Error: no se ha podido abrir un archivo de memoria virtual porque el archivo esta bloqueado

Buenos días,
Me aparece este error al arrancar Adobe Photoshop 6SC con sistema operativo win7 32 bits. A pesar de tener permisos de administrador en la cuenta de usuario. Si lo ejecuto desde la misma cuenta pero con la opción de ejecutar como administrador funciona, pero para mi empresa no es válida porque todos los usuarios tienen que estar como usuarios restringidos.
Gracias

1. Puedes contactar con el Soporte técnico y facilitarles más detalles para solucionarlo. Se trata de un servicio gratuito de Adobe:
http://www.adobe.com/es/support/contact/
2. Consulta esta discusión (en inglés) sobre el mismo tema:
    http://forums.adobe.com/message/4529142
    Una de las soluciones apuntadas es la de "resetear" o borrar las Preferencias
   (Pulsa Ctrl+Alt+Shift al hacerlo sobre el icono de la aplicación para iniciarla)
Si da resultado esto u obtienes alguna respuesta, otros usuarios, en particular los que instalen Windows 8, estarán interesados o les resultará útil la forma de resolver el problema. Gracias
Elimina el archivo prefs.psp que se encuentra en la ruta C:\Users\[usuario]\AppData\Roaming\Adobe\Adobe Photoshop CS6.
Confirma por favor si la solución funciona y marca el tema como resuelto o solucionado si es el caso. Gracias.

Similar Messages

  • Al ejecutar adobe photoshop cs6 extended me aparece un mensaje de no se ha podido abrir un archivo de memoria virtual por que el archivo esta bloqueado y no se ejecuta la aplicacion

    Al ejecutar adobe photoshop cs6 extended me aparece un mensaje de no se ha podido abrir un archivo de memoria virtual por que el archivo esta bloqueado y no se ejecuta la aplicacion

    Are you able to get to the Performance preferences?  If so, check to make sure your Scratch Disk settings are valid for your current system configuration.
    It's possible you may need to reset your Photoshop preferences to defaults to restore operation.  This is how:
    Press and hold Control - Shift - Alt simultaneously (or Command - Shift - Option if on a Mac) immediately upon cold-starting Photoshop. If you get the keys down quickly enough - and you have to be really quick - it will prompt you to confirm deletion of your current preferences, which will lead to the establishment of a fresh default set. If it does not prompt you, you haven't been quick enough to get the keys down.
    -Noel

  • Holas! tengo una pregunta nesesito su gran ayuda!!!! yo tenia instalado el PS en window 8 me andaba genial pero cuando pase al 7 nunca mas me andubo me salta este error "no se ah podido abrir un archivo de memoria virtual por que no se ah podido encontrar

    ayudaaa!

    Yes in an STL file the subs have a comma after each In and Out Timecode (as a separator) and also they don't normally have line spaces between each entry. If you want the subs to be on two lines and "force" what goes on to the second line (rather than SP deciding for you) then where you want the return to be you need to add "bar" symbol (the one above the backslash on a Mac keyboard)
    Try it on a couple of lines of your subtitles to see if it works before committing. I usually create my subs as STL files but it should work
    Steve

  • Problema permisos al abrir photoshop CS6 (memoria virtual)

    Hola, he instalado photoshop CS6 en un portátil con una instalación limpia de Windows 8 y justo al arrancar da un error de memorial virtual que solo he podido resolver abriendo el programa como administrador.
    El error que aparece es:
    No se ha podido abrir un archivo de memoria virtual virtual porque el archivo está bloqueado, no tiene los permisos de acceso necesarios u otro programa está usando el archivo...
    Ya sé que el problema es de privilegios, lo he visto en alguna otra pregunta lo cual he podido comprobar porque si le doy entrar como administrador sí que entra, la pregunta es qué tengo que cambiar para no tener que entrar como administrador (los usuarios del pc tienen que poder abrirlo sin tener permisos de administrador ni conocer la contraseña).
    Gracias y saludos.

