Error: no such device: ece4aa52-a24f-4585-a448-f43320f58b05.

So I was installing Arch Linux on my Toshiba Satellite and when I got to the reboot part rather than showing me the normal grub screen so I could pick linux it said"
GRUB loading.
Welcome to GRUB!
error: no such device: ece4aa52-a24f-4585-a448-f43320f58b05.
Entering rescue mode...
grub rescue>
"Can someone PLEASE help me fix this?

Did you run:
# grub-mkconfig -o /boot/grub/grub.cfg
It is almost impossible to help you if it is not clear what you have actually done so far.
I presume you were following the Beginner's Guide to the letter...

Similar Messages

Error: no such device 36A84D5EA84D1DAD

Hi,
I have both win7 professional and ubuntu 11.10 on my t410i.
Everything was ok, till I try onHackMe and it recognize some problems, it deleted my dlls and...After I restarted for finishing the task, my windows couldn't start....I deleted my c drive completely and restored my windows hardly to factory settings. Grub menu didn't change. And now both of Linux and windows works approximately good. But after I choose win7 in grub menu, before win startup I get this error:
"Error: no such device 36A84D5EA84D1DAD
Press any key to continue..."
It passing automatically after seconds, but I want to know what is it and how I can solve it?

HI shahrzad, (This should probably be in the Linux forum)
I'm guessing here, but this is probably because the UUID of the Windows partition has changed.
You might be able to fix it by booting Ubuntu and running update-grub.
Otherwise, try posting in a Ubuntu forum, or googling "ubuntu windows 7 grub Error: no such device uuid changed" or something similar.
[edit] This is just one of the reasons I miss grub legacy.
Good luck,
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Error no such device (after installation)

Dear all,
I'd like to gradually switch to Arch (from Ubuntu) so I decided to install it on a virtual machine (Virtualbox).
I followed the instructions in the "Unofficial Beginners Guide" and I thought I followed all the steps correctly.
The only thing that confused me a bit was the installation of the Virtualbox Kernel modules (to me from the guide it
is not clear if I have to install them in Ubuntu, the system from which I run the virtual machine, or in Arch the system
that is installed in the virtual machine).
Anyway I think I followed the procedure in the right way, and I didn't get any error message during the installation,
but apparently I made something wrong.
When I boot Arch, I get the GRUB menu. I select "Arch GNU/Linux with core repo kernel",
but I get this error message:
error no such device: (device id)
Loading Linux core repo...
error: no such partition
Loading initial ramdisk
error: you need to run the kernel first.
Press any key to continue...
When I press any key I get back to the GRUB menu.
If I select "Arch GNU/Linux, with core repo kernel (Fallback initramfs)"
I get the same error message.
Can you help me understanding where things might have gone wrong?
Thanks a lot in advance for your help,
and hopefully I'll join you soon in this Arch adventure
Best,
Luca

You downloaded it or you tried to flash (with LiveUpdate)?
Try >>clearing CMOS<<.

[SOLVED] [GRUB error] "no such device" "vmlinuz-linux not found"

SOLUTION AT POST #11
I just completed the install process onto a new machine. Grub starts but then returns these error messages.
Booting 'Arch GNU/Linux, with Linux core repo kernel'
error: no such device: ad4103fa-d940-47ca-8506-301d8071d467.
Loading Linux core repo kernel ...
error: file '/boot/vmlinuz-linux' not found.
Loading initial ramdisk ...
error: you need to load the kernel first.
Press any key to continue...
I installed Arch via a flashdrive (sdb), onto SATA port 1 (sda). SDA has a fresh MBR. Unfortunately, I have no way to post my grub config files. What files must I modify to get GRUB to work properly?
fstab: http://sprunge.us/SVMi
grub.cfg: http://sprunge.us/hQCB
Edit: Thread solved.
Last edited by qKUqm3wtY4 (2013-01-31 03:36:43)

