ERROR : No item category exists (Table T184L LB VERP  )

There is a error log "No item category exists (Table T184L LB VERP  ) " when i try to create outbound delivery to subcontractor vendor via TCode ME2O.
I already add item category LB VERP via TCode 0184, but it still error.
Could anyone help me please
Thanks & Best Regards,
Saiful arif

Hi Arif,
Did you define delivery item category for LB VERP record in transaction 0184?
Regards,
Csaba
Edited by: Csaba Szommer on Oct 28, 2008 10:32 AM

Similar Messages

  • Error :Inbound Delivery "No item category exists (Table T184L DIG NORM V )"

    Dear Guru's,
    When I try to create an inbound Delivery for an SA i am getting the following error "No item category exists (Table T184L DIG NORM V )" . My problem is, it suppose to look for Delivery Type: EL instead of DIG. I dont know why its look for DIG, can some one point where i am making the mistake?
    I am sure that i should be looking for Delivery Type : EL and Item Category : ELN (for Delivery)
    Please advice...
    Regards,
    Kumar

    Dear Kumar ,
    Please check the itemcategory determination for the delivery type DIG in 0184 transaction for combination.
    Delivert type+Norm -
    >Itemcategory
    For Example :- DIG + NORM---->DIGN
    I hope this will help you,
    Regards,
    Murali.

  • Error while creating I/B delivery: No item category exists (Table T184L EL)

    Hello all,
    When I save output type "SPED" in outbound delivery, Inbound delivery automatically gets created.
    But in this case error occured:
    "No item category exists (Table T184L EL NLAG V )"
    1. Specified material is HALB.
    2. Item Cat in MMR is NORM
    3. in Table T184 for "Delivery item Category Determination", configuration for EL NLAG V is NOT exists. But EL NORM V is exists
    4. Testing for the SAME material in Test server is PERFECT. I/B delivery created automatically. Master data in Test system is replica of Production system.
    Then where is the wrong....????
    Could any one help on this?
    Thanks
    Tushar

    Please have a look at your material. In material master there's a so called item category group (MARA-MTPOS_MARA and MVKE-MTPOS; these are on sales 2 view).
    Please compare the value in this field in the materials used in test (NORM?) and production system (NLAG?).
    This is one factor in item category determination as you can see in table T184L.
    Edited by: Csaba Szommer on Jul 19, 2010 2:18 PM

  • Error in GR(No item category exists (Table T184L HID  V ))

    Hi,
    While doing GR for stock material the below error appears
    No item category exists (Table T184L HID  V )
    Please help.
    Urgent.
    Points will be rewarded.
    Regards

    Hi,
    Sales View not there for the Material.
    Material Type is HIBE.
    While posting MIGO,below before saving 'DELIVERY BEING PREPARED' appears then the above error appears.
    Please reply.
    Regards

  • No item category exists (Table T184L HID  V )

    HI ALL
    GETTING THIS ERROR WHEN CARRYING OUT MIGO FOR INBOUND DELIVERY.
    PLEASE GUIDE
    REGARDS
    REDDY

    Dear Thaman,
    Kindly go through the following links
    Error in GR(No item category exists (Table T184L HID V ))
    http://sap.ittoolbox.com/groups/technical-functional/sap-log-mm/error-while-posting-gr-933507
    hpoe it will help..
    Rgds,
    Kareena
    Edited by: Kareena Kapoor on Apr 14, 2010 2:08 PM

  • No item category exists (Table T184L HOD V)

    Hi,
    When I'm trying to reverse a goods receipt for a PO I'm getting the error as follows.
    No item category exists (Table T184L HOD V)
    Message no. VL320
    Diagnosis
    There is no item category available in item category determination in the delivery (table T184L) for the following entries: HOD  V
    System Response
    The system does not allow further processing of this item.
    Procedure
    Specify the appropriate item category for the above mentioned entries or inform your system administrator.
    This is a WM and HU managed scenario. Please advise how to overcome the error
    Regards,
    Ashwin

    You are receipting goods through inbound delivery right ?.Please maintain below missing configuraion against your delivery type.
    SPRO>Logistics Execution>Shipping>Deliveries>Define Item Category Determination in Deliveries.
    Maintain  here  HOD V then you can do receipt.

  • Error while doing GR 561 - No item category exists (Table T184L DIG WMPP  )

    Hi,
    I am doing 561 to Finished goods St loc which is WM enabled and getting the above error.
    Question - I don't have authorization to check or change the item category. How do I receive goods to this St loc? I tried transfering stock from another location, but system does not allow that as well.
    While doing 561, system creates an inbound delivery in the background. At that time it checks for item category and fails.
    Any way I can post stock to this st loc?

    561 movment is only to be used for stock load at GO-Live date, not beyond, as its offset account is  usually  an account that is specially defined for initial inventory postings.
    Can it be that you are using decentralized WM (because of the inbound delivery) ?
    Without customizing you are not able to sove that problem, except you are using movement types that are allowed and setup well.
    Maybe you should explain why you think that you need to add stock with 561´

  • In MIGO  I have error."No Item Catagory exists Table T184L HID NORM V)

    Hi
    Stuck in MIGO , Po created with and  while processing MIGO I am getting the following error."No Item Catagory exists Table T184L HID NORM V)
    I am using Retail , maintained Item catagory group but still I am facing with this error ..

