ERROR no 'DynamicConfiguration' element in the XI Message header
Attempt to process file failed with com.sap.aii.adapter.file.configuration.DynamicConfigurationException: The Adapter Message Property 'FileName' was configured as mandatory element, but there is no 'DynamicConfiguration' element in the XI Message hi am getting error .
and i am not getting
When we run our file to file scenario we can now see that there's a new section called DynamicConfiguration....
will you please tell me what should i do . i have configured
adapter specifc properties
thanking you
please help me it is very urgent
thanmking you
sridhar
Hi sridhar,
Since your scenario is proxy you are getting this error as there is no concept dynamic configuartion for PROXY.
It is part of file adapter. Yet you can set value for FileName if your scenario is PROXY To FIle
DynamicConfiguration conf = (DynamicConfiguration)
container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey KEY_FILENAME = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String Filename = arg[0]; // means you have to pass the file name(ABAP PROXY) from Source structure to UDF as a parameter.
conf.put(KEY_FILENAME, Filename );
what is your scenario. ABAPPROXY -
>?
Thanks
Gujjeti
Similar Messages
-
Is there a way to access the date in the XI message header
Hello,
Is there a way to access the date in the XI message header i.e. the date on which XI has received a particular message.
Regards,
Sylvesteryes you can.
ref: http://help.sap.com/saphelp_nw04/helpdata/en/b3/9a2aeb24dc4ab6b1855c99157529e4/content.htm -
Please Help. I received 4 emails from 1 person with the same message heading. The emails were automatically grouped Apple Mail. I replied to the latest mail in the conversation. Once sent the other messages in the conversation disappeared. I NEED THEM BACK! They all had very important attachments. I have tried looking for them in deleted items, even though I didn't throw any of them away, still cant find them. Never had this problem before. I'm pretty sure its a setting somewhere. Also tried expanding all conversations, no luck. Searching for the mails under the sent email address, no luck.
I'm sure they are not deleted but have somehow been hidden by Mail. Very frustrating.
Thanks in advance for any help.
Kash.I have found found out what has happened. I had requested a statement dating back to April 2012 from a supplier. They replied back with the latest statementof 2013 only but used the same subject heading as the previous monthly statements. Apple Mail automatically grouped these and I thought that they were sent altogether. As soon as I replied to the last email all other the previous emails ungrouped from the conversation leaving me lost as to where they had gone. They were all still sitting in my inbox but no longer part of the trcked conversation. I searched under the subject heading and all individual mails were all still there. (feeling stupid - )
-
My iPod is corrupt according to iTunes, however it won't restore through iTunes either. I've tried to reformat the drive. Makes no difference. I've tried to reformat after choosing disk manager, and again the same result. The iPod takes forever to work through the reformatting process and I get the same message "Itunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod" and then my pc tells me to format the disk.
It's so frustrating, is there a fix to this? It seems like the iPod could still function, but I'm missing the way to get out of this loop, please help me!Likely a hard drive fault, see the note that i wrote few years ago, hopefully it helps
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921�
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
http://www.ipodresq.com/index.php
http://www.ifixit.com/
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
Spank your iPod
http://www.youtube.com/watch?v=3ljPhrFUaOY
http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevant_history/2004/11/meeting_the_sad.html#comment -10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
Cant put it into disk mode
http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
I think my iPod just died its final death
http://discussions.apple.com/thread.jspa?messageID=3813051
Apple logo & monochrome battery stay
http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
My iPod ism’t resetting and isn’t being read by my computer
http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote -
Error status code 400 with the description Message mapping failed
Hi,
I tried to build RFID outbound scenario using ECC 5.0, XI and AII 2.1.
When I send IDOC message:AIDOPMSG.AIDOP01 from ecc 5.0 to XI(ouput message type is OperationalIn and message mapping is OperationalInTo), i get following error:
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>Message mapping failed</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>Message mapping failed</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP response contains status code 400 with the description Message mapping failed Boundary SAP_57D7D47469E09543A1EA0002CBDA0492_END could not be found</SAP:Stack>
I am using standard AUTO-ID 2.1 XI contents. If any of you have encountered such error message, then could you please help me understand the meaning and how to fix it.
thanks in advance,
Ashithi Ashit,
take a look at my weblog on how to test your mapping:
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
maybe with this you'll be able to find out the error
Regards,
michal -
An error 403 saying request can not be completed,keeps on popping when i try to sign in on iCloud,what should i do to successfully sign in?
You should sign in to icloud on another device and once you do - you will be able to sign on that one.
-
'Variable Substitution' error - Expected numeric element index
Hello everyone!
