Error: No selected agent. Actually the agents are defined
Hi Experts,
In my workflow at one of the steps, the work item does not come to agents' inbox. In the LOG when i try to check agents I get the message "No selected agents".
In WF definition nothing is defined as responsible agents. the field is empty.
I tried to define the task as general task or to write down some user or org unit as possible agents. The result is the same.
There are no selected agents in the log.
Do anyone have any idea?
Thanks a lot,
Nina
hi,
"No selected agents".comes when for a dialog task have no agent assigned or when possible agent is not configured means you hav not make general task .
if after doing this too the dialog task show the same error , then run "SWU_OBUF" , this will refresh the system.
let me know if it helps
kakoli
Similar Messages
-
I cant make path selection work on the inner areas of my path selection
The problem is that it's only loading the outline of my path as the selection. All the inner areas aren't included, and I want to chop them out as well
Activate the Path Selection Tool.
Option-click on the compound Path's thumbnail in the Paths panel. That will select all components of the Path.
In the options bar, click the Subtract button to ensure all components are negative.
Click on the canvas outside of the entire path to deselect all of the path. Click on the line of the main outline path to select only it.
In the options bar, click the Add button to make the main outline positive.
The compound path should be correct now.
You can target the Path and the image layer then Add Vector Mask to the image layer, or Command-click the Path's thumbnail to get a marquee then Add Layer Mask to the image layer. -
The valuation area defined for the plant is not defined in table T001K.
when i creating the PO for plant ,s/m is giving the following meassage
The valuation area defined for the plant is not defined in table T001K.Hi,
You have two options to check:
Option---1: You defined your plant ( in t.code:OX10) and if then copy from existing plant(ex. 0001 0r 1000),check the plant not assigned to company code properly .Now assign in t.code OX18 and also check the table T001K after this configuration.
Option---2: Use t-code: OMWD, check whether your new plant ( valuation area) is assigned to valuation grouping code . If not assign the same .
Now try creating PO.
Regards,
Biju K -
Error occur while doing Determination the dep. area in the asset class
Hi All
Query about FI - AA
when I m trying to do determine depreciation area in the asset class with following path
Path in IMG
FA- AA- Valuation-- Determine depreciation area in the asset class
By following above path and my Asset class as soon as I select my Asset class and click on depreciation area Tab at left side I m heading with below error:
*"Contact your system administrator (Table error)"*
I don't have De.area 02 in my chart of depreciation and I don't want to maintain it. I just want to maintain Area 01 and 15
expecting expert opinion and feed back,
Thnx
BHi,
Please select the Depreciation Area, which you don't want to maintain for depreciation.
And delete the selected depreciation areas.
Thanks & Regards,
S. Umamageshwaran -
Error after selecting value from LOV - You are trying to access a page that is no longer active.
Created a simple page with a few text inputs and 4 LOV. After selecting a value from the last LOV the following error is displayed:
Error:
You are trying to access a page that is no longer active.
- The referring page may have come from a previous session. Please select Home to proceed.
OA Framework 12.1.3
Oracle OA Extension 10.1.3 - build 1313
Any pointers to the cause ?
Thanks[57]:EVENT:[xx.oracle.apps.ap..webui.EngagementCO]:OAF LOG: Event : Call Process Form Data, in: xx.oracle.apps.ap..webui.EngagementCO: Entering Process Form Data
[57]:EVENT:[xx.oracle.apps.ap..webui.EngagementCO]:OAF LOG: Event : Call Process Form Data, in: xx.oracle.apps.ap..webui.EngagementCO: Entering Process Form Data
[57]:EVENT:[fnd.framework.webui.OAFormValueHelper]:OAF LOG: Event : Get Attribute Value, in: oracle.apps.fnd.framework.webui.OAFormValueHelper: View:xxEngagementVO1 ,Attribute:VendorId , Return Value without datatype conversion :996
[58]:EVENT:[fnd.framework.webui.OAFormValueHelper]:OAF LOG: Event : Get Attribute Value, in: oracle.apps.fnd.framework.webui.OAFormValueHelper: View:xxEngagementVO1 ,Attribute:VendorSiteId , Return Value without datatype conversion :60158
[58]:EVENT:[fnd.framework.webui.OAFormValueHelper]:OAF LOG: Event : Get Attribute Value, in: oracle.apps.fnd.framework.webui.OAFormValueHelper: View:xxEngagementVO1 ,Attribute:BusinessPrincipalId , Return Value without datatype conversion :48375
[59]:EVENT:[fnd.framework.webui.OAFormValueHelper]:OAF LOG: Event : Get Attribute Value, in: oracle.apps.fnd.framework.webui.OAFormValueHelper: View:xxEngagementVO1 ,Attribute:AttorneyPersonId , Return Value without datatype conversion :37430
[59]:EVENT:[fnd.framework.webui.OAMessageLovInputHelper]:OAF LOG: Event : Get Attribute Value, in: oracle.apps.fnd.framework.webui.OAMessageLovInputHelper: View:xxEngagementVO1 ,Attribute:Vendor , Return Value without datatype conversion :CLIFFORD CHANCE
fnd.framework.webui.OAMessageLovInputHelper][60]:EVENT:[fnd.framework.webui.OAMessageLovInputHelper]:OAF LOG: Event : Get Attribute Value, in: oracle.apps.fnd.framework.webui.OAMessageLovInputHelper: View:xxEngagementVO1 ,Attribute:AttorneyName , Return Value without datatype conversion :Bloggs, Mr. Joe
[60]:UNEXPECTED:[fnd.framework.webui.OAPageContextImpl]:MACCHECK: . Parameter failing validation is :MatterCode. Parameter "MatterCode" failed Validation. Value got from request object is 2435
Incoming URL is : /OA_HTML/OA.jsp?page=/xx/oracle/apps/ap/legal/webui/EngagementPG&_ti=752953423&language_code=US&&OAFMID=94470&OAPB=_OAFMID&oapc=16&oas=xSrFYCAbgOaPGVhqpb0-hA.. .
