Error "Not all data could be changed in LC" when running DP macro

We are getting the error, "Not all data could be changed in LC" when running DP macros and we are not sure why. It seems to only happen when we are executing it via a Process Chain but not using the DP background processing scheduling. Does anyone know why this is happening?

Hi Stacy,
I hope you are seeing this in message spool. This message comes up for various reasons. We used to see a message saying "No data saved".
Some of the reasons could be " the new value (lets say 3 ) after the macro execution is same as after execution (3)".
See if some of the values are fixed and could not be changed.
I would take a selection id with just few values and execute the job for that selection id and compare the pre and after results. That should answer all your questions.

Similar Messages

Not all data could be changed in LC (Message no. /SAPAPO/TS007)

Hi Experts,
When I run forecasting through automodel(strategy 56) in the background, For some combinations I got the warning message "Not all data could be changed in LC" (Message no. /SAPAPO/TS007). What does this message means?
Thanks & Regards
Yogeesha

Hi
Logically whenever you create a new CVCs in APO system you should execute the job /SAPAPO/TS_LCM_CONS_CHECK
by default which will assign time series for the newly created CVCs.
In the following case, it looks like you have created CVCs and than during th FCST job as it does not found the time series for newly created CVCs you received the following errors.
You can execute the report now which will fix the issue, but I will suggest to execute this once CVC job creation is done as regular process.
Please let us know, if this helps to answer you question.
Thanks & Regards
Amol

Attribute Change Run aborted with an error :Not all data indexed for index

Hi,
I have an issue where the master data Attribute Change Run aborted with an error pointing to the BWA:
Attribute Change Run aborted with an error :Not all data indexed for index
we tried to load only 0 data into it,the error still occured.

Detail message is following:
not all data was indexed for index 'GBP_BIC:XYCH_098('0' for '114')
creation of The BIA INDEX for infocube 'YBC_SD015' terminated while filling

HELP iPhone 5 got reformatted while being updated. not all datas recovered from iCloud.

I recently updated my iphone5 with iOS 7.0.3 but while updating it was reformatted. I tried to recover my apps and photos from iCloud but not all datas were recovered. I am sure that I was able to back up my phone regularly. Only new photos were recovered the older ones which were the first ones that I backed up cant be found. Can I still recover those datas?

Restoring the backup should recover the photos that were in the camera roll at the time of the backup. If that didn't happen, all you can do is try restoring the backup again. You might try some of the tips mentioned in this discussion thread that other's found useful when they had a similar problem, such as the one by ezjules: https://discussions.apple.com/message/19518589#19518589.

All dates of BOM change

Hello!
I'm writing a function that is searching for parts of a model in the BOM. I'm saving the result to a buffer table, so I need to find all dates of BOM change (at all levels). For example:
01.06.2006 -> BOM created
07.06.2006 -> material A added at level 4
14.06.2006 -> material added at level 3
26.07.2006 -> material deleted at level 1
30.01.2007 -> material A replaced by B at level 4
We are using change numbers to keep the history...
I don't need to know what happend, I want to find out the dates of changes.
Is it possible to find out these dates without exploding the whole BOM?

Sorry! I sent this question twice by mistake! Please check my second thread: "BOM change dates". ThanX!
Message was edited by:
Donnie Darko

Transport Release Error: Not all objects in the request could be locked.

Hi all!
I hope you can help me with this one.
We need to transport a particular request in our QA and Production client. However, upon releasing of the transport request number, a warning/error message appeared on the screen:
'Not all objects in the request could be locked. Do you want to release anyway?'
I tried to display the error and below is the object messages:
Object messages: R3TR TABU ZLIFNR
Task F5DK900107 belongs to a different category
I don't know what that means, but I noticed that there are too many objects under the customizing task which I think is not part of the latest customization. I'm not sure what to do, I hope somebody could give me some advise.
Thank you very much.
Regards,
April

Hi!
There are many IMG activities under that same request which is not supposed to be transported to QAS. Is it possible to transfer the IMG activity and other customization into a new transport request? if possible, how?
I'm thinking if I can just try to change/save again the new configuration to a new transport request number. But if there's an easier way to solve this problem, I will consider that option.
=) Thank you...

Not all reservation could be blocked

When we do the CO13,then the system give me the error message"No
reservations could be blocked".
What does it mean and how to get rid of this?

