Error Not Found(404)

Hi All,
I Have created a setup package for mobile 2005 device.I am able to download DB2e but when i click on the application link i m getting the following error messgae.
Error Not Found(404)
Original request:/zapp/start
Not Found Request:/zapp/start
Does anyone has idea why its happening.Please suggest
Thanks
Regards
Devendra Phate

Hi Devendra,
It looks like that you have deployed the DB2e as an application. You shoud deploy is as an add-on. Undeploy and proceed as described in the OSS note 889257 for how to install and deploy DB2e
Link (https://websmp208.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=0000889257&nlang=E)
Regards
Jacob Wesenberg

Similar Messages

MAM 2.5 error on PDA "Not Found (404)"

Hi,
I am using MI Client 2.5 SP18 and I have tried both the MAM 2.5 SR2 and SR4 installation via the MI Webconsole. It appears to install ok and is on the MI 2.5 application screen, however when I try and run the
application I get the error "Not Found (404) Original request /TEST_MAM_25/start Not found Request: /TEST_MAM_25/start.
I have reinstalled the PDA several times. Is there another way to
install the MAM 2.5 wav file. Do you know what my issue may be?
Regards Gavin

Hi,
the name you use as the Component Name in the WebCOnsole needs to be the same than the file name you are uploading:
File Name: MAM25.war
The Component Name in WebConsole: MAM25
You cannot call it TEST_MAM25.
Rgds Thomas

I cannot log into facebook. I get the following message: 404 Error - Not Found The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request,

I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
* You have used the proper case; requests ARE case-sensitive!
* You have entered the URL correctly. (i.e. proper directory/filename)
* You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
* You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
* The user/file still exists on this server.
I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
== URL of affected sites ==
http://facebook.com; buscagoogle.com

I have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?

Oracle Certification Page Error - Page Not Found (404)

Hello,
I'm experiencing the following problem: can not access the certification section on oracle site:http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=39
I receive the following error:
Page Not Found (404)
We're sorry! The page you are looking for has been moved or no longer exists.
Please check the current status page first before logging an SR to AITSYS WEB SERVICES group
or Calling the HelpDesk and provide the following information along with steps to reproduce the issue:
Page Not Found Error 404 on Thursday, 23-Oct-2008 01:54:56 PDT amts498.oracle.com (141.146.13.151)
Does anyone have the same problem?

I am sorry, but I am not able to replicate your issue. The page is working fine for me. Perhaps you could contact OU technical support. Are you also having trouble getting to page tihs page http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=3?
You can find OU technical support numbers on this page http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=123. There are also certification email addresses, but they will not be able to assist with technical problems with the website. The Oracle Certification Program Website is a part of the Oracle University website, so this is probably a bigger problem that you are having with the OU site.
Regards,
Brandye Barrington
Certification Forum Moderator
Certification Program Manager

Attempting to log in and after about 1 minute of trying to access Acrobat, I get an error "File Not Found (404)

Attempting to log in and after about 1 minute of trying to access Acrobat, I get an error "File Not Found (404)

Hi trouble logging in,
I checked your account and everything looks fine there. What happens when you log in directly to https://cloud.acrobat.com?
Best,
Sara

Shared Service issue. Not found 404

Hello. Everyone.
I installed and configurated EPM 11.1.2.3.
When I opened Shared Service URL , I get an error message that "Not found 404".
WorkSpace can display.
What happen?
I run validation.bat .
Shared Services URL is error.
Workspace URL is not error.
Where is an log file of validation.bat ?
OS:Windows Server 2003 SP2
DB:Oracle database 11.2.0.1.0
IIS ver6.0
I use Oracle HTTP Server.
Please give me advise.

As always you should check the logs, don't know where the logs are then go to the logs section in the documentation Introduction
Cheers
John
http://john-goodwin.blogspot.com/

"Client error not found" = DOOOOOOOOMMMMMM!!!!!!!