Current URL is : /OA_HTML/OA.jsp?page=/xx/oracle/apps/ap/legal/webui/EngagementPG&_ti=752953423&language_code=US&&OAFMID=94470&OAPB=_OAFMID&oapc=16&oas=xSrFYCAbgOaPGVhqpb0-hA.. .
Referer URL is : https://paydev.company.com/OA_HTML/RF.jsp?function_id=48080&resp_id=53189&resp_appl_id=20003&security_group_id=0&lang_code=US¶ms=CtXL5LFdg5E7c.aFPRw7fTZ5STWrUsz9iXF2ByXh3F4&oas=gAqepzP-un4kBOC8NUxtIQ.. .
HTTP Request Method is : POST
[62]:ERROR:[fnd.common.Message.auto_log]:FNDFND_FORM_POST_SECURITY_FAILEDYHOMEFND_GLOBAL_PRMPT_HOME
[62]:ERROR:[fnd.framework.OAException]:You are trying to access a page that is no longer active.
- The referring page may have come from a previous session. Please select Home to proceed.
Click on browser Back button and all LOV values are empty on original screen. Try and select value from LOV and after selection:
[23]:EVENT:[xx.oracle.apps.ap.legal.webui.EngagementCO]:OAF LOG: Event : Call Process Form Data, in: xx.oracle.apps.ap.legal.webui.EngagementCO: Entering Process Form Data
[23]:EVENT:[xx.oracle.apps.ap.legal.webui.EngagementCO]:OAF LOG: Event : Call Process Form Data, in: xx.oracle.apps.ap.legal.webui.EngagementCO: Entering Process Form Data
[23]:UNEXPECTED:[fnd.framework.webui.OAPageContextImpl]:MACCHECK: . Parameter failing validation is :VendorId. Parameter "VendorId" failed Validation. Value got from request object is 996
Incoming URL is : /OA_HTML/OA.jsp?page=/xx/oracle/apps/ap/legal/webui/EngagementPG&_ti=752953423&language_code=US&&OAFMID=94470&OAPB=_OAFMID&oapc=17&oas=lC4tbZwHYHffQY6uX7agiA.. .
Current URL is : /OA_HTML/OA.jsp?page=/xx/oracle/apps/ap/legal/webui/EngagementPG&_ti=752953423&language_code=US&&OAFMID=94470&OAPB=_OAFMID&oapc=17&oas=lC4tbZwHYHffQY6uX7agiA.. .
Referer URL is : https://paydev.company.com/OA_HTML/RF.jsp?function_id=48080&resp_id=53189&resp_appl_id=20003&security_group_id=0&lang_code=US¶ms=CtXL5LFdg5E7c.aFPRw7fTZ5STWrUsz9iXF2ByXh3F4&oas=gAqepzP-un4kBOC8NUxtIQ.. .
HTTP Request Method is : POST
[25]:ERROR:[fnd.common.Message.auto_log]:FNDFND_FORM_POST_SECURITY_FAILEDYHOMEFND_GLOBAL_PRMPT_HOME
[25]:ERROR:[fnd.framework.OAException]:You are trying to access a page that is no longer active.
- The referring page may have come from a previous session. Please select Home to proceed. -
I get the "Do not disconnect" message all the time. When I try to eject the ipod the error message is that the ipod can not be disconnected because it is in use with an other application. I turn off all antivirus protection and the same result. I can not find what other application is accessing the ipod. The only way I can disconnect is to go to the drive that it is assigned to, and do an eject. The unit will sync properly but will not eject for itunes.
Forgot to say the mananging files manually and disk usage are not checked
-
Firefox 5.0.1 for Mac OS 10.6.8 is not allowing me to upload attachments. I get a pink band with the message "Files with errors will not be uploaded". When I click on the View Error link, it tells me "This file couldn't be added because it appears to be empty (0 bytes). " These are valid jpeg files that I have attached many times before, so I know there is no problem with the file. Also, Firefox has recently given me an error message about restarting in 32-bit mode to accommodate a plug-in. I have ticked the '32-bit" option in the Get Info window of the Firefox application.
I have been unable to drag and drop large files, even onto the Desktop, let alone onto my NAS - I get the dragged files freezing in the middle of the screen or I get the 'unable to copy / file in use' error.
Talking to Apple Support, they had me set up a new User, and then within that new account, the trouble went away. This pointed to the StartUp items being run in the original troublesome account,
I have deleted all of my 3rd Party programs and then installed them one by one until the problem came back, and in my case (Macbook Air 5,2 running 10.10.3 Yosemite) I found it was DropBox causing the conflict. I have DropBox running in the Menu Bar (top of screen) and disabling sync (bottom left corner) stopped the file copy problem. Try disabling DropBox sync is file copying is failing? -
'No authorization' error for selection values outside the authorized range
Hi All,
We are currently trying to use the authorization analysis concept for 'Cost center reporting'.
We have made 0COSTCENTER info-object as authorization relevant and have created a analysis authorization object for it through RSECADMIN and we have maintained a single value as '1875' . We have assigned this object to 1 of the test users.
So now if the user runs the report for cost center '1875' , he is able to view the data/report. Now if he enters any other cost center apart from '1875' than he gets an authorization error (Everything works as per requirement till this point).
But now if the user enters multiple cost centers like 1875, 1876, 1877 as multiple single values and runs the report, he gets an 'No authorization error'.
So all the experts, please let me know if it's possible in anyway for the user to see the result/report for the value he is authorized to (in this case - 1875) and should give an information/warning/error message saying that he is not authorized to other cost center (in this case - 1876, 1877).