    Resolved the issue with  0184

  • While processing MIGO  "No Item Catagory exists Table T184L HID NORM V"

    Hi
    Stuck in MIGO , Po created with and  while processing MIGO I am getting the following error."No Item Catagory exists Table T184L HID NORM V)
    I am using Retail , maintained Item catagory group but still I am facing with this error ..

    Issue Solved with T Code 0184
    Edited by: SHESAGIRI.G on May 10, 2008 2:56 AM

  • Sales order BAPI giving error - No item category available (Table T184 ...

    I am trying to create a sales order from a portal application using BAPI_SALESORDER_CREATEFROMDAT2. For certain type of materials, an error message is coming like: 
    No item category available (Table T184 ZOR NORM PSA1 ZSME) ZOR
    Error
    in VBAPKOM 000020 VBAPKOM
    Item 000030 does not exist 000030
    Sales
    document was not changed
    I have checked in vov4 and consulted SD consultant. The vov4 settings are set as below and our SD consultant says they are ok and need not be changed, as when we are creating this order in SAP, it is a success.
    ZOR NORM PSA1 ZSME
    ZOR NORM PSA2 ZSME ZSHP
    ZOR NORM PSHP ZTAX
    Now, the standard code where this error is coming is calling a function module "RV_VBAP_PSTYV_DETERMINE" which checks for the higher level item category. The material at item 10 meets the criteria, but material at item 20 fails as PSA1 does not have any such row (above) indicating higher level iteam.
    Interesting thing is when I try to create the order in SAP with these materials, it creates the order. There is also a material substitution rule in place, which also seems to be working fine.
    Debugging the standard code has not yet given any result.

    Since you had indicated the VOV4 settings, I presume, the item category ZSME is maintained under the tab "DfItC".
    On your comments,
    For certain type of materials, an error message is coming like:
    I feel, the root cause of the issue is Item Category Group in material master.  Check for those which creates an issue with the one which is running successfully.
    thanks
    G. Lakshmipathi

  • I am trying to install iTunes 12.0 on my Windows 7 PC to sync my iPhone6. I am getting error message, "Item already exists" on installation of iTunes 12.0.  Apple has no fix. Help???

    I am trying to install iTunes 12.0 on my Windows 7 PC to sync my iPhone6. I am getting error message, "Item already exists" on installation of iTunes 12.0.  Apple has no fix. Help???

    Item or object?
    For "Object already exists" or "Access denied" errors when installing try opening Control Panel > Programs and Features > View installed updates then checking for Security Update for Microsoft Windows (KB2918614). Uninstall if you have it, then reboot and try installing again.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Error popups Item category to be assigned

    Hello Sir/madam
    "There is no item category assigned to account to the specified company code" , if a pop up , message comes like this , what the way to sortout, such error, have assigned in charted occount, in F-02 after updating, amount, once try to save, this type of error is given,
    Been to spro and did document spliting,-activate document splitting, but, again error is coming, and the trasaction is not accepted.
    thanking you,
    warm regards

    Hi
    Please give in document splitting accounting which you are using in for posting in f-02 and give category save.  Then go to f-02 please check.
    Regards
    Ramesh

  • Error in Item Category Determination

    Hai,
    When I am trying to define the Item category determination for the quotation type I get the following error message
    "only quotation items can be assigned to package transaction types"
    Can you please let me know the reason for the error
    Thanks,
    Vijay

    I was able to resolve it.

  • Batch split error message: Item category not defined

    Hi gurus,
    I'm trying to use the batch split in an inbound delivery but I get the error message of the subject of this thread while saving.
    Could you bring some light here please?
    Many thanks,
    Marc

    Issue found.

  • Material and item category error in inbound delivery through IDOC

    Hi,
    When processing inbound delivery through idoc from we19, iam getting 2 errors:
    1. Enter a material or an item category,
    2. No item category exists (Table T184L EL ZCBN V )
    can some please let me know how to solve this error.
    Thanks,
    Kashif

    Hi Kashif,
    You have to enter Material number in the sub-segment of E1EDP01 segment in WE19 transaction.
    Rgds,
    Kumar

Maybe you are looking for

  • How do I print monthly calendars in iCal 5 with location?

    Hello, Our office uses iCal to manage our schedule. I cannot get a monthly printout from iCal that displays location information i.e. information entered as location on iCal. Previously on our windows machines we had to use Outlook Calendar Assistant

  • RoboHelp 8 HTML - Toolbar Button: Email with Link to Topic

    Realized this would be better on this forum than the WebHelp forum: Within a skin, I'd like to create a custom email button on my toolbar that would allow a user to email a direct link to a specific file in my RoboHelp project (a Share this Topic fea

  • Smart playlists on iPad?

    Is it possible to make "smart playlists" or playlists with rules, for the ipad? For instance, have a playlist that includes all songs rated 4 stars and higher, so when I rate a song it will be added to the playlist automatically? I can do it in iTune

  • Upgrading Adobe Acrobat

    I haev recently upgraded my mac from a Powerbook G4 to a Macbook Air with operating system OSX 10.7.4. I was running Adobe Acrobat 7.0 Standard (upgraded) on my old mac, but it will not run on the new system. Can I upgrade it to Adobe Acrobat X Profe

  • How to Consume web service in Adobe live cycle

    Hi Experts, I created a web service from FM and trying to consume that in Adobe live cycle. My problem is: 1. I don't know how can I test this webservice layout? Could you please provide me the steps on how to consume it properly and how to test it b