Error Notification when Running Reports from InfoView

Post Author: jefegrande
CA Forum: Administration
Is there any way to have infoview notify a user/s if a scheduled report fails for any reason. I haven't been able to find anything on this matter.
Thanks.
Mark F.

Post Author: amr_foci
CA Forum: Administration
i think you may need to configure an audit server for some servrices on the business objects enterprise
look for how u make an audit
good luck

Similar Messages

When run report from form(6i) on the web,error FRM-921000

While I was trying to run report from form (6i)on the web,it will give me this error
message FRM-921000 and hang.
But when I try to call form using form,I do
not have the problem.
May I know ehat is the cause?
Anybody encounter this before?
Thanks
null

I am running Forms 6i on the web and attempting to call me report via RUN_REPORT_OBJECT. I am getting the same error as Jenny FRM-92100. I need to pass a parameter list so I don't think I can use WEB.SHOW_DOCUMENT. Any ideas???
Thanks,
Jenny N.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Joseph Schwertner ([email protected]):
Dear Jenny,
I am running reports from Forms 6i on the WEB. I did not encounter your problem. Nevertheless I would like to share the following with you.
RUN_PRODUCT doesn't work for calling reports ON THE WEB. Instead using RUN_PRODUCT do the following:
1. Install Oracle Reports Server
2. For WEB calls of reports use WEB.SHOW_DOCUMENT
3. Learn how to pass parameters to the reports. It is a litlle bit strange, but it is explaint excellent in the documentation to the Reports Server.
I hope this will help you.
Joseph Schwertner
<HR></BLOCKQUOTE>
null

OAS in Unix: URL not found when run report from Form???? please help

Hi,
We have succesfully install OAS with Form Server and Report Server in
Unix. We able to run Form and Report direct from browser. But we having
problem to run Report from direct Form within the browser. The message from
the browser was 'The requested URL was not found'. We use run_product to run
report from form. Below is the statement:-
Run_Product(REPORTS, 'A10001', SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id,
NULL);
Does anyone have an idea??
Thanks in advance.
null

please check env. variables
1. FORMS60_MAPPING
2. FORMS60_OUTOUT
FORMS60_MAPPING should point to vartual directory on your forms webserver
FORMS60_OUTPUT should point to physical
directory path of vartual directory
FORMS60_MAPPING
regards
Darshan
[email protected]
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by leong([email protected]):
Hi,
We have succesfully install OAS with Form Server and Report Server in
Unix. We able to run Form and Report direct from browser. But we having
problem to run Report from direct Form within the browser. The message from
the browser was 'The requested URL was not found'. We use run_product to run
report from form. Below is the statement:-
Run_Product(REPORTS, 'A10001', SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id,
NULL);
Does anyone have an idea??
Thanks in advance.
<HR></BLOCKQUOTE>
null

Getting zero-sized reply error when running report from SQL query

Hi,
I have a Report from SQL Query in Portal. When I select Excel in Output Format and then run the report, it works properly, but when I select HTML in Output Format, the report works if the rows returned are not so many (I've been able to display the report for up to 701 rows), but when I try selecting a value from the LOV that selects many rows, I get the following error:
ERROR
The requested URL could not be retrieved
While trying to retrieve the URL: <data suppressed>
The following error was encountered:
Zero Sized Reply
Squid did not receive any data for this request.
Any ideas on how to fix this? Why does the number of rows returned affect the report this way?
Thanks,
Lorena

Problem comes when any of the filter is applied in any one of the cases selected from the GUI.Do you mean that the problems only shows when you run the report in your browser via 9iAS?
Which version are you using?
Can you post the before report trigger?

