Error: Not Found Error: Out of Memory

Hello,
I'm trying to use a few photoshop files in Final Cut Pro 7.0.3 and I can't seem to shake these error messages.
I've never had trouble using Photoshop files in the past but these ones are being uncooporative.
I've imported the .psd file and edited it into the sequence. The sequence setting match the clip settings. Then I've added the "Page Peel" Transition to the edit point. Immediately the canvas goes red and says something like "close and open window to restore preview." After this I try to play the sequence and it says "Error: Not Found." After closing and reopening the sequence my attempts to play back my work result in the error "Error: Not Found" followed immediately by "Out of Memory."
I opened activity monitor to try and see if I was running out of ram space and I've got loads left. I also have plenty of room on the hard disk I'm working from.
Any thoughts?
Thanks,
Ryan

Check your PSD documents, make sure they are RGB 8 Bits/Channel.
MtD

Similar Messages

Sequence not Opening: File not found and Out of Memory Error Message

Hello
Attempting to open sequence in FC gives me the error: File not found.
Clicking on okay in the message gives another error: Out of Memory.
Final Cut Pro version is 6.02
Anybody have a solution on how to get this sequence working again?
Thanks

Project itself opens fine.
Can a sequence file with in a project become corrupted?
Luckily, I always make duplicate of the sequence I'm working on at the start of the day. And I save often when I'm working.
The earlier duplicated version of the sequence works, so not everything is lost.
Unfortunately the auto save was disabled in my profile, back on it goes.
I was wondering if this has happened to anyone before and that if there is a fix - if it is not a corrupted file?

"Not Found" Error Message Problem

Hi All!
I have a really weird issue happening that I have not found a post for in the boards, although there are some similar ones. I have a video project that I had been working on about a month ago and finished except for credits (I had no problems while working on it then). I finally just got the list of names to use for the credits, so I went to open the project to add the credits and I got a "Not Found" and "Out Of Memory" Message. I have 134.6 Gigs open on the Raid I save everything to, so I know I'm not actually out of memory. So I changed the settings to 80% Application and 50% Stills b/c I have around 10 jpegs I was using for titles in it. That seemed to help at least get the sequence opened. I then had media offline messages for those titles, eventhough they are in the browser and defined as online, so I just reconnected each one individually anyway. That helped with that problem. However, I FCP won't render the transitions around the titles. I deleted the transitions and titles and tried to re-render the video clips that were involved in the transitions with the titles. It won't render those. When I try to view the clips in the viewer, I get the "Not Found" message again. I reconnected a couple of the video clips individually, but I still get the message when I try to view them in the Viewer. The clips in the sequence are there and play in the canvas but not in the viewer and I get the "Not Found" message. I have it set to view the image without wireframes, so that's not the problem. The source videos are read as online in the browser and are in the same place as they were when I originally started the project, so that's not the problem. I've tried different variations on the memory usage. I've tried copying and pasting to a new sequence but get the same problem. Does anyone know why all of a sudden I can't view any of my source video and the clips I used in my sequence in the viewer and why it would give me the "Not Found" error message?
Some Specs that might be helpful:
FCP HD 4.5
Dual 2 GHz PowerPC G5
2.5 Gigs DDR SDRAM
Raid 1 with 134.6 Gigs Available Space
SD NTSC DV Footage - MPG files I transfered originally from the client's portable hard drive
A Few JPGs of Photoshop Titles
I'm sorry this is insanely long, but I wanted to provide as much detail as I could.
Emily

They were originally on a PC. That quite possibly could be it.
I just checked all the titles again and they are all RGB.
Our Raid ocassionally has problems, so I'm thinking it might have something to do with that.
I'm going to try on Monday to just re-import the videos I need into the project and see how that goes. If anyone has any suggestions, I'll take a look on Monday and see what happens.
I was just hoping that someone might have had this problem and knew what to do.
Thanks for your help!

Tasklist ERROR: Not Found

Hey all,
So I have a Windows 2008 server (32 Bit) and I'm trying to run Tasklist from the command prompt. When I do so, I recieve the "ERROR: Not Found" error. If I run it with the "?" flag then I do get the help file. I have done some searching
but haven't found any solutions that work.
I just finished running a check disk, which was the last option that I saw. I also restored the files from a different server that is working but it still isn't. I have reviewed my eventlogs but don't see any that might be associated with this
issue.
I just don't know where to go from here. Any suggestions??
Thanks...

