ERROR(No text fould) for a request loaded into InfoProvider.

Dear Experts,
I'm facing a typical problem. The regular data loads used to be fine. Since past 2 days, when the loads happen through the regular PCs, in some DSOs I find in the Datasource Name column DataSource Name and (No text Found),. The Sourcesystem column shows ERROR and the source system description shows ERROR(No text found). Although, the status of request loaded is green and is available for reporting. But in the next load it throws error saying the previous load is incomplete or improper.
Any help would be highly appreciated.
Thankx and Regds,
Kaushik

Thankx Srinivas for the reply.
But there have been no changes whatsoever, in the source nor in the BI Models. And it is happening continuously for the 3rd day. When I delete and reload, it just works fine.
Regds,
Kaushik

Similar Messages

Error when creating files for transport request SAPK-700BGINPLMWUI

Hello experts,
We're upgrading our 46c System to ERP 6.0 EHP4.
In Phase EHP_INCLUSION we get the following error Message: Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"
We've already checked the SAINT version; Upgrade Fix, SAPCAR version. We've checked our TMS as well and everything seems O.K.
Any help would be really appreciated!!!
Complete Error message:
EhP component PLMWUI, 700
Looking for SAINT package for 'PLMWUI' ...
R3upReadNewPackages:
patchType='U', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
... No matching package found.
R3upReadNewPackages:
patchType='I', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
Found: name = 'PLMWUI', release = '700', package = 'SAPK-700BGINPLMWUI', type = 'AOI'
... Matching package found: 'PLMWUI','700','SAPK-700BGINPLMWUI'
(trc) R3upPatchDisassembleQueue: 1 package queue entries
(trc) R3upPatchDisassembleQueue: force=YES
(trc) R3upPatchDisassembleQueue: 1 packages will be disassembled
Starting disassembling package queue
Date & Time: 20100319133139
Starting RFC Login to: System = "X05", GwHost = "sxt ", GwService = "sapgw00"
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "SPDA_DISASSEMBLE_QUEUE" by RFC
Input table IT_PATQ:
"SAPK-700BGINPLMWUI","000","AOI","PLMWUI","700","SAP PLM Web UI","00"
Call of function module "SPDA_DISASSEMBLE_QUEUE" by RFC succeeded
Logging off from SAP system
Date & Time: 20100319133139
Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"

Hello Anthes,
Please Check the things in following sequence :
1.Use latest SAPehpi, R3trans and tp versions.
2. users/group authorization issue and/or ownersip limitations (set 777) .Reboot the server to make sure, that the authorisations are updated and there is no lock on a file in the EHPI dir.Repeat the phase.
Folders where permissions should be 777 are Upgrade directory, Data Directory, Cofile directory and .../EPS/in.
3. Source file corruption can be ruled out by execution
R3trans -l /usr/sap/<SID>/..../abap/data/R-700BGINPLMWUI.SAP (The data file corresponding to the Package which is giving error). Check if this ends fine.
Note 2050
4. Confirm that your transport tool is 'healthy' by testing it in STMS. In SPAM in client 000 use the function Disassemble package and enter the package <Package name>.
5. Try to update the kernel if it not helps.
Best Regards
Niraj

How do I find the URL for a document loaded into Buzzword?

How do I find the URL for a document loaded into Buzzword?

What kind of document? What is Buzzword?

To capture no of records loaded into infoprovider

Hi,
I have a requirement such that, to capture the no of records loaded daily into infoprovider.
I want to know which table captures the daily load no of records in an infoprovider.
Based on the data, I have to make an abap program for analysis ?
Can you please let me know which table holds this data ?
Thanks

Hi,
We usually measure number of records in the cube by Fact table, but if the cube is compressed, may be you have to check the E table too. For the ODS, you can check the Active Data table.
Cube - /BIC/E(Cube name) or /BIC/F(Cube name)
ODS - /BIC/A(ODS name)00
Also u can Use the programm SAP_INFOCUBE_DESIGN.
Hope it helps,
Thanks,
Amit
Edited by: Amit Kr on Aug 28, 2009 3:25 PM

