Error: not enough disc space?

I am trying to export my first project. Even though I have 133G left on my external hard drive I get the (not enough disc space) error. My project is 87 minutes long. Since my external drive has more than enough room, I guess the program is only recognizing my internal drive (which only has 4 gigs left). I have been opening the project and editing it through the external hard drive for quite some time now, so I am a bit confused and frustrated. My capture scratch discs are set to the external drive. I have been trying to figure something out with the media manager, but to be honest, that thing scares the **** out of me. I use FCP 5.0 on a G5 dual 1.8. Using NTSC DVCAM 48K. Is there something I'm missing about using the external drive? Any help would be appreciated!

disk formatting is handled by the Disk Utility application in the /Applications/Utilities folder.
reformatting your disc will ERASE ALL the contained data
... and you DONT want to format as FAT32, rather the opposite. the advice was to check that your disc is formatted as Mac OS Extended, and if not, to format it as such. you can check this by selecting the G-RAID's disc icon in the finder and pressing Cmd-I to open the info window.
Look down to Format, just above Capacity, in the General properties.
no doubt you will receive extra advice to ensure that the drive is not "Journaled" but this is not a big deal

Similar Messages

Code:25 Not enough disc space Help!!!!!

Hi there,
Can someone help me before I smash my PC up!
Adobe you need to sort issues out with your products before you put your sofware on the market!
For the last four days I have been trying to create a Blue Ray disc, which has been sent from Premiere CS5.2 to Encore via dynamic link.
The project is 2hrs 36mins in length.Transcode settings are set at Transcode Default Settings. Dimenions of project are 1440x1080, Frame Rate 25.
I have 398Gb free space on my drive and 2Gb free space on disc.
Start to bulid the project in Encore, this takes another 10hrs to transcode, then it attempts to write onto disc then I get "CODE 25" Error not enough disc space?????? What the **** is this ?
I have gone through the forums on here which have mentioned deleting the session files, done all this and still no luck.
I would appreciate it if anyone has managed to solve this problem and pass their findings on to me.
Thank you
Wayne

Hi Guys,
I have finally managed to burn the project onto Blu-Ray but I have a slight issue with the Audio being slightly distorted. What would be the best settings for the audio?
This is what I did to get it onto disc:
Exported my project from Premiere CS5.2 through AME then imported into Encore 5.1. I did change the Administrator settings as advised and it looks like this did the trick.
My Encore Project Settings were set at: Codec H.264, Dimensions 1440X1080, Frame Rate 25, Upper Field First.
Export Settings from Premiere were set at:
Video
T.V Standard: Automatic (based on source) (PAL)
Frame Dimensions: 1440x1080
Frame Rate: Automatic
Field Order: Automatic
Pixel Aspect Ratio: Automatic
Profile: Main
Level: 4.1
Bitrate Settings
Bitrate Encoding: VBR, 1 Pass
Bitrate Lever: High
Target Bitrate: 18.75
Maximum Bitrate 22.5
Audio
Codec: Dolby Digital
Audio Layer: Dolby Digital Stereo
Frequency: 48 KHz
Bitrate Settings
Bitrate (kbps) 192
Do I need to up the audio bitrate for better sound as I'm getting distortion. If so what is the best setting for this?
Thank you all for your help
Wayne

I connect my ipad it shows in left side of itunes it is commencing sync then it freezes itunes and i have to disconnct it manually then a error message telling me that there is not enough disc space for ipad which is not correct any ideas folks

i connect my ipad it shows in left side of itunes it is commencing sync then it freezes itunes and i have to disconnct it manually then a error message telling me that there is not enough disc space for ipad which is not correct any ideas folks

i have reset the ipad and restored it to no avail

Im try to import a large amount of pictures to Iphoto. I have pleant of space on my HD. But half way thru the transfer an error message comes up and says not enough disc space. How can I fix this?

Im trying to import a large amount of pictures to Iphoto. I have pleanty of space on my HD. But half way thru the transfer an error message comes up and says not enough disc space. How can I fix this?

I. I want to import 58.64 GB of Photos from an external HD
2. I have 278.28 GB space left on my HD
3. The exact error message goes like this......
Insufficient Disk Space
iPhoto cannot import your photos because
there is not enough free space on the
volume containing your iPhoto library
I Have researched this and most advice is to empty the iPhoto trash. I have already done this and it did not help.
Thank you for helping

"Safari could not download the file because there is not enough disc space"

"Safari could not download the file because there is not enough disc space"
I have 60gb available on my MBA and I have "read and write" privileges for the download folder. This error seemingly came out of nowhere. It doesn't matter if the file is 1gb or 10mb, I'll get the error. All I have to do is remove the .download extension and I can use the file which is complete despite the error.
This is really annoying so any help would be appreciated.