Hi,
> So I have a Windows 2008 server (32 Bit) and I'm trying to run Tasklist from the command prompt. When I
> do so, I recieve the "ERROR: Not Found" error
Which user context did you run command prompt, administrator or normal users? Have you tried to run it with elevated command prompt?
Since you run Windows 2008 Server, you can find tasklist.exe in location “%windir%\system32\tasklist.exe”
Run command prompt with elevated privilege, and change command execute path to “%windir%\system32\”, then run tasklist.exe and check the result.
Also please check whether you can run “taskkill.exe” command?
Test that and give us feedback for further troubleshooting.
For more information please refer to following MS articles:
Tasklist
http://technet.microsoft.com/en-us/library/bb491010.aspx
Cannot Use Tasklist.exe Error: Not Found
http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/5da0e28e-24fb-4223-a548-372623f9b723
Hope this helps!
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support

USB flash memory: "application not found" error

When recently trying to use a USB flash memory stick I was getting an "f:\ application not found" error. I tried all kinds of fixes from Microsoft. Turns out it was caused by Lightroom.
Since the memory stick had photos on it, my computer's Autoplay was trying to launch Lightroom. Problem is, Lightroom is listed as "Lightroom 4.0 64" in the Autoplay menu. I have Lightroom 4.4. As far as I can tell, there's no way I can fix the incorrect "Lightroom 4.0 64" listing. The solution is to remove Lightroom from any Autoplay options.
This is the second such problem I've had with Lightroom. The previous problem was right clicking on a photo file and trying to use the "open with" menu. It worked fine when I had Lightroom 4.3. After updating to Lightroom 4.4, it didn't work. Another Lightroom user found a workaround, which was to rename the Lightroom 4.4 folder back to Lightroom 4.3.
These are both lazy Adobe oversights. You have to realize all the Windows functions that will be affected with an update and make sure they are updated as well. I spent half a day solving this latest USB flash memory error. Get your updating act together.

You don't mention your OS or which version of Outlook you're using.
For Windows, this may be helpful:
http://www.winhelponline.com/articles/236/1/Unable-to-open-PDF-attachments-from-Windows-Ma il.html
Noel

Boot Device Not Found Error Message

I've had my laptop since May 2011. HP Pavilion dv6
Quad-Core AMD Phenom II 2.2 GHz
DDR3 SDRAM 8 GB
500 GB Serial ATA 7200 rpm hard drive.Originally Windows 7 64-bit upgraded to Windows 10 64-bit One morning I turned on my laptop and I received the following error. The laptop lives on my desk, hasn't undergone any major changes, and I haven't moved or dropped it. I've run every diagnostic test from the F2 menu. The hard drive and memory both passed, the system tune up passed, and I've restored the BIOS to the default settings with no changes. If I hold the power button and restart the laptop usually on the 2nd or 3rd attempt the system will start normally with no issues and continue on as if nothing is wrong. This is a helpful work around but it doesn't solve the problem which is a bit of an annoyance and leaves me worried that eventually it might refuse to start at all. Thinking that a system restore might help I ran a recovery and brought it to an "out of the box" state. After that failed I decided to go ahead and upgrade from Windows 7 to Windows 10. I performed a clean install keeping none of my programs or personal files. Despite a successful Windows 10 install I still receive the same error every time I restart. The short version:When I turn on my laptop I encounter a Boot Device Not Found Error Message.My hard drive passes diagnostic tests.My laptop will start eventually if I continue to power cycle it.

@pkharel ,
Hello and thank you for posting on the HP support forums. So that I can better help you here with this hard drive issue . Can you explain what diagnostic you ran on the hard drive.
Did you run the diagnostics from the BIOS?
HP Notebook PCs - System Diagnostics (F2)
HP PC Hardware Diagnostics
If you have attempted the diagnostics from the BIOS and are not finding the Hard drive. See if you can find the hard drive in another computer. If you can not find it using another computer replace the drive. If you can and it is not located on your notebook then you have a possible issue with the motherboard.
First thing I would do is try and restore your BIOS first.
Restoring the BIOS
After attempting this and you still can not find the Hard drive and you can see it in another system please contact HP phone support for repair options.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
If the hard drive is not detected in another system then replace hard drive.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

File not found error when tried to open Document ID settings page

Hi
when i open sitesettings>site collection administratin >Document
ID settings
it shows
file not found error
adil

