"Error: Not able to connect to search service to retrieve valid settings" from CHange Query under search criteria
Hi Everyone,
I might made a big mistake by clicking Stop then Start action to "SharePoint Server Search" under "Services on Server" from Central Administrator. Then all my search results have error messages. I did reset Index and start
all crawls. It didn't work. Please Help.
Thanks.
Miranda
Here is the picture under search page
Hello Rk_muddala,
I had a customer case where we got the same user friendly error in the Search Service Application of the Central Administration. When we looked at the ULS we got the following error:
Exception in Query Builder OnLoad: System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: Attempted to perform an unauthorized operation.
In our case it was because the user that was launching the Query Builder wasn't Administrator of the Search Service Application. Overhere is an Technet article how you can add an administrator:
http://technet.microsoft.com/en-us/library/ee704546(v=office.15).aspx
- Dennis | Netherlands | Blog |
Twitter
Similar Messages
-
not able to see ikm oracle incremental update and ikm oracle slowly changing dimensions under PHYSCIAL tab in odi 12c
But i'm able to see other IKM's please help me, how can i see themNope, It has not been altered.
COMPONENT NAME: LKM Oracle to Oracle (datapump)
COMPONENT VERSION: 11.1.2.3
AUTHOR: Oracle
COMPATIBILITY: ODI 11.1.2 and above
Description:
- Loading Knowledge Module
- Loads data from an Oracle Server to an Oracle Server using external tables in the datapump format.
- This module is recommended when developing interfaces between two Oracle servers when DBLINK is not an option.
- An External table definition is created on the source and target servers.
- When using this module on a journalized source table, the Journaling table is first updated to flag the records consumed and then cleaned from these records at the end of the interface. -
Not able to connect to Data service on Airtel
Hi!
I have a nokia Lumia 800 handset with airtel as service provider, I activated their GPRS data service (read edge) and I am not able to connect to internet, however earlier I had Vodafone and I never faced such issues with it, I have tried out every possible solution in book i.e.
1. Set Apn to airtelgprs.com
2. Using Nokia network setup app.
3. restarting my phone several times .
Nothing seem to work has anyone faced such issue if yes could you please help me.Have you contacted Airtel to make sure every thing is working and activated their end?
-
DAC not able to connect to Informatica services
Hi All,
I have an issue in connecting DAC with Informatica. In this scenario Informatica Server and DAC server in installed in Linux machine and Informatica Client and DAC client in Windows. I have given all configurations required. But DAC not able to communicate with Informatica and throwing below error for Testing to connect with Informatica Repository
Failure connecting to "INFORMATICA_REP_SERVER"!
ANOMALY INFO::: Error while pinging informatica repository server
MESSAGE:::/u01/oracle/DAC/log/pmrepConnect.log (No such file or directory)
EXCEPTION CLASS::: java.io.FileNotFoundException
java.io.FileInputStream.open(Native Method)
java.io.FileInputStream.<init>(FileInputStream.java:106)
java.io.FileInputStream.<init>(FileInputStream.java:66)
com.siebel.etl.functional.ReadFileToBuffer.readFileToBuffer(ReadFileToBuffer.java:39)
com.siebel.analytics.etl.infa.interaction.PmrepInvoker.pmrep(PmrepInvoker.java:100)
com.siebel.etl.gui.data.StaticDatabaseCalls.testRepositoryServer(StaticDatabaseCalls.java:959)
com.siebel.etl.gui.data.StaticDatabaseCalls.testInformaticaServer(StaticDatabaseCalls.java:890)
com.siebel.etl.net.ExecutionPlan.getInformaticaStatus(ExecutionPlan.java:275)
com.siebel.etl.net.ClientMessageDispatcher$WorkerThread.mBeanRequestInformaticaStatus(ClientMessageDispatcher.java:433)
com.siebel.etl.net.ClientMessageDispatcher$WorkerThread.consoleMessage(ClientMessageDispatcher.java:224)
com.siebel.etl.net.ClientMessageDispatcher$WorkerThread.run(ClientMessageDispatcher.java:144)
For Integration services also showing as
Failure connecting to "INFORMATICA_INT_SERVER"!
I have set path variables and added "InformaticaPowercenterClient\Client\bin". Also copied pmcmd.exe from "Informatica\Server\bin". Here i would mention that i have installed Informatica Services in Windows and copied pmcmd.exe from there as mentioned in oracle documents. Now i am able to ping pmcmd as pmrep. Please suggest me if anyone having any solutions.
