Error:No text defined for language ZF usage A appl V.cond type ZABC(T685T)

Hi Experts,
I have created a new condition type ZABC for discount correction and the pricing is working perfectly as required.
The issue is when I login using Chinese language ZF, then I get the below error in VA01-
No text is defined for language ZF usage A appl V.cond type ZABC(T685T).
I checked the table T685T, and condition type ZABC is not maintained for language ZF.
I tried maintaining the table but was unable to.
Can anyone of you please help me how to maintain these entries in table T685T.
I think this can be done through config route. Please help.
Thanks and regards,
Sheetal

Hi,
Goto the Transaction code SE16 and enter the table and click on CREATE and maintain the Langage and text for you condition type.
there is no direct maintenance view for this table.
regards,
santosh

Similar Messages

Error as unit of measure PC not defined for language RO while creation ofPO

Hi GUYS,
When am trying to create a PO in ME21N transaction i got error as below,
unit of measure PC not defined for language RU
Message no. 06079
Table 006A contains no entry for this unit of measure
Please let me know what action to be taken from my side to over come this issue.
Note: If i check the related vendor i could able to view that the language maintained as RU.
Cheers,
Kumar.S

Hi Jurgen,
Thanks for your reply once again.
As mentioned by you earlier i have tried to login with languae RU in Q system but unfortunately i got an error saying taht language not installed.
Also we found for Language - EN and UOM - PC has been maintianed in T006A table.But if i check for lanugage - RU and UOM PC combinatoin has not manintaned in T006A table.
Please let me know how to maintain the values in this table T006A for combination Lang - RU and UOM - PC.
Please revert back with your soilution.
Note: I have tried in SM30 but failed due to below error
The maintenance dialog for T006A is incomplete or not defined
Cheers,
Kumar.S

Error message :PurchOrder : Unit of measure PC not defined for language ES,

Hello,
I am facing a problem with PO replication to R/3 backend.
POs are not replicated to R/3, POs are in status 'Transfer Failed (E.Sys.)' .
When I check with 'RZ20' transaction I got this message :
PurchOrder : Unit of measure PC not defined for language ES.
SRM 4.0 Extended classic scenario
Regards,
Shaiek

Hi
This seems to be a configuration issue,.
Pls maintain the unit of measure in configuration using transaction CUNI
Hope this will help.
Pls reward suitable points.
Regards
- Atul

Unit of measure not defined for language ZH

Hi,
We were creating a PO when we encountered the error which states "Unit of measure not defined for language ZH".
We executed CUNI to translate the units of measurement to our target language. System prompted "This object was segmented. Only new lines evaluated." What does this mean?
We tried creating the PO again, however we encountered the same error that the unit of measure was not defined for the language.
Please recommend action/s that we should take. Thank you.

Take a look at the below threads. Your problem has the solution.
Re: Unit of measure XX not defined for language DE
Re: Unit of Measure Error in Purchase order

Unit of measure PCS not defined for language FR

Dear Gurus,
I try to raise a PO in ME21N, when saving the order, I am being prompted by the system with the following message:
"Unit of measure PCS not defined for language FR"
I then went to MM02 to check the material master data "Sales Text" Tab.
There the only language available is English, so I clicked on the "Language Maintained" Tab and created a new language for French.
The problem is that when I want to save the changes, the system prompts me with the following message:
"Blank texts exist in the following languages: French and English, these texts will be deleted"
Then the Material Master Data closes and no changes have been made.
Can you please guide me through step by step of what I have to do to be able to populate the field "PCS" for pieces in French so that it is taken into account in the Material Master Data and by extension in a PO.
Thanks for your help.
KInd regards
Chris

Hi Chris,
Goto T code CUNI. In the first screen click on GOTO-Translation-dimension.
Enter EN in Source language and FR in Target.Maintain the entry there.

Unit of Measure TON not defined for language PT ?