Error in Data activation for ODS data load

We were succesfully loading data (delta load) so far for a CRM ODS. Suddenly, yesterday we are getting am error while trying to activate the data. - "No data packet numbers could be determined for request REQU_48C2T4S91I6GSJ4FNUE727M1Y- Message no. RSAODS119".
We could not even see the data in PSA.
Any clues why this would have happened? tRFC issue?
Thanks for your ideas/
Regards
Raj

Hi,
What happens is data packets gets distributed across different Instances/Application Servers.
To distribute users equally on SAP Instances check SMLG Transaction and to distribute RFCs equally on SAP Instances check transaction RZ12
To assign specific BW Instance enter the instance in target system settings. In different source systems different fixed target instances can be assigned.
Check Transaction RSCUSTA2 for load balancing for activation of ODS Object data.
Hope it helps.
Mona

Error in Setting lock for Master Data Load

Hi Team,
I encounter the following error while uploading the Masterdata
"Lock NOT set for: Loading master data attributes
Attributes of characteristic 0BPARTNER are locked by terminated change run 465451241"
I Performed the following steps
1) Checked if any active jobs (change run jobs) running in the system. But no jobs running.
2) RSATTR->infoobject list-> no infoobject found
3)Tried after sometime ,but load continue to fail
Could anyone help to solve the problem
thanks
Bala

Hi Bala,
Check in SM12 if there are any locks exist with the change run number?
First check if there are any Master data loads running related to it?
Check in the Attribute change run screen if there are any change run steps are running?
Once after checking the above if no locks exist and no master data is running then check the below steps
1. Run RSA1 transaction
2. Tools -> Apply Hierarchy/Attibutes Change(or direct transaction RSATTR)... menu option
3. Click at "Monitor and Start terminated Change Runs" button (at the bottom of the screen)
4. Click "Reset Status" button at Run ID 465451241
NOTE: this is not recommended, to unlock the locks better to wait till the locks get relased.
If still the error message persists then we can use a FM in se37 in serious cases which was not recommended by SAP...
Use RSDDS_AGGR_MOD_CLOSE in se37 and execute--->there give ur failed change run no(465451241) beside I_CNSID and execute...
It releases all the locks by that change run....and continue with your further work/jobs...
Regards
KP

Error in process chain for PCA full load

Hello everyone,
I'm trying to use a process chain in order to delete a previous full load of plan data in a cube prior to the new load (to avoid double records). The successor job in the process chain is loading a delta of actual data into the same cube (same info source).
When executing the process chain (and the included info package (full load)), the setting "Automatic loading of similar/identical requests from info cube" in the info package is not working (I have ticked "full or init, data-/infosource are the same")...
I have checked that the function itself works as I have executed the info package manually with success. So the problem is the chain somehow.
In the chain I just execute the info package as usual... so to my understanding, it should work the same way as if I executed it manually. Or am I wrong? Is some additional setting required in the chain in order to make it work?
Any ideas?
Thanks,
Fredrik

Hi Fredrik,
not all settings in infopackages work in chains in the same way they do while running the package manually. Mostly you can check that with pressing F1 on the setting. In your case, you need to add a process type for deleting the data to the chain. In your chain maintenance, look at process types and then in load processes .... There you will find the type you need.
kind regards
Siggi

Errors when scheduling scenarios for agents using load balancing

Hi,
I have set up my ODI environment and have successfully manged to:
* run scenarios manually in development repository
* schedule scenarios and run on execution repository with one agent.
However when I try to set up a second agent to load balance the scenarios I get the following error below.
It seems to be a load balancing problem because I can run the scenario's successfully in every other case.
I am running an oracle RAC database. (2 servers, one oracle instance on each). I have set up one ODI agent on each server and I am trying to load balance between these 2 agents.
In topology I have set up 1 logical agent. Physical agent 1 is linked to itself and also to Physical Agent 2 under the load balancing tab.
For my scenario's I have 2 master scenarios (which are the ones scheduled) that call a number of other scenarios in the correct order.
Could anyone assist me please?
Thanks,
Matthew
Error:
====
java.lang.NullPointerException
     at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(Unknown Source)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(Unknown Source)
     at com.sunopsis.dwg.cmd.e.i(Unknown Source)
     at com.sunopsis.dwg.cmd.g.E(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpScen.a(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpScen.localExecuteSync(Unknown Source)
     at com.sunopsis.dwg.tools.StartScen.actionExecute(Unknown Source)
     at com.sunopsis.dwg.function.SnpsFunctionBaseRepositoryConnected.execute(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(Unknown Source)
     at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(Unknown Source)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(Unknown Source)
     at com.sunopsis.dwg.cmd.e.i(Unknown Source)
     at com.sunopsis.dwg.cmd.g.y(Unknown Source)
     at com.sunopsis.dwg.cmd.e.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)