Thanks
BKSFor Informatica, I believe you have to run the Linux installer on linux, not on Windows. There is a component for which you need to run the Windows installer and move the files to linux but the INFA server install itself much be run on Linux if you are using Linux as your INFA server.
-
Not able to connect ot Blackberry services
Hi ! when i try to create blackberry internet services account, i get following message : "Your account has been suspended. Please contact the system administrator."
I am not able to get into EDGE network.
please helpConfirm that it is unlocked:
http://www.blackberryfaq.com/index.php/How_do_I_determine_if_my_BlackBerry_is_%22unlocked%22%3F
http://www.blackberryfaq.com/index.php/Buying_a_BlackBerry_off_eBay
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
ABAP Proxy configuration Error (Not able to connect R/3 to IB )
Hello All...
I am trying to configure the connection from R/3 to XI using the ABAP proxy generation.For that I have followed the steps given in the below blog
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
We created all the credentials required for the XI and R/3 side configuration and its working fine individually when we have tested for the connection and also assigning this at SXMB_ADM,but in integration engine configuration,when I am trying with the URL <b>dest://<RFC destination(http</b>).Its giving error and in sproxy at R/3 its giving that no integration engine is connected to Business system.
Whats worng with my configuration.How can I resolve this.
I am having R/3 system WAS 6.40Hi,
<i>But when I am giving the path prefix as you have specified I am getting an Error Query String Not Allowed.</i>
I think thats the warning not error. Just press enter again and go to the logon detail Tab and give the userid password
<i>And how can give the SLD details using the SLDAPICUST.</i>
go to transaction SLDAPICUST and give the following details:
Alias name :any name u want
Prim: check this box
Hostanme: give the Hostname where your SLD (XI server name if you are using the XI SLD)
PORT: Java Port
UserId/Password: for XIAPPLUSER
I think you are missing on the configuration. I think its better if you go through the weblog again.
Regards
Vijaya -
Ora-12523 error-not able to connect wid database
hi ,
my name is varun
i am using oracle 9i on window xp
my clint and server r on same machine
i was working on the database with a non-sys user
suddenly i got one errror
tns packet faliue
then after that
ORA-12523: TNS:listener could not find instance appropriate for the client
connection
could u plz help me out and resolve this problem
thanx in advanceVarun,
There is no problem with listener registration, problem is with the database processes (allowed connections). If the max number of processes allowed is reached, pmon doesnt allow any new connection from listerner. that the root cause for this problem.
Fix:
Increase the number of process in init<SID>.ora to higher value and restart database.
1. edit the file D:\oracle\ora92\database\initdb01.ora
Processes=200 ----- any higher value required
2. login as sysdba Shutdown the database -----
3. startup database -----
SQL> startup pfile=D:\oracle\ora92\database\initdb01.ora
Regards
Vignesh Bala
Message was edited by:
Vignesh Bala -
CISCO Aironet access point - not able to connect by user.
Hi,
I have CISCO Aironet access point C1130 in my network , but not able to connect by users, I can see below logs from access point. please help on this.