Hi,
first we need to figure out the error. change the web.config so that you can see the error on browser
1) Obtain the complete call stack instead of the default error page:
<SafeMode MaxControls="200" CallStack="false"/>
to
<SChangeafeMode MaxControls="200" CallStack="true"/>
2) CustomeErrors mode value (in the system.web section) is set to Off:
<customErrors mode="On">
to
<customErrors mode="Off">
Change these value in "c:\inetpub\wssroot" CA dirctory web.config and
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS\web.config .
now again try to do the action. you will get the error on screen.
Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer

File Not Found Error running JSP demos

I'm not sure what is going on, but it appears that every time I try to run a jsp, the server looks in the document root where it errors out with a file not found error. I've seen others with this type of problem but I haven't seen a solution. Anyone have any ideas?
Thanks.

1: Double check the port number that your Tomcat Server is using. (TOMCAT_HOME/conf/server.xml).
2: check you IP. This is not the 'localhost' IP (not sure if it is LAN or real IP). So it may change dynamically.
3: Check for Firewalls. Also, since you are not using localhost, you will have to make sure you traverse all the firewalls built around your system. If you have a router (home), windows XP, or some other firewall, make sure the appropriate ports are opened. If you are behind a corporate firewall, or your ISP closes ports... your kinda out of luck until you find a way to cheat around them.
2: Try just using just "/ValidateUser.jsp" as long as it is one the same domain as the Form. This will make it less likely to break, should your IP change.

"file not found" error in VI Logger when running an imported VI Logger task

I'm having trouble getting all of my imported tasks to run in VI Logger.
I'm using VI Logger 2.0, with an SCXI-1100. The data acquisition tasks I import run fine. One of the VI Logger tasks I've imported runs OK, but the other one gives an error:
"Engine Error!
Error Code = 7
LabView: File not found. The file may have been moved or deleted, or the file path might be incorrectly formatted for the OS."
If I create a new VI Logger task, the new task works OK. And my 1st VI Logger task to be imported works OK. So I know my setup mostly works. But our company has never been able to figure out importing tasks very well, so I'm looking for help.
Question 1: What file is LabView looking for? I've checked my Export path and database path, and they are identical in both the working task and the non-working task.
Question 2: Where else might I look for the difference between the 2 VI Logger tasks? Neither task uses any weird characters in the name, both have analog input channels and calculated channels. And I've mixed and matched the data acquisition tasks with no change (the good VI Logger task will run with either data task, the bad VI Logger task won't run with either data task), so I'm pretty sure the problem is in the VI Logger task, and not the data task. I've also tried importing the 2nd task on its own, as a separate import function, but that gave the same error.
Thanks for the help in advance,
Jake

Hi Spex,
I can import the VI Logger task OK (from another PC running VI Logger 2.0), but I can't run the task. I've attached the file. The "1 channel" task runs OK. The "x-probe" task starts, takes 1 or 2 data points, then hangs for a few seconds, then pops up the "file not found" error. The data acquisition taks run OK, so I don't think they're the problem.
This file I've attached includes 2 good data tasks ("1 channel" and xprobe"), 1 good VI Logger task ("1 channel"), and my non-working VI Logger task ("x-probe", which works fine on the PC it was exported from).
I have also tried exporting the non-working VI Logger task on its own, and it still imports OK, but still doesn't run, and gives the same error.
Thanks,
Jake
Attachments:
configData1.zip ‏353 KB

Error accessing file template file not found (error code 2)

We have 3 admins that work on the website so we use the Check In/ Check Out feature of DW. We all have DW CS6.
When I update the template I have no problem (I work on a mac). However, if one of the other admins (Windows) tries he gets the following message: Error accessing file template file "C:\filepath\filename.dwt": file not found (error code 2).
I looked at this thread: Re: Dreamweaver Template not updating pages error code 2? but the only solution offered there is to change the template tag from <!-- InstanceBegin... to <!-- TemplateBegin... If this is the solution, how do you do this?
When I go to the url of the template http://www.christophorushouse.com.au/Templates/chrv-main-template.dwt it says it's been (re)moved or renamed, but then I have a feeling you can't view/access a template this way. All pages of the website feed of this template.
Any help would be appreciated.
Thanks