Hi,
I'm wondering whether there may be a design flaw in the way our scenario's have been created / are executed.
Currently we have x number of scenarios executed by a x master scenario.
There are also y number of scenarios executed by a y master scenario.
These master scenarios are the ones scheduled against the agent and they call the "sub-scenarios".
We experience the above error when one of the "sub-scenarios" of a master scenario is executed on a different agent to where the master scenario is executed.
Any help greatly appreciated.
Thanks,
Matt

Error:No text defined for language ZF usage A appl V.cond type ZABC(T685T)

Hi Experts,
I have created a new condition type ZABC for discount correction and the pricing is working perfectly as required.
The issue is when I login using Chinese language ZF, then I get the below error in VA01-
No text is defined for language ZF usage A appl V.cond type ZABC(T685T).
I checked the table T685T, and condition type ZABC is not maintained for language ZF.
I tried maintaining the table but was unable to.
Can anyone of you please help me how to maintain these entries in table T685T.
I think this can be done through config route. Please help.
Thanks and regards,
Sheetal

Hi,
Goto the Transaction code SE16 and enter the table and click on CREATE and maintain the Langage and text for you condition type.
there is no direct maintenance view for this table.
regards,
santosh

Text in Text File Can't be Loaded into a TextArea

I am trying to do a very simple task: load the text contained in a text file to a TextArea. The file in question indeed exists.
Below is my code. I hope someone can point out why the TextArea remains empty.
TIA,
mlavie
The code:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute">
<mx:Script>
<![CDATA[
   protected function myButton_clickHandler(event:MouseEvent):void
    var file:File = new File();
    file.url = "file:///C:/myTextFile.txt";
    var fileStream:FileStream = new FileStream();
    fileStream.open(file, FileMode.READ);
    var fileText:String = fileStream.readUTFBytes(fileStream.bytesAvailable);
    fileStream.close();
    myTextArea.text = fileText;
]]>
</mx:Script>
<mx:Button x="116" y="193" label="Button" id="myButton" click="myButton_clickHandler(event)"/>
<mx:TextArea x="85" y="25" width="251" height="109" id="myTextArea"/>
</mx:Application>

Thanks - after I posted I realized that I misunderstood the forum hierarchy.
In any case, I solved it: I should have used "mx:WindowedApplication" instead of "mx:Application".

Text ID for text object BUT000 does not exist

Hi Experts.
I am doing data migration using LSMW with IDoc. I have this error message "Text ID for text object BUT000 does not exist" when processing the IDoc.
Can anyone tell me what is this error about and how could i fix it. A step by step guide would be nice. Really need advice urgently.
I'll definitely rewards points.
Regards,
Julianna

for this u need to maintain the text object and its related text id using the TC: SM31 in rel. view of ur tcode( like MM01, Va01 etc).
first get the view names(1 for text object and 2 for text id) from fun. people.
then go to sm31 with 1 view, create BUT000 .
then go to sm31 with 2 view, maintain text id for the text object:BUT000.

Machine freeze, timeout waiting for nf to load

my imac27 was randomly freezing requiring reboot, other times kernel panicking.
apple changed the logicboard after doing some diagnostics.
for a while it was fine -- then began freezing again.
console logs seem to show the following repeated kernel error
Timeout while waiting for nf to load: > AR_PHY_AGC_CONTROL=0x40d22
this is logged multiple times (2 dozen) before the system eventually freezes.
searching on this error -- seems to point to a network problem. either base station/WAP or wireless NIC in the imac, but i can't be sure and the details are still murky.
can anyone shed light here?

I have exactly the same problem.
Apple changed the bluetooth module, but the problem is still hier.
Someone has got a solution?

