Error "No Managers" When run Requests

In oracle 11i General Ledger I find No Managers error when run Requests after posting a journal or any other task. So I deactivated the Managers and Try to activate again. But the activate option is in not active. I am not able to update sleep cycles and no prograrammes to run.
Please help me any one.

Hi again,
Do you have a putty connection to access oracle directories?
If yes, use Putty and logging as appsuser.
Go to location
# cd /COMMON_TOP/admin/scripts (or $ADMIN_SCRIPTS_HOME)
1. Check status of concurrent manager
sh adcmctl.sh status apps/appspswd
2. Shutdown the concurrent manager
sh adcmctl.sh stop apps/appspswd
2. Start the concurrent manager
sh adcmctl.sh start apps/appspswd
If you still having trouble with this, please inform your DBA regarding this issue.
HTH,
Vik

Similar Messages

  • RW-50004: Error code received when running external process.

    Hi,
    I am trying to install 11.5.10 on windows vista and receiveing following error.
    RW-50004: Error code received when running external process. Check log for details. Running Database Install Driver for VIS Instance
    When checked on the log file following is the error. Could anyone pls help me with this regard
    There was an error while running the command - c:\OracleApps\visdb\9.2.0\temp\VIS_erp\adrun9i.cmd APPS APPS
    The process tried to write to a nonexistent pipe.
    The process tried to write to a nonexistent pipe.
    The process tried to write to a nonexistent pipe.
    The process tried to write to a nonexistent pipe.
    The process tried to write to a nonexistent pipe.
    The process tried to write to a nonexistent pipe.
    The process tried to write to a nonexistent pipe.
    The process tried to write to a nonexistent pipe.
    The process tried to write to a nonexistent pipe.
    The process tried to write to a nonexistent pipe.
    RW-50010: Error: - script has returned an error: 1
    RW-50004: Error code received when running external process.
    "dbInstancecfg" file shows below error
    Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCVIS))
    TNS-12541: TNS:no listener
    TNS-12560: TNS:protocol adapter error
    TNS-00511: No listener
    32-bit Windows Error: 2: No such file or directory
    Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=erp.erp)(Port=1521))
    TNS-12541: TNS:no listener
    TNS-12560: TNS:protocol adapter error
    TNS-00511: No listener
    32-bit Windows Error: 61: Unknown error
    LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 13-JUL-2008 05:48:04
    Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
    Starting tnslsnr: please wait...
    TNS-12546: TNS:permission denied
    TNS-12560: TNS:protocol adapter error
    TNS-00516: Permission denied
    32-bit Windows Error: 5: Input/output error
    addlnctl.cmd exiting with status 3
    OpenSCManager failed
    adsvdlsn.cmd exiting with status 1002
    ERRORCODE = 1002 ERRORCODE_END
    .end std out.
    System error 1060 has occurred.
    The specified service does not exist as an installed service.
    .end err out.
    File c:\OracleApps\visdb\9.2.0\appsutil\install\VIS_erp\afmkinit_inst.cmd not instantiated in the current pass, this file will not be executed
    Executing script in InstantiateFile:
    c:\OracleApps\visdb\9.2.0\appsutil\install\VIS_erp\afmkinit.cmd
    script returned:
    Sun 07/13/2008
    05:48 AM
    1 file(s) copied.
    1 file(s) copied.
    1 file(s) copied.
    "afmkinit.cmd exiting with status 0"
    ERRORCODE = 0 ERRORCODE_END
    .end std out.
    .end err out.
    Skipping INSTE8_PRF
    Skipping INSTE8_APPLY
    [AutoConfig Error Report]
    The following report lists errors AutoConfig encountered during each
    phase of its execution. Errors are grouped by directory and phase.
    The report format is:
    <filename> <phase> <return code where appropriate>
    [SETUP PHASE]
    AutoConfig could not successfully execute the following scripts:
    Directory: c:\OracleApps\visdb\9.2.0\appsutil\install\VIS_erp
    adsvdlsn.cmd INSTE8_SETUP 1002
    AutoConfig is exiting with status 1

