Error " No working/operating time maintained in work center for scheduling"

Hello Friends,
When i am scheduling the planned order than in scheduling log, system throwing the error "No working/operating time maintained in work center for scheduling".
Message no. C7014
But in workcenter, i have attached the grouping and in interval and shift for the available capacity 1, i have maintained the shifts.
According i can see the capacity on that workcenter in CM01.
Same error i am getting when i am scheduling the routing and check the scheduling log.
Regards,
Jitendra.

Hi
Have u checked , to maintain the time required to perform the activity in the work-center?
please check, i think, we have to maintain for each activity type.
regards,
rasika

Similar Messages

Advanced Action works 2 times and stops working

Hi Everyone,
I'm creating a Captivate 4 (4.0.1 Build 1658) presentation of a simple LAN setup with 2 hosts. I have a caption showing setup parameters for the hosts (IP and Hostname) and a dropdown box allowing for selection of which host to configure parameters in the upper right (screenshot below).
My advanced action executes when the submit button next to the IP field is clicked (Host Name will be next once I figure this little issue out). It checks which host is selected in the dropdown widget and assigns the IP address (HostIP) to the respective host.
As the subject states, this works 2 times and then stops working. Here is the code:
Check If ( HostSelection is equal to Host 1 )
     begin
          Host1IP := HostIP
          rdcmndGotoFrame := 20
     end
Or Else
     begin
          Host2IP := HostIP
          rdcmndGotoFrame := 30
end
The rdcmndGotoFrame assignment seems to be the only way I can reliably pause the presentation after the button is clicked. Not sure if this is contributing to the problem or not.
I've done this type of thing before but I can't figure out why this isn't working. Any help would be greatly appreciated.

Hello,
To keep the playhead from moving on, use the expression:
rdcmndGotoFrame = rdinfoCurrentFrame -1
Sometimes the -1 is not necessary, you will have to check yourself. I do not know why you choose the absolute frame numbers to go to. And I do not really catch the issue for the rest.
Lilybiri

Burning a new CD-RW works first time, doesn't work after erase

Hello all,
My problem has a little twist that I couldn't find a solution to after spending a
few hours digging in all the forums.
I have never been able to re-use a stack of Sony CD-RW disks (p/n CDRW650L
rated for 1X, 2X, and 4X drives).
I can burn them fine the first time but doing an erase renders them unuseable.
I've been using a utility called CD-Erase that came bundled on this iMac G4.
I recently learned that I can (should?) erase from the Disk Utility app -
however, this didn't work either.
Is there a known list of incompatible CD-RW 's ?
I have yet to try another mfgr since I ASSUME I can trust name brands,
especially if the CD-RW and the drive are both made by Sony.
Details of my internal drive:
Manufacturer: SONY
Model: SONY DVD RW DW-U10A
Revision: A43h
Serial Number: EA59142B
Drive Type: CD-RW/DVD-RW
Disc Burning: Apple Supported/Shipped
Removable Media: Yes
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Thanks in advance,
Craig
iMac G4 17-inch flat panel Mac OS X (10.3.9) DSL
iMac G4 Mac OS X (10.3.9) DSL

I'm unfamiliar with the disc erase utility you mention; and it may be
partially responsible for the results you are getting. Have you tried
other disc recording utilities to see if you can get better results?
The only one I've tried, and it worked successfully to erase and record
on a previously used CD-RW (the first disc I've burned) was an easily
used disc recording utility called "Burn 1.6u" and there may be a newer
version of this out, now. Seems to me I checked and found a link online
again to get a newer version from the source: http://burn-osx.sourceforge.net/
Hope this helps; and if it does, please post back. Could be the issue is
only in the erase cd utility you have. It may be making mistakes.

At times my password for iCloud does work every time but it works fine on my iPad

I have changed my apple i/d password around 6 times trying to solve this problem .iCloud and keychain works fine on my ipad but not no my mac.
it keeps asking for the password for different areas mail/contacts/keychain etc.

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

Face time will not work, face time will not work

I just purchased an Apple computer and I am not receiving the verification e-mail from Apple to active Face Time.

• If you have not already tried it, restart your Mac and test again.
• If the trouble continues, Apple's http://support.apple.com/kb/HT2090
suggestions may help you. The proper "reset" suggested there for your
particular Mac model or changing to a new user may restore normal function.
(Over time, Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD." Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
Message was edited by: EZ Jim
Mac OSX 10.8.4

My 2007 iMac 24" now retired as working machine but serves as entertainment center for granddaughters and me, 'attacked' while on Youtube and cannot start up. In need of first aid to get it going again...

