Error - No SAPscript message exists

Hi,
I am try to print a sales document into form, Gettin the following fatal error - No SAPscript message exists.
TD 000: No SAPscript message exists
Any one came across this error.
Cheers
Senthil

Hi,
R u using The Print_TEXT FM?
Then Go through the following link.
[http://help.sap.com/saphelp_nw04/helpdata/en/d6/0dba00494511d182b70000e829fbfe/frameset.htm]
If not then try to debug the SAPScript and Check in which Fm u r getting the error.
Regards
Sandipan

Similar Messages

Always getting "No SAPscript message exists" when printing

Hi,
our basis guy has added a new device type with a special driver for country specific characters.
Since that, I'm always getting the error "No SAPscript message exists", when I want to print something.
Also, when I just want to print for example a table structure in SE11. Is there something wrong with the
driver, or is it maybe just a wrong setting in the system?
Thank you!

Just use a different output device (SU3 has your user defaults) or ask your Basis admin to correct this.
It might have something to do with the settings in the device type in SPAD. On the Attributes tab, there is an option for SAPscript handling and also an option for ABAP List handling (SE11 printout would be treated as ABAP list). For example, device type UCPLAIN has "Do not use printer for ABAP list print".
In any case, I'm guessing the problem is most likely somewhere in the printer administration.

No SAPscript message exists

Hello ,
Could anyone let me know what are the reasons for the below error message .
Message no. TD000 : No SAPscript message exists
The error occurs in the transaction ME9F when i try to display the message.
Please note that the condition records are properly maintained and the Form exists in the table TNAPR.
Regards
Ramesh Ch

Hello,
I have the same message when I test a Sapscript form (transaction se71). The probleme doesn't exist when I test the form in language english.
How can I solve this problem (correct the text in logon language) ?
Colud you explain the operations to do.
Thanks in advance,
Daniel.

Error: Source system already exists. Message no. RSAR201. Points rewarded.

Error: Source system already exists. Message no. RSAR201
We have installed a BI 7.0 system recently and I am setting up the server to connect to SAP ERP.
In TA SM59 a connection to the SAP ERP has been established. The Remote Logon is OK, (meaning clicking it nothing happens). The Connection Test is OK.
According to the Best Practices paper: B84: BI Connectivity (B84)
http://help.sap.com/bp_biv170/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
I have done the following:
In TA RSA1
1.     Choose Modeling.
2.     Choose Source Systems.
3.     Select SAP in the window on the right.
4.     Choose the Context menu (right mouse click).
5.     Choose Create.
6.     Make the following entries:
Available destination: (The above tested connection)
Background user in source system: RFCUSER (I created the user in ERP according to step 1.4 in B84)
Password for source system: *****
Background user in BI: RFCUSER (I created the user in BI according to step 1.4 in B84)
Password for BI user: *****
8.     In the dialog box Please log on as an administrator in the following screen choose Continue.
9.     Log on to the Source System with your administrator user. Choose the correct client.
10.     On the dialog box New Source System Connection choose Continue.
THEN I GET THE ERROR:
Source system already exists.
Message no. RSAR201
What is wrong? I cannot locate any SAP notes to help on this problem.
Best regards,
Carsten Pold

Hello Carsten,
just some guessing at this point...
a)
Is the connection really new? For example, was there another system connected to that ERP, maybe with the same logical name? Or was any of the two systems copied from another system?
b)
Authorisations issues in this process may result in strange error messages. Make sure that the admin user in step 9 really has SAP_ALL. There are a lot of complex activities that this user must be able to do (ALE management, RFC access etc.). To exclude issues with the RFCUSER users: If possible, give them SAP_ALL, too. Of course only temporarily for testing.
c)
I normally don't use existing RFC destinations. Usually, I let the system create those, too. So maybe it makes a difference if you remove the RFC destinations on both sides and try again. In that case, you will of course have to provide the RFC details when creating the source system connection...
I hope this brings you forward a little...
Regards,
Christian!

Error in Local Message System: RFC destination MB3AP1039 does not exist.

Error in Local Message System: RFC destination MB3AP1039 does not exist. Message was Not Created
Message no. BCOS088
Hi,
When iam creating a message from any system from HELP-CREATE SUPPORT MESSAGE it is throwing the above error message. Actually i need to send this message to SAP solution Manager Service Desk.
Can anyone help me in resolving the above issue.
Thanks & Regards,
Mirza Kaleemulla Baig.

