ERROR: NO_GUEST: Guest login not allowed from client startup

we are getting the following error with express 6.3.4 when connectting to the express server from Objects using a connection editor.
The error message is
Error #12150 in XPCUBE: Non-fatal (0300): Data Manager is unable to generate transmission.
Error #10300 in XDMRESP: Non-fatal (0300): ERROR: NO_GUEST: Guest login not allowed from client startup
Encountered similar error while calling from OLAP web application.
In stored procedure XWD_RAMSTARTUP: The following Express
Server error occurred: NO_GUEST: Guest login not allowed from
client startup
Which I believe is the same reason.
Can you pls suggest what could be the problem and how can we over come this.

In the Connection Editor, under "Relational Data-> Settings" did you check the "Personal Configuration" box?
If you did, you should ensure the Authentication type is not set to "None".

Similar Messages

  • Error in DTP load from PSA to IC - Error - Key figure 0 not allowed for

    HI ALL,
    ERROR - Key figure <> 0 not allowed for unit ' '; see long text
    Diagnosis
        The unit/currency ' Source unit MEIN ' with the value 'space' is
        assigned to the key figure ' Source Key Fig. DIFF ' with the value '
        4240.000- '.
    System Response
        A key figure that is not equal to 0 and for which no unit/currency is
        set has an inconsistent data state. The data record is not processed.
    Procedure
        Correct the source data.
    Procedure for System Administration
    Please guide
    BR
    Prasad

    Hi ,
    First af all identify all such records by creating an error DTP so that the same can be collected in Error stack .
    1. Go to the Update tab of the normal DTP and there you can find the create Error DTP option .Click on that .
    2. This will take you to the Error DTP screen .Use the option 'Valid record updated reporting possible (request green).You can increase the number of errorneous records to be avoided there only .
    3. Please make sure you have activated the option of ' Valid records update reporting possible request green ' both in the Normal and Error DTP .Also the number of errorneous records to be avoided to be mentioned in both the DTP's.
    4. Activate the DTP's (Both Normal and Error) .
    After this can you please run the Normal DTP again .You can check the Error stack to see the errorneous records .When you double click on any record in the error stack it will thrown an error message from where you can find the exact error with those records .You can rectify these records in the errror stack and then run the error DTP to update the same to the data target.
    Ideally these records should be rectified in the Source system .
    Thanks
    Kamal

  • MySQL Connection - Select Database - HTTP Error Code 405 Method Not Allowed?

    We've set up a MySQL database with our host and can connect to that, and create, edit, delete tables using HeidiSQL, without a problem.
    However when we attempt to set up the connection in the Databases tab of our Applications panel in Dreamweaver we receive the following error:
    HTTP Error Code 405 Method Not Allowed
    We have entered the following in the MySQL Connection box:
    Name: <name of our connection>
    Server: <IP address of our database>
    Username: <our database username>
    Password: <our database password>
    Database:
    When we click the "Select" option next to the Database field, that's when we receive the above mentioned error.
    We noticed that there was a fix posted by Adobe at:
    http://www.macromedia.com/support/dreamweaver/ts/documents/err405.htm
    ...but that link is long since dead, however it does seem to indicate that Adobe are/were aware of this issue.
    Can anyone help?  We're trying to move from Classic ASP / MSSQL to PHP / MySQL but have hit a barrier right from the off, which isn't very encouraging.  Hope someone can ease our concerns with PHP and MySQL.
    Much appreciated.
    NJ

    Thank you SnakEyez02.
    I had the Testing Server set to Local/Network but didn't have MySQL installed locally.  Changed that setting to FTP and it picked up on the database correctly.
    When using MSSQL it doesn't matter whether you choose Local/Network or FTP it just picks up the online database regardless.  I guess this must just be a difference between it and MySQL.
    Thanks for the advice.  Much appreciated.
    NJ

  • Error Item Category 04000 not allowed in accounting transaction 0300/0001

    When we are posting a Incoming payment document with debit to -bank charges refund and bank account ,got the error Item Category 04000 not allowed in accounting transaction 0300/0001.
    Please advice.
    Edited by: mysap query on Feb 24, 2009 2:56 AM

    Hi
    This issue is related to document splitting.  Unfortunately I don't have access to an ECC6 system today so can't give you the specific solution, however you need to check the config settings in the following path:
    IMG > Financial Accounting (New) > General Ledger Accounting (New) > Business Transactions > Document Splitting > Classify Document Types for Document Splitting
    If you are unable to resolve this, you should ask for assistance from a FI consultant.
    Regards
    Kylie