Ok been getting this a lot recently and I think it is to do with my printer setup script. There must be a way to fix it, but for the life of me I can not find the solution.
It usually starts with all printers on the system being paused. You can unpause them, but as soon as you try print they automatically pause again.
You can reset the print system, but when you try readd a printer you get the message of doom "client-error-not-found".
From then on I can not add any printer to the system and the only fix is a wipe and reinstall.
I mentioned above that I use a printer script to install the 10+ printers in the office onto the 80+ machines. All the machines are running 10.5 and upto date.
I have put the script to have a look at, but even if it is causing the problem there should be a way to fix the issue.
#Reset print system.
do shell script "lpstat -p | cut -d' ' -f2 | xargs -I{} lpadmin -x {}" with administrator privileges
#log onto the server and mounts the IT_support folder. If the IT_support folder is already mounted it will skip the mount and move on.
if {"IT_support"} is not in paragraphs of (do shell script "/bin/ls /Volumes") then
mount volume "afp://192.168.1.251/IT_support"
end if
do shell script "cp -frv /Volumes/ITsupport/01_Mac/04Printers/PrinterAutoInstall/drivers/* /Library/printers/PPDs/Contents/Resources/" with administrator privileges
#Add the printers to the system.
#Colour Printers.
#Colour_Printroom Appletalk.
do shell script "lpadmin -p Colour_PrintRoom -L FirstFloorPrintRoom -E -v pap://*/Colour_PrintRoom/LaserWriter -P /Library/printers/PPDs/Contents/Resources/xrx7655.ppd -o printer-is-shared=false" with administrator privileges
#Colour_Kitchen Appletalk.
do shell script "lpadmin -p Colour_Kitchen -L First\\ Floor\\ Kitchen -E -v pap://*/DC3535_DC3535Print/LaserWriter -P /Library/printers/PPDs/Contents/Resources/Xerox\\ DocuColor3535\\ PS -o printer-is-shared=false" with administrator privileges
#BizHub Appletalk.
do shell script "lpadmin -p Colour_BizHub -L Colour_BizHub -E -vpap://*/X3eBizhub45035C-KMPrint/LaserWriter -P /Library/printers/PPDs/Contents/Resources/en.lproj/Fiery\\ X3eTY\\ 35C-KM\\ PS\\ v2.01\\ eu -o printer-is-shared=false" with administrator privileges
#Admin Printers.
#Reception Bonjour.
do shell script "lpadmin -p Reception -L Ground\\ Floor\\ Reception -E -v mdns://Reception%20%2892%3A1b%3A58%29.pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 4500DT.gz -o printer-is-shared=false" with administrator privileges
#A3_Northside Bonjour.
do shell script "lpadmin -p A3_Northside -L First\\ Floor\\ North\\ Side -E -v mdns://A3Northside._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 5500DN.gz -o printer-is-shared=false" with administrator privileges
#A3_Southside Bonjour.
do shell script "lpadmin -p A3_Southside -L First\\ Floor\\ South\\ Side -E -v mdns://A3Southside._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 5500DN.gz -o printer-is-shared=false" with administrator privileges
#Studio3_Admin Bonjour.
do shell script "lpadmin -p Studio3_Admin -L First\\ Floor\\ Studio\\ 4 -E -v mdns://Studio3Admin._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 4510DT.gz -o printer-is-shared=false" with administrator privileges
#Studio1_Admin Bonjour.
do shell script "lpadmin -p Studio1_Admin -L First\\ Floor\\ Studio\\ 1 -E -v mdns://Studio1Admin%20%2892%3A41%3Af6%29._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 4500DT.gz -o printer-is-shared=false" with administrator privileges
#Studio3_A3 Bonjour.
do shell script "lpadmin -p Studio3_A3 -L First\\ Floor\\ Studio\\ 4 -E -v mdns://Studio3A3._printer.tcp.local. -P /Library/printers/PPDs/Contents/Resources/HP\\ LaserJet\\ 5100\\ Series.gz -o printer-is-shared=false" with administrator privileges
#Plotters.
#PlotterDeathstarHP4500ps Bonjour.
do shell script "lpadmin -p PlotterDeathStarHP4500ps -L First\\ Floor\\ Print\\ Room -E -v mdns://PlotterDeathstar_HP4500ps._printer.tcp.local. -P /Library/printers/PPDs/Contents/Resources/HP\\ Designjet\\ 4500\\ PS3.gz -o printer-is-shared=false" with administrator privileges
#PlotterPosterEpson7600 Bonjour.
do shell script "lpadmin -p PlotterPosterEpson7600 -L First\\ Floor\\ Print\\ Room -E -v mdns://PlotterPosterEpson7600.printer.tcp.local. -P /Library/printers/PPDs/Contents/Resources/en.lproj/stp-escp2-7600.5.2.ppd.gz -o printer-is-shared=false" with administrator privileges
#Copy a fresh copy of the printer driver settings back onto the system after the printers have been installed. driver settings are stored in /etc/cups/PPD admin rights required to copy files into this folder
do shell script "cp -fRv /Volumes/ITsupport/01_Mac/04Printers/PrinterAutoInstall/ppd/* /etc/cups/PPD" with administrator privileges
#Copy printer presets on to system.
do shell script "cp -frv /Volumes/ITsupport/01_Mac/04Printers/PrinterAutoInstall/presets/* /Library/Preferences" with administrator privileges
#The following printer is added into the system speratly due to a driver selection issue when adding more than one Xerox Phaser 4510DT. The system seems to apply the correct driver to the first one that is added to the system. The second Xerox Phaser 4510DT does not get the correct driver applied to it.
#Studio2_Admin Bonjour.
do shell script "lpadmin -p Studio2_Admin -L First\\ Floor\\ Studio\\ 2 -E -v mdns://Studio2Admin._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 4510DT.gz -o printer-is-shared=false" with administrator privileges
#Copy printer presets on to system.
do shell script "cp -frv /Volumes/ITsupport/01_Mac/04Printers/PrinterAutoInstall/presets/* /Library/Preferences"
do shell script "cp -fRv /Volumes/ITsupport/01_Mac/04_Printers/PrinterAutoInstall/ppd/Studio2Admin.ppd /etc/cups/PPD/" with administrator privileges
#Reset file permissions
do shell script "chmod 664 /Library/Printers/PPDs/Contents/Resources/*" with administrator privileges