Mayuresh,
Its looks like some user is in the change mode of the order or performing confirmation, due to this system is not able to allow you to perform the cancellation of confirmation. Request all your users to come out of the order and then you can try.
Regards,
Prasobh

Content-aware filling error: not enough data to fill it in a Content-Aware manner

Hello,
Brand new to CS5. I am trying the new "great" feature, Content-Aware filling (CAF). I am selecting an object and copying it onto a new layer. I am getting the following error:
Could not fill because there’s not enough data to fill it in a Content-Aware manner
Thanks!
Gustavo
Santa Fe, New Mexico

not enough data to fill it in a Content-Aware manner
Shouldn't the warning be "the Content-Aware feature requires more data to operate"… "thanks so much for your patience… xxx Adobe".
Its the strange and unnecessary use of the word "it" that gets me every time.

Depreciation Run Error "Not all the documents in the last posting run were

Hi,
When I tried to run depreciation, I found the error message as below.
"Not all the documents in the last posting run were posted"
How do I solve the problem?
Please advise me..
Thank you for your help..
Jake

Hi,
For an Update termination you need to go into the System Log to check the real cause of the termination.
My guess is that the document number has already been used. It has happened to me and I found no cause for that.
I did the following then:
I checked the highest used document number in that number range and corrected the from number of the number range.
Then I went into the TABA table and corrected the entries there that they corresponded to the number range.
Then I did a manual reconcilliation between AA and GL. In my case they matched, If they don't you would need to post manually to the GL to get them to match.
Then I ran recalculation of asset values. and finally an unplanned depreciation run.
For me it solved the problem.
Br
Cricke

Read data from Oracle , not all data brought over

I have a strange problem when read data from Oracle and save to SQL Server.
For example , there are 20k rows of data in Oracle , I created SSIS data flow, and data saved in SQL Server , Everything looks fine. But late you will find only first 16k rows of data in SQL Server , the rest is simple missng. no error or any waring.
I am using OLE DB .
Great appreciate for any help.
Ray

Thanks. I think that UseSessionFormat=true
helped me fixed this kind of issue in my other project.
I actually found out this issue for this case I was asking. I am actually not missing data. It was a data type issue. A column was using a wrong datatype, so when I run a query and didn't get result I supposed.

Not all data displayed

Good Afternoon;
I have an rdl report written in 2008 R2. When running the report in BIDS, I get back all the data I expect. However, there is a difference as to what is displayed in the ReportViewer regular view vs. the Print Layout view. In the regular, I only see data
up to a certain point. In the Print Layout, I see all the data.
In Print Layout there are 310 pages to the report. It looks like the data cuts off on what would be page 256 in the print view, in the regular view. (No page breaks in regular view)
Is there some kind of limit on how much data is displayed in the regular view?

No, only 1 of 1. Looking at the row groups, there were no page breaks added in anywhere. So basically it's trying to put all the data on one page. Is there some sort of limit as to the amount of data a "page" can handle?

Error: Not able send mail from OWA 2010. When I send mail, the mails go to Drafts Folder.

Error: Not able to send mail from OWA 2010. When I send mail, the mails go to Drafts Folder. I have installed everything correctly but when I tried to open the OWA and trying to send mail from OWA. The mails do not deliver and mails become saved in Drafts folder. I tried to re-send messaged from Draft also but not able to send.
Screen Shot: http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/Error%20-%20Not%20Able%20to%20Send%20Mail%20from%20OWA%202010.docx
Scenario: I have below configuration of exchange 2010 server Setup:
1. Windows Domain Controller with Global Catalog on Windows Server 2008 which only for Windows 2008 Server Native.
Server Name: WDC2010
Domain: Blazex.Com
2. Hub/Client Access Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
After that installed the Hub/Client Access Exchange role servers.
Server Name: HC2010.blazex.com (This is not a Addition Member server or ADC)
Role: Hub and Client Access Server.
3. Mailbox Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
After that installed the Mailbox Exchange role servers.
Server Name: MBX2010.blazex.com (This is not a Addition Member server or ADC)
Role: Mailbox Server.
4. 2nd Mailbox Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
After that installed the Mailbox Exchange role servers.
Server Name: 2MBX2010.blazex.com (This is not a Addition Member server or ADC)
Role: Mailbox Server.
5. Client Windows 7: It is installed on Windows 7 Ultimate Workstation. As per Microsoft recommendation, I have just installed Windows 7 and then join this computer to Blazex.com.
Workstation Name: WIN7.blazex.com
Role: Workstation
Error Description: I have installed everything correctly but when I tried to open the OWA and trying to send mail from OWA. The mails do not deliver and mails become saved in Drafts folder. I tried to re-send messaged from Draft also but not able to send.
Screen Shot (Same As Above): http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/Error%20-%20Not%20Able%20to%20Send%20Mail%20from%20OWA%202010.docx
I don't know what I am missing but I think there is some configuration I need to do on Hub/Client Access Server (HC2010). I tried to access the mailbox on XP Client system through OWA. I get the same problem as Win7.
Can someone please help me on this?
Thanks and Regards
Shambhu