  • Help - error : ORA-00984: Column not allowed here

    Hi,
    I'm writing a simple Java program to update values into Oracle tables. But getting error - 'ORA-00984: Column not allowed here' in the line - sql2.executeUpdate(acctTabSql);
    There is no column name used in 'insert statement - and referred suggestion here to resolve the error, but couldn't. Please write me how to resolve it. ?
    Here is the code snippet below.
    Thanks, Vasu
    T_ACCT
    ACCT_ID (PK) GEN INTEGER
    ALS_NBR:STRING
    STATUS_CD:STRING
    NOTE_DT:DATE
    int intVal1 = 0;
              int intVal2 = 0;
              Statement sql1 = oraConnection.createStatement();
              ResultSet rs = sql1.executeQuery("SELECT ACCT_ID_SEQ.NEXTVAL, APPL_ID_SEQ.NEXTVAL FROM DUAL");
              while(rs.next()){
              intVal1 = rs.getInt(1);
              intVal2 = rs.getInt(2);
              System.out.println("ACCT_ID :" + intVal1);
              System.out.println("APPL_ID :" + intVal2);
              sql1.close();
              Statement sql2 = oraConnection.createStatement();
              String acctTabSql = "INSERT INTO VPDBO.T_ACCT (ACCT_ID, ALS_NBR, NOTE_DT, HELMS_NBR, SL_REF_NBR, BK_MSG_RECEIVED_DT) " +
                        "VALUES (intVal1,'' ,'' ,'' ,'' ,'' )";
              System.out.println(acctTabSql);
    -/Error/-     sql2.executeUpdate(acctTabSql);
              sql2.close();
              Statement sql3 = oraConnection.createStatement();
              String applTabSql = "INSERT INTO T_APPL (APPL_ID, ACAPS_ID, STATUS_CD, ACAPS_PROD_CD, ACCT_ID, DCAPP_MSG_RECEIVED_DT) " +
                        "VALUES (intVal1, valappIdValue, 'EN', '', intVal2, '08/26/09')";
              System.out.println(applTabSql);
              sql3.executeUpdate(applTabSql);
              sql3.close();
              oraConnection.commit();

    Hi,
    make sure final statement is like :
    INSERT INTO VPDBO.T_ACCT (ACCT_ID, ALS_NBR, NOTE_DT, HELMS_NBR, SL_REF_NBR, BK_MSG_RECEIVED_DT)
    VALUES(intVal1,NULL,NULL,NULL,NULL,NULL)instead of
    String acctTabSql = "INSERT INTO VPDBO.T_ACCT (ACCT_ID, ALS_NBR, NOTE_DT, HELMS_NBR, SL_REF_NBR, BK_MSG_RECEIVED_DT) " +
    "VALUES (intVal1,'' ,'' ,'' ,'' ,'' )";Cheers,
    Avin ash

  • Reg : "Error multiple Receivers are not allowed for Synchronous calls"

    Hi All,
    Can somebody tell me why I am getting this error "Error multiple Receivers are not allowed for Synchronous calls" when I am using Synchronous Soap Request to WebService and the response from webservice is being sent to multiple receivers which are Business services based on Receiver determination condition(Services W/o Party).

    Hi , If you are simply looking up data (and not updating tables ) using RFC you can use RFC Lookup APIs to create a java mapping
    The source message has to be a RFC request message interface and target should be RFC response message interface.
    Also you can use three step mappings in a single interface mapping.
    1. from your request message to RFC request message mapping
    2. java mapping which will do the lookup and give you rfc response back
    3.rfc response to your target response mapping.
    PS: RFC lookup can be used if there are not may hierarchy in the RFC Response structure. (i.e. may be 3 or 4 level nesting permitted)
    To help you further
    The following is a link which gives you access to a ready made source code. you just need to compile it and create a jar and import the mapping in imported archive
    http://knowhowsapxi.synthasite.com/rfc-loolup.php
    Edited by: Progirl Progirl on Oct 31, 2008 1:33 PM

  • Error: Admin users are not allowed to have override security

    In shared services, I provisioned the users FDM "Provision Manager" access. When I log on to FDM application, I see all those users have administrator privileges. When I tried to change the security level, it is throwing an error
    Error: Admin users are not allowed to have override security
    How can I create users who are not as admin in FDM? The user guide dont seem to help me much in this regards.