My 2007 iMac 24" attacked' while on Youtube and cannot start up. I need first aid to get it going again...
True, it's retired as working machine but serves as family entertainment center.

At this point you have 2 choices.
Erase the disk entirely and reinstall (you will lose everything that is not backed up)
Take it to an Apple Store (you will probably lose everything that is not backed up)
I believe this is a hardware (HDD) issue and would expect a Store trip to be the best approach, sorry.
BUT
Did you try a safe mode start?

Can we maintain separate Profit center for each Storage location?

Dear Friends
My Org structure is like below:
We have 10 profit centers, one plant and 5 storage locations.
Now my requirement is these 5 storage locations belog to 5 different profit centers.
Can we assign different profit center for each storage location?
Regards
Kiran A

Dear Mehmet Gunenc
It is not happening because the profit center area is defined as General plant parameters. It is denoting the Profit Center is at Plant level and not at storage location level.
Please check it.
Regards
Kiran

Operating time error in work center

while creating production order, i am getting the below error
"No working/operating time maintained in work center for scheduling"

Hi,
Check following thing,
1.Check whether you have maintained time in capacity tab.
2.Check scheduling tab formulas.
3.Check in control key whether scheduling has been activated.
The error shows below message
C7014 - No working/operating time maintained in work center for scheduling - C7 014
Vendor Master (General Section) General Material Data
This documentation is copyright by SAP AG.
Diagnosis
No operating time has been defined for the work center specified in the operation.
System Response
Scheduling is carried out on the basis of an operating time from 00:00 hours to 24:00 hours.
Procedure
Maintain the operating time in the work center.
So maintain correct time in capacity tab
Regards / US
Edited by: Umashankarpmgl on Jan 20, 2012 2:58 PM

My lenovo G505s shuts down suddenly and key board stops working at times

Hi,
I have bought this laptop 10 days ago, I am facing two problems 1st is, it shuts down(suddenly off not proper shut down) while working without showing any error message, and the problem no 2 is its key board stops working at times, system is working fine but all the buttons of key board are not responding. it will work when I restart the system.
please help what should I do, could it be replaced?

Welcome to the Lenovo Community !
Sorry to hear of your problems. I would suggest that you try a reset of the BIOS just to rule out any hardware conflicts the system may have. Try this........
1. Unplug the charger / adapter.
2. Remove the battery.
3. Press and hold the Power Button for 15 seconds.
4. Re-install the battery, plug in the charger / adapter if needed and power up the system to see if the problem was resolved.
If the problems weren't resolved by doing the reset then I suggest you contact Lenovo Support for warranty service. Both the problems you mentioned could be related to faulty hardware and the service center would be best equipped to check out your new laptop. You can find the phone number for Lenovo Support in your country or area by using the link below....
http://support.lenovo.com/us/en/supportphonelist_alt1
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

HHelp can't sync Calendar. It hangs with error -"403" to operation CalDAVMigrateToServerQueueableOperation

HHelp can't sync Calendar. It hangs with error -"403" to operation CalDAVMigrateToServerQueueableOperation

Hello, workhorse.
Thank you for visiting Apple Support Communities.
Try removing the preference to sync calendar events in iCloud preferences. Once this is done enable the preference again and see if this resolves the issue.
Turn iCloud Calendars off and back on:
Quit Calendar (or iCal).
Choose Apple () menu > System Preferences, then select iCloud.
Deselect the checkbox next to Calendars.
Close System Preferences and wait about a minute.
Open System Preferences and select iCloud.
Replace the checkmark next to Calendars.
Close System Preferences.
Open Calendar (or iCal) and test to see if the issue is resolved.
Restart your computer. This may sound simple, but it reinitializes your network and application settings and can frequently resolve issues.
If the issue persists, try all remaining steps in the article below.
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/TS3999
Regards,
Jason H.

Cannot perform operation. 'RUL-01527: Received exception for loadClass.

After first hurdle of adding the schema, now I am faced with another problem. It does not load. I guess there are no classes in the dirctory that it had created.
Can someone help?
Here is the dump of the error
oracle.rules.sdk.exception.RulesSDKException: RUL-01527: Received exception for loadClass. at oracle.rules.sdk.mapper.RuleObjectHelper.loadJaxbClassOrPackage(RuleObjectHelper.java:2983) at oracle.rules.ra.uix.mvc.SchemaSelectorEH.importSchema(SchemaSelectorEH.java:213) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at oracle.rules.ra.uix.mvc.BeanEH.genericHandleEvent(BeanEH.java:869) at oracle.rules.ra.uix.mvc.BeanEH.handleEvent(BeanEH.java:838) at oracle.cabo.servlet.event.TableEventHandler.handleEvent(Unknown Source) at oracle.cabo.servlet.event.TableEventHandler.handleEvent(Unknown Source) at oracle.cabo.servlet.event.BasePageFlowEngine.handleRequest(Unknown Source) at oracle.cabo.servlet.AbstractPageBroker.handleRequest(Unknown Source) at oracle.cabo.servlet.ui.BaseUIPageBroker.handleRequest(Unknown Source) at oracle.cabo.servlet.PageBrokerHandler.handleRequest(Unknown Source) at oracle.cabo.servlet.UIXServlet.doGet(Unknown Source) at javax.servlet.http.HttpServlet.service(HttpServlet.java:743) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64) at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:436) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368) at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448) at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595)