I'm using the 'variable substitution' property in XI to replace the filename of the output file to a value in the message payload.
Here are the parameters I provided:
File Name Scheme: %filename%.xml
Variable Name: filename
Reference: payload:ORDERS05,1,recordset,1,IDOC,1,E1EDK02,BELNR,1
I'm getting this error in the adapter engine:
Caught exception while initializing variable substitution engine: Cannot parse pseudo-path for variable substitution: 'filename': Expected numeric element index, got 'BELNR': For input string: "BELNR"
Can anyone tell me what this means, and how I can fix this problem?
Thanks in advance!
GlennYup, raj! it's IDOC to file.... I did what you asked but I'm now getting this error:
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: The Adapter Message Property 'FileName' was configured as mandatory element, but there is no 'DynamicConfiguration' element in the XI Message header: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: The Adapter Message Property 'FileName' was configured as mandatory element, but there is no 'DynamicConfiguration' element in the XI Message header
any idea what it means?
Kind regards,
Glenn -
IOS error messagge - I keep getting the following message when I try to update my iPad2 - unable to install update, an error occurred installing IOS 8.1.2. How can I fix this?
Which way are you trying to update? WiFi or iTunes? In either case, I would try restarting/rebooting all devices and then try again.
IF you are using iTunes, eject your iPad, quit iTunes, reboot your computer and reset your iPad by holding down on the sleep and home buttons until the Apple logo appears on the screen. After the iPad starts up, connect to iTunes and try again. You may also want to disable your firewall and antivirus software when you try to update using iTunes. Sometimes those will interfere with the download.
If you are using WiFi, reset the iPad as described above and try again.
If WiFi updating will not work, try using iTunes, if iTunes will not work, try using WiFi. -
PI 7.0 SOAP message reply HTTP 500 and after the fault message
Hello Everybody,
I have the scenario RFC -> XI -> SOAP in synchronous mode.
I use for the mapping XSLT because I have to put some dynamic data comming from the RFC in the header of envelope.
At level of adapter receiver SOAP , I flag the "do not use envelop"
In normal, that works .
When the is an fonctionnal error in SOAP service, it sends me back an error HTTP 500 and afterwards the fault message in a soap envelop format. In that case, how can I pass over this error to treat the envelop because in adapter, it is stopped and it returns a short dump to the RFC.
Is there somebody who can help me with this problem ?
Thanks in adavance for your answers .
Regards.
Eric.Hi,
In case of a SOAP error while processing the request, the SOAP HTTP server MUST issue an HTTP 500 "Internal Server Error" response and include a SOAP message in the response containing a SOAP Fault element
Thanks,
RamuV -
Itunes will not open on my computer. It was working just fine. I get an error message "the program can't start because MSVCR80.ddl is missing from your computer. Try reinstalling to fix program." I have tried this. I then get the error message "Error 7(windows error 126)"
I also get the following message during the download of itunes"Apple mobile device failed to start. verify you have suffcient privileges to start system services.'Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99642) -
Retrieving the Message Header In Asyn Scenario With Sender As Client Proxy
Hi All,
I have a asynchronous scenario (XI to SOAP),where on the sender side Client Proxy is being triggered by an ABAP Report.
My problem is,that as the Proxy is in Sender Side I am not able to get the Message Header (i.e. the Standard Header Structure for Proxy Scenarios which I need to send as an input for creating Alerts).
This message header is automatically populated when I fill it up via message mapping in case of Server Proxy...But for Client Proxy(Async Case)...I am not able to make out......
The Structure Is:
SYSTEM_OF_ORIGIN
SENDER_INTERFACE
SENDER_NAMESPACE
MESSAGE_ID
SENDER_SERVICE
RECEIVER_INTERFACE
RECEIVER_NAMESPACE
RECEIVER_SERVICE
PROCESS_AREA
How can this message header be automatically retrived in the ABAP Code ????
Please help!!!!!!
Regards,
SriparnaHi,
plz find all header variables, explanations and examples at [SAP help: Querying the XI Message Header|http://help.sap.com/saphelp_nw2004s/helpdata/en/a1/082589fc4246f09793039d5fb01a17/content.htm]
Regards,
Udo
Edited by: Udo Martens on Jul 20, 2010 12:35 PM -
JWSDP1.4 Access the SOAP Message in an RPC server
hi i am new to web services... i have created RPC using JSWDP 1.4.
I used the wscompile and wsdeploy tool to create the WSDL and server side of the web service.
but because of a requirement change now i have to get the SOAP message Header and verify the client details (log who is using my service). How can i access the SOAP header??Make a backup then edit this file,
TomcatRoot: ./shared/classes/com/tarantella/tta/webservices/client/apis/Resources.properties
Edit all locations to point to https://localhost:443 -
URGENT ::: How to add UserName Token to SOAP Message Header.