    All you need to do is make sure there role is set to an Intermedate role 1-9 and not Administrator. I would suggest you do the following.
    1) Log into FDM as the main admin user.
    2) Go to user maintenance and delete all users who are not meant to have adminstarator access but can still access everything like admins.
    3) Go into Shared Services and check that these users are provisioned for FDM with one of the Intermediate roles only.
    4) Once confirmed re-add these users back in the FDM user maintenance screen by selecting them from the new user dropdown and give them the appropraite location access.
    5) Log off FDM as the admin user.
    6) Log in as the intermedaite user and tes tthe access

  • I am trying to update my software through the app store but for some reason an error occurs and will not allow me to do so

    I am trying to update my software through the app store but for some reason an error occurs and will not allow me to do so. And when i go online to log into my apple id account it states that there is an error. Can someone help me solve this issue, its annoying me?

    Apple’s having trouble with the iTunes Store servers right now. Wait for them to resolve the issue.
    (123935)

  • In MIRO screen, if clicked on 'TAX' tab  error 'Entry of tax not allowed in

    Hi,
    In MIRO screen, if clicked on 'TAX' tab  error 'Entry of tax not allowed in current account line' is displayed. Message number FF847. What may be the reason for this error message?
    Entry of tax not allowed in current account line
    Message no. FF847
    Diagnosis
    If you enter a tax amount in the current account line, the system does not allocate the amount to one tax code, but instead to all tax codes that exist in the document. In this case, the amount needs to be split up using the rule-of-three procedure. The sum of the computed taxes of all tax codes is used as the comparison basis. If each of the computed tax amounts of all tax codes equals zero, the system uses the sum of the tax base values as the comparison basis.
    System Response
    If the respective comparison basis equals zero, the system issues an error message.
    Procedure
    Go to the tax screen or tax tab page and enter the appropriate tax amounts for each tax code.

    Hi,
    Please check SAP Note- 1551857  for the same.
    Other terms
    FF707, FF716, FF796, FF847, FB70, SAPLTAX1
    Reason and Prerequisites
    There is a program error.
    Solution
    Implement the program corrections.
    When you choose "Cancel" on the tax screen during posting or simulation, the system returns to FB60 or MIRO again.
    The message FF 847 on the "Basic data" tab page is suppressed for company codes with jurisdiction codes if no expense items exist.
    Hope this will resolve your query.
    Regards,
    Sandesh Sawant

  • Idoc Error-Price without service not allowed

    Hi Experts,
    I have a Service PO with Acc.***. P .One service item entered in PO with price.When I go via ME22n & change the Price of Service item under services tab,its fine.
    When this is done via Idoc generation(Msg.Type PORDCH) using standard FM BAPI_IDOC_INPUT1, it creates another service line item for the new price.
    The first line item cannot be deleted via IDOC posting.Gives error "Price without service not allowed"
    This is quite Urgent.Immediate reply is highly appreciable.
    Regards,
    Jagan

    Hi,
    Check in WE42, for the process code, you have assigned this function module and given the correct process code in the partner profile.
    Sujay

  • When trying to make purchase I am asked to improve apple security by setting up 3 questions.  I have tried many times with out success.  Apple always returns an error without identifying what the error is.  Will not allow me to advance without setting up

    Apple is requiring the establishment of 3 security question (increase online security), but coninuously gives an error without identifying the error.  I am not allow to proceed or bypass and cannot use any apple store features.

    Exactly when does this error occur?  What is the exact wording?

  • SMP 3.0 with SP3 AgentryApp is not Connecting from Client : Communications error (14)

    Hello,
    In SMP 3.0 : Version 3.0.2, SP Level:02, my Agentry App : Work Manger 6.0 is working fine, it is running from device and running properly. After i migrate my SMP3.0 from SP02 To SP03, it is not connection from Any Device,(it is not showing any Error in Log file, Means App deployed successfully.) whenever we try to connect from Any device it is showing following Error Message.
    Requesting Public Key from Server
    Communications error (14)
    Connection failed
    Ending transmission
    ??? :  Is there any other confugration need to do in SMP 3.0 : SP03???? please help on this Issue...
    Thanks
    Krishna