SOLUTION
by: jynnantonix
Step 1: Start Arch via boot disc.
Step 2: Connect to internet.
Step 3: Mount partitions.
# swapon dev/sdX
# mount /dev/sdX /mnt
# mount /dev/sdX /mnt/home
# mount /dev/sdX /mnt/boot
Step 4: Chroot
# arch-chroot /mnt
Step 5: Remake grub.conf
# grub-mkconfig -o /boot/grub/grub.cfg
Another Notable Tip by: jynnantonix
If you need to post information from terminal to the internet, use the following:
[insert command here] | curl -F 'sprunge=<-' http://sprunge.us
example: ls -l /dev/disk/by-uuid/ | curl -F 'sprunge=<-' http://sprunge.us
example: cat /boot/grub/grub.cfg | curl -F 'sprunge=<-' http://sprunge.us
Last edited by qKUqm3wtY4 (2013-01-31 04:04:49)

[SOLVED]Grub error: no such device....

Here is the error after grub tab:
Thumbnails only -- Follow image posting rules --- Inxsible
This are my partitions and uuid:
lrwxrwxrwx 1 root root 10 Sep 11 12:39 124dca57-5a6e-483b-8563-0d1f7b03b12c -> ../../sda3
lrwxrwxrwx 1 root root 10 Sep 11 12:40 606fbea0-2aaa-44d0-8677-e93f49004ffc -> ../../dm-2
lrwxrwxrwx 1 root root 10 Sep 11 12:39 87f92183-9031-44cd-bf6c-1046a636b127 -> ../../sda2
lrwxrwxrwx 1 root root 11 Sep 11 12:39 99fcc4b6-ea63-46ed-b740-472d28e50d35 -> ../../loop1
lrwxrwxrwx 1 root root 10 Sep 11 12:39 b5024c82-b015-4e4e-a1c2-0777f31d9ff1 -> ../../sda4
lrwxrwxrwx 1 root root 10 Sep 11 12:40 be601ccb-531f-4947-9988-67d855f83bfb -> ../../dm-1
lrwxrwxrwx 1 root root 10 Sep 11 12:39 ef0cbf1f-d46d-40ca-973f-bda3f1b4fa95 -> ../../sda1
sda1 - boot(100MB), sda2 - swap, sda3 (/, ext4), sda4(ext4 - data storage...)
I installed archlinux for second time - first time I just partitioned it using cfdisk(so propably mbr and grub doesnt delete properly.
System couldnt start and showed that partition with uuid xxx is not there.
I connected that disk to usb of another computes and here is uuid of boot partition, with everything what is on it:
Thumbnails only -- Follow image posting rules --- Inxsible
Here is my grub.cfg:
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 ad4103fa-d940-47ca-8506-301d8071d467
else
search --no-floppy --fs-uuid --set=root ad4103fa-d940-47ca-8506-301d8071d467
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_input console
terminal_output gfxterm
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch GNU/Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-ad4103fa-d940-47ca-8506-301d8071d467' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 ad4103fa-d940-47ca-8506-301d8071d467
else
search --no-floppy --fs-uuid --set=root ad4103fa-d940-47ca-8506-301d8071d467
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=UUID=ad4103fa-d940-47ca-8506-301d8071d467 ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux.img
menuentry 'Arch GNU/Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-ad4103fa-d940-47ca-8506-301d8071d467' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 ad4103fa-d940-47ca-8506-301d8071d467
else
search --no-floppy --fs-uuid --set=root ad4103fa-d940-47ca-8506-301d8071d467
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=UUID=ad4103fa-d940-47ca-8506-301d8071d467 ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
How to solve it? What is wrong?
Last edited by rado3105 (2012-09-11 16:32:25)

Ok sorry.
The problem was that I didnt know that syslinux is alternative to grub. So I installed syslinux and also grub. Thanks