Well, I succeeded in solving the problem by myself ...
The problem was a local .cupsrc file containing some apparently wrong settings. Removing this file solved the problem ...

Can't delete printer - client-error-not-found

After messing around with the installation of a cups based network printer (via a local Suse server) I came across some strange problems with my printer setup utility. Currently, I can neither delete nor add a printer from the list for the current user. When trying to delete a previously installed network printer I get an error message that the printer could not be removed (client-error-not-found). When trying to add a new printer I won't get an error message, but the printer is not being added to the list anyhow.
I already tried to reset the printing system both with the printer setup utility and with the Printer Setup Repair Tool from Fixamac, both without success.
I have to note that for user root everything works fine!
Any suggestions?
Wolfgang
MacBook Pro Mac OS X (10.4.8)

Well, I succeeded in solving the problem by myself ...
The problem was a local .cupsrc file containing some apparently wrong settings. Removing this file solved the problem ...

Error: Not Found Error: Out of Memory

Hello,
I'm trying to use a few photoshop files in Final Cut Pro 7.0.3 and I can't seem to shake these error messages.
I've never had trouble using Photoshop files in the past but these ones are being uncooporative.
I've imported the .psd file and edited it into the sequence. The sequence setting match the clip settings. Then I've added the "Page Peel" Transition to the edit point. Immediately the canvas goes red and says something like "close and open window to restore preview." After this I try to play the sequence and it says "Error: Not Found." After closing and reopening the sequence my attempts to play back my work result in the error "Error: Not Found" followed immediately by "Out of Memory."
I opened activity monitor to try and see if I was running out of ram space and I've got loads left. I also have plenty of room on the hard disk I'm working from.
Any thoughts?
Thanks,
Ryan

Check your PSD documents, make sure they are RGB 8 Bits/Channel.
MtD

WCF Error: The remote server returned an error: Not Found

I have a windows phone8 app that utilizes a azure WCF service. I added the Servicereference to my project,when i call the service method it executes fine but getting the following error after executing:
System.ServiceModel.CommunicationException: The remote server returned an error: Not Found
Here's the code where my error's occuring (the error occurs on the 2nd line of code within the method(the line that contains "_result =
public string EndSendMessage(System.IAsyncResult result) {
                object[] _args = new object[0];
                string _result = ((string)(base.EndInvoke("SendMessage", _args, result)));
                return _result;
Any idea why this is happening?
Thanks.

Hi Narendramacha,
It may be have more than one possibility reasons. Did you try the service URL in the phone/emulator Internet Explorer to be sure the url is accessible ? About this error, I found some solutions , please refer to :
1.maxStringContentLength: http://stackoverflow.com/a/5185678
2.FireWall: http://stackoverflow.com/a/15594388
Please try it. Any results, please let me know.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Tasklist ERROR: Not Found

Hey all,
So I have a Windows 2008 server (32 Bit) and I'm trying to run Tasklist from the command prompt. When I do so, I recieve the "ERROR: Not Found" error. If I run it with the "?" flag then I do get the help file. I have done some searching
but haven't found any solutions that work.
I just finished running a check disk, which was the last option that I saw. I also restored the files from a different server that is working but it still isn't. I have reviewed my eventlogs but don't see any that might be associated with this
issue.
I just don't know where to go from here. Any suggestions??
Thanks...