We have 3 admins that work on the website so we use the Check In/ Check Out feature of DW. We all have DW CS6.
When I update the template I have no problem (I work on a mac). However, if one of the other admins (Windows) tries he gets the following message: Error accessing file template file "C:\filepath\filename.dwt": file not found (error code 2).
I looked at this thread: Re: Dreamweaver Template not updating pages error code 2? but the only solution offered there is to change the template tag from <!-- InstanceBegin... to <!-- TemplateBegin... If this is the solution, how do you do this?
When I go to the url of the template http://www.christophorushouse.com.au/Templates/chrv-main-template.dwt it says it's been (re)moved or renamed, but then I have a feeling you can't view/access a template this way. All pages of the website feed of this template.
Any help would be appreciated.
Thanks

"Page not found" error while trying to run a page

Hello all,
I tried to run a page in JDeveloper(9.0.6.6_606) and after the browser page pops up, it is displaying "HTTP 404 : Page not found" error.
Please find the log below:
C:\jdevbin\jdk\bin\javaw.exe -ojvm -classpath C:\jdevbin\j2ee\home\oc4j.jar -mx256m -Dhttp.proxyHost=proxy -Dhttp.proxyPort=80 -Dhttp.nonProxyHosts=10.200.152.236|localhost -Xverify:none com.evermind.server.OC4JServer -config C:\jdevhome\jdev\system9.0.3.1.1107\oc4j-config\server.xml
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
[waiting for the server to complete its initialization...]
Embedded OC4J startup time: 7047 ms.
Oracle9iAS (9.0.3.0.0) Containers for J2EE initialized
Embedded OC4J startup time: 16 ms.
Target URL -- http://10.200.152.236:8988/OA_HTML/runregion.jsp?page=%2Foracle%2Fapps%2Fpos%2Faccount%2Fwebui%2FNonPoInvCreatePG&akAppShortName=POS&akDbcFile=FIN1DEV2&akDevMode=1&akDiag=1&akPassword=pwd4dev2&akRespKey=ISUPPLIER_PORTAL_RESP&akUsername=dpsdx48&JRAD_XML_PATH=C%3A%5Cjdevhome%5Cjdev%5Cmyclasses%5CJRADXML%5C&JRADStartTime=1152606872484
ApplicationServer: appName = bc4j
ApplicationServer: appName = current-workspace-app
ApplicationServer: appName = soap
Error creating the ORB :
Starting an OA Core session ...
ICX DIAGNOSTIC: application_id = 177
ICX DIAGNOSTIC: responsibility_id = 23075
ICX DIAGNOSTIC: security_group_id = 0
ICX DIAGNOSTIC: APPS Web agent = http://app-fin1dev2.albertsons.com:15160/pls/FIN1DEV2/
FIN1DEV2=C384A6C2A84C8E63FAA51365BA91681A;path=/;domain=.albertsons.com
ICX DIAGNOSTIC: mCookieHeader = FIN1DEV2=C384A6C2A84C8E63FAA51365BA91681A;path=/;domain=.albertsons.com
ICX_DIAGNOSTIC: mEncryptedSessionID = C384A6C2A84C8E63FAA51365BA91681A
ICX_DIAGNOSTIC: mSessionID = 687703439
TIME: runregion.sessionBean.createSession [87296 ms]
ICX_DIAGNOSTIC: mTransactionID = 78453
ICX_DIAGNOSTIC: encryptedTransactionID = C974A13EBB894B23
TIME: runregion.sessionBean.createTransaction [9672 ms]
TIME: runregion.rest [0 ms]
Is there anything you think I am missing in the configurations?
Kindly help.