Proxy error when running reports in Infoview

We are running XI 3.1 sp4 and are getting a Proxy error on some reports when running in PDF mode. Any ideas?
Here's the error:
Proxy Error
The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request GET /AnalyticalReporting/ViewAsPDF/Disposition Analysis Report.pdf.
Reason: Error reading from remote server
Apache Server at preprod.nalts.com Port 443

Hi Sylvia,
It seems that the reverse proxy you are using: Apache could have problems with the sessions of the users. I have seen the same behaviour with other Load Balancers. If you have different WAS in the backend, make sure they stay with the same WAS (session affinity).
Regards,
Julian

Internal server error when running report from form

i am getting the following error when I run a report from a form using 9i:
java.lang.NumberFormatException: mgb_5
this is my code:
DECLARE
repid REPORT_OBJECT;
vc_rep VARCHAR2(20);
vc_URL VARCHAR2(100);
vc_rep_job VARCHAR2(10);
BEGIN
repid := find_report_object('rep2');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,'C:\uni\mdt\cw1\rep2.rdf');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_EXECUTION_MODE, RUNTIME);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESTYPE, CACHE);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESFORMAT, 'htmlcss');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_SERVER,'rep_mgb');
vc_rep := RUN_REPORT_OBJECT(repid);
vc_rep_job := substr(vc_rep,instr(vc_rep,'_')+1);
vc_URL := '/reports/rwservlet/getjobid' ||vc_rep_job||'?server='||get_report_object_property (repid,report_server);
web.show_document(vc_url, '_blank');
END;

Michael,
print out "vc_rep_job" to a message or alert to see if this contains a valid number. If this shows as a valid number try to manually type the access URL into a browser URL field. If this shows then you have a hidden character within your URL.
The PLSQL code looks okay.
Frank

ORA-44356 when running report from Oracle Application Server 10g

All,
We have some reports that we developed using Reports Builder 10g. We use a few program units that run with every record that use the exec_sql package to run dynamic sql in a remote database. Everything runs fine when we test the reports in Reports Builder. After we compile the reports into the .rep format and place them on our Oracle Application Server 10g portal instance, we are running into the subject error when we try to run the report from the website. From the research that I've done, it seems that this error has to do with the use of exec_sql, but there is not too much info on the web regarding this error number. Running a trace when running the report in Reports Builder doesn't show any errors, and to further complicate things, this error only occurs on some reports...others that use the exec_sql package work fine.
Does anyone have any ideas as to why this might be happening?
Thanks for your help,
Tom

Nothing is different between the reports in the exec_sql section. The strange part is that the reports will bomb out seemingly at random, at different times, and during the execution of different program units. I was able to find a work-around using DB Links, but I'd rather not use the DB Link if I can avoid it.

Error 401 when run report "RSCMST" to test my content server

when I run report "RSCMST" to test the my content server. I get the error:
header HTTP/1.1 401 Authorization Required
date: Fri, 05 Dec 2008 20:20:45 GMT
server: Apache/1.3.41 (Unix) SAPCS/640
x-servertime: 20:20:45
x-query: create&pVersion=0046&contRep=ZTEST001&docId=020D3949CA03445AE10000000A14022B&compId=data&docPro ..
t=rud&accessMode=c&authId=CN%3DCPJ&expiration=20081205142027&secKey=MIH3BgkqhkiG9w0BBwKggekwgeYC
x-serverdate: 2008-12-05
x-pversion: 0046
x-errordescription: URI signature has expired
x-serverid: server="content01.ivo.com.cn";serverPort="1090"
x-servertype: SAP HTTP Content Server
content-length: 752
connection: close
content-type: text/plain
~remote_addr:
~uri_scheme_expanded: NONE
want 201
bad 401
time 17.974
It seems that the "bad 401" means a http error. I do not know how to configure it ?
my content server uses the maxdb, and http is apache, they are all running on redhat linux ese 5
who can give me some advices? thanks

hello,
I am also getting same problem with newly installed content server.
I have defined connectivity through CSADMIN. but when I 'm running this report I 'm getting same
time (-93) problem.
Could you please tell me how you rectified time zone setting problem..
would be great help..
Regards
Anju