    Thanks for the update and the link was informational.
    Can I install following on windows vista? Pls confirm.
    Oracle® Applications 11i Release 10.2 Media Pack for
    Microsoft Windows (32-bit) No That's not possible, if you would like to use this machine for Applications then the OS needs to be changed or install vmware/Microsoft Virtual PC with a Certified Operating system to be able to use Applications.
    Thanks
    Ronald

  • Error has occurred when running internal order report

    Error has occurred when running internal order report. Last month also used this report without any error.
    Error #01: [ASE Error SQL422]Too many nested expressions or logical operators to compile. Try splitting query or limiting ANDs and ORs.
    Error #02: SQL Error: 422
    Error #03: An error occurred while reading the data; Navigation is possible.
    Please guide me to solve this issue.

    Please just say how you removed the CC version and did you remove the Preferences from Hidden User>Library??
    https://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-41.html
    In here??
    Sorry I'm trying to help but please answer the questions specifically... thanks.

  • Error Code -61499 when Running an FPGA VI on Develpement Computer with Siulated I/O

    Dear Forum
    I have a problem with running my FPGA VI on the development Comupter with simulated I/O
    I Created a testbench as described in
    http://zone.ni.com/reference/en-XX/help/371599D-01/lvfpgaconcepts/test_bench_tutorial/
    This works fine. I can read an write the I/O Nodes
    But when I insert a read/write control node (from the FPGA interface palette) into my Host-VI to directly write a value to a Control on my FPGA VI, i get the error -61499
    The error happens in the VI on my Hostcomputer ad the message is:
    An internal software error on LabView FPGA Module has occurred. Please contact NI technical support.
    The error does not happen, if I remove the read/write control, or if I dont call it.
    The error does not happen, if I compile the fpga-vi and let it run on my fpga hardware. It happens only in the simulated mode.
    The error happens in the simulated mode when i use the testbench for simulating input Signals, it also happnes, when I use random Input Signals.
    It seems that the error does not happen during compilation. The simulated VI runs and the error happens, only when I call the read/write control.
    Can anybody help me?
    I appreciate every suggestion
    Thanks
    David
    Solved!
    Go to Solution.

    Ok, the problem is solved, thanks to ni support who helped me:
    The solution is, not to have spaces and end of lines in the names of frontpannel elements.
    In simulated mode, a host-vi has problems to access frontpannel elements of the fpga-vi with the read/write node if the frontpanel elements have special characters.

  • Error in BIM when running in background mode

    Hi,
    I am facing an error when running a BIM in sm35.
    The BIM runs fine with my userid in all three modes( foreground,display error mode, background mode)....but fails when the functional person is testing in background mode. The BIM runs fine in all other modes.
    It gives the message when running in background mode
    "No batch input data for screen SAPLMGMW 4008"
    What should I check or do to correct it.
    Please help.
    Regards
    Rashi

    The BIM runs fine in Foreground mode and in Display error mode even for the functional..It is giving error only for Background mode.
    I also did the following
    1.   Created the BIM in my id and tried running( in background) it using the other id ...it was successful
    2.   Created the BIM in other id and ran ( in background) using my id....it failed.
    I will check again for authorisations also.
    Regards,
    Rashi

  • Runtime error ora-12703 when running utl_mail

    hello,
    I call a procedure through push button to use UTL_MAIL.send(..) and I got error ora-12703.
    There is no error during compilation.
    For your info, I manage to execute the same code on stored procedure using TOAD and I received the email sent using TOAD and telnet from my local.
    For info:
    Forms developer version:
    Forms [32 Bit] Version 10.1.2.0.2 (Production)
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
    With the Partitioning, OLAP and Data Mining options
    procedure:
    PROCEDURE test_email IS
    BEGIN
    UTL_MAIL.send (
    sender => '[email protected]',
    recipients => '[email protected]',
    cc => '[email protected]',
    bcc => '[email protected]',
    subject => 'Test',
    MESSAGE => 'Hello World',
    mime_type => 'text; charset=us-ascii',
    priority => 3
    END;
    Could anyone please help me on this.
    Regards,
    Dayang