I am also using OA Framework Jdeveloper....for ADF BC development.. Please find the log below:-
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
E:\jdeveloper\jdevhome\jdev\system\oracle.j2ee.10.1.3.39.81\embedded-oc4j\config>
E:\jdeveloper\jdevbin\jdk\bin\javaw.exe -client -classpath E:\jdeveloper\jdevbin\j2ee\home\oc4j.jar;E:\jdeveloper\jdevbin\jdev\lib\jdev-oc4j-embedded.jar
-Xverify:none -DcheckForUpdates=adminClientOnly -Doracle.application.environment=development -Doracle.j2ee.dont.use.memory.archive=true
-Doracle.j2ee.http.socket.timeout=500 -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config
E:\jdeveloper\jdevhome\jdev\system\oracle.j2ee.10.1.3.39.81\embedded-oc4j\config\server.xml
[waiting for the server to complete its initialization...]
Oct 18, 2007 11:56:47 AM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering transactions (commit 0) (rollback 0) (prepared 0).
Oct 18, 2007 11:56:47 AM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering local transactions Queue[jms/Oc4jJmsExceptionQueue].
WARNING: Code-source E:\jdeveloper\jdevbin\jdev\appslibrt\xml.jar (from <library> in
/E:/jdeveloper/jdevhome/jdev/system/oracle.j2ee.10.1.3.39.81/embedded-oc4j/config/application.xml) has the same filename but is not identical to
/E:/jdeveloper/jdevbin/lib/xml.jar (from <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in E:\jdeveloper\jdevbin\j2ee\home\oc4j.jar). If it
contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader default.root:0.0.0.
WARNING: Code-source E:\jdeveloper\jdevbin\jdev\appslibrt\jazn.jar (from <library> in
/E:/jdeveloper/jdevhome/jdev/system/oracle.j2ee.10.1.3.39.81/embedded-oc4j/config/application.xml) has the same filename but is not identical to
/E:/jdeveloper/jdevbin/j2ee/home/jazn.jar (from <code-source> in META-INF/boot.xml in E:\jdeveloper\jdevbin\j2ee\home\oc4j.jar). If it contains different
versions of the same classes, it will be masked as the latter is already visible in the search path of loader default.root:0.0.0.
WARNING: Code-source E:\jdeveloper\jdevbin\jdev\appslibrt\jazncore.jar (from manifest of /E:/jdeveloper/jdevbin/jdev/appslibrt/jazn.jar) has the same
filename but is not identical to /E:/jdeveloper/jdevbin/j2ee/home/jazncore.jar (from <code-source> in META-INF/boot.xml in
E:\jdeveloper\jdevbin\j2ee\home\oc4j.jar). If it contains different versions of the same classes, it will be masked as the latter is already visible in the
search path of loader default.root:0.0.0.
WARNING: Code-source E:\jdeveloper\jdevhome\jdev\system\oracle.j2ee.10.1.3.39.81\embedded-oc4j\applications\datatags\webapp\WEB-INF\lib\uix2.jar (from
WEB-INF/lib/ directory in E:\jdeveloper\jdevhome\jdev\system\oracle.j2ee.10.1.3.39.81\embedded-oc4j\applications\datatags\webapp\WEB-INF\lib) has the same
filename but is not identical to /E:/jdeveloper/jdevbin/jdev/appslibrt/uix2.jar (from <library> in
/E:/jdeveloper/jdevhome/jdev/system/oracle.j2ee.10.1.3.39.81/embedded-oc4j/config/application.xml). If it contains different versions of the same classes, it
will be masked as the latter is already visible in the search path of loader datatags.web.webapp:0.0.0.
Ready message received from Oc4jNotifier.
Embedded OC4J startup time: 19594 ms.
Target URL--- http://hydhtcl33997.ad.infosys.com:8988/SRTutorialADFBC-UserInterface-context-root/faces/app/SRList.jspx
07/10/18 11:56:56 Oracle Containers for J2EE 10g (10.1.3.1.0) initialized

Reading .txt file into char array, file not found error. (Basic IO)

Iv been having some trouble with reading characters from a text file into a char array. I havnt been learning io for very long but i think im getting the hang of it. Reading and writing raw bytes
and things like that. But i wanted to try using java.io.FileReader to read characters for a change and im having problems with file not found errors. here is the code.
try
File theFile = new File("Mr.DocumentReadMe.txt");
String path = theFile.getCanonicalPath();
FileReader readMe = new FileReader(path);
char buffer[] = new char[(int)theFile.length()];
int readData = 0;
while(readData != -1)
readData = readMe.read(buffer);
jEditorPane1.setText(String.valueOf(buffer));
catch(Exception e)
JOptionPane.showMessageDialog(null, e,
"Error!", JOptionPane.ERROR_MESSAGE);
The error is: java.io.FileNotFoundException: C:\Users\Kaylan\Documents\NetBeansProjects\Mr.Document\dist\Mr.DocumentReadMe.txt (The system cannot find the file specified)
The text file is saved in the projects dist folder. I have tried saving it elsewhere and get the same error with a different pathname.
I can use JFileChooser to get a file and read it into a char array with no problem, why doesnt it work when i specify the path manually in the code?