Hi all,
I'm new to MM and to SAP in general and I have 2 questions for now :
1. I have a requisition which is set up using unit of measure TON. When I try to create the PO, an error message pops up saying " Unit of measure TON not defined for language PT ". Do you know what does language PT means and why does this error appears? When I try to convert the TON into TNE, the same message pops up : " Unit of measure TNE not defined for language PT ".
I also can not convert TON into EA...any ideas why?
2. How can I see the total value of a PO that has many lines ?
Thank you very much
Iuliana

Hi
Is this error "" Unidade de medida *** não definida em idioma PT ""
appearing only when you select Ton, or any other unit.
pl. clarify.
I have seen that you get this message when your loging Login language is Portuguese.
Any how Configuration of units needs to be checked in
Spro >General setting > check Units of measurements ,
( or pl. use Tcode -- Cuni )
I also can not convert TON into EA...any ideas why?
can you give me some more inputs, what erro are u getting ?
2. you can see the total Po. values in Po header details
under status tab view.
if my soln is found usefull
Pl. award me points
Thanks
Prasanna kumar .b.a

Unit of measure EA not defined for language PT

Hello,
Vendor Communication is maintained in "Portuguese language-PT", while creation of Scheduling agreement system will given the below error, bcz Scheduling agreement will taken the Langause from vendr master
"Unit of measure EA not defined for language PT"
Table 006A contains no entry for this unit of measure.
We have cross checked Material master and maintained the "langauge-PT" in material master additional data.
Checked T006A table for "EA" found for language "EN, DE, CN etc. not for "PT" how to maintain T006A table for Portuguase langauge.
Regards
Mahesh Naik

>
Mahesh Naik wrote:
> Hello,
>
> Suppose we have changed the source langauge "EN" to Target Langauge"PT" is it change all the Unit from EN to PT. after that how the system will pick english language's
No, it just gives you all the units maintained in that source language as a proposal to enter the description in target language PT, there will not be any change to the source language EN while maintaining a translation.

Error: "No JDK_HOME_PATH defined for key 'JDK1.4.2_HOME'" when local build

Hello SDN!
I want to build CRM ISA 5.0 application locally thru NWDS. This application uses Development Component technology. In the NWDI server track for this application has a build variant "default" with key "com.sap.jdk.home_path_key" and value for this key "JDK1.4.2_HOME".
When I try to build it locally I've got an error:
Error: com.sap.tc.buildplugin.util.BuildPluginException: No JDK_HOME_PATH defined for key 'JDK1.4.2_HOME'
     at com.sap.tc.buildplugin.JavaMacroContextProvider.setupJavaCompiler(JavaMacroContextProvider.java:235)
     at com.sap.tc.buildplugin.JavaMacroContextProvider.setupJavaEnvironment(JavaMacroContextProvider.java:180)
     at com.sap.tc.buildplugin.JavaMacroContextProvider.execute(JavaMacroContextProvider.java:35)
     at com.sap.tc.buildplugin.PrepareContextBuildStep.prepareTechnologySpecificData(PrepareContextBuildStep.java:187)
     at com.sap.tc.buildplugin.PrepareContextBuildStep.setupBuildFileCreatorContext(PrepareContextBuildStep.java:95)
     at com.sap.tc.buildplugin.PrepareContextBuildStep.execute(PrepareContextBuildStep.java:56)
     at com.sap.tc.buildplugin.DefaultPlugin.handleBuildStepSequence(DefaultPlugin.java:196)
     at com.sap.tc.buildplugin.DefaultPlugin.performBuild(DefaultPlugin.java:168)
     at com.sap.tc.buildplugin.DefaultPluginV3Delegate$BuildRequestHandler.handle(DefaultPluginV3Delegate.java:66)
     at com.sap.tc.buildplugin.DefaultPluginV3Delegate.requestV3(DefaultPluginV3Delegate.java:48)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.tc.buildtool.v2.impl.PluginHandler2.maybeInvoke(PluginHandler2.java:350)
     at com.sap.tc.buildtool.v2.impl.PluginHandler2.request(PluginHandler2.java:99)
     at com.sap.tc.buildtool.v2.impl.PluginHandler2.build(PluginHandler2.java:73)
     at com.sap.tc.buildtool.PluginHandler2Wrapper.execute(PluginHandler2Wrapper.java:59)
     at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1750)
     at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:6004)
     at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.buildDCsForDevConfig(BuildAction.java:307)
     at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.access$200(BuildAction.java:58)
     at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction$1.run(BuildAction.java:212)
     at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:101)
Error: Build stopped due to an error: No JDK_HOME_PATH defined for key 'JDK1.4.2_HOME'
I've created system environment variables JDK_HOME_PATH, JAVA_HOME and JDK1.4.2_HOME pointed to C:\j2sdk1.4.2_17. In NWDS parameter "Installed JREs" pointed to C:\j2sdk1.4.2_17. Nothing effect.
How to build this application locally?
Regards, Lev