Hi,
I created a webservice client using CLIENTGEN utility of weblogic from the WSDL file. When I am trying to call a webservice which is hosted on TOMCAT server, I am getting the following exception::
5/12/2008 06:09:02 com.sun.xml.wss.impl.filter.DumpFilter process
INFO: ==== Sending Message Start ====
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-
instance" xmlns:enc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:ns0="http://settlementService.au.db.com/types">
<env:Body>
<env:Fault>
<faultcode xmlns:ans1="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">ans1:FailedAuthentication</faultcode>
<faultstring>Message does not conform to configured policy [ AuthenticationTokenPolicy ]: No Security Header found</faultstring>
</env:Fault>
</env:Body>
</env:Envelope>
==== Sending Message End ====
The webservice ic configured as secured webservice, there is some certificate file which was provided to me from client. Useing java KEYTOOL command I have created the keystore from that certificate and configure it in the weblogic server console.
Issue is the SOAP message header is blank I need to add the USERNAME TOken profile to this header, in order to access this webservice. The current CLIENT code snippet is shown below:
try{
String WSDLUrl = "https://shappzu2.au.db.com:8297/settlementService-ws/settlementService?WSDL";
String wsUserName = "tracer-us";
String wsPassword = "R0na!do#11";
InputStream[] policies = new InputStream[]{Client.class.getResourceAsStream("/wl-unt-policy.xml")};
SettlementService_Impl settlementServiceObj = new SettlementService_Impl(WSDLUrl);
SettlementServiceFacade port = settlementServiceObj.getSettlementServiceFacadePort(policies, policies);
List credProviders = new ArrayList();
CredentialProvider cp = new ClientUNTCredentialProvider(wsUserName.getBytes(), wsPassword.getBytes());
credProviders.add(cp);
Stub stub = (Stub)port;
// Set stub property to point to list of credential providers
stub._setProperty(WSSecurityContext.CREDENTIAL_PROVIDER_LIST, credProviders);
if(sharesXMLString != null && sharesXMLString.length() > 0) {
port.loadEquityTrade(sharesXMLString);
}catch(Exception e){
//throw new SystemException(e.getMessage());
e.printStackTrace();
Can any one help me in this?1) Use something like TCPmon https://tcpmon.dev.java.net/ or verbose logging to see the actual message content on the wire that the client is sending
2) Inside the WLS samples there is a UNT sample in the INSTALL_DIR/wlserver_10.0(or equivalent)/samples/server/examples/src/examples/webservices/security_jws
If that works correctly and puts the UNT in the header, then I would compare that code with yours. -
I installed a new printer and now Photoshop Elements tells me I can't print. The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You will need to check your printer settings before printing." I have uninstalled and re-installed Photoshop Elements, checked my printer settings and still I can't print a photo.
Hi ,
Please update to PSE 13.1
13.1 has solved this problem.
Refer to this link.
Photoshop Elements Help | Printer errors with Photoshop Elements 13 -
What's error 1 in adobe photoshop elements configuration? I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninstall and reinstall. I have done this but the message continues to appear
You haven't mentioned which version of PSE. If it is PSE 13, that requires a minimum of windows 7.
Maybe you are looking for
-
Report for materials sent out side receipt tracking
hi gurus, I have a requirement that the materials sent outside for subcontraction purposes, after the work completed, should be back with in 180 days, i m not finding any standard report, can any body suggest to view without any development of report
-
hi i have recently had my mac hard-drive replaced and consequently have lost all my old stuff - had to download a new itunes for example. i synced everything onto my iphone before it broke luckily. some songs i purchased on itunes, others i downloade
-
Hello my name is jose quant, and let me know how I can use CAMERA RAW adobe bridge because the bridge use and want to open a camera raw image, I get a message that says: MAIN BRIDGE aplicaion NOT ACTIVATED. BRIDGE REQUIRES A PARTICULAR PRODUCT HAS BE
-
Scroll bar in JPopupMenu when used in JList
Hi, I want variable list (not combo box) where I can add multiple JMenuItems through JPopupMenu. I have created JList in JScrollPane and I have added multiple JMenuItems one by one but in output I am getting the list of JMenuItems without scrollbar.
-
Networking between my Mac Pro and a Windows 8 machine was working fine. Bought a new router: Netgear Prosafe FVS318G. Now the two machines won't connect. I checked the settings in the router and they are as advised by the Netgear manual. Both machin