Same thing is occuring if user enters a range. Suppose a user is authorized for cost center - 1875 to 1880. Now if he puts multiple single values or range in between the authorized range than he can see the result but if he enters even 1 single value outside the range he gets an error - what I mean by this is - if the user enter a range from 1875 to 1801, he does not get any data display but instead he recieves an error message saying 'No authorization' even though he is authorized for all the cost centers in that range except 1801.
I would really appreciate your help regarding this. Any comments/suggestions are very welcome.
Thanks & regards,
SunnyHi Sunny
That is the way analysis authorizations work!!
If you ask for a number of values i.e. cost centers and you don't have authorization to *all* of them you will get a system error as you say.
There is no way of partially evaluating the query as you suggest (only for the authorized values).
Try to be less restrictive when defining characteristic values in RSECADMIN.
In queries use variables with
Processing by Authorization and Input Ready.
So the system will tell the user which are the allowed values. In your example the system suggests the range 1875-1880.
Hope this helps, regards
Germá -
CCMSPING: Logon check error - Select one of the installed languages
Hi All,
For one SAP system I have logon check error (MTE: <SID>\Availability\<host>_<SID>I_<Instnr>\Logon-Check: RFC Error Message):
Select one of the installed languages
Could anybody help me resolve it?
Thanks a lot,
AlexanderCould you solve the problem?
Do you know the solution to this error message (Select one of the installed languages) regarding Logon-Check with CCMSPING?
Thanks in advance! -
Error whil adding Header to the ALV grid using OO
Hi Guys,
I want to display the Header for the ALV grid using Splitter .
when i am doing like that .I am getting a screen on the top of that screen I am getting a EMPTY screen .I don't know why likat.
What i need is just to display a Grid with header?Can anybody Please help me reagarding this problem.
the Code is Below.
*& Report Z_TEST_PGM
REPORT Z_TEST_PGM NO STANDARD PAGE HEADING
LINE-SIZE 120 MESSAGE-ID zotc.
Tables : CKMLMV003 , CKMLMV001.
TYPE-POOLS: slis.
Types : Begin of t_CKMLMV003_out,
WERKS type CKMLMV003-WERKS,
MATNR type CKMLMV003-MATNR,
MISCH_VERH type CKMLMV003-MISCH_VERH,
KALNR_BAL type CKMLMV003-KALNR_BAL,
GJAHR type CKMLMV003-GJAHR,
PERIO type CKMLMV003-PERIO,
MGTYP type CKMLMV003-MGTYP,
End of t_CKMLMV003_out,
Begin of t_CKMLMV001_out,
MATNR type CKMLMV001-MATNR,
KALNR type CKMLMV001-KALNR,
LIFNR_ND type CKMLMV001-LIFNR_ND,
EKORG_ND type CKMLMV001-EKORG_ND,
End of t_CKMLMV001_out,
Begin of t_CKMLMV003_Temp,
MATNR type CKMLMV003-MATNR,
GJAHR type CKMLMV003-GJAHR,
PERIO type CKMLMV003-PERIO,
End of t_CKMLMV003_Temp,
Begin of t_Final_out,
MATNR type CKMLMV003-MATNR,
GJAHR type CKMLMV003-GJAHR,
PERIO type CKMLMV003-PERIO,
WERKS type CKMLMV003-WERKS,
LIFNR_ND1 type CKMLMV001-LIFNR_ND,
MISCH_VERH1 type CKMLMV003-MISCH_VERH,
LIFNR_ND2 type CKMLMV001-LIFNR_ND,
MISCH_VERH2 type CKMLMV003-MISCH_VERH,
LIFNR_ND3 type CKMLMV001-LIFNR_ND,
MISCH_VERH3 type CKMLMV003-MISCH_VERH,
LIFNR_ND4 type CKMLMV001-LIFNR_ND,
MISCH_VERH4 type CKMLMV003-MISCH_VERH,
LIFNR_ND5 type CKMLMV001-LIFNR_ND,
MISCH_VERH5 type CKMLMV003-MISCH_VERH,
LIFNR_ND6 type CKMLMV001-LIFNR_ND,
MISCH_VERH6 type CKMLMV003-MISCH_VERH,
LIFNR_ND7 type CKMLMV001-LIFNR_ND,
MISCH_VERH7 type CKMLMV003-MISCH_VERH,
LIFNR_ND8 type CKMLMV001-LIFNR_ND,
MISCH_VERH8 type CKMLMV003-MISCH_VERH,
LIFNR_ND9 type CKMLMV001-LIFNR_ND,
MISCH_VERH9 type CKMLMV003-MISCH_VERH,
LIFNR_ND10 type CKMLMV001-LIFNR_ND,
MISCH_VERH10 type CKMLMV003-MISCH_VERH,
LIFNR_ND11 type CKMLMV001-LIFNR_ND,
MISCH_VERH11 type CKMLMV003-MISCH_VERH,
LIFNR_ND12 type CKMLMV001-LIFNR_ND,
MISCH_VERH12 type CKMLMV003-MISCH_VERH,
LIFNR_ND13 type CKMLMV001-LIFNR_ND,
MISCH_VERH13 type CKMLMV003-MISCH_VERH,
End of t_Final_out,
Begin of t_Final_out1,
MATNR type CKMLMV003-MATNR,
GJAHR type CKMLMV003-GJAHR,
PERIO type CKMLMV003-PERIO,
LIFNR_ND1 type CKMLMV001-LIFNR_ND,
MISCH_VERH1 type CKMLMV003-MISCH_VERH,
LIFNR_ND2 type CKMLMV001-LIFNR_ND,
MISCH_VERH2 type CKMLMV003-MISCH_VERH,
LIFNR_ND3 type CKMLMV001-LIFNR_ND,
MISCH_VERH3 type CKMLMV003-MISCH_VERH,
LIFNR_ND4 type CKMLMV001-LIFNR_ND,
MISCH_VERH4 type CKMLMV003-MISCH_VERH,
LIFNR_ND5 type CKMLMV001-LIFNR_ND,
MISCH_VERH5 type CKMLMV003-MISCH_VERH,
LIFNR_ND6 type CKMLMV001-LIFNR_ND,
MISCH_VERH6 type CKMLMV003-MISCH_VERH,
LIFNR_ND7 type CKMLMV001-LIFNR_ND,
MISCH_VERH7 type CKMLMV003-MISCH_VERH,
LIFNR_ND8 type CKMLMV001-LIFNR_ND,
MISCH_VERH8 type CKMLMV003-MISCH_VERH,
LIFNR_ND9 type CKMLMV001-LIFNR_ND,
MISCH_VERH9 type CKMLMV003-MISCH_VERH,
LIFNR_ND10 type CKMLMV001-LIFNR_ND,
MISCH_VERH10 type CKMLMV003-MISCH_VERH,
LIFNR_ND11 type CKMLMV001-LIFNR_ND,
MISCH_VERH11 type CKMLMV003-MISCH_VERH,
LIFNR_ND12 type CKMLMV001-LIFNR_ND,
MISCH_VERH12 type CKMLMV003-MISCH_VERH,
LIFNR_ND13 type CKMLMV001-LIFNR_ND,
MISCH_VERH13 type CKMLMV003-MISCH_VERH,
End of t_Final_out1.