Hi All,
the JDK_1.4.2_HOME must be set not as an environment variable or a VM parameter, but it must be set for the CBS service.
See the guide which -- among others -- also covers this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7014086d-3fd9-2910-80bd-be3417810c6f
- On 640/700 you can reach the CBS service settings from the Visual Admin.
(http://help.sap.com/saphelp_nw70/helpdata/EN/53/75b3407e73c57fe10000000a1550b0/frameset.htm)
- as of 710 you find it here:
http://<host>:<port>/nwa u2013 Configuration Management u2013 Infrastructure u2013 Java System Properties u2013 Component Build Service
(notice the SAP note: #1451364 - Modification of CBS service properties disabled in NWA
http://service.sap.com/sap/support/notes/1451364)
Some further hints:
- BUILD_TOOL_JDK_HOME = <path to highest JDK>
- JDK_HOME_PATHS = JDK1.3.1_HOME=<path of jdk131>;JDK1.4.2_HOME=<path of jdk142>;JDK1.5.0_HOME=<path of jdk150>JDK1.6.0_HOME=<path of jdk160>;default=<path of the JDK as default>
Some simple rules with examples:
- for BUILD_TOOL_JDK_HOME you simply enter the path to your JDK, e.g.: /opt/IBMJava2-amd64-142
- for JDK_HOME_PATHS you have to follow the scheme "key=value" e.g.: JDK_1.4.2_HOME=/opt/IBMJava2-amd64-142
- for BUILD_TOOL_JDK_HOME you always specify the highest JDK,
- for JDK_HOME_PATHS you list the available JDKs.
- JRE is not allowed, specify always JDK!
Best Regards,
Ervin

ERROR(No text fould) for a request loaded into InfoProvider.

Dear Experts,
I'm facing a typical problem. The regular data loads used to be fine. Since past 2 days, when the loads happen through the regular PCs, in some DSOs I find in the Datasource Name column DataSource Name and (No text Found),. The Sourcesystem column shows ERROR and the source system description shows ERROR(No text found). Although, the status of request loaded is green and is available for reporting. But in the next load it throws error saying the previous load is incomplete or improper.
Any help would be highly appreciated.
Thankx and Regds,
Kaushik

Thankx Srinivas for the reply.
But there have been no changes whatsoever, in the source nor in the BI Models. And it is happening continuously for the 3rd day. When I delete and reload, it just works fine.
Regds,
Kaushik

Goods Issue error - batches not defined for delivery item

Hi,
We are getting a Goods Issue error u201CThe batches are not defined for delivery item 000010u201D.   We are only getting this error for a material that is being shipped against a particular third party sales scheduling agreement. We went live in 2007 and we had no issues, but when we had to create a new Sched Agreement this year, for third party sales, we started to get this error. However, if we re-activate the old scheduling agreement we do not get the error. We have a batch job that executes the following steps:
1.     VL06IG (collective goods receipt)
2.     VL10 (collective delivery)
3.     VL06O (collective GI)
We have compared the 2 scheduling agreements and see no difference. We are assuming it has something to do with how the scheduling agreement was setup, but are not sure. Any suggestions on how to correct this problem would be much appreciated.
Thanks in advance,
Helen