Aggregating data loaded into different hierarchy levels

I have some problems when i try to aggregate a variable called PRUEBA2_IMPORTE dimensinated by time dimension (parent-child type).
I read the help in DML Reference of the OLAP Worksheet and it said the follow:
When data is loaded into dimension values that are at different levels of a hierarchy, then you need to be careful in how you set status in the PRECOMPUTE clause in a RELATION statement in your aggregation specification. Suppose that a time dimension has a hierarchy with three levels: months aggregate into quarters, and quarters aggregate into years. Some data is loaded into month dimension values, while other data is loaded into quarter dimension values. For example, Q1 is the parent of January, February, and March. Data for March is loaded into the March dimension value. But the sum of data for January and February is loaded directly into the Q1 dimension value. In fact, the January and February dimension values contain NA values instead of data. Your goal is to add the data in March to the data in Q1. When you attempt to aggregate January, February, and March into Q1, the data in March will simply replace the data in Q1. When this happens, Q1 will only contain the March data instead of the sum of January, February, and March. To aggregate data that is loaded into different levels of a hierarchy, create a valueset for only those dimension values that contain data. DEFINE all_but_q4 VALUESET time
LIMIT all_but_q4 TO ALL
LIMIT all_but_q4 REMOVE 'Q4'
Within the aggregation specification, use that valueset to specify that the detail-level data should be added to the data that already exists in its parent, Q1, as shown in the following statement. RELATION time.r PRECOMPUTE (all_but_q4)
How to do it this for more than one dimension?
Above i wrote my case of study:
DEFINE T_TIME DIMENSION TEXT
T_TIME
200401
200402
200403
200404
200405
200406
200407
200408
200409
200410
200411
2004
200412
200501
200502
200503
200504
200505
200506
200507
200508
200509
200510
200511
2005
200512
DEFINE T_TIME_PARENTREL RELATION T_TIME <T_TIME T_TIME_HIERLIST>
-----------T_TIME_HIERLIST-------------
T_TIME H_TIME
200401 2004
200402 2004
200403 2004
200404 2004
200405 2004
200406 2004
200407 2004
200408 2004
200409 2004
200410 2004
200411 2004
2004 NA
200412 2004
200501 2005
200502 2005
200503 2005
200504 2005
200505 2005
200506 2005
200507 2005
200508 2005
200509 2005
200510 2005
200511 2005
2005 NA
200512 2005
DEFINE PRUEBA2_IMPORTE FORMULA DECIMAL <T_TIME>
EQ -
aggregate(this_aw!PRUEBA2_IMPORTE_STORED using this_aw!OBJ262568349 -
COUNTVAR this_aw!PRUEBA2_IMPORTE_COUNTVAR)
T_TIME PRUEBA2_IMPORTE
200401 NA
200402 NA
200403 2,00
200404 2,00
200405 NA
200406 NA
200407 NA
200408 NA
200409 NA
200410 NA
200411 NA
2004 4,00 ---> here its right!! but...
200412 NA
200501 5,00
200502 15,00
200503 NA
200504 NA
200505 NA
200506 NA
200507 NA
200508 NA
200509 NA
200510 NA
200511 NA
2005 10,00 ---> here must be 30,00 not 10,00
200512 NA
DEFINE PRUEBA2_IMPORTE_STORED VARIABLE DECIMAL <T_TIME>
T_TIME PRUEBA2_IMPORTE_STORED
200401 NA
200402 NA
200403 NA
200404 NA
200405 NA
200406 NA
200407 NA
200408 NA
200409 NA
200410 NA
200411 NA
2004 NA
200412 NA
200501 5,00
200502 15,00
200503 NA
200504 NA
200505 NA
200506 NA
200507 NA
200508 NA
200509 NA
200510 NA
200511 NA
2005 10,00
200512 NA
DEFINE OBJ262568349 AGGMAP
AGGMAP
RELATION this_aw!T_TIME_PARENTREL(this_aw!T_TIME_AGGRHIER_VSET1) PRECOMPUTE(this_aw!T_TIME_AGGRDIM_VSET1) OPERATOR SUM -
args DIVIDEBYZERO YES DECIMALOVERFLOW YES NASKIP YES
AGGINDEX NO
CACHE NONE
END
DEFINE T_TIME_AGGRHIER_VSET1 VALUESET T_TIME_HIERLIST
T_TIME_AGGRHIER_VSET1 = (H_TIME)
DEFINE T_TIME_AGGRDIM_VSET1 VALUESET T_TIME
T_TIME_AGGRDIM_VSET1 = (2005)
Regards,
Mel.