Global Structures *
Data : i_CKMLMV003_str type t_CKMLMV003_out,
i_CKMLMV001_str type t_CKMLMV001_out,
i_Final_str type t_Final_out,
i_Final_str1 type t_Final_out,
i_CKMLMV003_Temp type t_CKMLMV003_Temp.
Global Internal Tables *
Data : i_CKMLMV003_out type standard table of t_CKMLMV003_out,
i_CKMLMV001_out type standard table of t_CKMLMV001_out,
i_Final_out type standard table of t_Final_out,
i_Final_out1 type standard table of t_Final_out.
ALV Report Internal tables *
DATA : t_fieldcatalog TYPE slis_t_fieldcat_alv,
s_fieldcatalog TYPE slis_fieldcat_alv,
t_basic_fieldcatalog TYPE slis_t_fieldcat_alv,
s_basic_fieldcatalog TYPE slis_fieldcat_alv,
t_sort TYPE slis_t_sortinfo_alv,
v_repid TYPE sy-repid.
*ALV Header declarations
Data: t_header type slis_t_listheader,
i_header_str type slis_listheader,
i_line_event_str TYPE slis_alv_event,
i_events TYPE slis_t_event,
wa_layout type slis_layout_alv.
Data : grid1 type ref to cl_gui_alv_grid,
g_custom_container1 type ref to cl_gui_custom_container,
grid2 type ref to cl_gui_alv_grid,
g_custom_container2 type ref to cl_gui_custom_container,
i_FCAT TYPE LVC_T_FCAT,
i_FCAT_str type lvc_s_fcat,
Structure for layout
i_layout_s TYPE lvc_s_layo,
gt_final1 type table of t_Final_out.
DATA: CCCONTAINER1 TYPE SCRFNAME VALUE 'CCCONTAINER1',
CCCONTAINER2 TYPE SCRFNAME VALUE 'CCCONTAINER2',
G_PARENT_TOP TYPE REF TO CL_GUI_CONTAINER ,
G_SPLITTER TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
G_DYNDOC_ID TYPE REF TO CL_DD_DOCUMENT,
G_PARENT_GRID TYPE REF TO CL_GUI_CONTAINER.
Global Variables *
Data :cnt(4) type n value '0',
g_plant type CKMLMV003-WERKS ,
g_QuanTStr type CKMLMV003-MGTYP ,
g_PurchOrg type CKMLMV001-EKORG_ND,
flag type n value '0',
g_cnt6 type n value '0',
g_cnt7 type n value '0',
g_cnt8 type n value '0',
g_cnt9 type n value '0',
g_cnt10 type n value '0',
g_cnt11 type n value '0',
g_cnt12 type n value '0',
g_cnt13 type n value '0'.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-011.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) TEXT-006 for field s_matnr.
Select-Options : S_MATNR for CKMLMV003-MATNR .
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) TEXT-007 for field S_WERKS.
SELECT-OPTIONS:S_WERKS for CKMLMV003-WERKS Default '2003'.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) TEXT-008 for field S_GJAHR.
SELECT-OPTIONS:S_GJAHR for CKMLMv003-GJAHR default Sy-DATUM(4) .
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) TEXT-009 for field S_PERIO.
SELECT-OPTIONS:S_PERIO for CKMLMV003-PERIO .
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(25) TEXT-010 for field P_MGTYP.
Parameters : P_MGTYP type CKMLMV003-MGTYP .
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN END OF BLOCK b1 .
At Selection-Screen on s_matnr .
Perform Validate_MatNumber.
At Selection-Screen on s_werks .
Perform Validate_CostingPlant.
At Selection-Screen on s_GJAHR .
Perform Validate_FiscalYear.
At Selection-Screen on s_PERIO .
Perform Validate_Period.
At Selection-Screen on p_MGTYP .
Perform Validate_QuantityStrType.
*& Form Validate_MatNumber
text
Form Validate_MatNumber.
DATA l_MATNR TYPE CKMLMV003-MATNR.
IF NOT S_MATNR[] IS INITIAL .
CLEAR L_MATNR.
SELECT single MATNR FROM CKMLMV003
INTO l_MATNR
WHERE MATNR = s_MATNR-LOW or MATNR = s_MATNR-HIGH.
ENDSELECT.
IF sy-subrc NE 0.