Dear friend
You have to of following option
1.Define Service Desk destination in the R/3 systems:
Note: for this you need to log in the R/3 system.
Create the RFC between the Solution manager and R/3 system (Login to the R/3 system)
2.a. Go to transaction SM30.
b. In table/view field, enter BCOS_CUST. Then press the Maintain Button. See example below:
c. Press the Continue button in the following screen:
d. You should see the following screen, no entries should be seen in the table. Press the New Entries button:
e. In the next screen, enter the following information:
In the RFC Destination you should point to your Solution Manager destination RFC.
0ss_msg w sm_bsmclnt_back cust620 1.0
shailesh

Error in Local Message System: RFC destination 10.189.98.10 does not exist.

Error in Local Message System: RFC destination 10.189.98.10 does not exist. Message was Not Created
Message no. BCOS088
Hi,
When iam going inside the tcode SM30 in the satellite system and entering the destination ip of solution manager system and after that when iam creating a message from HELP-CREATE SUPPORT MESSAGE, then it is throwing the following error.
Can anyone please help me in the above issue.
Regards,
Mirza Kaleemulla Baig.

Hi Mirza,
For the RFC destination don't enter the IP address,enter the RFC name,somthing like SM_SP1CLNT200_BACK which is maintained in sm59.
Revert for any clarifications.
Thanks and Regards,
Avinash.

Further error messages exist for this transaction

Hello all ,
i am getting en error message "Further error messages exist for this transaction" while creating an opportunity from external number ranges
please help me out how to solve this.
Regards
Ahmad

Hi Mohammad,
There might be any error transaction so there suppose to be an error insystem status. If you are able to generate opportunity number after saving than please do check in GUI with transaction crmd_order and check the message detail and revert.message detail is needed in order to proceed further.
Thanks,
Prem

Error while processing message payload Element PI SXMB_MONI (ECC to TM)

Dear Experts,
while processing an XML message in TM using receiver interface IntracompanyTransportationRequestRequest_In , we encounter an error message.
<SAP:Stack>Error while processing message payload Element 'StockTransportOrderReferenceIndicator' missing</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
ssee screenshot attached.
The field StockTransportOrderReferenceIndicator cannot be located in ECC and I cannot find what the system is expecting to populate here.
Can somebody propose an approach on how to investigate into this error message for the solution?
thanks a lot
Salvador

Hi Salvador,
Thanks for your reply. We were able to fix that issue. As of now we have managed to send sales order to TM but getting the following error. Messages are getting failed in SAP TM. Even if the product exists in the system (TM) still the error message persists. I have CIFed location, business partner, product from ECC and everything exists in SAP TM with the same business system group. Kindly advise. Did you happen to face any similar kind of issue during your implementation ?
Thanks & Regards,
Aunkur De

Error while Inserting message in JMS

Version : SOA 11G
I am getting following error while inserting message in JMS.
rror Message: {http://schemas.oracle.com/bpel/extension}bindingFault
Fault ID default/TestingSOA!2.0*soa_3b8b3493-6062-457c-8213-5dd613c95dd3/TransformData/30014-BpInv0-BpSeq0.3-4
Fault Time 06-Dec-2010 03:25:10
Non Recoverable System Fault :
<bpelFault><faultType>0</faultType><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Produce_Message' failed due to: ERRJMS_ERR_CR_QUEUE_PROD. ERRJMS_ERR_CR_QUEUE_PROD. Unable to create Queue producer due to JMSException. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. </summary></part><part name="detail"><detail>[JMSExceptions:045103]While trying to find a topic or a queue we could not find the specific JMSServer requested. The linked exception may contain more information about the reason for failure.</detail></part><part name="code"><code>null</code></part></bindingFault></bpelFault>
Steps followed while creating JMS
1. Login to weblogic console
2. Click Services>Messaging>JMS Module
3. Select SOAJMSModule
4. Click new, select Queue and press Next
5. Give JMS Name and JNDI
5. Pick Subdepolyment as "SOASUBDeployment" from dropdown and select JMS Server as "SOAJMSServer" and click "Finish"

Steps followed while creating JMS
+1. Login to weblogic console+
+2. Click Services>Messaging>JMS Module+
+3. Select SOAJMSModule+
+4. Click new, select Queue and press Next+
+5. Give JMS Name and JNDI+
+5. Pick Subdepolyment as "SOASUBDeployment" from dropdown and select JMS Server as "SOAJMSServer" and click "Finish"+
Next u need to create Connection Factory and u need to update or create(if doesnt exist) a new plan.xml
Follow the below link:
http://www.packtpub.com/article/installation-configuration-oracle-soa-suite-11g-2

