Error "Not authorized to use ... it is not in the public solution model"
Hi Experts,
I am trying to create a new communication scenario in SDK to use the inbound web service "HumanCapitalManagementMasterDataReplicationEmployeeMasterDataReplicationIn" but it raises this error.
How do I solve this authorization error?
Thanks and regards,
Bruno
Unfortunately this other web service is not available for me, I can only select the first one:
Also, according to the documentation this second one is not released yet:
Inbound Service Interface (public)
But do you think it is operational? I could try to use it, but I need its WSDL and I don't know how to get it.
Thanks and regards,
Bruno Hjort
Similar Messages
-
I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
* You have used the proper case; requests ARE case-sensitive!
* You have entered the URL correctly. (i.e. proper directory/filename)
* You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
* You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
* The user/file still exists on this server.
I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
== URL of affected sites ==
http://facebook.com; buscagoogle.comI have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?
-
Depreciation Run Error "Not all the documents in the last posting run were
Hi,
When I tried to run depreciation, I found the error message as below.
"Not all the documents in the last posting run were posted"
How do I solve the problem?
Please advise me..
Thank you for your help..
JakeHi,
For an Update termination you need to go into the System Log to check the real cause of the termination.
My guess is that the document number has already been used. It has happened to me and I found no cause for that.
I did the following then:
I checked the highest used document number in that number range and corrected the from number of the number range.
Then I went into the TABA table and corrected the entries there that they corresponded to the number range.
Then I did a manual reconcilliation between AA and GL. In my case they matched, If they don't you would need to post manually to the GL to get them to match.
Then I ran recalculation of asset values. and finally an unplanned depreciation run.
For me it solved the problem.
Br
Cricke -
Warning! Do not buy the Sun Solution CD!
This is for people who just want to update their browser to the latest version. When you go to the download page, do not get fooled into buying it on a CD. It is a lie! The Java 5.0 is NOT on the CD only a link to the download page, which is a rotten thing to do to people!
The CD is nothing but advertisements.
You think they could have squeazed the Java 5.0 update on the CD, but that would have been too logical.
I bought the Sun Solution CD because I am a dial-up user and did not want to download that large file size. Right there on the download page an offer is made by Sun to order the Java software on a CD instead. So I bought the CD for this update and could not find it anywhere on the CD. I contacted EVERY department of Sun to help me find where it is on the CD. No one can answer me. I finally found some instructions on the website on installing from the CD. ALL IT HAS IS A LINK TO DOWNLOAD IT FROM THE WEBSITE!!! That is a terrible thing to do to people. WHY IS IT NOT ON THE CD? That is false advertisement and an out right LIE!It's not unheard of that the carrier would need more information to complete a number port from another carrier. They may have needed some information in order to put it through, such as your old account number. This should have been done automatically when you ordered the phone through Best Buy, but sometimes it does need to be done manually.
As for the rest of your situation, I have no knowledge of those events, but you forgot a fourth possibility: there was no relation between ordering a phone from Best Buy and receiving unsolicited phone calls.
Dan K. | Mobile Specialty Stores
Any opinions expressed in this post are those of
the author and do not represent Best Buy Co., Inc. -
iphone 4 after install the iOS 6 wi-fi networks are not detecting on public spot but working on home network.What is the reason for this/ any settings?
Is the firmware in the router up to date?
See here for the latest for v2.2: http://homesupport.cisco.com/en-us/support/routers/WRT54G
Note: All these ideas are a bit lame since you say that some iPhone 5s are connecting OK and they running the same iOS level 6.1 and, i think, have the same Broadcom WiFi chip BCM4334.
All devices are running iOS 6.1 right not 6.0.1, or 6.0.2?
You might want to try your iPad mini on some other WiFi networks to see how it fares there. -
Can you use a VGA monitor on the Mac Pro model?