Hi Subhash,
I have done the troubleshooting but I didn't find any problem at server side. I will send you mail also with all EXBPA report and as well DC, HC and Mailbox servers' Application Log and System Log.
Below are the questions's answers which was asked by you:
1.     Please check whether you can send email via Outlook.
I am not able to open the MS Outlook. Please check all details in this thread : http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/c491c5c7-7d6f-48ff-97fa-6bf83d94e53c
2.     Please run EXBPA to have a health scan.
I have run the EXBPA and didn't see any critical Problem. I have took the screen shot and report. Please have a look in below screen shot link:
a. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/EXBPA.docx                                                                            - Final Report
b. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.BaseLine.200906270226501077.data.xml                        - Baseline Health Check
c. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Connectivity%20Test.200906270223318201.data.xml      - Connectivity Check
d. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Health%20Check.200906270125477730.data.xml            - Health Check with 2 Hr. Baseline option
e. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Permission%20Check.200906270224343377.data.xml      - Permission Report
The error which I received in EXBPA, that allready ignored by you and told that it is bug in EXBPA. Have a look here: http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/d4bb03bb-db84-4a8b-83ba-19937d7dcacf
3.     Please check application log, whether any error event logged there. They could come from ADAccess related error or etc.
I didn't see any ADAccess event on the server. For this I have left my lab PC open and I will check again.
4.     We find that if mail .que gets corrupt, then this issue will occur, please try to move the affected user to another store and then test the issue.
I am facing this problem with all users (7 users). Anyway I moved one user from one server Mailbox Database (2mbx2010) to Other Server Mailbox Database (mbx2010). After that
a) Rebooted the Workstation
b) Login successfully with same user.
c) Delete the Old MS Outlook Profile
d) Create New profile for same user without any problem.
e) Tried to login in MS Outlook and got the same error. : http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/c491c5c7-7d6f-48ff-97fa-6bf83d94e53c
f) Open the OWA successfully for Same user.
g) Tried to send mail but again mail went to Drafts Folder.
5.     I noticed that you test the issue after you close outlook. I recommend you to reboot your pc and then access
mailbox via OWA to test the issue.
I tried you suggested option, but sorry it also couldn't help.
6. You also check your disk space.
     All Servers have Enough Disk Space. Check the EXBPA Report.
7. You may run EXTRA to get log information for further troubleshooting.
Need more time for this.
8. Please save application log, system log as *.evt file, then send them with EXTRA,EXBPA report to [email protected] .
   I have sent it as your mentioned mail address OR, you can get the mentioned log from below link also:
   a) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/WDC2010%7C_APPLICATION.evtx           - DC/GC Application Log
   b) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/WDC2010%7C_SYSTEMEVENT.evtx          - DC/GC System Log
   c) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/HC2010%7C_APPLICATION.evtx              - Hub/Client Application Log
   d) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/HC2010%7C_SYSTEM.evtx                      - Hub/Client System Log
   e) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/MBX2010%7C_Application.evtx                - Mailbox Application Log
   f) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/MBX2010%7C_System.evtx                      - Mailbox System Log
There will be some error log you will be that the system is not able to communicate with DC/DC, MBX or HC at everyday around 3 AM or some time 6 PM Evening also. These error came because I have installed VM on Windows 7 Workstation and after 45 min or one hrs. if I don't work on PC, then pc goes to sleep. so you may ignore these alerts.
I hope my answer will give you some clue and I expect more help from your side.
With Best Regards
Shambhu Sharma

Could not find any available Global Catalog in forest when running RemoteMailbox cmdlet