Hi,
> So I have a Windows 2008 server (32 Bit) and I'm trying to run Tasklist from the command prompt. When I
> do so, I recieve the "ERROR: Not Found" error
Which user context did you run command prompt, administrator or normal users? Have you tried to run it with elevated command prompt?
Since you run Windows 2008 Server, you can find tasklist.exe in location “%windir%\system32\tasklist.exe”
Run command prompt with elevated privilege, and change command execute path to “%windir%\system32\”, then run tasklist.exe and check the result.
Also please check whether you can run “taskkill.exe” command?
Test that and give us feedback for further troubleshooting.
For more information please refer to following MS articles:
Tasklist
http://technet.microsoft.com/en-us/library/bb491010.aspx
Cannot Use Tasklist.exe Error: Not Found
http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/5da0e28e-24fb-4223-a548-372623f9b723
Hope this helps!
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support

Servlet not found(404) in linux

i have java1.4,tomcat3.3.1 and apache2. i want to connect tomat and apache using mod_jk in debian Linux. when i create a Test apllication in webapps called "TestApplication" with a class TestServlet.class.(this is just a Servlet class to print Hello Servlet)
when i request
http://localhost:8080/TestApplication/servlet/TestServlet
http://localhost:8080/TestApplication/servlet/TestServlet
i am getting servlet not found 404.
and also in the tomcat i am getting the following messages
-Ctx(/TestApplication)Class NotFound:TestServlet
-Ctx(/TestApplication)Status Code:404 request(TestApplication+/servlet+null) msg: null
JAVA_HOME=/opt/java
PATH=/opt/java/bin
TOMCAT_HOME=/opt/tomcat
and this is my web.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN"
"http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
<web-app>
<servlet>
<servlet-name>Servlet_TestServlet</servlet-name>
<display-name>Servlet TestServlet</display-name>
<description>Default configuration created for Servlet.</description>
<servlet-class>TestServlet</servlet-class>
</servlet>
<servlet-name>Servlet_TestServlet</servlet-name>
<url-pattern>/servlet/TestServlet</url-pattern>
</servlet-mapping>
<session-config>
<session-timeout>
30
</session-timeout>
</session-config>
</web-app>
and this is my mod_jk.conf file
<IfModule !mod_jk.c>
LoadModule jk_module /usr/lib/apache/1.3/mod_jk.so
</IfModule>
JkWorkersFile "/opt/tomcat/conf/jk/workers.properties"
JkLogFile "/opt/tomcat/logs/mod_jk.log"
JkLogLevel emerg
JkMount /admin ajp13
JkMount /admin/* ajp13
JkMount /examples ajp13
JkMount /examples/* ajp13
JkMount /TestApplication ajp13
JkMount /TestApplication/* ajp13
when i run tomcat it is showing this application as mounted.
i think i made everythig fine but i am getting not found 404 message.
can any one help me..

Servlets belong to the web-inf/classes dir.
In web-inf a web.xml file should be saved:
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
    PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
    "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<display-name>Welcome to Tomcat</display-name>
<description>
     Welcome to Tomcat
</description>
    <servlet-mapping>
        <servlet-name>invoker</servlet-name>
        <url-pattern>/servlet/*</url-pattern>
    </servlet-mapping>
</web-app>Andreas