Numbers are not formatted when run report from EBS

I am opening a new thread to solve my problem of formatting the number in xml report
I dont understand i format the field number in rtf template and the number is displayed correctly when i preview it in pdf.
The situation is like this :
1. i have a field which calculate the sum for every page.
i am using this code to calculte the sum for every page
*<?if:(position()>=$start) and (position()<($start+$lpp))?>*
*<?xdoxslt:set_variable($_XDOCTX,’var’,xdoxslt:get_variable($_XDOCTX,var’)+translate(CF_amount,',',''))?>*
*<?end if?>*
and i diplay this field in this way
*<? format-number: xdoxslt:get_variable($_XDOCTX,’var'); '999G999D99' ?>*
When i preview it from word this sum is displayed correctly : 444,444.34
But when i run this report from ebs the sum amount is displayed like this 444,44434 wich means that the dot is nt displayed .
Can anyone tell me what am doing wrong or how can i resolve this problem ?
Thanks in advance
REgards

Hi,
Check your previous thread , i responded there ;)
Regards,
Colectionaru

Oracle Report Font problem when run report from oracle EBS R12

Dear All
I have developed one Report in ORACLE REPORT BUILDER in windows environment. I see the output of that report, its ok, I deployed it on the EBS R12 which is on Linux environment, when i see the output, its fonts totally change and due to change in fonts, output not same as like in previous stage. When i print from dot matrix Printer then sometime its shrink the character and sometime break the output..
Kindly help me in this regard, because this problem i am facing from last few days.
i am waiting for your quick response.
Thanks in advance....
Regards,
Nawaz
Edited by: Haq Nawaz on Nov 5, 2012 11:45 AM

Thank you very much for your reply
I have changed the fonts in the report, but when i run it from the EBS its has the same problem. from the EBS output font look like as (COURIER) rather than CALIBRI WESTERN.
tell me what i have to change anything.

Backend BW roles for users needed when running reports in infoview?

Hello all,
We are using SAP BI Queries as the sources of our universes, the user is going to logon to infoview to run report in webi. We have created some access levels in CMC to restrict users, the question is - the user will still need some kind of backend BW roles to have access to the BI query that is developed in BW system right? That way the user can fetch data?
Let me know
Thanks in advance.

Hi,
If you are using SAP Authentication and Single sign on option in universe connection, the users must have sufficient roles to access SAP BW database.
if not, the only user login which you create during connection creation having roles to access to BW database is enough. In this case, the user can login to Infoview using any user and can access the report if he has priveleges to the report.
Hope this helps!

Error message when running report S_ALR_87012375

I am running report S_ALR_87012375 to generate an Australian Business Activity Statement and get the following message:
For fiscal year variant V6, period 00 is not defined
Message no. F5559
Does anyone know what this means. I have checked the Fiscal Year Variant which appears to be configured correctly and also that is is assigned to my company code.
Thanks for your assistance.

Hi,
Report S_ALR_87012375 is for "Print Program:Adv.Return for SalesTx" and not for "Australian Business Activity Statement"
Also check whether you are entering the period 00 on the selection screen.
Regards,
Gaurav

Getting Database Logon Prompt when trying to run report from Infoview

I have a user who has 2 Crystal reports loaded in InfoView. The reports are similar except for the parameters. When scheduling one of the reports, she is being prompted with the database logon information everytime she tries to enter the parameters. But on the other, she isn't. All she is prompted with is the parameters of the report. Which setting in InfoView or CMC controls the database logon prompt? We are on BOE 11.5.
Thanks,
Maureen