MESSAGE e999 WITH
'Enter a Valid Material Number'(001).
ENDIF.
ENDIF.
ENDFORM. "Validate_MatNumber
*& Form Validate_CostingPlant
text
Form Validate_CostingPlant.
DATA l_werks TYPE CKMLMV003-WERKS.
IF NOT S_WERKS[] IS INITIAL .
CLEAR L_WERKS.
SELECT single WERKS FROM T001W
INTO l_WERKS
WHERE WERKS = s_WERKS-low or WERKS = s_WERKS-high.
ENDSELECT.
IF sy-subrc NE 0.
MESSAGE e999 WITH
'Enter a Valid Costing Plant'(002).
ENDIF.
ENDIF.
ENDFORM. "Validate_CostingPlant
*& Form Validate_FiscalYear
text
Form Validate_FiscalYear.
DATA l_GJAHR TYPE CKMLMV003-GJAHR.
IF NOT S_GJAHR-low IS INITIAL or S_GJAHR-high IS INITIAL.
CLEAR L_GJAHR.
SELECT SINGLE GJAHR FROM CKMLMV003
INTO l_GJAHR
WHERE GJAHR LE sy-DATUM(4) .
IF NOT S_GJAHR-low LE sy-DATUM(4) or S_GJAHR-high LE sy-DATUM(4).
MESSAGE e999 WITH
'Enter a Valid Fiscal year'(003).
ENDIF.
ENDIF.
ENDFORM. "Validate_FiscalYear
*& Form Validate_Period
text
Form Validate_Period.
DATA l_PERIO TYPE CKMLMV003-PERIO.
IF NOT S_PERIO[] IS INITIAL .
CLEAR L_PERIO.
SELECT single PERIO FROM CKMLMV003
INTO l_PERIO
WHERE PERIO GE 1 and PERIO LE 12 .
ENDSELECT.
IF sy-subrc NE 0.
MESSAGE e999 WITH
'Enter a Valid Period'(004).
ENDIF.
ENDIF.
ENDFORM. "Validate_Period
*& Form Validate_QuantityStrType
text
Form Validate_QuantityStrType.
DATA l_MGTYP TYPE CKMLMV003-MGTYP.
IF NOT p_MGTYP IS INITIAL.
CLEAR L_MGTYP.
SELECT SINGLE MGTYP FROM CKMLMV003
INTO l_MGTYP
WHERE MGTYP = p_MGTYP .
IF sy-subrc NE 0.
MESSAGE e999 WITH
'Enter a Valid Quantity Structure Type'(005).
ENDIF.
ENDIF.
ENDFORM. "Validate_QuantityStrType
INITIALIZATION of Fields
Class LCL_EVENT_HANDLER DEFINITION.
Public section.
Methods:
TOP_OF_PAGE for Event TOP_OF_PAGE OF CL_GUI_ALV_GRID
IMPORTING E_DYNDOC_ID.
ENDCLASS. "LCL_EVENT_HANDLER DEFINITION
CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
METHOD TOP_OF_PAGE.
Top-of-page event <br />
PERFORM EVENT_TOP_OF_PAGE USING G_DYNDOC_ID.
ENDMETHOD. "top_of_page
ENDCLASS. "LCL_EVENT_HANDLER IMPLEMENTATION
Data : G_HANDLER TYPE REF TO LCL_EVENT_HANDLER.
Initialization.
v_repid = sy-repid.
Start-of-Selection.
Perform get_CKMLMV003.
Perform get_CKMLMV001.
Perform Get_Finaldata.
Perform Layout_FieldCatalog.
call screen '101'.
Perform ALVGrid_Final_Display.
*& Form Layout_FieldCatalog
text
Form Layout_FieldCatalog.
s_fieldcatalog-col_pos = 1.
s_fieldcatalog-fieldname = 'MATNR'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-024.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 2.
s_fieldcatalog-fieldname = 'GJAHR'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-012.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 3.
s_fieldcatalog-fieldname = 'PERIO'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-013.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 4.
s_fieldcatalog-fieldname = 'WERKS'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-025.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 5.
s_fieldcatalog-fieldname = 'LIFNR_ND1'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-014.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 6.
s_fieldcatalog-fieldname = 'MISCH_VERH1'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-015.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 7.
s_fieldcatalog-fieldname = 'LIFNR_ND2'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-016.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 8.
s_fieldcatalog-fieldname = 'MISCH_VERH2'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-017.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 9.
s_fieldcatalog-fieldname = 'LIFNR_ND3'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-018.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 10.
s_fieldcatalog-fieldname = 'MISCH_VERH3'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-019.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 11.
s_fieldcatalog-fieldname = 'LIFNR_ND4'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-020.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 12.
s_fieldcatalog-fieldname = 'MISCH_VERH4'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-021.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 13.
s_fieldcatalog-fieldname = 'LIFNR_ND5'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 14.
s_fieldcatalog-fieldname = 'MISCH_VERH5'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
if g_cnt6 <> '0'.
s_fieldcatalog-col_pos = 14.
s_fieldcatalog-fieldname = 'LIFNR_ND6'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 15.
s_fieldcatalog-fieldname = 'MISCH_VERH6'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt7 <> '0'.
s_fieldcatalog-col_pos = 16.
s_fieldcatalog-fieldname = 'LIFNR_ND7'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 17.
s_fieldcatalog-fieldname = 'MISCH_VERH7'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt8 <> '0'.
s_fieldcatalog-col_pos = 18.
s_fieldcatalog-fieldname = 'LIFNR_ND8'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 19.
s_fieldcatalog-fieldname = 'MISCH_VERH8'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt9 <> '0'.
s_fieldcatalog-col_pos = 20.
s_fieldcatalog-fieldname = 'LIFNR_ND9'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 21.