    Hello Steve,
    i go through the SAP Note 2008882. based on that Note i run the following
    command.
    C:\windows\Microsoft.NET\Framework\v4.0.30319\aspnet_regiis.exe -pa
    "C:\SAP\MobilePlatform3\Server\configuration\com.sap.mobile.platform.serv
    er.agentry" smpServiceUser.
    Now that Error is Gone from Log file but still it is not allowing to
    connect. Even from ATE also.
    Event Log File :
    06/19/2014 17:54:00, 0,         0,         0, Thr       3192, New files opened events.log, messages.log
    06/19/2014 17:54:00, 0,         0,         2, Thr       3192, Loading the Agentry Runtime's public/private key for password exchanges.
    06/19/2014 17:54:01, 0,         0,         2, Thr       3192, Upgraded the Agentry key pair from pre-SP03 format
    06/19/2014 17:54:01, 0,         0,         2, Thr       3192, Key pair loaded successfully.
    06/19/2014 17:54:01, 0,         0,         2, Thr       3192, Agentry Startup
    06/19/2014 17:54:01, 0,        17,        14, Thr       3192, WebSockets Front End v7.0.3.205
    06/19/2014 17:54:01, 0,         1,         4, Thr       3192, Agentry Server Agent v7.0.3.205
    06/19/2014 17:54:01, 0,        20,       150, Thr       1656, Loading Development application definitions
    06/19/2014 17:54:07, 0,        24,         4, Thr       1656, Loaded HTTPXML-HTTPXMLSystemConnection (HTTPXML v7.0.3.205) from ag3httpxmlbe.dll
    06/19/2014 17:54:07, 1,         3,         9, Thr       1656, Java-1, Chickaming Java, initialHeapSize, File: , ..\agentry\SystemLogger.cpp#792:DTLoggerHandler::badKey
    06/19/2014 17:54:07, 1,         3,         9, Thr       1656, Java-1, Chickaming Java, maxHeapSize, File: , ..\agentry\SystemLogger.cpp#792:DTLoggerHandler::badKey
    06/19/2014 17:54:07, 1,         3,         9, Thr       1656, Java-1, Chickaming Java, reduceOSSignalUse, File: , ..\agentry\SystemLogger.cpp#792:DTLoggerHandler::badKey
    06/19/2014 17:54:07, 1,         3,         9, Thr       1656, Java-1, Chickaming Java, nonStandardJavaOptions, File: , ..\agentry\SystemLogger.cpp#792:DTLoggerHandler::badKey
    06/19/2014 17:54:20, 0,        23,         4, Thr       1656, Loaded Java Back End (Java v7.0.3.205) from ag3javabe.dll
    06/19/2014 17:54:20, 0,        20,       152, Thr       1656, Loading Development application definitions for default localization
    06/19/2014 17:54:20, 0,        20,       153, Thr       1656, Finished loading Development application definitions for default localization
    06/19/2014 17:54:20, 0,        20,       151, Thr       1656, Finished loading Development application definitions
    06/19/2014 17:54:21, 0,        20,         4, Thr       3192, Server v7.0.3.205
    06/19/2014 17:54:21, 0,        17,        10, Thr       3192, WebSockets Front End v7.0.3.205
    06/19/2014 17:54:21, 0,         0,         0, Thr       3192, Old log files moved into C:\SAP\MobilePlatform3\Server\log\agentry\rolled\2014-06-19-175400
    06/19/2014 17:54:21, 0,         0,        23, Thr       3192, Agentry startup is complete.
    Thanks
    Krishna

  • Error BEA-000000 Error while invoking endpoint ... from client

    Hi, when I start the Weblogic Admin Server for server domain, there appears the below warning:
    <27-nov-2013 13H37' CET> <Error> <oracle.webservices.jaxws> <BEA-000000> <Error while invoking endpoint "http://localhost:7011/ws/admin" from client>
    Wls: 10.3.6
    JEE: 7u40
    Windows x64
    How can I solve this error? this is a real error that affects the operations of the weblogic server for server domain? or should I ignore it?
    tnx

