healthy
    C:\DADOS\
DISKPART> sele disk 2
Disk 2 is now the selected disk.
DISKPART> detail disk
HP External HDD USB Device
Disk ID: 000904F0
Type   : USB
Status : Online
Path   : 0
Target : 0
LUN ID : 0
Location Path : UNAVAILABLE
Current Read-only State : No
Read-only : No
Boot Disk : No
Pagefile Disk : No
Hibernation File Disk : No
Crashdump Disk : No
Clustered Disk : No
Volume ### Ltr Label        Fs     Type        Size     Status     Info
Volume 6         SOFTWARE     NTFS   Partition    300 GB Healthy
    C:\DADOS\DISCO-EXTRA\
Volume 7         TEMPORARIO- NTFS   Partition    148 GB Healthy
    C:\DADOS\NEW_TRANSF\TEMPORARIO\
Volume 8         TRANSF_LIXO NTFS   Partition    149 GB Healthy
    C:\DADOS\NEW_TRANSF\TRANSF_LIXO\
Volume 9     R   RESTORE      NTFS   Partition   1264 GB Healthy

Hi,
For finding the exact hard disk you could refer to this article. It is an old article but the structure is not changed:
How to Distinguish a Physical Disk Device from an Event Message
http://support.microsoft.com/kb/159865
Meanwhile for the error message "error was detected on device \Device\Harddisk3\DR3 during a paging operation", according to my search result it could be related to fragments. So please try a defragment on your hard disk (if it is the USB disk then perform
a defragment on USB disk) and see the result.
If you have any feedback on our support, please send to [email protected]

Iphone 5- Won't show up in itunes. Error message " Device drivr software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. Digital Still Camera- Failed" HELP!

Error message " Device driver software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. Digital Still Camera- Failed" HELP!

Hi, I was able to reformat my iPod and that worked. I read it on one of the threads and I am copy pasting the method below:
I opened the "My Computer" window and right-clicked on my ipod, and then selected "Format". I select "Yes" to format since I don't have anything on the nano to delete anymore.
I then Eject my nano from the computer and did a restart while the nano is disconnected from the computer.
Once Windows finish loading I reconnect the USB to the nano(back of computer) which automatically pulls up iTune. It asked me to name the new ipod detected and created a playlist for that specific ipod name.
Pasted from <http://discussions.apple.com/thread.jspa?threadID=1050784&tstart=15>
Thanks!

TS1363 Error message for my ipod touch, ipad and Nano. they all say the same thing " there has been a device detected, but cannot be identified properly. please disconnect and re-connect ipod properly". i have done all it asks, and still nothing help.

can anyone help me try to figure out whyall 3 of my devices jsut stopped beign acceptd on my itunes? ipod touch, nano 6th gen and ipad. none of them will be read on my itunes, yes i have uninstalled and re installed my itunes and plugged and unpluggd the devices and i have reset them numerous times. so what next?

Doublechecking. In the course of your troubleshooting to date, have you worked through the following documents?
iPod nano: Error message saying that iPod 'could not be identified properly'
iOS: Device detected but not identified properly on iTunes for Windows

DV7 - Error 03F0 - No Boot Device Detected - Passes both Memory and HDD Test

Hi there,
My DV7 will not boot up at all. When powered on, I see the HP loading screen briefly, then into "dos type" font saying "No Boot Device Detected - Error 03F0"
I have run both the memory test and hard drive test from the diagnostic menu and both come back ok.
A little more history on the Device/Problem;
2 months ago it was shutting itself off due to overheating - After a good cleaning, the temps cooled down enough that it was no longer shutting off.
I am currently in India, plugging directly into outlets (230v power) using an adapter. 10 days ago there was a small spark at the outlet leaving a very small spot on one of the prongs of the adapter. There was no power flicker, and it wasn't a surge, just almost like a bad connection sparking. This "spark" seemed to have killed my charger immediately. I used the battery until nearly dead, purchased a new charger, but when I returned and tried the new charger, it would not charge, nor power on. When plugged in, at this point, the power/charging light on the side was lit, but not on the front. I used a pin to open the CD drive, and the front light lit up, but it still would not power on.
I took it to a repair shop here in India, and they managed to get it so it would power on (not sure how), but that has only brought me to where I'm at right now with the Error. They said "It worked, and then we tested again and it didn't work and now it no work".
My current BIOS edition is F.46.
Essentially I'm wondering if I'm screwed - and if I'm not, then what can I do to trouble shoot/fix it?
P.S. Finding parts in India that are specific to my computer will be near impossible with the technology differences. Also, dealing with local techs is extremely difficult so I'll need to know
P.S.S. I just tried to power it on again to double check the accuracy of my post and it will not power on, nor can I get the CD drive open again....

Is the unit still in warranty?
Based on the description of the behavior, it does sound a hardware issue beyond the hard drive.
Was the AC adapter that was purchased an HP adapter? I know you said it is difficult to get the right parts in your area, but I want to confirm if it is an HP adapter or aftermarket.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

I am running Lion 10.7.2 and I have an external drive hooked to my time machine. I can't rename folders and when trying, I get an error code 8076. The checkbox "ignore permissions for this device" does not show on volume info. Help please???