Getting Error Message - mount.ocfs2: No such device while mounting

I am trying to mount an ocfs2 file system. The file system seems to have been created fine but I get an error message when I try to mount it. Here's what I get :
[root@mdcpsdb1 init.d]# ./o2cb status
Module "configfs": Loaded
Filesystem "configfs": Mounted
Module "ocfs2_nodemanager": Loaded
Module "ocfs2_dlm": Loaded
Module "ocfs2_dlmfs": Loaded
Filesystem "ocfs2_dlmfs": Mounted
Checking cluster ocfs2: Online
Checking heartbeat: Active
[root@mdcpsdb1 init.d]# fsck.ocfs2 /dev/sdc1
Checking OCFS2 filesystem in /dev/sdc1:
label: oracle_hr
uuid: f6 23 5e 3b ad bb 49 87 81 a3 cb f0 b7 2a d0 ad
number of blocks: 24416784
bytes per block: 4096
number of clusters: 6104196
bytes per cluster: 16384
max slots: 4
/dev/sdc1 is clean. It will be checked after 20 additional mounts.
[root@mdcpsdb1 init.d]# mount -t ocfs2 /dev/sdc1 /hr_data
mount.ocfs2: No such device while mounting /dev/sdc1 on /hr_data
The same thing happens going through the ocfs2console.
Thanks,
David

Did you get anwer for this error? I got same error. Thanks in advance.

Disk Utility errors: No such file -or- No space left on device (50GB+ free)

I am trying to make an image out of a _NTFS formatted_ parition, using around 4,5GB of data, of a freshly installed Windozs. It's for debugging tons of machines I have been given (to debug..) and I need an image done. Note that debating if using an image as a solution is good or not is not the point of this thread.
When I try to make a new image out of the parition (clicking "New Image"), using the defaults settings, I enter my admin pass, then I'm being shown "No space left on device". Wierd. The device I am writing the image onto has 51GB left, and the Trash is emptied.
I tried changing the image format to all the possible types in Disk Utility, but I get the same error: No space left on device.
I then changed the device, this time I used a volume with 10GB free on it. Then, I only managed to get a standard DMG compressed image, where I need a "DVD/CD master" one. I'm still confused, because no other image type worked.
Then I tried making a new image (not from a disk or volume, empty) and then just copy data to it (I'm sure it's really not the way to go, but still). After creating the empty image (I opted for an 8GB, DVD burnable style, "DVD/CD master"), I got the wierd error: No such file (straigth after the image creation, in Disk Utility).
More info about volumes and stuff:
Data to be imaged:
A single partition on a volume (connected with IDE to Mac Pro, but I don't see why it would matter)
Where I can save it:
I got a big bunch of volumes right here, internally.
I tried one with 50GB free, but failed. Another one, on another disk, with 10GB, but failed.
Also, this error comes often in Disk Utility and other unix OS I think, and mostly for no real known reason (in OS X), as most issues I found were still unresolved.
Thanks for any help

Hey,
Im having the same exact problem.
Toast even says it has a medium error with this drive.
I cant burn with toast and it wont play other DVD-R movies
that I have burnt on other systems.
What is the fix?

Athereos wifi gives strange "no such device" errors

I've installed madwifi and udev loads the module (ath_pci) automatically on start... But the Network script complains the ath0 doesn't exist when I boot up:
Error for wireless request "Set ESSID" (8B1A) :
Set failed on device ath0 ; no such device.
Error, ath0: ioctl SIOCGIFHWADDR: No such device
Likewise, ifconfig doesn't show ath0 and iwconfig shows no wireless extensions. But I've got the right stuff in rc.conf:
lo="lo 127.0.0.1"
eth0="dhcp"
ath0="dhcp"
INTERFACES=(lo eth0 ath0)
and in /etc/conf.d/wireless:
wlan_ath0="ath0 essid MyEssid"
WLAN_INTERFACES=(ath0)
Also, I don't know if this is part of the problem but lspci tells me this about my wifi:
03:00.0 Ethernet controller: Atheros Communications, Inc. Unknown device 001c (rev 01)
What gives? Is there a known software bug? Is this unsupported hardware, contrary to what I've read about this laptop?
(Hmm, I haven't tried loading it without the country code. I'll see if that works... No, still doesn't work. Bugger.)
Last edited by Gullible Jones (2007-06-03 21:56:08)