I never used to have a problem with creating a new folder and moving the download into it
But you'll have a problem if you do it now.

"Not enough disc space" when exporting

Hello all -
I am running iPhoto 2.0.1 with OX 10.3.9. My hard disc has 40GB.
Every once in a while, when I try to export a large number of photos into a desktop folder or as a slide show to QuickTime, I will get an error message saying, in effect, that there is not enough disc space to complete the export. My hard disc at those times has anywhere from 7 to 9 GB of free space. Quitting and restarting iPhoto has no effect. Neither does restarting the computer. Often times editing a photo in Photoshop Elements which then puts the edited picture back into iPhoto fixes the problem - but not always.
More often than not, the export works fine. But these "error" situations keep occurring every now and then.
Any thoughts?
Thanks in advance for your replies -
- OF

anybody?

Try to burn Blu Ray. It says: Not enough disc space

Hi everybody,
I try to burn a blu ray disc. My Blu Ray Writer is: HL-DT-ST BD-RE BH10LS30
I use 25GB BD-R Discs from Verbatim.
If I try to burn a 20GB *.iso file, every tool I tried says immediately: There is not enough disc space. What is wrong?
Even if I try to burn smaller files to Blu Ray, it always says: There is not enough disc space.
I'm confused
Regards
Maik from Germany

The 'There is not enough disc space' message appears immediately. It doesn't matter if the output file is 500MB or 20GB.
I tried different BD-R discs. It is always the same message.
I found a similar case:
I am trying to burn a blu-ray disc but having problems.
Do I really have to buy a 90$ tool so I can write my movie on BD-R?

Thread creation error: Not enough storage space

Hi,
Recently (the past week or so), my desktop client for Skype has been crashing regularly. This is accompanied by large (over 1.2GB) amounts of memory usage. At semi-regular intervals (say every few hours), Skype will post an error with the text "Thread creation error: Not enough storage space..."
I am using the latest build of Skype. I am not performing any Skype logging. This error is clearly an ongoing issue which has not been addressed, as prior threads have discussed this as well.

Errors like this have been addressed and continue to be addressed. Being that the errors are related to memory leakage of one form or the other, the problem can have several sources and be agitated by several programs. I personally run the latest version on all my machines in a 24/7 capacity and have not run into the problem. Some versions in the past created a similar error for me, yet the latest has not. If you've already updated your IE's flash and that has not alleviated the problem, the only other solution is running an earlier release that doesn't crash for you or restart Skype more often. I've had virtual video devices trigger this behavior by simply launching the video settings once. The virtual device even when not in use continued to consume memory under Skype until it crashed. So if you use any virtual audio/video components you may want to remove them to see if that changes anything. Some people have also blocked ads when those were the source.
http://community.skype.com/t5/Windows-desktop-client/low-storage/m-p/3974193/highlight/true#M344826

HD Space vs FCE "Not enough disc space" warning

I'm trying to capture a 1 hour 27 minute video only clip. I've checked by settings and they are for my external drive that still has 346GB remaining. However, when I click "Capture" the device stops the clip after 9 minutes plus a few seconds, saying I don't have enough disc space or memory.
To get around this, I'm re-starting capture each time I get that message and creating 9 minute clips. I've captured video and audio segments up to a couple of hours without getting this warning before. I guess I'm too inexperienced at FCE to know where I should look to override this erroneous message. Even the Capture Window---which shows color bars and space to name the bin, reel, name, etc...says across the top that I have 344.9GB total free space, and total free AV time of 1545 minutes.

The HD is a Western Digital MY BOOK 500GB...
Is this a Firewire HD? If it's USB2 that will also be the cause of your problems.
Video needs firewire because of the method of data delivery in constant stream rather than in 'packets' as via USB.
I can't say why you've not had problems before - some people can capture via USB but it's not recommended and will probably lead to dropped frames and other issues.
Have you checked the formatting anyway? - all I can say is that it's well documented and recommended to capture to a drive to an external firewire and for it to be formatted Mac OS Extended (not journaled) for your computer set-up (as you can't add additional internal drives). Any other set-up will lead to problems.
Perform a search, there's a few posts in this forum referring to capture limited to about 9 minutes.

Can not sych iPod after Windows XP re-install..error not enough free space

My laptop required a re-install of Windows XP. Now i receive an error stating iPod cannot be synched because there is not enough free space to hold all of the items in the iTunes library (19.35 GB requried, 3.06 GB available).
Since nothing has been added to the iTunes library (that I know of) how is this possible?
What do i have to do to correct this?
Thanks

I was talking about free space on the ipod.
a normal synch did not work.
I believe I have found the what is wrong, but not the actual cause of the problem.
it appears that my itunes library has included every song and video on my computer, even though they were not in itunes before the re-install of the OS. Further, many albums have duplicated themselves in the itunes library. It looks like i will have to go through the entire library in itunes and remove everything that shouldn't be there and remove all of the duplicates.
thanks

Cs5 bridge error not enough storage space

I have more than enough room on my computer, but every since I got windows 8 bridge constantly stops working saying theres not enough storage space??