My current Exchange environment is a hybrid configuration of Office 365, Exchange 2013 hybrid, and Exchange 2007 on-premise.
I have a script responsible for enabling remote mailboxes and assigning O365 licenses to a list of users; essentially provisioning users an O365 mailbox. This script runs every hour through a defined scheduled task in the Task Scheduler.
The script is proven to work but will intermittently throw an error on some days: "Could not find any available Global Catalog in forest root.xyz.com"
Here are the nuances of the error when it does occur:
It will only throw the error when the script is run via scheduled task - the script will work fine if executed from the command line
The error occurs when "Enable-RemoteMailbox" or "Get-RemoteMailbox" is called.
The same error will occur with ANY script that calls "Enable-RemoteMailbox" or "Get-RemoteMailbox" and is ran via scheduled task - even when the RemoteMailbox cmdlet was the only line in the script
Here is the output and error when Get-RemoteMailbox -verbose is ran:
VERBOSE: [15:49:52.474 GMT] Get-RemoteMailbox : Active Directory session
settings for 'Get-RemoteMailbox' are: View Entire Forest: 'True',
VERBOSE: [15:49:52.489 GMT]
Get-RemoteMailbox : Runspace context: Executing
user: ,
Executing user organization: ,
Current organization: ,
RBAC-enabled:Disabled.
VERBOSE: [15:49:52.489 GMT] Get-RemoteMailbox : Beginning processing
VERBOSE: [15:49:52.521 GMT] Get-RemoteMailbox : Current ScopeSet is: {
Recipient Read Scope: {{, }},
Recipient Write Scopes: {{, }}, Configuration Read Scope: {{, }},
Configuration Write Scope(s): {{, }, },
Exclusive Recipient Scope(s): {},
Exclusive Configuration Scope(s): {} }
VERBOSE: [15:49:52.521 GMT] Get-RemoteMailbox : Resolved current organization: .
VERBOSE: [15:49:52.521 GMT] Get-RemoteMailbox : Searching objects "abose" of type "ADUser" under the root "$null".
VERBOSE: [15:49:52.536 GMT] Get-RemoteMailbox : Previous operation run on global catalog server 'evw-xyzdc-p02.ad.xyz.com'.
Get-RemoteMailbox : Could not find any available Global Catalog in forest root.xyz.com.
At C:\IDM_In\Scripts\MinimalTest.ps1:42 char:14
+ $abose = Get-RemoteMailbox 'abose' -verbose
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Get-RemoteMailbox], ADTransientException
+ FullyQualifiedErrorId : E421EF0B,Microsoft.Exchange.Management.RecipientTasks.GetRemoteMailbox
VERBOSE: [15:49:52.567 GMT] Get-RemoteMailbox : Ending processing
What could be the cause of this intermittent error?
Thanks for any help

looks to me permission error as when you are running it via a schedule task is is not able to call exchange shell/ commands {confirm this} where as when you running this manually looks to me you open exchange shell, may be as admin also and then running
the script.
schedule task process is not able to get the permission..
MARK AS USEFUL/ANSWER IF IT DID
Thanks
Happiness Always
Jatin

All websites including Firefox have security warning "the information you entered is to be sent over an unencrypted connection and could be seen by a third party" Firefox is not safe date started July 1, 2010 even when I remmove the security warnings the

security warning "the information you have entered is to be sent over an unencrypted connection and could be seen by a third party" this warning appears on ALL websites, including all Firefox sites, happened after a MSupdate on July 1, 2010. I wont use Firefox is is not safe - hwat happened?
== This happened ==
Every time Firefox opened
== july 1, 2010

Ignore that warning. Report it to the Website Developers of the websites on which you are seeing this message. Ask them to deploy Secure HTTP Connection. And use secure Websites (https) addresses.
Site Identity Button
* https://support.mozilla.com/en-US/kb/Site%20Identity%20Button

Error - Dispute Case Data Could Not Be Read

I got above error while creating the dispute case in production server.
Anyone have an idea how I fixed it, does it need to see RFC?
Please guide me
Krunal

Hi Mark,
Thanks, while I create one document for dispute case system is not able to read the document. It is in productive client. we have cluster specific transactions in one cluster we post documents and another cluster dispute cases create. so when I tried to create dispute case in main cluster with ref to document system gives me below error.
Normally we post transctions in G cluster and after posting in G we process dispute case in G cluster and after it open in E cluster for details about dispute case.
Using UDM_DISPUTE transction code for look into dispute cases in E cluster, here we canonot proceed from G to E, In G Cluster we find this error and because of this we unable to create dispute case in E cluster.
If you need more information, Please ask me.

Error "Not all data could be changed in LC" when running DP macro

Similar Messages

Maybe you are looking for