Error: No Entries were Found In the Catelog (IW52)

Hi,
After creatinf the SD Doc from Notification I am trying to send it (Using Send mail from Task,  in the Action Box).  The task has been created, but when I click on "Send Mail From Task", I get an error, "No Entries....".
Can anyone please suggest a reason/solution.
-Sid
<removed_by_moderator>
Edited by: Julius Bussche on Sep 8, 2008 1:04 PM

Thanks for the reply. Yes, email id is configured.
what is meant by catalog here ?

Similar Messages

  • Notification print Error message :- No entries were found in the Cataloge T

    HI All ,
    when  printing  the notification throgh the transaction ISQ2 , I have released the Notification as well the task , even i have tested to complite status also  , but when i am going to Pint the notification i am getting the error message like  no entries were found in the cataloge T.
    Is there any custunization missing or the possibility of autherisation issue , i have checked the cataloge & assignmnet also in cust , it is proper ,
    Regards
    piyush

    resolved throgh debugging , the short text & long text is not maintain for the Catalouge.

  • Lync Topology fails with error (Mutliple Entries were found for type "ms_RTC-SIP-EdgeProxy")

    Hello everyone,
    After I have finished with Lync FE, Monitoring and Archiving, and WAC server I was going well with Edge server until I got to the point of publishing the topology with Edge Server.
    First time publishing went well but I wanted to place the configured IP addresses in the Edge server IP topology with a different IPs and when I published i got the below error.
    I tried looking in the trusted Services in Configuration OU using ADSI Edit but never was able to figure out how do I find the duplicated entries? I used also used Softerra LDAP adminsitrator and was able to find 5 values but not sure which one to delete
    among them.
    Could anyone advise where to look? I'm posting the error as well below
    Error: Multiple Active Directory entries were found for type "ms-RTC-SIP-EdgeProxy" with ID "egelyncedge.domain.local".
    ▼ Details
    └ Type: InvalidDataException
    └ ▼ Stack Trace
        └  
    at Microsoft.Rtc.Management.Deployment.AD.ADSessionExtension.FindUnique[TResult](ADSession session, QueryScope scope, ADObjectId containerId, QueryFilter filter, String name, Boolean throwOnMissing)
    at Microsoft.Rtc.Management.Deployment.Core.CompatEdgeProxy.Remove(ADSession session, String edgeProxyFqdn)
    at Microsoft.Rtc.Management.Deployment.Roles.AccessEdge.GlobalDeactivate(IService service)
    at Microsoft.Rtc.Management.Internal.Utilities.LogWriter.InvokeAndLog[T](Action`1 action, T arg)
    2/19/2014 12:25:28 PM
    Error
     └ 
    Error: An error occurred: "System.IO.InvalidDataException" "Multiple Active Directory entries were found for type "ms-RTC-SIP-EdgeProxy" with ID "egelyncedge.domain.local"."
    Mohammed JH

    Hi,
    Glad to hear you have solved the issue and shared the train of thought.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • I have an alert message in disc utility. Error: storage system verify or repair failed. Problems were found with the partitian map which might prevent booting.

    While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

    While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

  • SignTool Error: No certificates were found that met all the given criteria

    I have a project which was developed with VS2010.
    I tried rebuild this project with VS2013 Professional and I got the error messages as indicated in the subject.
    What is this error? Why I got this error?
    Hyung-Ho Kim

    Hi Kim,
    As you said that it is the VS2010 project, so it worked well in VS2010, am I right? If so, which kind of project did you create?
    >>SignTool Error: No certificates were found that met all the given criteria.
    I did some research about it, it seems that it is related to the setup project.https://social.msdn.microsoft.com/Forums/en-US/143a914b-1c45-467f-9827-d38b95db11a1/signtool-error-no-certificate-were-found-that-met-all-the-given-criteria?forum=winformssetup
    Is it the Setup and Deployment project with the InstallShield tool?
    If so, as far as I know we didn't support this tool in VS2013 IDE now, but you could post this issue to this forum here:
    http://community.flexerasoftware.com/forumdisplay.php?133-InstallShield
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Idvd5.01 Errors were found during the burning process (Burned Finished)

    I've never had this problem before, but i'm trying to burn a dvd after all the media and dvd are ready for burning and when I click on the burn icon the following message pops up: Errors were found during the burning process. I've check to make sure nothing is hanging outside the title safe area. Any suggestion to why I'm getting this error.