s_fieldcatalog-fieldname = 'MISCH_VERH9'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt10 <> '0'.
s_fieldcatalog-col_pos = 22.
s_fieldcatalog-fieldname = 'LIFNR_ND10'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 23.
s_fieldcatalog-fieldname = 'MISCH_VERH10'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt11 <> '0'.
s_fieldcatalog-col_pos = 24.
s_fieldcatalog-fieldname = 'LIFNR_ND11'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 25.
s_fieldcatalog-fieldname = 'MISCH_VERH11'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt12 <> '0'.
s_fieldcatalog-col_pos = 26.
s_fieldcatalog-fieldname = 'LIFNR_ND12'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 27.
s_fieldcatalog-fieldname = 'MISCH_VERH12'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt13 <> '0'.
s_fieldcatalog-col_pos = 29.
s_fieldcatalog-fieldname = 'LIFNR_ND13'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 30.
s_fieldcatalog-fieldname = 'MISCH_VERH13'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
ENDFORM. "Layout_FieldCatalog
*& Form get_CKMLMV003
text
Form get_CKMLMV003.
Select WERKS
MATNR
MISCH_VERH
KALNR_BAL
GJAHR
PERIO
MGTYP
from CKMLMV003
into table i_CKMLMV003_out
Where ( MATNR in s_MATNR and
WERKS in s_WERKS and
GJAHR in s_GJAHR and
PERIO in s_PERIO and
MGTYP = p_MGTYP ).
Sort i_CKMLMV003_out by MATNR KALNR_BAL.
ENDFORM. "get_CKMLMV003
*& Form get_CKMLMV001
text
Form get_CKMLMV001.
If Not i_CKMLMV003_out is Initial.
Select MATNR
KALNR
LIFNR_ND
EKORG_ND
from CKMLMV001
into Table i_CKMLMV001_out
for all entries in i_CKMLMV003_out
Where ( KALNR = i_CKMLMV003_out-KALNR_BAL
and WERKS = i_CKMLMV003_out-WERKS
and MATNR = i_CKMLMV003_out-MATNR ).
sort i_CKMLMV001_out by MATNR KALNR.
ENDIF.
ENDFORM. "get_CKMLMV001
*& Form Get_Finaldata
text
Form Get_Finaldata.
Loop at i_CKMLMV001_out into i_CKMLMV001_str.
Loop at i_CKMLMV003_out into i_CKMLMV003_str.
If ( i_CKMLMV001_str-KALNR = i_CKMLMV003_str-KALNR_BAL and i_CKMLMV003_str-MATNR = i_CKMLMV001_str-MATNR ) .
If ( flag = 0 ).
g_plant = i_CKMLMV003_str-WERKS.
g_PurchOrg = i_CKMLMV001_str-EKORG_ND.
g_quantstr = i_CKMLMV003_str-MGTYP.
flag = 1.
ENDIF.
Move i_CKMLMV003_str-MATNR to i_Final_str-MATNR.
Move i_CKMLMV003_str-WERKS to i_Final_str-WERKS.
Move i_CKMLMV003_str-GJAHR to i_Final_str-GJAHR.
Move i_CKMLMV003_str-PERIO to i_Final_str-PERIO.
Move i_CKMLMV003_str-MISCH_VERH to i_Final_str-MISCH_VERH1.
Move i_CKMLMV001_str-LIFNR_ND to i_Final_str-LIFNR_ND1.
Move-Corresponding i_CKMLMV003_str to i_CKMLMV003_temp.
Append i_Final_str to i_Final_out.
Clear : i_CKMLMV003_str .
ENDIF.
ENDLOOP.
Clear : i_CKMLMV001_str , i_Final_str , i_CKMLMV003_temp.
ENDLOOP.
Sort i_Final_out by WERKS MATNR GJAHR PERIO .
Loop at i_Final_out into i_Final_str.
if i_Final_str-MATNR = i_Final_str1-MATNR and i_Final_str-GJAHR = i_Final_str1-GJAHR and i_Final_str-PERIO = i_Final_str1-PERIO and i_Final_str-WERKS = i_Final_str1-WERKS.
cnt = cnt + 1.
Case cnt.
When 2.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH2.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND2.
When 3.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH3.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND3.
When 4.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH4.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND4.
When 5.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH5.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND5.
When 6.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH6.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND6.
g_cnt6 = 1.
When 7.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH7.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND7.
g_cnt7 = 1.
When 8.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH8.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND8.
g_cnt8 = 1.
When 9.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH9.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND9.
g_cnt9 = 1.
When 10.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH10.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND10.
g_cnt10 = 1.
When 11.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH11.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND11.
g_cnt11 = 1.
When 12.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH12.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND12.
g_cnt12 = 1.
When 13.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH13.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND13.
g_cnt13 = 1.
ENDCASE.
ELSE.
if cnt GE 1 .
append i_Final_str1 to i_Final_out1.
Clear : i_Final_str1.
ENDIF.
Move-Corresponding i_Final_str to i_Final_str1.
cnt = 0.
cnt = cnt + 1.
ENDIF.
Clear : i_Final_str.
Endloop.
append i_Final_str1 to i_Final_out1.
if i_Final_str-MATNR = i_Final_str1-MATNR and i_Final_str-GJAHR = i_Final_str1-GJAHR and i_Final_str-PERIO = i_Final_str1-PERIO .
cnt = cnt + 1.
Case cnt.
When 2.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH2.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND2.
When 3.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH3.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND3.
When 4.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH4.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND4.
When 5.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH5.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND5.
ENDCASE.
**Move-Corresponding i_Final_str to i_Final_str1.
ELSE.
if cnt GE 1 .
append i_Final_str1 to i_Final_out1.
Clear : i_Final_str1.
ENDIF.