    Hi Julia,
    I am usign Endeca Server 7.6.0, I have not installed anything in version 7.5.x. This error is showed after the server state message <RUNNING> is displayed.
    My steps:
    1. Start Weblogic Server
    2. Start Weblogic studio
    <27-nov-2013 18H25' CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
    <27-nov-2013 18H25' CET> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    <27-nov-2013 18H25' CET> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
    (this message is also displayed in window where I start studio domain)
    <27-nov-2013 18H26' CET> <Warning> <oracle.wsm.resources.policyaccess> <WSM-06210> <No habÝa disponible una instancia del bean interface oracle.wsm.policymanager.IUsageTracker para el repositorio local en la ruta de acceso "", con el fin de configurar el acceso del repositorio oracle.wsm.policymanager.accessor.BeanAccessor para el contexto "ResourcePattern [pattern=DOMAIN/weblogic/endeca_server_domain, subjectType=MANAGED_DOMAIN, terms={PLATFORM=weblogic, SUBJECT_TYPE=MANAGED_DOMAIN, DOMAIN=endeca_server_domain}]".>
    <27-nov-2013 18H26' CET> <Warning> <oracle.wsm.resources.policyaccess> <WSM-06210> <No habÝa disponible una instancia del bean interface oracle.wsm.policymanager.IDocumentManager para el repositorio local en la ruta de acceso "", con el fin de configurar el acceso del repositorio oracle.wsm.policymanager.accessor.BeanAccessor para el contexto "ResourcePattern [pattern=DOMAIN/weblogic/endeca_server_domain, subjectType=MANAGED_DOMAIN, terms={PLATFORM=weblogic, SUBJECT_TYPE=MANAGED_DOMAIN, DOMAIN=endeca_server_domain}]".>
    ... (this message is repeated 9 times)
    <27-nov-2013 18H26' CET> <Error> <oracle.webservices.jaxws> <BEA-000000> <Error while invoking endpoint "http://localhost:7011/ws/admin" from client>
    <27-nov-2013 18H27' CET> <Error> <oracle.webservices.jaxws> <BEA-000000> <Error while invoking endpoint "http://localhost:7011/ws/admin" from client>
    <27-nov-2013 18H27' CET> <Error> <oracle.webservices.jaxws> <BEA-000000> <Error while invoking endpoint "http://localhost:7011/ws/admin" from client>
    <27-nov-2013 18H27' CET> <Error> <oracle.webservices.jaxws> <BEA-000000> <Error while invoking endpoint "http://localhost:7011/ws/admin" from client>
    <27-nov-2013 18H27' CET> <Error> <oracle.webservices.jaxws> <BEA-000000> <Error while invoking endpoint "http://localhost:7011/ws/admin" from client>
    <27-nov-2013 18H27' CET> <Error> <oracle.webservices.jaxws> <BEA-000000> <Error while invoking endpoint "http://localhost:7011/ws/admin" from client>
    <27-nov-2013 18H27' CET> <Warning> <oracle.wsm.resources.policyaccess> <WSM-06210> <No habÝa disponible una instancia del bean interface oracle.wsm.policymanager.IUsageTracker para el repositorio local en la ruta de acceso "", con el fin de configurar el acceso del repositorio oracle.wsm.policymanager.accessor.BeanAccessor para el contexto "ResourcePattern [pattern=DOMAIN/weblogic/endeca_server_domain, subjectType=MANAGED_DOMAIN, terms={PLATFORM=weblogic, SUBJECT_TYPE=MANAGED_DOMAIN, DOMAIN=endeca_server_domain}]".>
    ... (this message is repeated 4 times)
    <27-nov-2013 18H27' CET> <Error> <oracle.webservices.jaxws> <BEA-000000> <Error while invoking endpoint "http://localhost:7011/ws/admin" from client>
    <27-nov-2013 18H28' CET> <Error> <oracle.webservices.jaxws> <BEA-000000> <Error while invoking endpoint "http://localhost:7011/ws/admin" from client>

  • Error : RFC Partner does not allow to start the Program.

    Hello Guys,
         I have a requirement where in  BAPI_DOCUMENT_CHECKOUTVIEW2  need to be  called from the front end (JAVA).
         When i run this BAPI in SAP it works fine ,when i run the same form front end it throws the error saying
              "RFC Partner does not allow to start the Program."( I have checked the error in debug mode).
             SAPGUI is installed at the JAVA developers desktop,still am facing this error.
            The error is thrown at the below code:
                      CALL FUNCTION 'RFC_PING'
                                                    DESTINATION 'SAPGUI'
                     EXCEPTIONS: communication_failure = 1 MESSAGE lf_msg_text
                                                  system_failure        = 2 MESSAGE lf_msg_text.
    Please suggest.
    Regards,
    Najam

    HI,
    You need a RFC path in this case.You can check SM59 and contact your basis team regarding this.

  • Error in COR1 - Material not allowed to use

    Hi,
    Material is in the stock "unrestricted use " but does not allow to use in a production process order. All related options are verified for example : MB51, MMBE, Date of production is prior to use, Quality is OK, Not in blocked stock, not reserved for some other order, same material was in use from same batch till 02.06.09 suddenly since 03.06.09 a error pops up during batch determination during creating a " Process Order " through COR1.
    Regards,
    Suresh

    Check the Cross plant Material status in Basic data and plant specific status in MRp1 in the material master.
    look for material master changes
    Regards
    Ratan
    Edited by: Ratan on Jun 22, 2009 4:17 PM

Maybe you are looking for