    Hello, Oscar,
    This message can mean several things.
    First, are you burning an iMovie or a slideshow or both?
    Do you have chapter markers in your movie? Are they on or withing 2 seconds of any transition or at the beginning of your movie?
    Does everything encode properly?
    Are you able to 'save as disk image'?
    Post back with some more details about your project.

  • Errors were found during the burning process!?!?

    I finished importing a movie off of my DV Camera and clicked "share" in the iDVD '06 menu. I selected iDVD and my movie was sent into iDVD 6. After customizing a menu, and inserting a blank disc, the burning process was started. After iDVD6 has finished "processing" and "rendering" the menus and the movie, the progress bar for the action "burning your DVD" pops up. About a quarter of the way through I get a window which says the following:
    Burning Finished
    Errors were found during the burning process.
    After clicking "Details" it says:
    The recording device reported the media error: Write error. (0x0C, 0x00.)
    I have tried burning a movie on all DVD types available.(DVD-R DVD+R DVD RW) Why does this problem keep occurring? Is there a problem with my superdrive?

    Hello Ilzmaster,
    the cause could be your burner, but it's much more likely that high burn speed is the culprit - and you can't control that in iDVD.
    Try creating a disk image (File > Save as Disk image). This creates an .img file on your HDD, that can be stored for future use and gives you the option to preview your DVD on your Mac before burning to disc.
    Next use Disc Utility or Toast to burn your DVD at slow speed. 4x is acceptable, 2x (... or even 1x) is better.
    Use only high quality DVD-R (not DVD+R) media (e.g. Verbatim) to minimize burn errors and compatibility issues. Make sure the DVD is compatible with slow burn speed (e.g. 1x-4x)
    Also: iDVD likes to have the project(s) on your startup disc with 15 - 20 GB of available disc space
    hope this helps
    mish

  • CS4: Unable to install any CS4 product. error:"critical errors were found in the setup"

    I am trying to install adobe photoshop and dreamweaver CS4 on my windows xp. But both of them during the loading of setup file returns the following error:
    "Crtical errors were found in the setup. check the setup log file for details."
    I checked the log file and found the following lines relevant to the error:
    C:\Program Files\Common Files\Adobe\Installers\acce07fd2c8fe7f9e3f26243e626578\resources\scripts\
    Property(S): sessionID = acce07fd2c8fe7f9e3f26243e626578
    Property(S): ProductVersion = 2.0
    Property(S): Manufacturer = Adobe Systems Incorporated
    Property(S): ProductLanguage = 0
    Property(S): ProductCode = {14AFE241-FC6E-4FDB-BCA0-7AD6F4974171}
    Property(S): installLanguage = undefined
    Property(S): LanguageIndependent = 1
    Property(S): ALLUSERS = 1
    Property(S): overrideFile = 0
    Property(S): ARPSYSTEMCOMPONENT = 1
    Property(S): REBOOT = ReallySuppress
    Property(S): ExitWorkflow = 0
    Property(S): AddRemoveInfoDriverAdobeCode = {07CD1281-D5ED-4BB4-8964-7B4F1F36315D}
    Property(S): AddRemoveInfoDisplayName = Adobe Dreamweaver CS4
    Property(S): AddRemoveInfoDisplayVersion = 10.0
    Property(S): AddRemoveInfoPublisher = Adobe Systems Incorporated
    and after few more lines........
    Critical errors were found in setup
    TypeError:'undefined' is null or not an object
    Please see the Setup log file for details.
    I don't what's the problem. many people have this problem but they had not found the relevant thing in the log file. With this information provided please tell me what to do????

    Download the clean u script for CS 4 fro the Adobe site you have to search for it.
    Then try this, create a new user account and log in to this account and the try to install from there.
    Since this ihe Mac forum I assume yu are on a Mac so if that fdoes not work try a safe boot and then install.
    A Safe Boot is rebooting while holding down the shift key until you see the safe boot welcome screen.
    then try to install.
    Oops this is the illustrator forum cross platform sorry I do not know how to safe boot on the PC.