Dynamic Parameters. You'll want to get all your report designers up on this topic.
When you create a dynamic parameter in a Crystal Report, and then publish it to the Enterprise, you are creating a Business View, with all it's underlying necessary layers. Dynamic Parameters exist to be able to use the same LOV (a list of current customers) from a database for more than one report. These dynamic parameter LOVs act like a mini report that runs against the database and gets the current values for selection, then the selection(s) are used to run the overall report.
So I create a report, and in it I create a dynamic Customer LOV. When I save it, the Enterprise creates a Data Connection (DC), Data Foundation (DF), Business Element (BE), Business View (BV), and the list of values is built on the Prompt Group. So, my Business View Manager, Repository Explorer will show (in the default Dynamic Cascading Prompts folder):
Customer_DC
Customer_DF
Customer_BE
Customer_BV
Customer - Prompt Group
Customer (the LOV)
The idea is that next time I create a report and need a customer parameter, I select the existing dynamic group. If the report designer is unaware of this, and next time they create a new report that needs a customer LOV, they creates a new dynamic LOV "Customer", when saved to the Enterprise, it repeats the above. Since repository objects must have unique names, you will now have additional items something like:
Customer 2_DC
Customer 2_DF
Customer 2_BE
Customer 2_BV
Customer 2 - Prompt Group
Customer 2 (the LOV)
So you can see how that folder will get filled with duplicates pretty quickly. Which ones were created and used in which reports? Have to open the report in Crystal Reports, open the parameter for Edit and verify the LOV name (_2, _3, _4, etc). If you do in fact discover there are dupes, you can change it to a single one for all reports using a dynamic LOV, re-save them to the Enterprise, then delete the dupes in the BVM.
You've already discovered how to use the BVM to update the data connection to include/save the database credentials. The only other common issue is sometimes the LOV rights need to be changed in order to allow users to "Edit" the LOV (select different values in the LOV). You'd have to run the report as an end user, not the admin account or the report designer account to verify that works.
Another item of note is that these dynamic LOVs are run by the Report Application Server (RAS), regardless of which viewer you are using.
The Business View Manager administration guide has more information on the subject.

Database connection error when running report from web application

Hi all,
When I open a report in Reports Builder , and enter the database connection parameters, everything works fine. When I run my web application from JDeveloper (9.0.5.1), and I tried to run a report, I get this error:
Rep-501 : Unable to connect to the specified database.
I have ran tnsping, and it works fine. My tnsnames.ora file looks like this :
GPGWL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1522))
(CONNECT_DATA =
(SERVICE_NAME = GPGWL)
)

Please ask this question in Jdeveloper forum.

Error when running report from form

When i press on the button in form to run the report i get:
Microsoft Visual C++ Runtime library
Runtime Error!
Programm C:\Oracle\DB9iDS\bin\ifweb90.exe
abnormal program termination
What could be the problem?

I just installed the new patch. But now OC4J won't start -i get "-jar: illegal argument":
C:\Program Files\Common Files\System\Mapi\1060\NT>C:\oracle\livo9iDS\jdk\bin\jav
a -Dorg.omg.CORBA.ORBClass=com.inprise.vbroker.orb.ORB -Dorg.omg.CORBA.ORBSingle
tonClass=com.inprise.vbroker.orb.ORB -Doracle.security.jazn.config=C:\oracle\liv
o9iDS\j2ee\Oracle9iDS\config\jazn.xml -Doracle.home=C:\oracle\livo9iDS -DORACLE_
HOME=C:\oracle\livo9iDS -jar C:\oracle\livo9iDS\j2ee\home\oc4j.jar -userThreads
-config C:\oracle\livo9iDS\j2ee\Oracle9iDS\config\server.xml
-jar: illegal argument
usage: java [-options] class
where options include:
-help print out this message
-version print out the build version
-v -verbose turn on verbose mode
-debug enable remote JAVA debugging
-noasyncgc don't allow asynchronous garbage collection
-verbosegc print a message when garbage collection occurs
-noclassgc disable class garbage collection
-ss<number> set the maximum native stack size for any thread
-oss<number> set the maximum Java stack size for any thread
-ms<number> set the initial Java heap size
-mx<number> set the maximum Java heap size
-classpath <directories separated by semicolons>
list directories in which to look for classes
-prof[:<file>] output profiling data to .\java.prof or .\<file>
-verify verify all classes when read in
-verifyremote verify classes read in over the network [default]
-noverify do not verify any class
-nojit disable JIT compiler

Error Notification when Running Reports from InfoView

Similar Messages

Maybe you are looking for