Error in local message system; message 009999000035 not complete

Hello All.
I have configured Service desk in SolMan 7.0 which has patch level 14 and also configured in Satellite systems. I am using SM_...._BACK RFC connection in BCOS_CUST table. The user used by SM_...._BACK have the following roles in SolMan
SAP_SUPPDESK_CREATE,SAP_SV_FDB_NOTIF_BC_ADMIN
and SAP_SV_FDB_NOTIF_BC_CREATE.
However, when I try to create support message (Help --> Create support message) in satellite system, i am getting Error in local message system; message 009999000035 not complete.
I have also checked for Product_ID parameter which is not existing.
One important thing is, I can create support message in satellite system if I give SAP_ALL in that RFC user using in SM_...._BACK connection in SolMan.
So, this shows clearly that it is an issue with role/authorization.
Please suggest me !!
Thanks in advance.
Regards,
Satish.

Hmm not really. Profiles for the roles are also generated?
Those roles/profiles should be sufficient to create support messages.
Even though you assigned SAP_ALL and it worked afterwards I cannot imagine you got an auth. problem here anymore.
When assigning SAP_ALL did you really assign SAP_ALL to the RFC user or did you assign another user (who got SAP_ALL auth.) to the RFC connection?
The user who was logged on to the satellite system when the support messages have been created (with and without SAP_ALL assigned to the RFC user) has always been the same?
Just to make sure: did you set NO_USER_CHECK = X in Sol Man tx: DNO_CUST04?

Error code = 601; message="An Error happened during call of MaxDB Tool sdbi

I'm trying to install SAPNW7.0ABAPTrialSP12 and
I did these steps and was able to reinstall without any problems.
1. Run registry clean tool that came with the packaged software
\Additional_Tools\RegCleanTool
2. Then run Uninstall - System/Standalone Engine/Optional Standadlon ......
This is under the Software Life-Cycle Options-Uninstall
3. Check if there are any files located in
\Program Files\sapinst_instdir -
delete this directory
\Documents and SettinsThe specified item was not found.\Local settings\Temp
delete any references to SAP
The above steps helped me to reinstall the Trial software.
Make sure that the system for the install meet the following requirements:
u2022 Operating System: Windows XP Professional (Service Pack 2) or Windows Server 2003 or Windows Vista
u2022 Hostname must not exceed 13 characters
u2022 NTFS-File system
u2022 Internet Explorer 5.5 or higher or Firefox 1.0 or higher
u2022 At least 1 GB RAM (2-4 GB recommended)
u2022 Pagefile size according to your RAM settings.
u2022 Intel Pentium III/1.1 GHz or higher (or compatible)
u2022 30 GB hard disk space temporary during installation - 24 GB permanent
The actual hard disk space required is more than 32GB. It is best to install the SAP directory on a separate drive if possible. Othewise you have to make sure that the drive where you install SAP has sufficient space for you system and the SAP install.
u2022 High-resolution monitor (1024x768 or higher, 256 colors)
u2022 Make sure that no other SAP system is installed on your computer
u2022 The SAP system requires several ports for communication services. Therefore the file %WINDIR%\system32\drivers\etc\services must not include an entry for the ports 3200, 3600, 3900 and 8000. A possible entry can be excluded by using the hash symbol (#). (Note: The entry sapmsNSP 3600 for dialog instances may not exist, as it is set to 0 in Trial versions).
u2022 If no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter.
but it's happening the following error :
(Dec 6, 2023 9:32:54 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file J:\sapdb\NSP\log.txt for details.
(Dec 6, 2023 9:32:54 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile J:/DOCUME1/Nando/CONFIG1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile J:/DOCUME1/Nando/CONFIG1/Temp/MaxDBSAPNWPREV.log")
     at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
     at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Thanks,
Nando