  • I can not publish my software I get "_An error occurred while signing: Failed to sign bin\Debug\app.publish\\setup.exe. SignTool Error: No certificates were found that met all the given criteria."

    Error 2
    An error occurred while signing: Failed to sign bin\Debug\app.publish\\setup.exe. SignTool Error: No certificates were found that met all the given criteria.
    Yesterday I could publish, today no code changes, but I get the above error.
    Help

    Hi El-sid,
    So glad that you have solved your issue, and thanks for your sharing.
    Have a nice day.
    Best Regards,
    Youjun Tang
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • What does this mean and how do I fix it: "The following warnings and errors were found during the validation of the current project:  - There appears to be a broken asset in your project. Correct this problem before burning this project."

    What does this mean and how do I fix it: "The following warnings and errors were found during the validation of the current project:  - There appears to be a broken asset in your project. Correct this problem before burning this project."

    It means that iDVD has found a problem with one of the movies added to the project.  Did you edit the movie after it had been added to the project.
    Create a new project and add your assets, movies, slides, etc. again and follow this workflow to help ensure the best quality video DVD:
    Once you have the project as you want it save it as a disk image via the  File ➙ Save as Disk Image  menu option.  This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • Why the modem deconncts frequently with this error message, "You were disconnected by the PPP server. Try reconnecting."? Please, help me out.

    Hello. I am using a ZTE 3G modem. Whenever I connect to internet, Sometimes during browsing or downloading it disconnects with the error message, "You were disconnected by the PPP server. Try reconnecting." There is no problem with the modem. Last few months, I have used it with Mac OS X Mavericks. There was no problem. Some days ago, I downgrade to Mac OS X 10.8.3, because I was fed up with different bugs in 10.9. Anyway, the first two days the connection were fine. But, after that, The problem began from no where. I tryed everything i could, but, It didn't help.
    Please, help me out. It's very disturbing frequanlty disconnection. I am mad at the PPP is like, if I found standing it in front of me, I would beat it with a bat, who gave this so called Mr. PPP permission to disconnect my connection as it's wish!

    Hi I'm having same issue since last week and now unable to reconnect. Not sure if it's an issue with the mobile company, modem or apple .
    Before was able to connect eventually now connects and drops connection after 3 seconds . Using macbookpro early 2014 mavericks all ipdate - modem 4G Huawei
    Haven't found any info to assist us
    Hope someone comes forward soon
    Thanks and good luck !

  • User tables belonging to the dbo schema were found in the database...

    Hi
    I´m running SAP on windows server 2003 R2 x64 sql 2005.
    I have installed a sandbox system based on NW 7.01 SR1 ECC 6.0. It´s only abap.
    After that I wanted to make a system copy of our production system to the the sandbox. So my sql colleague took a full backup of the production database and restored it into the sandbox.
    Now I´m trying to run the system copy installation sapinst - SAP ERP 6.0 EHP4 Ready (Support Release 1) - Sotware life Cycle Options - System Copy - MS SQL Server - Target System Installation - Central System - Based on AS ABAP - Central System...
    I choose custom and say it´s a Homogeneus System Copy (MS SQL Servver-specific)
    After that I choose "Use existing database" but the it say:
    *User tables belonging to the dbo schema were found in the database ES0. SOLUTION: You can only install an SAP system in a database with no user objects belonging to the system schema dbo. If there already is an SAP system in the database (MCOD), or you install a Java Add-In, you might have to convert the existing system to its own schema, or contact your SAP support.*
    I have searched the forums and can´t find anything I can use. I found someone wrote that I should change the control.xml file under sapinst directory:
    Proceed as follows:
    1. Stop SAPinst.
    2. Open the file control.xml in the sapinst log directory and look for the following lines:
    AllowNew: mig ? ?false? : ?true?,
    AllowDboObjects: mig ? ?true? : ?false?,
    3. Change these lines to
    AllowNew: ins ? ?true? : ?false?,
    AllowDboObjects: ins ? ?false? : ?true?,
    4. Save the control.xml, restart SAPinst and choose ?Continue old installation?.
    but it is not helping.
    Please advise me.
    If this is the wrong forum please tell which one is correct.
    Best regards
    Thomas
    Edited by: Thomas Aastrøm on Feb 23, 2012 3:49 PM