Jun 13 17:50:10.686: RADIUS: no sg in radius-timers: ctx 0x10653F8 sg 0x0000
Jun 13 17:50:10.686: RADIUS: Retransmit to (20.33.100.11:1645,1646) for id 1645/247
Jun 13 17:50:15.678: RADIUS: no sg in radius-timers: ctx 0x10653F8 sg 0x0000
Jun 13 17:50:15.678: RADIUS: Retransmit to (20.33.100.11:1645,1646) for id 1645/247
Jun 13 17:50:20.544: RADIUS: no sg in radius-timers: ctx 0x10653F8 sg 0x0000
Jun 13 17:50:20.544: RADIUS: Retransmit to (20.33.100.11:1645,1646) for id 1645/247
Jun 13 17:50:24.832: RADIUS: no sg in radius-timers: ctx 0x10653F8 sg 0x0000
Jun 13 17:50:24.832: RADIUS: Retransmit to (20.33.100.11:1645,1646) for id 1645/247
Jun 13 17:50:29.741: RADIUS: no sg in radius-timers: ctx 0x10653F8 sg 0x0000
Jun 13 17:50:29.741: RADIUS: Fail-over denied to (20.33.100.11:1645,1646) for id 1645/247
Jun 13 17:50:29.741: RADIUS: No response from (20.33.100.11:1645,1646) for id 1645/247
Jun 13 17:50:29.741: RADIUS/DECODE: No response from radius-server; parse response; FAIL
Jun 13 17:50:29.741: RADIUS/DECODE: Case error(no response/ bad packet/ op decode);parse response; FAIL
Jun 13 17:50:29.741: dot11_auth_dot1x_parse_aaa_resp: Received server response: FAILOVER_RETRY
Jun 13 17:50:29.742: dot11_auth_dot1x_parse_aaa_resp: found eap pak in server response
Jun 13 17:50:29.742: Client 5864.6c67.3718 failed: EAP reason 0
Jun 13 17:50:29.742: dot11_auth_dot1x_parse_aaa_resp: Failed client 5894.6b37.3518 with aaa_req_status_detail 0
Jun 13 17:50:29.742: dot11_auth_dot1x_run_rfsm: Executing Action(SERVER_WAIT,SERVER_FAIL) for 5894.6b37.3518
Jun 13 17:50:29.742: dot11_auth_dot1x_send_response_to_client: Forwarding server message to client 5894.6b37.3518
Jun 13 17:50:29.742: dot11_auth_dot1x_send_response_to_client: Started timer client_timeout 30 seconds
Jun 13 17:50:29.743: dot11_auth_dot1x_send_client_fail: Authentication failed for 5894.6b37.3518
Jun 13 17:50:29.743: %DOT11-7-AUTH_FAILED: Station 5894.6b37.3518 Authentication failed
Regards,Hi Niham,
You can try few things to troubleshoot this -
1. check the reachability of Radius server from your wlc (ping).
2. verify the IP address of Raduis server configured on wlc.
3. wlc in the Radius server ?
4. Shared Secret must be same on wlc and in raduis server.
Plz do not forget to rate useful post.
Thanks -
Am not able to connect to whatsup
Am not able to connect with whats up
Check your Wi-Fi settings as well as your Cellular settings. By the way, did you mean WhatsApp?
-
The search service is not able to connect to the machine that hosts the administration component
Hi
After uninstalling the binaries, and reinstalling / joining back to the farm, everything seems happy expect search.
When we try and start the Search Service back, it takes us to the Search Application section, and shows this message;
The search service is not able to connect to the machine that hosts the administration component
How can I get search to work again, or get around this error?
I am pretty inexperienced with SearchHi Tibsy80,
For your issue, it can be caused by the search admin timer job was disabled.
Run below PS command to know the status:
Get-SPTimerJob job-application-server-admin-service | fl
If it returns “IsDisabled: True”, ran below PS command to enable the service:
Enable-SPTimerJob job-application-server-admin-service
Then run below PS command to stop and start the timer and IIS reset:
Net Stop timer
Net start timer
iisreset
Then wait 1-2 min and try browsing to the SSA again.
Reference:
http://neelb.wordpress.com/2012/01/19/the-search-service-is-not-able-to-connect-to-the-machine/
Also you can refer to the blogs:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/b04498ec-78d1-4bb9-8077-0481977cef10/the-search-service-is-not-able-to-connect-to-the-machine-that-hosts-the-administration-component?forum=sharepointadminprevious
http://davidbajak.com/blog/post/2011/09/29/Fix-SharePoint-2010-Enterprise-Search-After-Using-AutoSPInstaller-Script-Installer.aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support -
Reporting Services not able to connect with sharepoint
HI
We have a Sql server instance where we are not able to install reporting services, so what we have done is we have created one more sql server instance on the same server with reporting services.
When we configured reporting services in sharepoint integrated mode and try to connect that web service url in sharepoint we are getting an error in sharepoint central administartion that not able to connect to the reporting services.
Request you to throw some light on the same.
Thanks
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.Hi Geeth,
Based on the limited information, I am not very clearly about you issue. In order to solve the problem more efficiently, I need to clarify some information. Could you post more detail information about “try to connect that web service url in sharepoint we
are getting an error in sharepoint central administartion”? For example, the detail steps about the action, the screenshot of the action, and what error message you received. I’m not sure which step are you trying to do. And could you tell me the edition of
your SQL Server and SharePoint? It is benefit for us to do further analysis.
