Error NSURLE-error domain 1005

I am operating off Alltell for my internet hook up and am trying to load Apple software updates. Before a subject is finished I get the following error message. Error NSURLE error domain-1005 make sure you can connect to the internet. This is while the Alltell hookup is connected and working. Any suggestions?

Are you using Software Update? if so try getting them at...
http://www.apple.com/support/downloads/
Also, what are your ping times to apple,com?

Similar Messages

NSURL error domain 1012?

Hello, I bought a new IMac yesterday... I just set it up and haven't installed any apps or programs just yet and I haven't installed any anti virus just yet.... When I go into the Mac App Store it shows there are updates on the update tab... But when I click on it, it shows the following error "NSURL ERROR DOMAIN 1012 the operation couldn't be completed " it is been the same since yesterday and I want to update from OSX 10.9 to 10.9.3... PLEASE. I NEED HELP! Thank you

This error message has been coming up for several hours for people now. Searching the forum, people say it is a Apple Server problem.
Only thing to do is to be patient, and try again later.
Here is a link to download 10.9.3 Update (Combo) manually:
http://support.apple.com/kb/DL1746.

My Apple Store App has locked up when trying to download and install upgrade 10.9.3. I get an error message NSURLE ERROR Domain error - 1012

When attempting to upgrade to 10.9.3 my Aple Store app locked up and gave me an error code of NSURLE ERROR Domain error-1012. It still thinks I need the upgrade even thogh I have successfully downloaded and installed it through another source. How can I correct this?

Hi,
That's because the download on the App store is to bussy.
I hat yersterday the same message ... after a fuw hours everything whas back to normal.
This is NOT your Mac or internet connection.
Dimaxum

HT5568 Error message: "(NSURL Error Domain error -3001.) (102)"

I tried to install ths Safari 6.0.2 update, but I received the following error message:
"An Error has occurred - The operation couldn't be completed (NSURL Error Domain error -3001.) (102)"
Could anyone help me to solve this error?

I had the same problem. Just download update directy manually and install it form here:
http://swcdn.apple.com/content/downloads/53/02/041-8081/2jwp4wjrwygtm4lc608qy4h0 n4a9yyq37g/Safari6.0.2Mountain.pkg

ERROR: No valid domain present

While installing OATS in custom mode. getting the below error in deploy.log. kindly suggest as to what can be done.
ERROR: No valid domain present
And also Observed this in the "config_ds.log" file .
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Error: readTemplate() failed. Do dumpStack() to see details.
Problem invoking WLST - Traceback (innermost last):
File "C:\OracleATS\bin\..\bin\config_ds_offline.py", line 1, in ?
File "C:\Users\aime1\AppData\Local\Temp\WLSTOfflineIni7083857516903294319.py", line 17, in readTemplate
The template to read must be a jar file containing a valid domain configuration
at com.oracle.cie.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:51)
at com.oracle.cie.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1538)
at com.oracle.cie.domain.script.jython.WLScriptContext.readTemplate(WLScriptContext.java:340)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.ScriptException: unable to parse "template-info.xml" from template jar "/install/domain/oats.jar
The template to read must be a jar file containing a valid domain configuration
Thanks,
Pradeep

Many thanks Praveen,
I have carried out all the checks in the tables and it seems that everything is fine!.
Creating a RFC Destication for CRM in R/3
Maintain Table CRMRFCPAR and CRMCONSUM?
In Table CRMPAROLTP, Parameter "crm release" should set to your CRM version ( ex 500 for crm 5.0)
Maintain table TBE11, APPI should be NDI(new dimension integration),A yes
I don't really know where the error could lay.
Andrea

Yahoo email account on iphone 4s error message MFMessageError Domain error 1032 keeps coming up trying to log into my email. Why does this happen?

I'm trying to log in to my yahoo email account on iphone 4s and the error message MFMessage Domain error 1032 keeps on coming up. Why is this happening and how can I fix it?

What worked for me was resetting my password on my email then rebooted my iPhone 4S.