    Hi again
    Phase 11 is ok now. We changed the database owner to sap SIDadm.
    But now it fails at phase 12 (Move MS SQL Server objects from one schema to another)
    An error occurred while processing option SAP ERP 6.0 EHP4 Ready - Support Release 1 > Software Life-Cycle Options > System Copy > MS SQL Server > Target System Installation > Central System > Based on AS ABAP > Central System. You can now:
    Choose Retry to repeat the current step.
    Choose View Log to get more information about the error.
    Stop the option and continue with it later.
    Log files are written to C:\Program Files/sapinst_instdir/ERPEhP4/LM/COPY/MSS/SYSTEM/CENTRAL/AS-ABAP/.
    sapinst.log:
    INFO 2012-02-24 13:18:55.427
    Execute step MoveSchema of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSysCopy|ind|ind|ind|ind|10|0|MssSchemaMove|ind|ind|ind|ind|2|0
    ERROR 2012-02-24 13:18:56.349
    FCO-00011  The step MoveSchema with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSysCopy|ind|ind|ind|ind|10|0|MssSchemaMove|ind|ind|ind|ind|2|0|MoveSchema was executed with status ERROR .
    ERROR 2012-02-24 13:18:56.146
    MDB-05053  Errors when executing sql command: [Microsoft][ODBC SQL Server Driver][SQL Server]Object 'ep0.AFKO' does not exist or is not a valid object for this operation.
    <p> SOLUTION: If this message is displayed as a warning, you can ignore it. If this is an error, contact SAP support.</p>
    INFO 2012-02-24 13:19:02.583
    An error occured and the user decided to retry the current step: "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSysCopy|ind|ind|ind|ind|10|0|MssSchemaMove|ind|ind|ind|ind|2|0|MoveSchema".
    ERROR 2012-02-24 13:19:02.770
    FCO-00011  The step MoveSchema with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSysCopy|ind|ind|ind|ind|10|0|MssSchemaMove|ind|ind|ind|ind|2|0|MoveSchema was executed with status ERROR .
    What to do?
    Best Regards
    Thomas

  • No Dimension Server entry was found in the EPM registry

    I have installed 11.1.2.3 on Linux 64bit.
    I can log into the EPMA workspace but not able to open the calculation manager. And when I try to open it I get this error:
    No Dimension Server entry was found in the EPM registry.
    Please ADVISE. Thanks.

    Avishek wrote:
    I have installed 11.1.2.3 on Linux 64bit.
    I can log into the EPMA workspace but not able to open the calculation manager. And when I try to open it I get this error:
    No Dimension Server entry was found in the EPM registry.
    Please ADVISE. Thanks.
    Have we not been here before and you asked similar questions?
    https://forums.oracle.com/thread/2482930
    https://forums.oracle.com/thread/2473594
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • CHANGE ASSISTANT : Failed.   No Environments were found in the Environment

    Hi all,
    Iam trying to apply MP5 on HRMS 9.1 peopletools 8.52 in change assistant getting error as
    *(Step 5) Discovering Hub Environments.*
    Failed.   No Environments were found in the Environment Management Hub.
    Note: All agents should be running and sending pulses for all Application,
    Batch, File and Web Servers for the environment before Change Assistant is started.
    *(Step 6) Pinging Metalink*
    Failed.
    *(Step 7) Pinging Update Gateway*
    Failed.
    *[Mon Dec 10 20:04:29 IST 2012] End Validation*
    Unsuccessful completion (3 Steps Failed).  Click on View Log to see additional messages.
    I have set crawl path correctly, ping is working fine , hub url is also showing agent , change asiistant RUNNING
    pls help
    thanx
    Arvind