Well the file clearly isn't there. Maybe it has a .txt.txt extensionthat Windows is kindly hiding from you - check its Properties.
But:
String path = theFile.getCanonicalPath();
FileReader readMe = new FileReader(path);You don't need all that. Just:
FileReader readMe = new FileReader(theFile);And:
char buffer[] = new char[(int)theFile.length()];You don't need a buffer the size of the file, this is bad practice. Use 8192 or whatever.
while(readData != -1)
readData = readMe.read(buffer);
}That doesn't make sense. Read the data into the buffer and repeat until you get EOF? and do nothing with the contents of the buffer? The canonical read loop in Java goes like this:
while ((count = in.read(buffer)) > 0)
out.write(buffer, 0, count); // or do something else with buffer[0..count-1].
jEditorPane1.setText(String.valueOf(buffer));Bzzt. That won't give you the content of 'buffer'. Use new String(buffer, 0, count) at least.

TS3297 I have installed, reinstalled, repaired, retarted and followed all trouble-shooting tasks; Now I am getting "Apple Supprt Application not found: error 2(Windows 5). Please uninstall and reinstall itunes. I have done that. It is listed in my progra

I am trying to install itunes on my computer (Windows Vista). After initial instillation I got an error 42404 A required itunes componenet is not installed; please repair or re-intall itunes and error 50, cannot access itunes store at this time. Please try later. I have done that multiple times; uninstalled all components, reinstalled all components, repaired all components, restarted my computer. I have changed firewall settings to allow acess to all of the apple components. I have made sure the required ports are open. All of the components are showing on the installed programs section of my control panel.
I am now getting an error message that says that Apple Support Application is not found error 2 (windows 5). It is listed in the installed programs and I have repaired it.
I am out of options. And help would be appreciated.

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

Arghhhhhhhhhhhhhhhhhhh!!!!!!
After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive. But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
Words, almost, fail me.

Class not found error for applet.

This is probally a really simple mistake but I've tried everything and can't find it.
My applet works fine with applet viewer - I'm running it from JBuilder. But when I open my html file in the browser it gives me a 'Class not found' error. I've tried running other applets (my own and demos on this site) and they work fine.This is the applet tag code:
<applet code = "Rotary.class" width = "650" height = "580" align = "top">

<param name = "sector0" value ="234,215,244,207,154,43,125,63">
</applet>
The class file is in the same directory as the HTML file. Do I need to specify the codebase? I tried that too - giving it the full pathname of the class.
In the Java console it said that it couldn't find "C:Project\Rotary\javax\swing\japplet"
I don't think it could have anything to do with the fact that I'm using swing because the other applets I used used swing.
Please help - I'm really running out of ideas here!

You have a similar problem like I had.
You seem to have a too old JAVA environment for the browser - I had a too new environment.
For all who are experiencing the same problem!
Problem:
You're compiling your applets with a quiet modern compiler (i.e. Netbeans Version 3.5.1)
You are able to compile your applets without any problems but if you try your applets in "real life", the browsers can't interpret your applets [class not found]. (I tested Internet Explorer 6.0 and Netscape Navigator 4.7)
So you need a plugin for the new JAVA environment because the JAVA environment of the browser is older than that which the applet needs.
Well, you have the choice to demand to every user of your applet to download the new Java Runtime Environment, but then don't wonder why nobody visits your site!
But, don't worry: I figuered out another solution, that Netbeans (www.netbeans.org) allows to compile in different JAVA versions.
Solution:
What you have to do is:
- Install a previous version of JDK (i.e. JDK 1.3 - I would suggest, lower versions don't work with Netbeans 3.5.1 and JDK 1.3 is enough for IE 6.0 and NN 4.7, which I tested)
- Go into the "bin"-directory of Netbeans (i.e. c:/netbeans3.5.1/bin)
- Open the file "ide.cfg" (with notepad or any other texteditor)
- You see a line like: jdkhome "C:\java\j2sdk1.4.2" -J-Xmx96m -J-Xss1024k -J-Xms24m -J-Xverify:none
- Change the path to your other JDK you wish, like: jdkhome "C:\java\jdk1.3" -J-Xmx96m -J-Xss1024k -J-Xms24m -J-Xverify:none
- That's it, you can compile your applets in a previous version of JAVA so that "older" browser user don't have to install a plugin for the new JAVA environment.
Have fun!
If you have any questions I would be pleased to help you.
If this tip helped you already I would be pleased if you would send me a quick email with your experience.
My email: [email protected]

Error: Not Found Error: Out of Memory

Similar Messages

Maybe you are looking for