Fivre: try blacklisting the pcspkr module in rc.conf.
Re ndiswrapper: worked out better than I expected... Installed fine, module was able to load, etc. However, wlan0 still doesn't exist. dmesg gives me:
ndiswrapper (ntoskernel_exit:2650): object dbec3de0 type 2 was not freed, freeing it now
ndiswrapper version 1.43 loaded (smp=yes)
ndiswrapper: driver net5211 (,04/05/2007,5.3.0.35) loaded
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
ndiswrapper (ZwClose:2194): closing handle 0xdeab25e8 not implemented
PCI: Setting latency timer of device 0000:03:00.0 to 64
ndiswrapper (NdisWriteErrorLogEntry:199): log: C0001389, count: 4, return_address: e051d054
ndiswrapper (NdisWriteErrorLogEntry:202): code: 0xde70b8cc
ndiswrapper (NdisWriteErrorLogEntry:202): code: 0x28
ndiswrapper (NdisWriteErrorLogEntry:202): code: 0xe03a5000
ndiswrapper (NdisWriteErrorLogEntry:202): code: 0xe03a5000
ndiswrapper (miniport_init:271): couldn't initialize device: C000009A
ndiswrapper (pnp_start_device:425): Windows driver couldn't initialize the device (C0000001)
unregister_netdevice: device eth%d/de70b000 never was registered
BUG: at net/core/dev.c:3259 unregister_netdevice()
[<c02bfdcf>] unregister_netdev+0xf/0x20
[<e04cd9bb>] wrap_ndis_remove_device+0x3b/0x200 [ndiswrapper]
[<e04ce39d>] NdisDispatchPnp+0x12d/0xdb0 [ndiswrapper]
[<c011f7d1>] __activate_task+0x21/0x40
[<c0170bbd>] cache_alloc_refill+0x16d/0x510
[<c011f569>] __wake_up_common+0x39/0x60
[<c011fba8>] __wake_up+0x38/0x50
[<e04c7842>] IoAllocateIrp+0x62/0xa0 [ndiswrapper]
[<e04c83e5>] IoBuildAsynchronousFsdRequest+0x35/0x170 [ndiswrapper]
[<e04c7b95>] IofCallDriver+0x55/0xc0 [ndiswrapper]
[<e04ca10b>] IoSendIrpTopDev+0xbb/0x120 [ndiswrapper]
[<e04ca1e3>] pnp_remove_device+0x73/0x1d0 [ndiswrapper]
[<e04ca6b4>] wrap_pnp_start_device+0x1f4/0x290 [ndiswrapper]
[<e04ca795>] wrap_pnp_start_pci_device+0x45/0x50 [ndiswrapper]
[<c01b568f>] sysfs_make_dirent+0x2f/0x50
[<c01b665e>] sysfs_create_link+0x6e/0x160
[<c0235398>] pci_match_device+0xa8/0xc0
[<c0235426>] pci_device_probe+0x56/0x80
[<c028c206>] really_probe+0x66/0x180
[<c028c369>] driver_probe_device+0x49/0xc0
[<c033f49d>] klist_next+0x5d/0xa0
[<c028c510>] __driver_attach+0x80/0x90
[<c028b6ea>] bus_for_each_dev+0x3a/0x60
[<c028c096>] driver_attach+0x16/0x20
[<c028c490>] __driver_attach+0x0/0x90
[<c028ba4b>] bus_add_driver+0x7b/0x1a0
[<c0235604>] __pci_register_driver+0x84/0xd0
[<e04bcbf7>] loader_init+0x107/0x230 [ndiswrapper]
[<e04caaef>] wrap_procfs_init+0x3f/0xb0 [ndiswrapper]
[<e014d0b5>] wrapper_init+0xb5/0xc2 [ndiswrapper]
[<c0148d5d>] sys_init_module+0x15d/0x1970
[<c0104232>] sysenter_past_esp+0x5f/0x85
=======================
ndiswrapper (miniport_halt:335): device de70b500 is not initialized - not halting
ndiswrapper: device eth%d removed
ACPI: PCI interrupt for device 0000:03:00.0 disabled
ndiswrapper: probe of 0000:03:00.0 failed with error -22
usbcore: registered new interface driver ndiswrapper
Time to file a bug on the ndiswrapper website?
(ndiswrapper -l says it's there though:
net5211 : driver installed
device (168C:001C) present
WTF?)
Last edited by Gullible Jones (2007-06-06 03:41:01)

WS-C6509-E not supporting 256 MB disk. upon inserting message pops up but "no such device" error comes when runing "sh disk0/1:"