Move-Corresponding i_Final_str to i_Final_str1.
cnt = 0.
cnt = cnt + 1.
ENDIF.
Clear : i_Final_str.
Endloop.
append i_Final_str1 to i_Final_out1.
ENDFORM. "Get_Finaldata
*& Form top_of_page
text
Form top_of_page.
clear t_header.
refresh t_header.
i_header_str-typ = 'H'.
I_header_Str-info = Text-035.
append I_header_str to t_header.
clear I_header_str.
Date
I_header_str-typ = 'S'.
I_header_str-key = Text-036.
CONCATENATE sy-datum+6(2) '.'
sy-datum+4(2) '.'
sy-datum(4) INTO I_header_str-info. "todays date
append I_header_str to t_header.
clear: I_header_str.
i_header_str-typ = 'S'.
I_header_Str-Key = 'Quantity Structure Type :'.
I_header_Str-info = g_QuantStr.
append I_header_str to t_header.
clear I_header_str.
i_header_str-typ = 'S'.
I_header_Str-Key = 'Purchase Org :'.
I_header_Str-info = g_PurchOrg.
append I_header_str to t_header.
clear I_header_str.
i_header_str-typ = 'S'.
I_header_Str-Key = 'Plant :'.
I_header_Str-info = g_Plant.
append I_header_str to t_header.
clear I_header_str.
CLEAR i_line_event_str.
i_line_event_str-name = 'TOP_OF_PAGE'.
APPEND i_line_event_str TO i_events.
call function 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = t_header.
i_logo = 'Z_LOGO'.
ENDFORM. "top_of_page
*& ALVGrid_Final_Display
Form ALVGrid_Final_Display.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = v_repid
i_DEFAULt = c_valx
i_callback_top_of_page = 'TOP_OF_PAGE'
i_Save = c_valx
it_fieldcat = t_fieldcatalog
it_sort = t_sort
it_events = I_events
TABLES
t_outtab = i_final_out1.
ENDFORM. "ALVGrid_Final_Display
*& Form ALVGRID_OO_Display
text
Form ALVGRID_OO_Display.
i_FCAT_str-col_pos = 1.
i_FCAT_str-fieldname = 'MATNR'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_fcat_str-seltext = 'MATERIAL'.
i_fcat_str-scrtext_m = Text-024.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 2.
i_FCAT_str-fieldname = 'GJAHR'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_fcat_str-scrtext_m = Text-012.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 3.
i_FCAT_str-fieldname = 'PERIO'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_fcat_str-scrtext_m = Text-013.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 4.
i_FCAT_str-fieldname = 'WERKS'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-025.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 5.
i_FCAT_str-fieldname = 'LIFNR_ND1'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_fcat_str-scrtext_m = Text-014.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 6.
i_FCAT_str-fieldname = 'MISCH_VERH1'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-015.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 7.
i_FCAT_str-fieldname = 'LIFNR_ND2'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-016.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 8.
i_FCAT_str-fieldname = 'MISCH_VERH2'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-017.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 9.
i_FCAT_str-fieldname = 'LIFNR_ND3'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-018.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 10.
i_FCAT_str-fieldname = 'MISCH_VERH3'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-019.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 11.
i_FCAT_str-fieldname = 'LIFNR_ND4'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-020.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 12.
i_FCAT_str-fieldname = 'MISCH_VERH4'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-021.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 13.
i_FCAT_str-fieldname = 'LIFNR_ND5'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-022.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 14.
i_FCAT_str-fieldname = 'MISCH_VERH5'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-023.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
if g_cnt6 <> '0'.
i_FCAT_str-col_pos = 15.
i_FCAT_str-fieldname = 'LIFNR_ND6'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
i_FCAT_str-scrtext_m = Text-022.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 16.
i_FCAT_str-fieldname = 'MISCH_VERH6'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
i_FCAT_str-scrtext_m = Text-023.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
ENDIF.
*if not grid1 is Initial.
If sy-SUBRC = 0.
Call Method grid1->set_table_for_first_display
CHANGING
it_outtab = i_final_out1[]
it_fieldcatalog = I_FCAT
EXCEPTIONS
Invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
Others = 4.
If sy-subrc <> 0.
ENDIF.
CALL METHOD G_DYNDOC_ID->INITIALIZE_DOCUMENT
EXPORTING
BACKGROUND_COLOR = CL_DD_AREA=>COL_TEXTAREA.
Processing events <br />
CALL METHOD GRID1->LIST_PROCESSING_EVENTS
EXPORTING
I_EVENT_NAME = 'TOP_OF_PAGE'
I_DYNDOC_ID = G_DYNDOC_ID.
Call Method grid2->set_table_for_first_display
CHANGING
it_outtab = i_final_out1[]
it_fieldcatalog = I_FCAT
EXCEPTIONS
Invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
Others = 4.
If sy-subrc <> 0.
ENDIF.
ENDIF.
ENDIF.
Endform. "ALVGRID_OO_Display
Form EVENT_TOP_OF_PAGE using DG_DYNDOC_ID
TYPE REF TO CL_DD_DOCUMENT.
DATA : DL_TEXT(255) TYPE C.
CALL METHOD DG_DYNDOC_ID->ADD_TEXT
EXPORTING
TEXT = 'Flight Details'
SAP_STYLE = CL_DD_AREA=>HEADING
SAP_FONTSIZE = CL_DD_AREA=>LARGE
SAP_COLOR = CL_DD_AREA=>LIST_HEADING_INT.
Endform.
*& Module STATUS_0101 OUTPUT
text
MODULE STATUS_0101 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
SET PF-STATUS 'STATUS'.
SET TITLEBAR 'TITLE'.
Create Object G_DYNDOC_ID
EXPORTING STYLE = 'ALV_GRID'.
if g_custom_container1 is initial .
create object g_custom_container1
Exporting
Container_name = CCCONTAINER1
Exceptions
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
Others = 5.