[SOLVED] rEFInd -- Error: Not Found while loading vmlinuz-linux

System Info:
3.14.1-1-ARCH
refind-efi-0.7.8-1
Problem: rEFInd does not boot arch linux.
When booting the machine, rEFInd's gui selection menu presents options for windows or linux.
Upon selecting linux, the following is displayed:
rEFInd - Booting OS
Starting vmlinuz-linux
Using load options 'ro root=UUID=bd6b3352-1b79-4c70-a061-21ff87ff0772 initrd=\boot\initramfs-linux.img'
Invalid loader file!
Error: Not Found while loading vmlinuz-linux
* Hit any key to continue *
Below are the outputs of blkid, lsblk -f, the structure of /boot and cats of /boot/efi/EFI/refind/refind.conf and /boot/refind_linux.conf
blkid
/dev/sda1: UUID="2014-05-01-05-20-54-00" LABEL="ARCH_201405" TYPE="iso9660" PTUUID="1535e446" PTTYPE="dos" PARTUUID="1535e446-01"
/dev/sda2: SEC_TYPE="msdos" LABEL="ARCHISO_EFI" UUID="96ED-5DA9" TYPE="vfat" PARTUUID="1535e446-02"
/dev/sdb1: LABEL="Recovery" UUID="E63202B832028E2D" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="e3729f62-9c32-4ac9-a9dd-56a9c073e7e5"
/dev/sdb2: UUID="9C03-552D" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="9bcdb083-82e9-49e6-b03d-fd376585d633"
/dev/sdb4: UUID="B2161962161928BD" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="6de10de9-3322-486c-8108-bf14f5a7bcb6"
/dev/sdb5: UUID="bd6b3352-1b79-4c70-a061-21ff87ff0772" TYPE="ext4" PARTLABEL="root" PARTUUID="699115b1-1413-42b3-9fd7-a80a8a51b6fa"
/dev/sdb6: UUID="e71e6a25-913a-4932-9fc9-81942a5dab2e" TYPE="ext4" PARTLABEL="home" PARTUUID="1fc33e24-4c26-459c-a80a-9440e1f4e683"
/dev/loop0: TYPE="squashfs"
/dev/loop1: UUID="f07bfb26-3377-487a-a022-efd840614a0d" TYPE="ext4"
/dev/loop2: UUID="f07bfb26-3377-487a-a022-efd840614a0d" TYPE="ext4"
/dev/mapper/arch_root-image: UUID="f07bfb26-3377-487a-a022-efd840614a0d" TYPE="ext4"
/dev/sdb3: PARTLABEL="Microsoft reserved partition" PARTUUID="fa94c812-e1ff-4603-ba97-be7f155f12c8"
lsblk -f
NAME FSTYPE LABEL UUID MOUNTPOINT
sdb
├─sdb1
├─sdb2 /boot/efi
├─sdb3
├─sdb4
├─sdb5 /
└─sdb6 /home
sdc
├─sdc1
└─sdc2
loop0
loop1
└─arch_root-image /etc/resolv.conf
loop2
└─arch_root-image /etc/resolv.conf
Structure of /boot
*note: /boot is really the original microsoft efi system partition (in my case, /dev/sda2) that I mounted to /boot/efi and whose structure is shown below:
/boot
├── efi
│ ├── EFI
│ │ ├── Boot
│ │ │ └── bootx64.efi
│ │ ├── Microsoft
│ │ │ └── Boot
│ │ │ ├── BCD
│ │ │ ├── BCD.LOG
│ │ │ ├── BCD.LOG1
│ │ │ ├── BCD.LOG2
│ │ │ ├── bg-BG
│ │ │ │ ├── bootmgfw.efi.mui
│ │ │ │ └── bootmgr.efi.mui
│ │ │ ├── bootmgfw.efi
│ │ │ ├── bootmgr.efi
│ │ │ ├── BOOTSTAT.DAT
│ │ │ ├── boot.stl
│ │ │ ├── en-US
│ │ │ │ ├── bootmgfw.efi.mui
│ │ │ │ ├── bootmgr.efi.mui
│ │ │ │ └── memtest.efi.mui
│ │ │ ├── Fonts
│ │ │ │ ├── {{FONTS REMOVED FOR BREVITY}}
│ │ │ ├── Resources
│ │ │ │ ├── bootres.dll
│ │ │ │ └── en-US
│ │ │ │ └── bootres.dll.mui
│ │ ├── refind
│ │ │ ├── drivers_x64
│ │ │ │ └── ext4_x64.efi
│ │ │ ├── icons
│ │ │ │ ├── {{ICONS REMOVED FOR BREVITY}}
│ │ │ ├── keys
│ │ │ │ ├── altlinux.cer
│ │ │ │ ├── canonical-uefi-ca.der
│ │ │ │ ├── fedora-ca.cer
│ │ │ │ ├── openSUSE-UEFI-CA-Certificate.cer
│ │ │ │ ├── refind.cer
│ │ │ │ └── SLES-UEFI-CA-Certificate.cer
│ │ │ ├── refind.conf <=================== http://ix.io/cFy
│ │ │ └── refind_x64.efi
│ │ └── tools
│ ├── initramfs-linux-fallback.img
│ ├── initramfs-linux.img
│ └── vmlinuz-linux
└── refind_linux.conf <===================== http://ix.io/cFw
49 directories, 190 files
Excerpt of /boot/efi/EFI/refind/refind.conf
(full file available here: http://ix.io/cFy)
menuentry Linux {
icon EFI/refind/icons/os_arch.icns
volume "EFI system partition"
loader /boot/vmlinuz-linux
initrd /boot/initramfs-linux.img
options "ro root=UUID=bd6b3352-1b79-4c70-a061-21ff87ff0772"
cat /boot/refind_linux.conf
"Boot with standard options" "ro root=UUID=bd6b3352-1b79-4c70-a061-21ff87ff0772 "
"Boot to single-user mode" "ro root=UUID=bd6b3352-1b79-4c70-a061-21ff87ff0772 single"
"Boot with minimal options" "ro root=UUID=bd6b3352-1b79-4c70-a061-21ff87ff0772"
Last edited by dk0r (2014-05-28 01:36:16)