    Hi All,
    I tried another function that use utl_smtp to send email.
    Again I could recieve email when I execute the function in TOAD but got error ora-12703 when I ran using forms.
    When I ran the form, only "debug 1st" apear, then after that it returned error ora-12703.
    Function:
    FUNCTION SEND_MAIL
    (pIssuer IN VARCHAR2,
    pReceiver IN VARCHAR2,
    pSender IN VARCHAR2,
    pSubject IN VARCHAR2,
    pMessage IN VARCHAR2) RETURN VARCHAR2 IS
    c utl_smtp.connection;
    respuesta utl_smtp.reply;
    pServer VARCHAR2(50) := '10.0.3.79';
    CRLF CHAR(2) := CHR(13) || CHR(10);
    BEGIN
    message('debug 1st');
    -- Abre la conexión al Server de correo
    c := utl_smtp.open_connection(pServer);
    message('debug2nd');
    respuesta := utl_smtp.helo(c, pServer);
    -- Inicia el Issuer del correo.
    respuesta := utl_smtp.mail(c, pSender);
    -- Inicia el Receiver
    respuesta := utl_smtp.rcpt(c, pReceiver);
    respuesta := utl_smtp.open_data(c);
    -- Escribe la cabecera del e-mail
    utl_smtp.write_data(c, 'From: ' || pIssuer || CRLF);
    utl_smtp.write_data(c, 'To: ' || pReceiver || CRLF);
    -- Escribe el Subject
    utl_smtp.write_data(c, 'Subject: ' || pSubject || CRLF);
    -- Escribe el texto del Message.
    utl_smtp.write_data(c, CRLF || pMessage);
    utl_smtp.write_data(c, CRLF || '.');
    respuesta := utl_smtp.close_data(c);
    -- Cierra la conexión
    respuesta := utl_smtp.quit(c);
    RETURN '0';
    EXCEPTION
    WHEN utl_smtp.transient_error OR utl_smtp.permanent_error THEN
    utl_smtp.quit(c);
    RETURN sqlerrm;
    --raise_application_error(-20000,
    -- 'El envío del email ha fallado devolviendo el siguiente error: ' || sqlerrm);
    END;
    Regards,
    Dayang

  • Error when running requests

    Hi
    We have Oracle EBS R12 on Unix machines.
    we cloned the production to another instance and every thing ran like a charm
    now, when I run any request it completes with error in the log:
    REP-3000: Internal error starting Oracle Toolkit.
    REP-3000: Internal error starting Oracle Toolkit.
    REP-0069: Internal error
    REP-57054: In-process job terminated:Terminated with error:
    REP-3000: Internal error starting Oracle Toolkit.
    Program exited with status 1
    Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 427765.
    Review your concurrent request log and/or report output file for more detailed information.
    Can anybody help!
    Thanks

    Hi,
    What should the value be set in this context file
    we have two servers, one for the DB and another for the Apps tier services with the CMYou can refer the following ML doc,
    [How to set environment variable DISPLAY for Oracle Applications to use xserver of another machine|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=340949.1]
    Thanks,
    Anchorage :)

  • Errors in Livecache when running a "check database structure"

    Helleo, i have the following error messages when i do a check database structure of our QA Livecache environment :
    DBA Action starts:
    Timestamp: 20090406141745   Function: cdb   Object: DATABASE
    VERIFY command:
    check data
    VERIFY result:
    ERR
    -24988,ERR_SQL: SQL error
    -9053,〰〰〰〰〰〰〰〰〰〳
    17,Servertask Info: because b01pverify_participant() failed
    10,Job 0 (Check Data) [executing] WaitingT147 Result=OK
    6,b01pverify_participant() failed, Error code 9161 "data_page_corrupted"
    17,Servertask Info: because b01pverify_participant() failed
    10,Job 0 (Check Data) [executing] WaitingT147 Result=OK
    6,b01pverify_participant() failed, Error code 9161 "data_page_corrupted"
    17,Servertask Info: because b01pverify_participant() failed
    10,Job 0 (Check Data) [executing] WaitingT147 Result=OK
    6,b01pverify_participant() failed, Error code 9161 "data_page_corrupted"
    DBA Action ends:
    Timestamp: 20090406141753   State:    Failure
    ANd i have the same result whether i run it from DB13 or from the database managerIs there a way to run the check database with a repair option ? How can i fix this ?
    Thanks for your help.
    Y.
    Edited by: Youssef ANEGAY on Apr 6, 2009 3:59 PM