    this is what the log file shows...
    unable to find help with the post you hav directed Hakan.....
    Help me...
    [Tue Dec 11 12:02:53 IST 2012] Begin Validation
    output written to: C:\Program Files\PeopleSoft\Change Assistant\validate\validate_2012_12_11_12_2.log
    (Step 1) Creating a Summary of Your Environment
    PS_HOME: F:\PS_HOME\
    Output Directory: D:\change_assistant\output\
    Staging Directory: D:\change_assistant\staging\
    Path: C:\Program Files\PeopleSoft\Change Assistant\jre\bin;.;C:\Windows\Sun\Java\bin;C:\Windows\system32;C:\Windows;F:\PS_HOME\bin\client\winx86;C:\Program Files\PeopleSoft\Change Impact Analyzer\dll;D:\ORACLE\product\11.2.0\dbhome_1\bin;F:\ORACLE\product\11.2.0\dbhome_1\bin;F:\app\299025\product\11.2.0\dbhome_1\bin;D:\apps\299025\product\11.2.0\dbhome_1\bin;D:\app\299025\product\11.2.0\dbhome_1\bin;D:\Oracle_Home\product\11.2.0\dbhome_1\bin;C:\Program Files\CA\SC\CAWIN\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Intel\DMIX;C:\PROGRA~1\CA\SC\CAM\bin;C:\Program Files\CA\DSM\bin;C:\Program Files\TortoiseSVN\bin;F:\BEA_HOME\TUXEDO\tuxedo10gR3_VS2008\bin;F:\BEA_HOME\TUXEDO\tuxedo10gR3_VS2008\jre\bin\server;F:\BEA_HOME\TUXEDO\tuxedo10gR3_VS2008\jre\bin
    CLASSPATH: C:\Program Files\PeopleSoft\Change Assistant\changeassistant.jar;C:\Program Files\PeopleSoft\Change Assistant\mx4j-jmx.jar;C:\Program Files\PeopleSoft\Change Assistant\xercesImpl.jar;C:\Program Files\PeopleSoft\Change Assistant\xml-apis.jar;C:\Program Files\PeopleSoft\Change Assistant\xalan_2_7_0.jar;C:\Program Files\PeopleSoft\Change Assistant\serializer.jar;C:\Program Files\PeopleSoft\Change Assistant\commons-logging-1.0.1.jar;C:\Program Files\PeopleSoft\Change Assistant\commons-httpclient-3.1.jar;C:\Program Files\PeopleSoft\Change Assistant\commons-net-ftp-2.0.jar;C:\Program Files\PeopleSoft\Change Assistant\commons-codec-1.2.jar;C:\Program Files\PeopleSoft\Change Assistant\xmldb-api-20021118.jar;C:\Program Files\PeopleSoft\Change Assistant\xmldb-common.jar;C:\Program Files\PeopleSoft\Change Assistant\xmldb-xupdate-20040205.jar;C:\Program Files\PeopleSoft\Change Assistant\xindice-1.1b5-dev.jar;C:\Program Files\PeopleSoft\Change Assistant\psemf.jar;C:\Program Files\PeopleSoft\Change Assistant\psjoa.jar;C:\Program Files\PeopleSoft\Change Assistant\AbsoluteLayout.jar;C:\Program Files\PeopleSoft\Change Assistant\log4j-1.2.8.jar;C:\Program Files\PeopleSoft\Change Assistant\jxl.jar;C:\Program Files\PeopleSoft\Change Assistant\commons-io-1.4.jar;C:\Program Files\PeopleSoft\Change Assistant\jewt4.jar;C:\Program Files\PeopleSoft\Change Assistant\share.jar;C:\Program Files\PeopleSoft\Change Assistant\j2ee.jar
    Current Working Directory: C:\Program Files\PeopleSoft\Change Assistant
    Done.
    (Step 2) Validating your SQL Query Tools
    Found Oracle SQL Query Tool at d:\miscc\Oracle_Home\product\11.2.0\dbhome_1\bin\sqlplus.exe
    Done. 1 SQL Query Tool found.
    (Step 3) Pinging Environment Management Hub
    Pinging 172.17.108.118
    thanx
    Arvind.

  • Error: This entry already exists in the following tables "(ALR2)(ODBC -2035

    Dear Expert,
    I can not prepare Sales Order and Purchase Order in SAP B1-2007 SP 1(Both Documents Having on Approval ), due to following system error.
    System Error:
    This entry already exists in the following tables "(ALR2)(ODBC -2035) [Message 131-183]
    Kindly check it and provided me solution.

    Hi,
    Check This
    This Entry already in following tables "AIT1) (ODBC-2035) [message 131-183]
    Regards
    Deepak Tyagi

Maybe you are looking for