Mel,
There are several different types of "data loaded into different hierarchy levels" and the aproach to solving the issue is different depending on the needs of the application.
1. Data is loaded symmetrically at uniform mixed levels. Example would include loading data at "quarter" in historical years, but at "month" in the current year, it does /not/ include data loaded at both quarter and month within the same calendar period.
= solved by the setting of status, or in 10.2 or later with the load_status clause of the aggmap.
2. Data is loaded at both a detail level and it's ancestor, as in your example case.
= the aggregate command overwrites aggregate values based on the values of the children, this is the only repeatable thing that it can do. The recomended way to solve this problem is to create 'self' nodes in the hierarchy representing the data loaded at the aggregate level, which is then added as one of the children of the aggregate node. This enables repeatable calculation as well as auditability of the resultant value.
Also note the difference in behavior between the aggregate command and the aggregate function. In your example the aggregate function looks at '2005', finds a value and returns it for a result of 10, the aggregate command would recalculate based on january and february for a result of 20.
To solve your usage case I would suggest a hierarchy that looks more like this:
DEFINE T_TIME_PARENTREL RELATION T_TIME <T_TIME T_TIME_HIERLIST>
-----------T_TIME_HIERLIST-------------
T_TIME H_TIME
200401 2004
200402 2004
200403 2004
200404 2004
200405 2004
200406 2004
200407 2004
200408 2004
200409 2004
200410 2004
200411 2004
200412 2004
2004_SELF 2004
2004 NA
200501 2005
200502 2005
200503 2005
200504 2005
200505 2005
200506 2005
200507 2005
200508 2005
200509 2005
200510 2005
200511 2005
200512 2005
2005_SELF 2005
2005 NA
Resulting in the following cube:
T_TIME PRUEBA2_IMPORTE
200401 NA
200402 NA
200403 2,00
200404 2,00
200405 NA
200406 NA
200407 NA
200408 NA
200409 NA
200410 NA
200411 NA
200412 NA
2004_SELF NA
2004 4,00
200501 5,00
200502 15,00
200503 NA
200504 NA
200505 NA
200506 NA
200507 NA
200508 NA
200509 NA
200510 NA
200511 NA
200512 NA
2005_SELF 10,00
2005 30,00
3. Data is loaded at a level based upon another dimension; for example product being loaded at 'UPC' in EMEA, but at 'BRAND' in APAC.
= this can currently only be solved by issuing multiple aggregate commands to aggregate the different regions with different input status, which unfortunately means that it is not compatable with compressed composites. We will likely add better support for this case in future releases.
4. Data is loaded at both an aggregate level and a detail level, but the calculation is more complicated than a simple SUM operator.
= often requires the use of ALLOCATE in order to push the data to the leaves in order to correctly calculate the aggregate values during aggregation.

QM action not allowed for DTP requests in master data and Text tables

Hi,
I have a master data object load request which has failed, returned error in st22 and job finished.
BUT the request has not turned red in the monitor - it's still yellow. That means that I can not delete request nor start new load to infoprovider because it believes a request is still running. But it's not, I've checked both sm37, sm50 etc.
When trying to manually change QM status to 'red' it says 'QM action not allowed for DTP requests in master data and Text tables'
How can I force QM status to red so that I can move on?
Running NW2004s BI (7.0) Patch 15.
I searched for this question but there is no answer
Thank you

Folks
I know how frustrating this problem is even in netweaver 7.0 environment. I found a solution for this problem atlast and it works but a not direct way of resolving this issue.
When this request is in yellow status and not able to change / delete the request, its actually in a pseudo status and it is a bug in the program. This request sits in table RSBKREQUEST with processing type as 5 in data elements USTATE, TSTATE and this 5 is actually "Active" status which is obviously wrong.
All we need is, ask your basis person to change the status to 3 in both these data elements and then it allows to reload the delta. Once the delta is successfully loaded, you can delete the previous bad request even though it is still in yellow. Once the request is deleted, the request status gets updated as "4" in table RSBKREQUEST.
Hope this helps.
Thanks