I was importing the package that was created i.e. the top level directory.
I also tied to import each element bu I get similar error
Cannot perform operation. 'RUL-01527: Received exception for loadClass. RUL-01012: Unable to add JAXB class ecws.Event into the data model. Please make sure the class is in class path. Root Cause: ecws.Event '
oracle.rules.sdk.exception.RulesSDKException: RUL-01527: Received exception for loadClass. RUL-01012: Unable to add JAXB class ecws.Event into the data model. Please make sure the class is in class path. Root Cause: ecws.Event at oracle.rules.sdk.mapper.RuleObjectHelper.loadJaxbClassOrPackage(RuleObjectHelper.java:2983) at oracle.rules.ra.uix.mvc.SchemaSelectorEH.importSchema(SchemaSelectorEH.java:213) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at oracle.rules.ra.uix.mvc.BeanEH.genericHandleEvent(BeanEH.java:869) at oracle.rules.ra.uix.mvc.BeanEH.handleEvent(BeanEH.java:838) at oracle.cabo.servlet.event.TableEventHandler.handleEvent(Unknown Source) at oracle.cabo.servlet.event.TableEventHandler.handleEvent(Unknown Source) at oracle.cabo.servlet.event.BasePageFlowEngine.handleRequest(Unknown Source) at oracle.cabo.servlet.AbstractPageBroker.handleRequest(Unknown Source) at oracle.cabo.servlet.ui.BaseUIPageBroker.handleRequest(Unknown Source) at oracle.cabo.servlet.PageBrokerHandler.handleRequest(Unknown Source) at oracle.cabo.servlet.UIXServlet.doGet(Unknown Source) at javax.servlet.http.HttpServlet.service(HttpServlet.java:743) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64) at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:436) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368) at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448) at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595)

Every time I TRY to start firefox 18-19 I get an error message : Firefox has stopped working - close the program and check online for a solution - or - close ..

Every time I TRY to start firefox 18-19 I get an error message : "Firefox has stopped working" - "close the program and check online for a solution" - or - "close the program" this happens TWICE every time I try to start firefox. Eventually after a random number of tries firefox will start normaly. I am useing firefox 19.0.2 now bit I belive it started when I upgraded to firefox 18 but am not sure, it might have been when I upgraded to firefox 19 ... but it has been happening for a very long time and I cannot find any helpfule solutions online.
I have tried a Clean reinstall but it did not help.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Every time I TRY to start firefox 18-19 I get an error message : Firefox has stopped working - close the program and check online for a solution - or - close th

Every time I TRY to start firefox 18-19 I get an error message : "Firefox has stopped working" - "close the program and check online for a solution" - or - "close the program" this happens TWICE every time I try to start firefox. Eventually after a random number of tries firefox will start normaly. I am useing firefox 19.0.2 now bit I belive it started when I upgraded to firefox 18 but am not sure, it might have been when I upgraded to firefox 19 ... but it has been happening for a very long time and I cannot find any helpfule solutions online.

Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!

Hi, My face time is not working properly in my computer and mi iPhone, some of the people that i used to contact a can't talk to anymore, and some i can. Its not working in my mac nor in my iPhone, it just shows legend that says face time error

Hi, My face time is not working properly in my computer and mi iPhone, some of the people that i used to contact a can't talk to anymore, and some i can. Its not working in my mac nor in my iPhone, it just shows legend that says face time error, what can i do???

Assign an email address (gmail.com?)
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

Adobe Photoshop CC worked one time? Now get Problem Report Error?

Adobe Photoshop CC worked one time? Now get Problem Report Error? tried for 3 days to get working... Help! please

I dug a wee bit deeper and thanks to
Sami Vuoritie 1 month ago
I was able to fix it. In Filebrowser-view I had a coverflow-preview mode on. Changing it to list-mode problems are gone!
hope this works for you M00ch?

Error " No working/operating time maintained in work center for scheduling"

Similar Messages

Maybe you are looking for