WS-C6509-E not supporting 256 MB disk. upon inserting message pops up but "no such device" error comes when runing "sh disk0/1:"
SUP = 720 and 720-3B
00:08:03: %FILESYS-SP-5-DEV: PCMCIA flash card inserted into disk1
Router#
Router#
Router#
Router#sh disk1
%Error show disk1: (No such device)
Router#
Its working fine with 128 MB Disk

but my 128MB disk is working fine in both SUP and both slots..
And this only proves that the PCMCIA slot is not at fault. So this means that:
256mb PCMCIA card is dead; or
256mb PCMCIA card is not standard (non-Cisco)
I do not believe the 256 mb PCMCIA card is not working because it's not formated. Even if it's not formated properly the error message would've been different.

Kernel compiling - mount failed: No such device?

Hello everyone!
I'm having an issue with mounting the linux kernel I've just compiled. What I've done:
- I've patched linux-2.6.33.3 with patch-2.6.33.3-rt19 by issuing bzcat ../patch-2.6.33.3-rt19.bz2 | patch -p1
- sudo make -j4 all
- sudo make modules_install
- sudo mkinitcpio -g /boot/kernel26rt.img -k 2.6.33.3-rt19
- sudo cp ./arch/x86/boot/bzImage /boot/vmlinuz2.6.33.3x86-rt
- sudo cp ./System.map /boot/System.map2.6.33.3x86-rt
- sudo rm /boot/System.map
- sudo ln -s /boot/System.map2.6.33.3x86-rt /boot/System.map
- Edit grub/menu.lst:
# (0) Arch Linux
title Arch Linux2
root (hd0,2)
kernel /vmlinuz26 root=/dev/disk/by-label/root ro
initrd /kernel26.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,2)
kernel /vmlinuz26 root=/dev/disk/by-label/root ro
initrd /kernel26-fallback.img
# (2) Windows
title Windows
rootnoverify (hd0,0)
makeactive
chainloader +1
# (3) RT Kernel
title RT Linux
root (hd0,2)
kernel /vmlinuz2.6.33.3x86-rt root=/dev/disk/by-label/root ro
initrd /kernel26rt.img
Now when I select the rt kernel from grub, it fails with:
mount: mounting /dev/disk/by-label/root on /new_root failed: No such device
Can anyone help me figure out what went wrong?
-nonpoly

http://www.cs.bgu.ac.il/~arik/usail/net … /tips.html
Look under "Common NFS Errors"
I'm guessing you haven't installed nfs-utils and portmap on the client. Or you haven't started them. In the right order (portmap, then nfslock - you don't need to start nfsd on the client)

Eth0: unknown interface: No such device

Hi all
I know that this problem was being solved here, but I am still stuck.
During boot process I receive the message:
eth0: unknown interface: No such device
I have already configured /etc/rc.conf and module for Realtek Ethernet si also loaded.. I can see it in lsmod, so it's ok.
Configuration:
HP Compaq nc6120, 2.6.13-ARCH (default distriobution kernel)
Thanks a lot for help.

Hi
When I write lsmode I can see there module for ethernet realtek...something like eth1234 (i don't know name of module exactly because I am out of my linux box).So I think that there is no error.
I am still stuck with this problem ...:|

Oracle Secure Backup error: 'No such file or directory'

Hi,
could you help me to fix the following issue?
RMAN> run { ALLOCATE CHANNEL c1 DEVICE TYPE sbt PARMS='SBT_LIBRARY=C:\windows\
system32\orasbt.dll' ; backup database format 'CF_%d_%T_s%sp%pt%t'; }
using target database control file instead of recovery catalog
allocated channel: c1
channel c1: SID=8 device type=SBT_TAPE
channel c1: Oracle Secure BackupStarting backup at 26-OCT-09
channel c1: starting full datafile backup set
channel c1: specifying datafile(s) in backup set
input datafile file number=00001 name=C:\APP\AIME\ORADATA\ORCL\SYSTEM01.DBF
input datafile file number=00002 name=C:\APP\AIME\ORADATA\ORCL\SYSAUX01.DBF
input datafile file number=00003 name=C:\APP\AIME\ORADATA\ORCL\UNDOTBS01.DBF
input datafile file number=00004 name=C:\APP\AIME\ORADATA\ORCL\USERS01.DBF
input datafile file number=00005 name=C:\APP\AIME\PRODUCT\11.2.0\DBHOME_1\DATABA
SE\TBS_5.F
channel c1: starting piece 1 at 26-OCT-09
released channel: c1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on c1 channel at 10/26/2009 00:20:54
ORA-19506: failed to create sequential file, name="CF_ORCL_20091026_s10p1t701223
652", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:
sbt__rpc_cat_query: Query for piece CF_ORCL_20091026_s10p1t701223652 failed.
(Oracle Secure Backup error: 'No such file or directory').
Thanks,
jun