    Primera vez que comento en este foro, tuve el mismo problema y consegui la solución en otro foro, aproposito la respuesta es del 2008 y por tanto pense que no funcionaría.
    El usuario dice:
    "cuantas particiones tienes?
    el photoshop usa una determinada cantidad de espacio en tu disco duro C q se llama memoria virtual, al tener solo C tendras esos problemas porque tu memoria virtual sera muy poca, por eso es necesatrio que tengtas particiones para que puedas asignarlas como disco de memoria virtual..
    si ya tienes particiones(C:/ , D:/ , E:/ , F:/ ,...etc)
    solo tienes que asignarlas como memoria virtual en el photshop
    abres el photoshop y vas a:edicion/ preferencias/ plugins y discos de memoria virtual.. y eliges como primer disco de memoria virtual a la particion mas lejana ( por ejemplo F, luego E,.. D y por ultimo eliges C...)
    con eso ya es suficiente para no tener esos problemas.. "
    PD: Para configurar las preferencias debes ingresar como Administrador.
    Espero que sirva a muchos.
    Fuente: http://www.photoshop-designs.com/foro/viewtopic.php?t=27683

  • "returning error page for JRun too busy or out of memory"

    Hello,
    I've got some trouble to update a ColdFusion linux based.
    We have already tried to update from ASPB11-04 and ASPB11-14 but we always have the folloing erreor message :
    "returning error page for JRun too busy or out of memory"
    We really need a solution ASAP. Thanks!
    Jeff

    Can you share the exception and application logs having the error entries.
    Regards,
    Anit Kumar

  • Using Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".

    I'm not very tech savvy but am trying my best to use Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".
    Last night no problems, woke this morning and it was freezing so I forced a restart and got the grey screen with the folder and question mark. Ran off to best buy to get an external drive... Please help! Thank you!

    I have done both. When I hold down the "C" key it pauses for a few seconds while the cd spins and then the flashing folder icon appears.
    Could be you have the wrong cd/dvd.  The mac will only boot a supported cd/dvd for your machine. The flashing question mark indicdates your machine could not find a valid os.
    When I hold down the "option" key for the startup manager the cursor comes up and moves but the actually manager doesn't come up no matter how long I leave the laptop on.
    Not sure.  Could be your machine does not support the startup manager. You would think the machine would ignore the key.
    Where did you get the dvd?  What is the number on the DVD?
    What machine do you have anyway?
    This site provides more information, but lacks security.
    "A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
    http://www.appleserialnumberinfo.com/Desktop/index.php
    or
    This site provides more information, but lacks security too.
    "A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
    http://www.appleserialnumberinfo.com/Desktop/index.php
    http://www.chipmunk.nl/klantenservice/applemodel.html
        ( hint by K Shaffer  )

  • I am getting an error message when i try to export "Not enough memory" what do it do?

    I am getting an error message when i try to export "Not enough memory" what do it do?

    Your 400GB is not what I was speaking of. I was not speaking of disk space. I was speaking of memory.
    The memory in your computer needs to be 8GB or more, and you must have a 64 bit operating system (which can still happen even if your computer is less than 12 months old). What operating system do you have? Is it 32bits or 64bits?

  • Getting error, "Could not fill because there is not enough memory (RAM)" ,   using elemrnts 10 photo

    I am getting an error:  Could not fill because there is not enough memory (RAM). I am using photomerge in elements 10, and this error happens at the end of photomerging photos. System requirements are 1 GB of RAM (2 GB for HD video functions). My system has 4 GB memory (3.74 GB usable), which should be enough.  How large a system do I need to not get this error? Any other help would be appreciated.

      Have you tried completing the pano without selecting edge fill. Then crop the result or use the clone stamp to fill the blanks.

  • We installed  the Acrobat Reader 11.0.09  on Citrix enable Windows 2008 server  a month ago , it was working.  starting from this weeke we are receiveing error mesaage   AcroRD32.exe - application error  (Instruction at 0x...bad8  bad referenced memory at

    We installed  the Acrobat Reader 11.0.09  on Citrix enable Windows 2008 server  a month ago , it was working.  starting from this weeke we are receiveing error mesaage   AcroRD32.exe - application error  (Instruction at 0x...bad8  bad referenced memory at 0x....bad8 The memory could not be written  Click ok to terminate the program)
    Instruction at 0x...bad8  bad referenced memory at 0x....bad8
    The memory could not be written
    Click ok to terminate the program

    Hi SUBRAMANIAN,
    Are you still facing this issue? It seems to be conflict to me.
    Are you using any third party plugins with Acrobat? Try disabling and to use it again.
    Regards,
    Ajlan Huda.

  • Ola estoy en un problema y es q no he podido abrirle las bandas a mi celular por itunes por esta por bodafon de españa y le quiero colocar movistar de colombia lo hice por itunes y no me termina todo no me lee la sim card de movistar q hago

    ola estoy en un problema y es q no he podido abrirle las bandas a mi celular por itunes por esta por bodafon de españa y le quiero colocar movistar de colombia lo hice por itunes y no me termina todo no me lee la sim card de movistar q hago

    El telefono esta bloqueado. Tienes que contactar a vodafone Espana para que te lo desbloqueen. Lo hiciste?