I'm considering getting a new Mac Pro to replace my beloved PowerMac G4 MDD. I have a ViewSonic Graphics Series 19" CRT monitor (VGA) that I use as a palette monitor, with a 19" SyncMaster LED as my main monitor (DVI). My PowerMac's video card has both DVI and VGA ports.
Will I be able to use my VGA monitor with the basic Mac Pro (MB871LL/A)? Will a DVI/VGA video port adapter work, and if so, will it work well? Thanks.I had two 19" Viewsonic WS monitors hooked up to my X1900XT on my MacPro and it worked just fine with the VGA/DVI adapters (I got the small 2" white adapters that don't have any "cord" in the middle. I swapped them out for two 22" WS Acer monitors and now use the DVI inputs and I am still happy.
-
I have two Canon printers an MP970 and an MX710, when I installed the MX710 it disabled my ability to access the MP970 SCANNER from the Canon Solution Menu.
I have tried to re-install the drivers and the MP970 Solutions but even that only allows the scanner in the MX710?
IS there any way to use the scanners for both? AND what do I need to do.Hi bburtjr,
The MP970 and MX710 use two seperate versions of the Solution Menu, so I think what is happening is that it copied over your desktop shortcut with the latest version which nly shows the 710. If both versions of the Solution Menu are still on the computer, they should be accessible under your Start Menu if you are using Windows or your Applications Menu if you are on a Mac. Under the Start Menu you would go to All Programs and Canon Utilities and it should list two seperate versions of Solution Menu. The newwer version being for the 710 and the older being for the 970. On Mac, if you click Go from Finder, and click Applications, you should have the same Canon Utilities folder and the same applies as it does in Windows. You should have two versions of Solution Menu, one for each printer.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
Even using it on this page there are 5 errors geneated.
I am using HTML Tidy.
Is there something wrong? Am I using it incorrectly?I checked and agree this page does not pass validation
* http://validator.w3.org/unicorn/check?ucn_uri=https%3A%2F%2Fsupport.mozilla.org%2Fen-US%2Fquestions%2F992639%23answer-551039&doctype=Inline&charset=%28detect%20automatically%29&ucn_task=conformance#
That validator is an official w3.org validator
*http://simple.wikipedia.org/wiki/World_Wide_Web_Consortium
* http://www.w3.org/
I suppose it could be expected these pages would pass validation. I will mark this for escalation lets see what HelpDesk's observations are on that.
I also note that ''html tidy'' appears to be a utility originating from w3.org
* http://www.w3.org/People/Raggett/tidy/
As for your own problems with web design that would best be discussed elsewhere. <br />Ordinarily I would say a Mozillazine forum may be a good place to try
* http://forums.mozillazine.org/viewforum.php?f=25
Now that Webmaker have a presence on this forum it may actually be worth asking again and specifically asking from
* https://support.mozilla.org/en-US/questions/new/webmaker
IF you are attempting to use any Webmaker advice or product
* https://webmaker.org/ -
How to: display large error note in the front panel?
hi guys,
When "error out" has an error, I would like to display HUGE RED TEXT in the FRONT PANEL saying: "STOP, ERROR DETECTED!" )
How to do that?
Thanks for your help.
Solved!
Go to Solution.Place an indicator on the panel. Set the text to HUGE and RED, and set its value to "STOP, ERROR DETECTED!". Make it not visible. When you get an error, use the "Visible" property node to display it.
To learn more about LabVIEW it is recommended that you go through the tutorial(s) and look over the material in the NI Developer Zone's Learning Center which provides links to other materials and other tutorials. You can also take the online courses for free. -
I had this problem with two different iPod nano's that I bought for my kids.
The iPods would not be recognized by iTunes. They would throw an error message about how the ipod was not being recognized correctly. It was computer specific, since they were recognized by other computers in my house. All other USB devices worked fine on the PC the nanos were not working on.
After wasting hours following the instructions that came up with the link (reinstall itunes, run trouble shooter, etc etc), I finally determined that the actual apple driver was not loading, in that it was not showing up in device manager.