You can work entirely in Xcode by using the command-line tool template in C. Xcode > File > New > Project > Command-Line Tool > Next > Language: C > Next > Create.
If you do want to work on the command line, you may as well just use the "clang" program instead. The "gcc" tool is just a compatibility tool for existing scripts that are expecting the actual "gcc" program. Apple hasn't used the real "gcc" for years. (Read up on the GPLv3 for more information.)
The gcc/clang arguments are the same. The "-c" flag instructs the compiler to only compile a single .c file into a .o object file. It won't create an executable. If you are only compiling a single source file, just omit the "-c" flag and the compiler will create an executable named "a.out" that you can run by typing "./a.out". You can specify "-o <executable name>" if you want to specify a name. Once you get more than a handful of source files, using the terminal starts to become a hassle. At that point, you definitely want to start using Xcode.
I'm not sure why you would try to compile "helloworlddot1.c" and then get an error message about "filename.c". Something else is wrong.
If you are working in the Terminal, it is easiest to use the "cd" command to move into the same directory as your source files. Then you don't have to keep typing the full path.
It is hard to say what the "best" community is. There are many to choose from.

Oracle 9.2 RAC installation error on raw devices

During Oracle 9.2 RAC installation on Linux Red Hat 7.3 on raw devices
Database Configuration Assistant
returned the error message:
"Raw device validation check for Data File
"/dev/raw/clustdb_raw_cwmlite_100m" failed, No such file or directory".
Really this file exists, this is a link to a raw device.
How does Oracle validate the raw file?
What does this error mean?
Igor.

During Oracle 9.2 RAC installation on Linux Red Hat 7.3 on raw devices
Database Configuration Assistant
returned the error message:
"Raw device validation check for Data File
"/dev/raw/clustdb_raw_cwmlite_100m" failed, No such file or directory".
Really this file exists, this is a link to a raw device.OK, so you are saying that /dev/raw/clustdb_raw_cwmlite_100m is link to /dev/raw/raw<x> (x some number)??
If not - there is your error.
How does Oracle validate the raw file?File MUST exists (or link) AND it must be a RAW device.
You can check it by raw -qa (it should display all raw devices, with theirs major-minor pairs)
What does this error mean?
Igor. Hrvoje

Fatal error: No such file or directory: Unable to open VLDC instance

Hi,
Been researching this one for a few days and seems no one has an answer that works. I've been through over 200 pages and couldn't find the answer.
Environment:
Server: Blade 6000 -- T6300 blade module
OS: Solaris 10 05/08
T6300 ALOM version:
System Firmware 6.3.6 Sun Blade[TM] T6300 2007/03/23 12:45
Host flash versions:
Hypervisor 1.3.3 2007/03/23 12:28
OBP 4.25.3 2007/03/02 20:24
Sun Blade T6300 Server Module POST 4.25.3 2007/03/02 20:53
LDOMs Manager: 1.0.3
The following entry shows up in my log file:
[ Sep 5 16:29:26 Method "start" exited with status 1 ]
[ Sep 5 16:29:26 Executing start method ("/opt/SUNWldm/bin/ldmd_start") ]
Added to channel ds, service dr-cpu, versions 1.0
Added to channel ds, service fma-cpu-service, versions 1.0
Added to channel fmactl, service fma-phys-cpu-service, versions 1.0
Added to channel ds, service fma-mem-service, versions 1.0
Added to channel fmactl, service fma-phys-mem-service, versions 1.0
Added to channel fmactl, service fma-pri-service, versions 1.0
Added to channel spds, service mdstore, versions 1.0
Added to channel ds, service md-update, versions 1.0
Added to channel ds, service domain-shutdown, versions 1.0
Added to channel ds, service domain-panic, versions 1.0
Added to channel spds, service pri, versions 1.0
Added to channel ds, service var-config, versions 1.0
fatal error: No such file or directory: Unable to open VLDC instance /devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl fo
contacting hypervisor
[ Sep 5 16:29:27 Method "start" exited with status 1 ]
Any help would be greatly appreciated!!!