References:
2008 R2:
http://technet.microsoft.com/en-us/library/bb283190(v=sql.105).aspx
http://sharepointtaskmaster.blogspot.in/2010/11/intergration-reporting-service-with.html
http://technet.microsoft.com/en-us/library/bb326213(v=sql.105).aspx
2012:
http://technet.microsoft.com/en-us/library/47efa72e-1735-4387-8485-f8994fb08c8c
http://denglishbi.wordpress.com/2011/07/22/configuring-sql-server-denali-reporting-services-sharepoint-2010-integration/
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Hi friends,
Getting the below error in step 10 (configuration check) in managed system configuration.
The SMD Agent is not able to connect the Satellite System (J2EE stack).
Please check the JAVA Connect Parameters provided in the Managed System Setup Wizard for this
System.
java.rmi.RemoteException.P4 Connection failed -
P4AuthorizationException -
com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException:
Access is denied to SAP System sid [XYZ/null]: check the connection
credentials.More details about the error in agent 'xyz' log file
(SMDAgentApplication.X.log).; nested exception is:
com.sap.engine.services.security.exceptions.BaseLoginException: Cannot
authenticate the user.
The SMD log file referred to in the log above gives the same information and not anything much useful.
Any idea what could be the reason for the above error?
Thanks,
ArindamHi All,
Thaks for your suggestions. I chcked the note 182020, but the issue described in the note is for error byte code adapter installation whcih is not my case. The byte cde adapter intallation has been successful in our solman system All the steps from 1 to 9 are green. Only in step 10, check cniguration I am getting the above error.
The logon test wth the user id in step 3 "Enter system parameters" is successful. The message server port is also correct.
Hi Khaja,
I went to the links as suggestedby you but there its about a ifferent error message "Invalid Response Code: (401) Unauthorized.". I am not getting any such kind of error.
All I am getting is this -
The SMD Agent is not able to connect the Satellite System (J2EE stack).
Please check the JAVA Connect Parameters provided in the Managed System Setup Wizard for this System.
java.rmi.RemoteException.P4 Connection failed -
P4AuthorizationException -
com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException:
Access is denied to SAP System sid [XYZ/null]: check the connection
credentials.More details about the error in agent 'xyz' log file
(SMDAgentApplication.X.log).; nested exception is:
com.sap.engine.services.security.exceptions.BaseLoginException: Cannot
authenticate the user.
Thanks,
Arindam -
Hi,
I am not able to connect my iPhone 4s to my Macbook Air. There is constant audio alert and the iTunes error message says" ITunes could not connect to this phone. The device is no longer connected. I have been connecting with our any problem to my Windows Laptop (Win7) but get this error message on the recently purchased MacBook Air.
Request a solution. Best wishes,
AshokceeLaunch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
I am not able to connect with Itunes Match. I constantly receive the message error 4010
I am not able to connect with Itunes Match. I constantly receive the error 4010.
I can run the general "Update iTunes Match" from the menu but cannot add individual tracks by right-clicking (control-clicking) on them the way I usually do. Then I get the 4010 error message.
Based on other posts here, I can assume the problem is not just me. -
When trying to connect itunes to store, error (-3212) appear and not able to connect itunes
iTunes has been denied by your firewall. Add iTunes to your firewall allowed list.
Maybe you are looking for
-
'Alt' with + or - doesn't work
The adjustment increment of several of the sliders is supposed to be reduced by holding the Alt key down while the + or - key. This doesn't work on my system. I've tried tested both Alt keys with both + and - keys on my keyboard. No luck. All I get i
-
Javascript variable names in strings
This should be easy, but i can't find any info on how to do it! It's easy to put the contents of a variable into a string but how does one place the name of a Javascript variable into a string?? The only solution i have found is to store the name sep
-
Why does the internal memory shows red?
When I connect my iPhone to my computer and I go into the phone itself, the internal memoy bar is in red and shows that I have a little over 1 gig of memory left. Why is it in red? Hasn't been that way except for the last week?
-
WM and long table incl.spatial geometry?
Hi all, KMS maintains the Danish Cadastre of land parcels, currently utilizing Oracle 8.1.7 in conjunction with a GIS system storing the graphics. In the near future the DataBase and all applications are to be rewritten in order incorporate all the g
-
Corrupted project file. "An unknown error has occurred" help!
Hi everyone, have been working on a wedding video for 5 days straight and sdude my an error forced the app to close. After attempting to reopen the project an error message has popped up: "an unknown error has occurred" and closed the app again. Ate