A couple of things that are important:
refind_linux.conf should be in the same directory as vmlinuz-linux and the initrd so it should be in /boot/ since that is where your kernel is.
In your refind.conf stanza you have the line volume "EFI system partition" which tells rEFInd that the loader is in that partition whereas the kernel and initrd files seem to be in /boot/ which is not the EFI System Partition. Hence the volume line needs to specify the filesystem where /boot is which in your case appears to be /dev/sdb5 so the volume line in that case should be volume "root" since root is the filesystem label for sdb5? Note that if you update to rEFInd version 0.8.0 or later then you can use the partuuid value to specify the volume but in the version you are using that token for the volume was not yet implemented.
In the stanza you quoted there was no terminating } but maybe you just didn't copy it to your post.
Making these changes may let the system boot to the arch kernel.
Last edited by mcloaked (2014-05-27 20:21:16)

404 Error (not found) for webfragment when running from OEPE (split source)

For a large project, we are developing several JSF modules as JARs which then become packaged inside a single WARs WEB-INF/lib, which in turn will be the only substantial part of an EAR.
When I build with maven / run from command line, everything works fine.
But when I run from OEPE using the split source structure (actually also when I run from command-line using the split source structure that OEPE has generated), all the JSF in the JARs are not found anymore, and I get a 404 Error in the browser.
I can reproduce the problem with a minimal set of almost-empty Eclipse projects (one WebFragment, one WAR, and an autogenerated EAR).
(too bad I can't attach it here)
The generated .beabuild.txt is as follows:
C\:/workspaces/weblogicear/WebFragmentWAR/WebContent = WebFragmentWAR.war
C\:/workspaces/weblogicear/WebFragmentWAR/build/weboutput = WebFragmentWAR.war
C\:/workspaces/weblogicear/WebFragmentWAR/build/classes = WebFragmentWAR.war/WEB-INF/classes
C\:/workspaces/weblogicear/WebFragment/bin = WebFragmentWAR.war/WEB-INF/lib/WebFragment.jar
Under WebFragment/bin/META-INF/resources I have an index.xhtml, which is not found by Weblogic's implementation of ExternalContext.
See also this thread (without answer): When web apps/war published via OEPE I get '404 Not found' on access I don't know if the original poster had the same problem. I tried to reply there, but my reply doesn't show up.

> The Testing Server Folder is:
D:\Inetpub\wwwroot\Zero-ten\www\
> The URL prefix is:
http://localhost/zero-ten/www/
> Is that the problem?
In the testing server folder you have a CAP Z
in the URL prefix you don't have a cap.
Also, would need to know more about your testing server
(what type) if there are additional problems.

Htmldb - Screen not found 404 error

I installed Htmldb on 10.2 database. It worked fine. After about two weeks I decided to copy a program from 1.6 to 2.0. Exported/imported pgm to 2.0. Pgm did not install. Left box running. 2 1/2 days later I get screen not found error. Htmldb will not come up. opmnctl startall and shutdown work fine. Http services, OEM work fine. I thought the password in the marvel.conf file was not working. I edited the marvel.conf, chged to htmldb, chged htmldb_public_user, flow_files, and flow_010600 password to htmldb. No difference. Must be something small. Any ideas on how to get htmldb up. If not, can I do an upgrade on htmldb to 2.0 and still retain all the work the developers have put on the box?

Is it not installed means in the import application u have to choose the schema name and then proceed ? If the schema name comes try to install it first ?
And for the second case dont mess up with marvel.conf .Its very important file for HTMLDB to come up in browser .Manual editing is very bad practice except the password and connectstring. It is most important to provide us the details before procees also with the details what Chris wants.
Regards
Rosy.

Error Not Found(404)

Similar Messages

Maybe you are looking for