So, I clicked on the USB device that was showing a yellow exclamation mark, told it to update its driver and I had a disk, pointed it to common, apple, drivers, and voila a different ipod "device" showed up in device manager. After rebooting, everything was fine.
The steps to resolve this type of issue should include this approach as well...near the top, to head off others from the hours of annoyance I experienced.- Did you try everything here:
iOS: Device not recognized in iTunes for Windows
- Tried another cable?
- Tried another computer?
If still problem time for an appointment at the Genius Bar of an Apple store. -
WSP deployment to multyiple fronend server in sharepoint 2013 not reflecting the updated solution
Hi I have created a wsp package and deployed it to the multiple front end server. It was working fine on initial deployment. However after doing some change in JS file, I update the solution (through PowerShell update solution command) and found
it's not reflecting in Browser . Even if i have checked the file in both front end are updated (in 15 hive).
Thanks and Regards
Er.Pradipta Nayak
Visit my Blog
XchangingIf the files are updating on the front end servers, but not showing changes in the browser then the problem is that the .JS files have been cached by the browser. You need to clear the Browser cache after this kind of change before the change will
be reflected in the browser. You can manually clear the browser cache in IE using the developer toolbar [F12].
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem. -
I can not install the voice analysis models in Spanish for premiere pro 64 bits CC
Hi, can someone help?
I downloaded installed models in speech analysis in Spanish for the premiere cc, but when installing it says it installed in the x86 folder, thing that did not give importance because it don´t gives you option to change it; the problem comes when you open the program, (which is 64 bits, I guess no there are premiere cc 32 bits, i do not know) it does not recognize that the Spanish modules are installed and still appears in English only.
Anybody can help me?Install additional speech libraries
-
My calendar does not show the public holidays in 2013 or after.
I've already enabled the hotmail's public holiday in iPad calendar. However, it shows only this year, 2012 or before, but not 2013 or after. Anyone can help? Many thanks.
http://support.apple.com/kb/ht5209
http://support.apple.com/kb/ht4437
http://support.apple.com/kb/TS4215
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-Airplay-Icon-Missing. htm
Cheers, Tom -
TMobile and Sony should not scam the public by selling the defective piece of junk xperia
this phone is a total LEMON, A PIECE OF CRAP.
Why does a company sell me a phone for $1000 (before tax) that they know does not work properly?
This is nothing but a scam dirt-bag. company,
What kind of company sells you this junk, and then does not stand behind it?T-mobile isn't selling the Z1 yet...
-
When I'm working on my laptop downstairs (or at a local coffeeshop, or when traveling), I'd love to be able to grab files that are on my iMac back home. (without relying on using Dropbox or similar...)
Thanks!OS X: Using and troubleshooting Back to My Mac with your iCloud account
Maybe you are looking for
-
How do i access my mac email account from another computer?
How do I access my mac email account from another computer?
-
Creation of sales order- screen exit
Hi all, I have a requirement like while creation of sales order need to develop one screen field in additional data B.i developed that field. and now while creation of sales order it will save in vbak table. now the problem is that screen field will
-
Hello, I'm writing it to inform you that I am having some problems with mozilla firefox 3.6.10, and I know that other people are having the same problem: Ever I run any fullscreen application, like games, while using mozilla firefox 3.6.10, it automa
-
Hi All, What are the standard DSO's and Cubes used in Cost Centre reporting. 0CO_OM_CCA_1 0CO_OM_CCA_7 0CO_OM_CCA_8 0CO_OM_CCA_9 0CO_OM_CCA_10 Can we use 0CO_OM_WBS_1 0CO_OM_WBS_6 0CO_OM_WBS_7 0CO_OM_WBS_8 in place of CCA datasources or are the WBS u
-
Bad sound after installing Leopard
After my Leopard install the iTunes sound is horrible. It sounds like AM radio ... When I play the same song over Frontrow it sounds fine.... What could be wrong? Ch