Unable to install SQL Server Express 2008 R2 - Errors "Failed to retrieve data for this request"

As domain admin I am attempting to install "SQL Server 2008 R2 with SP2" but it keeps failing with "Failed to retrieve data for this request".
The installation never actually starts, it errors before then.
It displays the same error even if I run the System Configuration Checker.
The summary.txt for the install displays the following text:
Overall summary:
Final result:                  Failed: see details below
Exit code (Decimal):           -1554760125
Exit facility code:            852
Exit error code:               15939
Exit message:                  Failed to retrieve data for this request.
Start time:                    2014-08-15 16:49:52
End time:                      2014-08-15 16:50:06
Requested action:              RunRules
Machine Properties:
Machine name:                  servername
Machine processor count:       8
OS version:                    Windows Server 2008 R2
OS service pack:               Service Pack 1
OS region:                     United States
OS language:                   English (United States)
OS architecture:               x64
Process architecture:          64 Bit
OS clustered:                  Yes
Product features discovered:
Product              Instance             Instance ID
Feature                                  Language
Edition              Version         Clustered
Package properties:
Description:                   SQL Server Database Services 2008 R2
ProductName:                   SQL Server 2008 R2
Type:                          RTM
Version:                       10
SPLevel:                       1
Installation location:         c:\84122ef5b6d9cdcd3b2ac48cec\x64\setup\
Installation edition:          EXPRESS
User Input Settings:
ACTION:                        RunRules
CONFIGURATIONFILE:
ENU:                           True
FARMACCOUNT:                   <empty>
FARMADMINPORT:                 0
FARMPASSWORD:                  *****
FEATURES:
HELP:                          False
INDICATEPROGRESS:              False
INSTANCENAME:                  <empty>
PASSPHRASE:                    *****
QUIET:                         False
QUIETSIMPLE:                   False
RULES:                         GLOBALRULES,SqlUnsupportedProductBlocker,PerfMonCounterNotCorruptedCheck,Bids2008InstalledCheck,BlockInstallSxS,AclPermissionsFacet,FacetDomainControllerCheck,SSMS_IsInternetConnected,FacetWOW64PlatformCheck,FacetPowerShellCheck
UIMODE:                        AutoAdvance
X86:                           False
Configuration file:            C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140815_164944\ConfigurationFile.ini
Detailed results:
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file:               The rule result report file is not available.
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
    Message:
        Failed to retrieve data for this request.
    Data:
      HelpLink.ProdName = Microsoft SQL Server
      HelpLink.BaseHelpUrl = http://go.microsoft.com/fwlink
      HelpLink.LinkId = 20476
      DisableWatson = true
    Stack:
        at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
        at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
        at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String machineName)
        at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath, String clusterDiscoveryDocRootPath)
        at Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String actionId)
        at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
        at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    Inner exception type: Microsoft.SqlServer.Configuration.Sco.SqlRegistryException
        Message:
                The network path was not found.
        Data:
          WatsonData = [email protected]rror
        Stack:
                at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.CreateBaseKey(ServiceContainer ctx, String machineName, IntPtr hKey, String keyName, RegistryAccess access, RegistryView
view)
                at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocalMachine(ServiceContainer ctx, String machineName, RegistryAccess access, RegistryView view)
                at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String machineName, RegistryView regView)
                at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
                at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
                at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
                at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
                at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)

    Inner exception type: Microsoft.SqlServer.Configuration.Sco.SqlRegistryException
        Message:
                The network path was not found.
        Data:
          WatsonData = [email protected]rror
Above message says that your registry is not consistent and some of the parameters are missing from registry.Or
Account installing SQL server does not have permission to access this. I think case can be here that account with which you logged into your system to install SQL Server might not have certain privileges. Can you take help
of domain admin account add it as a local administrator in this machine always right click on setup file and select run as administrator. Before this make sure you remove all SQL Server components from add remove program
I strongly recommend you to have a good look at below thread
http://support.microsoft.com/kb/2000257/en-us
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

ERROR(No text fould) for a request loaded into InfoProvider.

Similar Messages

Maybe you are looking for