    > I guess i'll have no choice but to restore the database ...
    Yes - most like that will be the case
    But before you do that, I'd check the hardware also (drivers, firmware, OS patches etc.). If the system is connected to a SAN I would also check the logs of that.
    Markus

  • Error indicate 007 when run F110proposal

    Hi,
       Yesterday I runned F110 for down payment request against PO of vendor 10000 with error message "No valid payment method " before vendor 10000 master data was maintained. And today I runned another F110 proposal  which also include this vendor with indicator error 007 shown up "error in creating payment document" .  Then I re-run proposal with ticket additional log and restrict to that vendor and got the information that "maitain default cost element in controlling area". This is the first time we met since we have used F110 for several years. I have checked vendor master data , F110 configure required and they are ok. Additionally I tested in QA and no issue happen. I felt this error is wierd and I don't know  which cost element should be maintained. How to deactive it?  Thanks.

    The easiest way will be to create the default cost element. Then run the proposal again and check the postings. I assume you have a discount procedure in place, and since we are treating a down payment, the system generates an automatic cost posting. This must be due to your customizing.
    Kind regards,
    Rudolf

  • ECC / Parity errors but 'only' when running qmaster / Compressor ?!!

    I have a Mac Pro that came with 4GB of (Apple) Ram. I recently installed 4 addiitonal (to fill both risers to 8GB total), of branded, supposedly apple-certified Ram from one of the major vendors we all have come to love and trust.
    Anyway, all seems fine - but now I am running QMASTER/Compressor which in fact wires (or at least pages) so much ram as to make good use of my 8: I have only 80MB free- but hey that's good, the memory is being used.
    Here's the odd thing, when doing compressor / qmaster tasks (this is both the cluster server and a service node) I now get ECC Parity errors:
    - Of my 8 chips, 3 have trown ECC Parity errors (all corrected), ranging from 1 on one chip to now 35 on another. This is in a 24h period
    - THis is on the APPLE ORIGINAL RAM - none of the 'new' chips have any errors ?!!!
    - Errors show up in 'about system' as well as the console log- but I ran EXTENDED Hardware test twice - and both times the memory (whole system) comes up clean!
    - ECC errors don't show up - as far as I can tell, if I don't 'extremely' tax the system - i.e. running email, Safari, iTunes and, maybe WoW keep it 'clean'! but also leave between 3-6GB memory 'free'
    - The errors occur on 2 seperate risers
    So, here's my dilemman - I can replicate this everytime i use compressor/qmaster. However, I never (yet) had a related crash or issues.
    It started with 'just' one chip, now it's 3 - again, all the original apple ram.
    My memory is installed correctly (i.e. both apple pairs together and both OWC together).
    I would LOVE to get some suggestions. Logic would say this is related to the new memory BUT I also never ran a compressor/qmaster renderfarm before now. I already opened a case with Apple and they are sending me one new chip (I opened at the time only one chip was having the errors).
    So - normal? Low enough at high volume I shouldn't worry? Routine with compressor and qmaster Or time to panic?
    THANKS!
    Dan

    This is very interesting. We, too, recently experienced a hard RAM Parity Panic/Crash on a Qmaster/Compressor encoder node. About two weeks earlier, we experienced a RAM Parity Panic/Crash on a system that has nothing to do with Qmaster.
    Both machines are dual G5 Xserves with factory-installed RAM. The encoder had six 512MB sticks while the non-encoder server had 2 1MB sticks.
    The encoder died, but when rebooted kept working by ignoring the bad RAM and working off only 2GB of the good RAM (must be in pairs).
    Apple replaced both sticks under warranty.
    As for Qmaster/Compressor causing the errors, I have no insight. If that were the case, I assume we'd see this on most if not all our encoders and cluster controllers. And that hasn't happened.
    I'd say, you got bad RAM and it needs to be fixed.
    The panic.log should give you insight into which dimm slot threw the error.
    Good luck!