Hi Every one,
I after installing Ldom , when I try to start ldom
I am getting same error ..any fix or any suggestion ?
./ldmd_start
Added to channel ds, service dr-cpu, versions 1.1 1.0
Added to channel ds, service dr-crypto-mau, versions 1.0
Added to channel ds, service dr-crypto-cwq, versions 1.0
Added to channel ds, service dr-vio, versions 1.0
Added to channel ds, service fma-cpu-service, versions 1.0
Added to channel fmactl, service fma-phys-cpu-service, versions 1.0
Added to channel ds, service fma-mem-service, versions 1.0
Added to channel fmactl, service fma-phys-mem-service, versions 1.0
Added to channel fmactl, service fma-pri-service, versions 1.0
Added to channel ds, service keystore, versions 1.0
Added to channel spds, service mdstore, versions 1.0
Added to channel ds, service md-update, versions 1.0
Added to channel ds, service domain-shutdown, versions 1.0
Added to channel ds, service domain-panic, versions 1.0
Added to channel spds, service pri, versions 1.0
Added to channel ds, service var-config, versions 1.0
fatal error: No such file or directory: Unable to open VLDC instance /devices/vi rtual-devices@100/channel-devices@200/virtual-channel@0:hvctl for contacting hyp ervisor

USBECHI error. USB devices cutting out

Hi guys,
I am having a severe problem with my computer which happened ever since I installed my new motherboard: MSI 970A-G46
This is the error in event viewer:
"A timeout occurred while waiting for the EHCI host controller Interrupt on Async Advance Doorbell response."
I have updated bios to latest, uninstalled and reinstalled drivers. And it still seems to happen, randomly at that.
Anyone got any ideas?
Thanks,
Matt

Quote from: smashingcomputers on 24-November-13, 17:37:38
Hi guys,
I am having a severe problem with my computer which happened ever since I installed my new motherboard: MSI 970A-G46
This is the error in event viewer:
"A timeout occurred while waiting for the EHCI host controller Interrupt on Async Advance Doorbell response."
I have updated bios to latest, uninstalled and reinstalled drivers. And it still seems to happen, randomly at that.
Anyone got any ideas?
Thanks,
Matt
Yea, it sounds "severe" as I have no such device listed at all (EHCI host controller) in my G46-970a system... I think you might have the syntax wrong. or quite possibly your OS is looking for a network device no longer in your network. Do you by any chance have a 3rd-party USB card installed? Doesn't sound like it, but then, there's no EHCI controller, either. "Timeouts" generally occur across a network or the Internet--so it would appear your OS is attempting to query an "EHCI controller" and getting no response, and simply letting you know about it. "async Advance Doorbell response" sounds kind of kinky--like maybe your installation is looking for some kind of network burglar alarm system, or something...! You said you reinstalled Windows, and if so, then you are running some sort of strange network software that is looking for a device it cannot find--or, heck, maybe you've simply picked up a virus--some of those virus guys have a sense of humor every now and then--like "Doorbell response," that may be an example. Install MSE AV/malware software and scan all your drives just to eliminate that.
Also, your post lacks much in the way of critical information that would assist people in helping you--list of components, OS version, clocks, networks, etc. I'm just taking potshots here. I can say with authority, though, that the message you're getting has nothing to do with your G46-970a. After you scan for viruses and malware, I'd advise you to format c:\ and then reinstall Windows from scratch. (You should do this with any motherboard changeout as a matter of course.) Good luck!

Error: no such device: ece4aa52-a24f-4585-a448-f43320f58b05.

Similar Messages

Maybe you are looking for