  • VMware Player: Error while powering on: The file specified is not a virtual disk.

    dear vmware community,
    starting position:
    - vm (os ubuntu) running on esx 4.1
    - i moved the vmdk and vmx file on a windows client, for testing a local update
    - when i power on the vmx with vmware Player 7.1 i receive the error message:  Error while powering on: The file specified is not a virtual disk.
    anyone an idea for me? thank you!

    hi continuum,
    thanks for your replay.
    all files in D:\Webservice
    i also try to "create a new virtual machine" and attach the vmdk file. same error.
    would be great if you any idea for me!

  • No he podido abrir un archivo en Adobe Reader

    Cuando voy abrir un archivo en Adobe Reader, sale un mensaje " Adobe Reader ha dejado de funcionar" Lo he desinstalado y vuelto a instalar.
    Como podria resolver este tema ??

    Some things to try...
    Using Windows Explorer navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement
    Can you open Adobe Reader by itself?  If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
    If you cannot open Reader by itself, try to disable Protected Mode in the registry; download, unzip, then run the attached registry script
    It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

  • Error: "no se ha podido completar tu compra" "your puchase cannot be completed", Error: "no se ha podido completar tu compra" "your puchase cannot be completed"

    I´m trying to purchase an app (SEAiq Pilot). Every time I try to buy it, I am asked to confirm my VISA information, which is correct, I have a positive credit limit..
    It is the first time I´m trying to purchase an app....coud you please help me?
    Thanks!

  • Camcorder video error: "Unable to record. Resolution not supported by memory card."

    We purchased two Samsung Droid Charges the first day they were released and recently they've both been getting this error after 8-15 seconds of recording in HD (1280x720): "Warning: Unable to record. Resolution not supported by memory card."
    Called Verizon tech support, but they referred me to Samsung. Not knowing much about micro SDHC cards, I was alarmed to discover that the factory pre-installed 32gb card is only rated class 2 for speed. Samsung told me you need a minimum of speed class 4 or higher to record at this resolution. The only problem is you need an SD card installed in order to use the camcorder, period. In other words, all of us who payed an arm and a leg for the best phone Verizon sells now have to go buy our own micro sd card that actually supports all of the phone features as advertised?! The lowest prices I've seen for the faster cards are $70. Are we the only two Charge owners experiencing this problem?  I've read somewhere that lower speed class cards may initially support faster speeds than they are rated until they accumulate more files, so the problem may go undetected for some time until you have more files that are stored in different locations on the card (making them difficult to access at the faster speeds). This may explain why are the first ones to get this error since we've had the phones the longest and only 50% free space remaining on the SD card. Oh, Samsung also said they won't be able to replace your card for one that has the proper speed rating. Kind of seems like false advertising to say a feature is available (HD camcorder), and then not mention the fact that the memory card provided isn't sufficient for that feature (separate upgrade required). Anyone else sharing the same frustrations? Ideas?

    Thanks for the response. I've tried everything on that page. It's not an issue with the cable, or firewire port or the cable being connected properly, as the iSight camera works fine with iChat. I've disconnected the only other firewire device on the computer, didn't make any difference. Camera works fine in iChat, so it's not the camera itself. And, as I mentioned in the post, the same camera, if hooked up to my laptop, works just fine recording in QuickTime. So, it appears to be an issue with the QuickTime installation on this computer. I've done a search for the same error I'm getting and found some other occurrences with the same problems, but none that offered a solution.

  • Firefox does not open at all - error message when loading firefox 'The instruction "0x0000000" referenced memory at "0x0000000". The memory could not be "written". Click on OK to terminate the program in English

    I cannot open firefox at all. I have removed and re-installed but it has made no differenct. I just get an error message when loading firefox - as follows - 'The instruction "0x0000000" referenced memory at "0x0000000". The memory could not be "written". Click on OK to terminate the program.
    Can anyone help me sort this out? If I log in as someone else Firefox works?
    == This happened ==
    Every time Firefox opened
    == the computer shut down unexpectedly ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    You can o a malware check with a few malware scan programs.<br />
    You need to use all programs because each detects different malware.<br />
    Make sure that you update each program to get the latest version of the database before doing a scan.<br />
    * http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    * http://www.superantispyware.com/ - SuperAntispyware
    * http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    * http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    * http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

Maybe you are looking for