  • Runtime errors "Raise_Exception" occur when running crystal report

    Dear all expert,
    I had develop a CR. It is fine and I can run it. but in our remote system, there is a runtime error "RAISE_EXCEPTION" with exception condition "EXECUTION_HALTED". There is no error show to me at CR side where the report is running fine. But I wonder why the is a runtime error in the remote system.
    Thank You.

    Hi Ingo,
    I had check the transport folder in my integration solution installer kit folder. There is only Folder with name "ansi" and "unicode_compatible".
    The readme for my transport file are as below:
    There are two sets of transport files, which can be used with BusinessObjects Enterprise Integration Kit for SAP. One set is ANSI and the other set is Unicode enabled.
    The set of transports you must use depends on the BASIS system your SAP system is running on. Additionally, each transport consists of a data file and a cofile, which are listed in brackets behind the transport names.
    If your SAP system is running on a BASIS system earlier than 6.20, you must use the files listed below:
    (These files are ANSI.)
    Open SQL Connectivity transport (K900084.r22 and R900084.r22)
    Info Set Connectivity transport (K900085.r22 and R900085.r22)
    Row-level Security Definition transport (K900086.r22 and R900086.r22)
    Cluster Definition transport (K900093.r22 and R900093.r22)
    Authentication Helpers transport (K900088.r22 and R900088.r22)
    If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below:
    (These files are Unicode enabled.)
    Open SQL Connectivity transport (K900574.r21 and R900574.r21)
    Info Set Connectivity transport (K900575.r21 and R900575.r21)
    Row-level Security Definition transport (K900576.r21 and R900576.r21)
    Cluster Definition transport (K900585.r21 and R900585.r21)
    Authentication Helpers transport (K900578.r21 and R900578.r21)
    The following files must be used on an SAP BW system:
    (These files are Unicode enabled.)
    Content Administration transport (K900579.r21 and R900579.r21)
    Personalization transport (K900580.r21 and R900580.r21)
    MDX Query Connectivity transport (K900581.r21 and R900581.r21)
    ODS Connectivity transport (K900582.r21 and R900582.r21)
    The dump "raise_exception" occur when in the Crystal Report Designer.
    Thank You.

  • Errors in DB13 when running checkDB

    Hello Experts,
    When I run checkdb, it is giving the following error
    BR0252W Function remove() failed for 'D:\oracle\BID\102\database\sap.ora' at location BrInitOraCreate-1      
    BR0253W errno 13: Permission denied                                                                          
    BR0976W Database message alert - level: WARNING, line: 568262, time: 2006-08-24 22.41.11, message:
    Checkpoint not complete
    Can anyone please advice on this issue.

    Hi,
    A late response, concerning LOG_BUFFER in Ora 10, but anyway
    I believe that you are encountering Oracle Bug: 4930608. This is outlined in MetaLink Note: 351857.1 as follows:
    Symptoms:
    In customer environment, no matter what value is specified for the log_buffer, the buffer size remains at @14mbs
    In 10G R2 Reference manual, it states that this parameter can no longer be modified and its set by default to 512K or 128K * the cpu count in the server. The document is in error.
    Cause:
    @From Bug 4592994....
    In 10G R2, Oracle combines fixed SGA area and redo buffer [log buffer] together. If there is a free space after Oracle puts the combined buffers into a granule, that space is added to the redo buffer. Thus you see redo buffer has more space as expected. This is an expected behavior.
    "In 10.2 the log buffer is rounded up to use the rest of the granule...
    @ From bug 4930608... @ The granule size can be found from the hidden parameter @ #"_ksmg_granule_size" and in your case is probably 16Mb".
    Solution:
    Log_buffer can no longer be modified and will be set by default by Oracle.
    Unfortunately a fix is not presently available, however you can remove the warning from dbcheck through transaction
    regards Steven

  • Error 10810 occurs when running with SCXI

    Iam running an LV example program in RT(PXI-8176,Daq Device PXI-6052E)and i have a SCXI 1520,seven 1125 & one 1102b modules in my SCXI Chassis.When i run example acquisition program iam able to acquire from module 1 & 2(i.e 1520 & one 1125)but from my 3rd module to the rest of modules i'm not able to acquire.I get an error saying that "Error-10810 unexpected error in Group config" what could be the reason?