Create Object G_SPLITTER
Exporting PARENT = g_custom_container1.
CALL METHOD G_SPLITTER->GET_CONTAINER
EXPORTING
ROW = 1
COLUMN = 1
RECEIVING
CONTAINER = G_PARENT_TOP.
*Assigning the Part 2 to GRID
CALL METHOD G_SPLITTER->GET_CONTAINER
EXPORTING
ROW = 2
COLUMN = 1
RECEIVING
CONTAINER = g_parent_grid.Hi,
Check if any event is triggered from the event handler class, upon selection.
Usually, the events are handled on double click or on hotspot etc.
Regards,
Satish Kanteti -
My App 'Paper Notes' is error. My documents in the app are lose.
I need my document back. Please advise.I don't see it mentioned above, but when you remove the apps from your devices, have you been to system preferences > iCloud and checked that all your pages and numbers documents have been deleted from your storage, deleting them if necessary.
Also when you add things back, avoid adding documents with the same names as those you have been having problems with. -
Report template : where are defined the class
Hello,
I'm looking where the class are defined, such used in "before rows"
<td><table cellpadding="0" border="0" cellspacing="0" summary="" class="t1standard">
I'd like to add by owns or to modify existing one.Hello,
It's in the css file if you open up the page template there should be something like.
<link rel="stylesheet" href="#IMAGE_PREFIX#carl/theme_1/theme_V2.css" type="text/css" />
and thats the css file that is being used by your pages. Either edit that file (discouraged) add another file right after it it that overrides the classes you want to change or just change it inline in the page header or the template.
Take a look at this http://www.brainjar.com/css/using/
Carl -
A question about the getProperty method defined in the Security class
Hello Everyone!
I would like to ask a question about the getProperty method defined in the
Security class.
public static String getProperty(String key) Do you know how can I exract the list of all possible keys?.
Thanks in advance,I found the answer, in fact the keys are defined in the java.security file.
-
I am unable to remove a host from my Virtual Machine Manager 2012 R2. I receive the following error:
Error (2606)
Unable to perform the job because one or more of the selected objects are locked by another job.
Recommended Action
To find out which job is locking the object, in the Jobs view, group by Status, and find the running or canceling job for the object. When the job is complete, try again.
I have already tried running the following command in SQL Server Management Studio
SELECT * FROM [VirtualManagerDB].[dbo].[tbl_VMM_Lock] where TaskID='Task_GUID'
I received this error back:
Msg 8169, Level 16, State 2, Line 1
Conversion failed when converting from a character string to uniqueidentifier.
I have also tried rebooting both the host and the Virtual Machine Manager Server. After rebooting them both, I still receive the same error when trying to remove the host.
Here are my server details
VMM Server OS = Windows 2012 Standard
VMM Version = 2012 R2 3.2.7510.0
Host OS = Windows 2012 R2 Datacenter
Host Agent Version = 3.2.75.10.0
SQL Server OS = Windows 2012 Datacenter
SQL Version = 2012 SP 1 (11.0.3000.0)Hi there,
How many hosts are you managing with your VMM server?
The locking job might be the background host refresher job. Did you see any jobs in the jobs view, when the host removal job failed?
If there is no active jobs in the jobs view when this host removal job fails, can you please turn on the VMM tracing, retry the host removal, and paste back the traces for the failed job (search for exception and paste the whole stack)?
Thanks!
Cheng -
The agents are not getting determined
Hi Gurus,
In the standard workflow WS00300022 with BUS 2104 for Approval of Appropriate request, the agents are not getting determined.
Below are the steps followed:
We have created a subtype for BUS 2104 and redefined the display and edit to add some new functionality. Delegated the business object and followed all the standard steps. Now the present situation is that the Workflow is not able to determine agents.
We have even removed the subtype and checked with the standard functionality but still it is not determining the agents.Hi,
Kindly Diagnose your WF:-
Use the following transaction:-
1> SWE4/SWELS -> EVENT TRACE ON/OFF (Switch On the Event Trace)
2> SWEL -> DISPLAY EVENT TRACE
3> SWUD -> WF DIAGNOSTICS
4> SWPR -> WORKFLOW RESTART AFTER ERROR
Enter the WF Number and Click on the LOG Icon.
There you can see the Graphical Log of the WF to know where the WF is stuck.
And You can also check the Technical Details of the WF there, to find which WF Container has what value.
In the LOG, you can determine the step where it is unable to determine the Agent. That will give a picture of how to proceed further and what is the WF status at that point.
Kindly check and revert back, so that a solution can be provided.
Regards,
Kanika
Maybe you are looking for
-
Embedding a document in BI Publisher template
I have created a BIP template and I have a requirement to include attachments in the template. These attachments (PDF format) are located in a different server and are supplied as URLs. So basically I need to display the documents embeded from URL in
-
Can you stream from Amazon Prime using ATV?
I want to stream video from Amazon using my Prime account. Can that be done using most recent Apple TV?
-
Issues with Office 2010 and Acrobat Pro 8
Good Day All; We are in the middle of upgrading from Windows XP to Windows 7 with Office 2010 and I was wondering if there are any issues with importing Office documents into Acrobat Pro 8. I have found out that there are a couple of issue with Offic
-
I'm doing alittle research on Flex vs Silverlight - and i was wondering what level of support does Flex have from 3rd party vendors? I know there's ILOG Elixor UI components, and this Salesforce.com toolkit for Web Service API - is there a central pl
-
InfoPackage (Only for Vishvesh and Olav)
Sorry!!! This posting is made ONLY for Vishvesh and Olav to give points which I was not able to give them in another thread because of my mistake. Thank you very much for your understanding. Hi All. If anybody knows the solution for my question, plea