Is your storage all on the same drive, or do you have separate boot and data drives? If so, how much room on the C: drive?
Try this
http://helpx.adobe.com/bridge/kb/cache-bridge-cs4-cs5.html

Error not enough disk space when upgrading to SAP B1 8.8 PL14

Hi,
I'm trying to do a test upgrade for a customer running SAP B1 2007.
When running the upgrade wizard for SAP B1 8.8 PL14 I'm having an issue with not enough diskspace for the backup.
In the help file it's says that you need about 3 times your company database and enough room for common and other upgrade files.
The company database is about 35GB
Tried putting it on a network drive with around 2000GB and it told me that there was not enough disk space...
Thought it had something to do with the network drive so I added a local disk with 400GB, still it tells me that there is not enough disk space, what to do?
I must also point out that I'm running this on a virtual server.
Thank you
BR,
Anders

HI Anders,
You may try this,
1. Take a back up of the db.
2. Go to Sql and detach the database.
3. Paste it in a drive with at least 5 times the space of your database (175 gb in your case.)
4. Go To sql, attach the database with the new location in new drive.
5. Perform upgrade.
6. Once the db is upgraded, you may take a back up and follow steps 1 to 4 to bring it back to the original destination. Hope this helps.
Thanks,
Joseph

STUDIO PRO: Not Enough Disc Space / External Phillips DVR-110

DVD Studio Pro 4 has a 1:52 chapter marked movie (exported from Final Cut Pro to Apple Quicktime; SOUNDTRACK cleaning involved) with menus.
When trying to write to disc, get "not enough space" error
Bought an external Dual Layer Phillips DVR-110 & connected it via USB2. When trying to write to a +R dual layer disc, get a level 0 error. Get same "not enough space" error when trying to use a single density -R disc in the Phillips.
IMAC Mac OS X (10.4.7) DVD Studio Pro / +R disc

If you are encoding in DVD SP, encode outside (changing thee prefs is not relaible exxceept for new projects, and eveen then better to encode outside DVD SP)
1.) Make sure to use AC3 audio, not AIF
2.) Set your Average bit rate to about 4.8 (It is a bit lower than recommended by calculators http://www.videohelp.com/calc.htm which recommmends 5.2 Average forr 2 hours with 192 AC3 files, but that may push you too close to the edge. If you wanted to drop a bit more may still be oaky in termss of quality, 4.5 vs 4.8 mmay not even be noticiable)
You should be able to get this on a DVD-5. Does the hard drive where you are building to have enough room?

Time Machine error "not enough disk space"

I just recently updated to Mavericks and Time Machine won't work. Sounds like it's a common problem, but I've gone back a month in the forum and haven't found my exact issue yet. In my case, I get an error message that claims I don't have enough disk space, that's the reason TM won't start. In the past, Time Machine would just delete the oldest back ups and create new back ups when I've filled up my back up hard drive.
My hard drive is plugged in the back USB port, and it's a 500 GB Hitachi. My Mac is also 500 GB, it says I need 354 GB to back up and I only have 96 available.
I've tried the following:
Turn TM on and off, disconnect it from Mac
Added entire Mac HD to the Spotlight privacy list, then pull it off the list such that Spotlight would re-index my hard drive.
Turned off the energy saving on hard drives in preferences
I'm almost thinking I need to reformat my back up TM drive and start a fresh TM again. I have no problem deleting what I have on there, but would hate to do it if it also wouldn't work.
Any ideas?

Please visit Pondini's Time Machine FAQ for help with all things Time Machine.

Archive and Install problem (not enough disc space for another install)

Alright, so I've got the blue screen. I tried getting rid of the APE stuff, and they were all successfully deleted, but it's still the blue screen. So I'm going to do the Archive/Install thing. My problem is that if I try to do an Archive and Install, I won't have enough space to do it. I have around 3.5 GB right now, but that's probably not enough to do another install.
My only option I think is to go into single-user mode and manually remove my larger files. I have a back-up drive, and I tried removing all the stuff that's on the back-up drive from my computer, but all of them are listed as read-only.
So is there a way to override permissions in the UNIX thing? Or is there another option for me with?
Also I don't know if this matters, but I'm installing it from an external DVD drive and I'm doing it from PANTHER and not Tiger.
Message was edited by: JollyWaffle

...anyone? I left the blue screen on overnight but it didn't do anything.

Error: not enough disc space?

Similar Messages

Maybe you are looking for