    Hello,
    The problem is probably related to a conflict between the driver and the controlling module in your SCXI chassis. I have heard of this problem before when trying to acquire data from an SCXI-1125 that is slot 3 or higher of a SCXI chassis running in RT, and it resulted with that exact error.
    There was no fix such as upgrading to a newer version of the driver or anything like that. Rather, the problem was shown to occur only when the SCXI-1125 module was used to control the SCXI chassis. If they used any module other than the 1125 to control the chassis, then there was no problem.
    My suggestions to you are to try this exact thing - do not use an SCXI-1125 module as the controller for your chassis. If this doesn't happen to be the case, or this does not
    work out for you, then please post back to this discussion so we might be able to solve this problem. If you happen to post back, please list some more information such as driver version, OS, SCXI chassis, controlling module/slot, etc.
    Best of luck.
    Jared A

  • Error  Stack 1 when running external java function

    Hello,
    I defined 1 item that contains an external java program.
    When I launch the process, i receive following error on the
    Java agent listener screen :
    Thu Mar 07 10:25:10 CET 2002 Executing TST_JAVA/22 xx.yyyy.workflow.UpdateWorkflowAttribute
    Thu Mar 07 10:25:11 CET 2002 Enqueuing TST_JAVA/22 xx.yyyy.workflow.UpdateWorkflowAttribute
    Error Stack: 1
    WF_FN_ERROR (MODULE=xx.yyyy.workflow.UpdateWorkflowAttribute) (ITEMTY
    PE=TST_JAVA) (ITEMKEY=22) (ACTID=739) (FUNCMODE=RUN) (ERRMESSAGE=null)
    and the status remains deferred.
    Running the background engine does not change the status of the item. It remains deferred. Anybody has any idea of what is happening ?
    grtz,
    Chris.

    I remember rec. similar errors.
    If you are writing a simple code based on the code shown in the workflow guide, looks like you have included some statements which are invalid at run time. examine your code and try to remove all unnecessary statements. write a very simple piece of code by just inserting only the required statements and the error will vanish.
    hope this helps
    satish paul
    Hello,
    I defined 1 item that contains an external java program.
    When I launch the process, i receive following error on the
    Java agent listener screen :
    Thu Mar 07 10:25:10 CET 2002 Executing TST_JAVA/22 xx.yyyy.workflow.UpdateWorkflowAttribute
    Thu Mar 07 10:25:11 CET 2002 Enqueuing TST_JAVA/22 xx.yyyy.workflow.UpdateWorkflowAttribute
    Error Stack: 1
    WF_FN_ERROR (MODULE=xx.yyyy.workflow.UpdateWorkflowAttribute) (ITEMTY
    PE=TST_JAVA) (ITEMKEY=22) (ACTID=739) (FUNCMODE=RUN) (ERRMESSAGE=null)
    and the status remains deferred.
    Running the background engine does not change the status of the item. It remains deferred. Anybody has any idea of what is happening ?
    grtz,
    Chris.

  • Why do I get an Error Code 70229 when running Block Diagram ?

    Hi everyone,
    This error is very weird because at one time I got the block diagram to run and it worked well then when I tried it again after reopening the block diagram I got this error . 
    Can someone help me please ?
    I am using SolidWorks Premium 2014 x64 Edition.
    The attached files show the version I got for SoftMotion and for Labview 2013 32 bit installed . 
    PS. I had Labview 2013 64 bit installed but I removed it. not sure if any files remained that may cause this...
    Thank you,
    Isaiah 
    Attachments:
    Softmotion.JPG ‏54 KB
    Labview2013.JPG ‏55 KB

    Read related topic
    Thank you & Best regards
    syrpimp
    =======================================================
    “You must continue to gain expertise, but avoid thinking like an expert." -Denis Waitley

Maybe you are looking for