Dear Murali,
The material has not changed at all. I'm not sure what you mean by maintaining batches while receipt of the material.
If I re-open the old scheduling agreement, we do not get the error message. However, as soon as we use the new SD scheduling agreement, we get the error. We are using the same material master on both scheduling agreements.
Thanks,
Helen

Unit of measure EA not defined for language RU

Hi gurus,
have you encountered this error while creating a PO? can't find any supporting document online.
please help how to resolve.
thanks,
mm

Hi Manohar,
Language RU (Russian) is not defined in our system and therefore the translation in CUNI is not the appropriate solution for this error.
Instead, we just maintained the vendor master to be in EN language to stop the system error.
thanks for your input anyway.
melanie

Error while creating PR, 'No Procurement defined for material 150'

Hi,
I am trying to create purchase requisition.
I am getting the following errors,
'No Procurement defined for material 150'
and 'Enter G/L Account'.
Please help me to correct these errors.
Thanks in adv.
Regards,
Eswar
Edited by: Eswar K on Jan 7, 2008 8:29 AM
Edited by: Eswar K on Jan 7, 2008 8:30 AM

Hi Eswar,
I think you have not extended the Purchasing view for that material.
Goto MM01 and select the material 150 then select the Purchasing view for the Organizational level (plant).
Or check the Procurement type in MRP2 view for that material.
Check the cross Plant material status in Basic data 1 & Purchasing view for that material, whether the material is blocked for any procurement.
Check all these you will find the solution.
rgds
Chidanand

Text ID for text object BUT000 does not exist

Hi Experts.
I am doing data migration using LSMW with IDoc. I have this error message "Text ID for text object BUT000 does not exist" when processing the IDoc.
Can anyone tell me what is this error about and how could i fix it. A step by step guide would be nice. Really need advice urgently.
I'll definitely rewards points.
Regards,
Julianna

for this u need to maintain the text object and its related text id using the TC: SM31 in rel. view of ur tcode( like MM01, Va01 etc).
first get the view names(1 for text object and 2 for text id) from fun. people.
then go to sm31 with 1 view, create BUT000 .
then go to sm31 with 2 view, maintain text id for the text object:BUT000.

LSMW input method error-No Customizing entry defined for period indicator Y in logon language

Hi,
I am creating one material through direct input method and its showing error '
No Customizing entry defined for period indicator Y in logon language'.
I am passing PERKZ ( periodic indicator ) as blank from file.
But when i am creating in foreground its automatically taking value 'M' and creating the material.
And also when i hardcode the value 'M' in LSMW then also its showing same error.
Can anyone please help urgently?
BR
Sumeet

Check in O02K what is maintained. As per your error message, External Period Indicator "Y" is missing for that logon language.
G. Lakshmipathi

Error message TD427 (A text element is not defined for form J_1IEWT_CERT)

Hello,
Q> I assign the SAP script form J_1IEWT_CERT to 'SPRO=>Withholding Tax Certificates for Vendor and Customers' and was trying to see the print preveiw. But once I press printpreview button error comes "ELEMENT TITLEDET WINDOW TITLEDET IS NOT DEFINED FOR FORM J_1IEWT_CERT" and i can't see the printprview.
Same thing I tried with the copy of J_1IEWT_CERT from 000 client to ZJ_1IEWT_CERT; but same error is coming.
If i try the printpreview through SE71 it shows without error.
Thank You.

"test printing" via SE71 only prints what exists in the form. Here your form is missing TITLEDET window and element.
The print program tries to print TITLEDET but it does not exist. Could you check SAP notes to get correct versions of print program and sapscript form.

Error:No text defined for language ZF usage A appl V.cond type ZABC(T685T)

Similar Messages

Maybe you are looking for