I'm trying to install SAPNW7.0ABAPTrialSP12 and
I did these steps and was able to reinstall without any problems.
1. Run registry clean tool that came with the packaged software
\Additional_Tools\RegCleanTool
2. Then run Uninstall - System/Standalone Engine/Optional Standadlon ......
This is under the Software Life-Cycle Options-Uninstall
3. Check if there are any files located in
\Program Files\sapinst_instdir -
delete this directory
\Documents and SettinsThe specified item was not found.\Local settings\Temp
delete any references to SAP
The above steps helped me to reinstall the Trial software.
Make sure that the system for the install meet the following requirements:
u2022 Operating System: Windows XP Professional (Service Pack 2) or Windows Server 2003 or Windows Vista
u2022 Hostname must not exceed 13 characters
u2022 NTFS-File system
u2022 Internet Explorer 5.5 or higher or Firefox 1.0 or higher
u2022 At least 1 GB RAM (2-4 GB recommended)
u2022 Pagefile size according to your RAM settings.
u2022 Intel Pentium III/1.1 GHz or higher (or compatible)
u2022 30 GB hard disk space temporary during installation - 24 GB permanent
The actual hard disk space required is more than 32GB. It is best to install the SAP directory on a separate drive if possible. Othewise you have to make sure that the drive where you install SAP has sufficient space for you system and the SAP install.
u2022 High-resolution monitor (1024x768 or higher, 256 colors)
u2022 Make sure that no other SAP system is installed on your computer
u2022 The SAP system requires several ports for communication services. Therefore the file %WINDIR%\system32\drivers\etc\services must not include an entry for the ports 3200, 3600, 3900 and 8000. A possible entry can be excluded by using the hash symbol (#). (Note: The entry sapmsNSP 3600 for dialog instances may not exist, as it is set to 0 in Trial versions).
u2022 If no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter.
but it's happening the following error :
(Dec 6, 2023 9:32:54 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file J:\sapdb\NSP\log.txt for details.
(Dec 6, 2023 9:32:54 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile J:/DOCUME1/Nando/CONFIG1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile J:/DOCUME1/Nando/CONFIG1/Temp/MaxDBSAPNWPREV.log")
     at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
     at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Thanks,
Nando

PO Upload Error "Account does not exist in chart of accounts"

Hi All,
I am trying to upload PO data using LSMW (IDOC "PORDCR101"). For records which have GL account they(IDOC's) are erroring out with message "Account XXXXX does not exist in chart of accounts GBCA".
But the funny part is if I am able to create a PO using same GL manually from ME21N.
Any idea what this issue is?????
Thanks for your time.

Hi,
During Manual PO creation based on the Account Assignment Category field, a default GL account gets populated based on the FI settings.
for example if you enter as K defualt GL will get populated in PO creation.
where as in the case of LSMW it wont consider the GL assignment like how it considers in Manual and through's the error.
Consult the FI consultant also in this regard.
reward if useful
regards,
ANJI

Error in Local Message System

i wanted to send the messages
from solution manager menu help create support message , here I am
facing the problem when i am creating the message in the menu
HELP -> Create Syupport Message for your reference am attaching the
screen shot.
Error in Local Message System: Syntax program SAPLDNO_OW_SAP Message
was Not Created"
when i execute the Tcode NOTIF_CREATE message displaying that no RFC
authorisataion for user s000****
chers

Hi,
First off, this is a duplicate thread posted by gopal rao!! already two threads for this S000*** error exists.
Please read the rules before posting.
Secondly, I really wonder where the satellite system refers to S000***, S-Number!! accessing Solution Manager??!!
I already replied to gopal rao in another thread saying that he has not done basic configuration.
Follow the SPRO nodes in sequence to configure, It will solve your problem.
Feel free to revert back.
--Ragu

Application Document Not posted: No T100 message exists (ECC5.0)

Hi,
In the Inbound idoc processing, the customers are getting created without any problem, but the status of idoc is still being shown as "Application Document Not posted". It doesnt have any error message. The T100 Text in WE05 shows: No T100 message exists. When I processed this using BD73 in ECC5.0, in the foreground only one informative message displayed: "Special character for emptly field is /". Otherwise this got posted successfully. Can anybody suggest what could be the reason for the status not being shown as 53.
Regards,
Hari

This is probably not directly pertinent, but...
I am a (non-SAP) developer who hit this when developing an integration that sent IDocs inbound to SAP. we02 showed this mysterious error.
Using bd73 to process the IDoc in the foreground did not shed any light -- it just said "error during input of document" (or something like that)
The error was fixed by our BASIS admin - he said a job to cleanup log files had not been running. After he ran it, the same IDocs that generated this error processed fine when I resent them

Error: This entry already exists in the following tables "(ALR2)(ODBC -2035

Dear Expert,
I can not prepare Sales Order and Purchase Order in SAP B1-2007 SP 1(Both Documents Having on Approval ), due to following system error.
System Error:
This entry already exists in the following tables "(ALR2)(ODBC -2035) [Message 131-183]
Kindly check it and provided me solution.

Hi,
Check This
This Entry already in following tables "AIT1) (ODBC-2035) [message 131-183]
Regards
Deepak Tyagi

Error - No SAPscript message exists

Similar Messages

Maybe you are looking for