I am running Lion 10.7.2 and I have an external drive hooked to my time machine. I can't rename folders and when trying, I get an error code 8076. The checkbox "ignore permissions for this device" does not show on volume info. Help please???

The TIme Machine volume does not have that checkbox.
I think the issue is with your Finder...
Go to Finder "Go" menu hold the option key and choose Library. Then go to Preferences trash these files:
com.apple.finder.plist
com.apple.sidebarlists.plist
Then, restart, or log out and in again.
(You will have to reset a few finder prefs the way you like them.)

My pavillion dv2410us stops at an error message 104 unsupported wireless network device detected.

error at start for hp dv2410us stops at black screen with the next error message
error 104 unsupported wireless network device detected. System halted. remove device a start

Hi:
Did you just install a wireless card? You get that error if you install an unsupported wireless card. If you did not make any changes to your PC then I don't know what to tell you.
Paul

TS3694 iOS: Device detected but not identified properly on iTunes for Windows error 54

iOS: Device detected but not identified properly on iTunes for Windows error 54 my iPhone 4s ois 7.1.2 my pc is windows 8.1 my iTunes ver 11.3.1.2. I cant sync with itunes

Look in your Pictures folder and delete the iPhone Photo Cache.

Satellite P300-156 - driver detected controller error on \Device\Ide\IdePort1

Hi
I have recently installed a secondary hard drive in my P300-156 and am having some problems with it. I keep getting Event ID 11 in the system event log "The driver detected a controller error on \Device\Ide\IdePort1." and suffer with very bad performance with this drive.
The drive is new and works fine in other systems and even works ok if I swap drive bays on my P300-156 but the problem with that is the drive does not fit in the other bay as it is quite thick. The drive in question is a Samsung HM100UI 2.5" 1TB Sata. I have also tried other drives in this bay and they work ok too.
I am using windows 7 ultimate and Intel chipset drivers. It's an Intel ICH8M SATA AHCI controller, driver version 7.0.0.1013. Have tried different drivers and AHCI/IDE mode. Also tried a fresh installation and the problem persists.
Am at a loss why this drive is having problems is there anything else someone can suggest to try?
Thanks in advance.

> {quote:title=peterk_1 wrote:}{quote}
> Not all drive bays are made equal. The P500 second bay takes the "thicker" 2.5" drives.
>
> The current Intel chipset "driver" is v10. I have it installed BUT the installation if you want to do a complete install is not a simple task. If you download and unpack you can point the driver update to that location. Start at Intel.com
Thanks!! This worked! It seems the Intel INF auto update utility didn't update them to the latest. I had to download the [RST and AHCI Driver and GUI|http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=20110&lang=eng] and manually search for new drivers in device manager. Now the drive is noticeably quicker and error free :)
Thanks for all the help guys :)

The driver detected a controller error on \Device\Harddisk1-4\DR1-4.

Hello all
I just recently bought a new gaming PC on black friday and is running just fine. Then one day i decided to take a look in the event log and i notice an error that would appear four time during startup of the machine.
The driver detected a controller error on \Device\Harddisk1\DR1.
The driver detected a controller error on \Device\Harddisk2\DR2.
The driver detected a controller error on \Device\Harddisk3\DR3.
The driver detected a controller error on \Device\Harddisk4\DR4.
I only have one internal hard drive located on disk 0 and an external located on disk 5. So i have no idea why i'm getting this error when nothing is connected.
I installed the latest controller drivers and just for fun everything else related to my GIGABYTE motherboard but unfortunately still occurs after turning my computer. (note for the bios i have version F4 not sure if updating it to F5 is worth doing for
this issue).
If anyone could help me with this error or if i can just ignore it.
Thank you

Angel
If the drive is an SSD update the firmware.
Are the message an error (red symbol) or a warning (yellow symbol)?
I would also run CHKDSK and get the diagnostic utility (and run it of course) from the HD mfr.
CHKDSK /R /F
Chkdsk disclaimer: While performing chkdsk on the hard drive if any bad sectors are found any data available on that sector might be lost so as usual backup your data.
Run CHKDSK /R /F from an elevated (Run as administrator) Command Prompt.
Do this for each hard drive on your system.
When it tells you it can't do it right now - and asks you if you'd like to do it at the next reboot - answer Y (for Yes) and press Enter.
Then reboot and let the test run.
It may take a while for it to run, but keep an occasional eye on it to see if it generates any errors.
http://www.howtogeek.com/howto/windows-vista/guide-to-using-check-disk-in-windows-vista/
See "CHKDSK LogFile" below in order to check the results of the test.
CHKDSK LogFile:
Go to Start and type in "eventvwr.msc" (without the quotes) and press Enter
Expand the Windows logs heading, then select the Application log file entry.
Double click on the Source column header.
Scroll down the list until you find the Chkdsk entry (wininit for Win7) (winlogon for XP).
Copy/paste the results into your next post.
Wanikiya and Dyami--Team Zigzag

Error( No Device detected) is showing between SX20 & ISDN Link

Similar Messages

Maybe you are looking for