JDev 11g update 1 base edition on windows: error building default domain

Hi all,
(refer to [url http://forums.oracle.com/forums/thread.jspa?messageID=3168105]here for original post)
I'm posting this again with some more information. When downloading the Studio Edition (Base - no JDK) version of JDeveloper 11g update 1, an error occurs upon first (and each subsequent) startup of JDeveloper (error details below).
Tests that I have done:
1). Install using JDK 6 u 11 - JDK did not show up automatically in the installer, had to browse to find it and select it. Running using 6u11, 6u10, and 6u7 (deleting the system directory after each try) - error occurs.
2). Install using JDK 6 u7 - JDK was automatically found by the installer. Running using 6u7, 6u11, and 6u10 (deleting the system directory after each try) - error occurs
These errors do not occur when using the Windows installer. For information: my machine is Windows 2008 Server Standard 32-bit. An update - I just tried this on a Vista 64-bit laptop (running Sun 32-bit JDK 6u10) and did not have the problem. Ergo, this seems to be an issue with the JDK and detecting Windows 2008 as a Windows platform (or possibly with whatever mechanism JDev/WLS is using to detect the OS platform). I'll do more research on that and update if I find anything.
One more update: I didn't find any issues reported like this related to Windows 2008, but I did one more test: install and run JDeveloper using:
java version "1.6.0_05"
Java(TM) SE Runtime Environment (build 1.6.0_05-b13)
BEA JRockit(R) (build R27.6.0-50_o-100423-1.6.0_05-20080626-2105-windows-ia32, compiled mode)                                                                   The issue does not occur using this JDK. So to summarize, installing JDev 11g update 1 Studio edition, base installer using any of the SUN JDK's on Windows 2008 gives this problem. Using the windows installer or JRockit Mission Control JVM - no problems.
Finally, one last update - the error is related to the JVM that is used to install, not the one used to run JDeveloper (via editing jdev.conf) - the offending JDK is in wlserver_10.3\common\bin\commEnv.cmd. Seems like a no-no to have one JDK running JDev and another running the integrated WLS, though. Quite a pity, as JDev starts up pretty slowly using JRockit Mission Control.
JRockit Realtime seems to be a bit faster... sigh - now to remove the 72 extra JDK's on my laptop ;)
My going forward plan: use the Windows installer. Wish I never installed Windows Server 2008.
Now for the error details; the log shows:
ERROR: An error occurred while building the default domain.
Please see this log file for more details:
C:\o\jdev11\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee.adrs\CreateDefaultDomain.logThe aforementioned log file shows:
Default domain will be created:
C:\o\jdev11\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain
C:\o\jdev11\wlserver_10.3\common\bin\wlst.cmd "C:\o\jdev11\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee.adrs\CreateDefaultDomain.py"
Process started
wlst >
wlst > CLASSPATH=c:\o\jdev11\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;c:\o\jdev11\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;c:\o\jdev11\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Java\JDK16~1.0_1\lib\tools.jar;C:\o\jdev11\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\o\jdev11\WLSERV~1.3\server\lib\weblogic.jar;c:\o\jdev11\modules\features\weblogic.server.modules_10.3.0.0.jar;C:\o\jdev11\WLSERV~1.3\server\lib\webservices.jar;c:\o\jdev11\modules\ORGAPA~1.5/lib/ant-all.jar;c:\o\jdev11\modules\NETSFA~1.0_1/lib/ant-contrib.jar;
wlst >
wlst > PATH=c:\o\jdev11\patch_wls1030\profiles\default\native;c:\o\jdev11\patch_jdev1111\profiles\default\native;c:\o\jdev11\patch_cie660\profiles\default\native;C:\o\jdev11\WLSERV~1.3\server\native\win\32;C:\o\jdev11\WLSERV~1.3\server\bin;c:\o\jdev11\modules\ORGAPA~1.5\bin;C:\Java\JDK16~1.0_1\jre\bin;C:\Java\JDK16~1.0_1\bin;c:\o\db11\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Subversion\bin;c:\o\wfc\bin;c:\o\wfc\jre\1.4.2\bin\client;c:\o\wfc\jre\1.4.2\bin;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared\;c:\o\odp;c:\o\odp\bin;c:\java\apache-ant-1.7.1\bin;C:\Program Files\Plazmic CDK 4.6\bin;c:\o\db11\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Subversion\bin;c:\o\wfc\bin;c:\o\wfc\jre\1.4.2\bin\client;c:\o\wfc\jre\1.4.2\bin;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared\;c:\o\odp;c:\o\odp\bin;C:\o\jdev11\WLSERV~1.3\server\native\win\32\oci920_8
wlst >
wlst > Your environment has been set.
wlst >
wlst > CLASSPATH=c:\o\jdev11\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;c:\o\jdev11\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;c:\o\jdev11\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Java\JDK16~1.0_1\lib\tools.jar;C:\o\jdev11\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\o\jdev11\WLSERV~1.3\server\lib\weblogic.jar;c:\o\jdev11\modules\features\weblogic.server.modules_10.3.0.0.jar;C:\o\jdev11\WLSERV~1.3\server\lib\webservices.jar;c:\o\jdev11\modules\ORGAPA~1.5/lib/ant-all.jar;c:\o\jdev11\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;C:\o\jdev11\WLSERV~1.3\common\eval\pointbase\lib\pbembedded57.jar;C:\o\jdev11\WLSERV~1.3\common\eval\pointbase\lib\pbtools57.jar;C:\o\jdev11\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar
wlst >
wlst > Initializing WebLogic Scripting Tool (WLST) ...
wlst >
wlst > Jython scans all the jar files it can find at first startup. Depending on the system, this process may take a few minutes to complete, and WLST may not return a prompt right away.
wlst >
wlst > Welcome to WebLogic Server Administration Scripting Shell
wlst >
wlst > Type help() for help on available commands
wlst >
wlst > Creating Default Domain
wlst > Reading template: /C:/o/jdev11/wlserver_10.3/common/templates/domains/wls.jar
wlst > Setting Name to 'DefaultServer'
wlst > Setting ListenAddress to ''
wlst > Setting ListenPort to 7101
wlst > Setting domain password.
wlst > Failed to get environment, environ will be empty: (0, 'Failed to execute command ([\'sh\', \'-c\', \'env\']): java.io.IOException: Cannot run program "sh": CreateProcess error=2, The system cannot find the file specified')
wlst > Problem invoking WLST - Traceback (innermost last):
wlst >   File "C:\o\jdev11\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee.adrs\CreateDefaultDomain.py", line 50, in ?
wlst >   File "Lib/javaos.py", line 137, in __getitem__
wlst >   File "Lib/UserDict.py", line 14, in __getitem__
wlst > KeyError: DOMAIN_PASSWORD
wlst >
Elapsed time: 40920 msAs noted in the original post - it seems that the WebLogic scripting tool is assuming a Unix-type host.
Best,
John

Hi all,
(refer to [url http://forums.oracle.com/forums/thread.jspa?messageID=3168105]here for original post)
I'm posting this again with some more information. When downloading the Studio Edition (Base - no JDK) version of JDeveloper 11g update 1, an error occurs upon first (and each subsequent) startup of JDeveloper (error details below).
Tests that I have done:
1). Install using JDK 6 u 11 - JDK did not show up automatically in the installer, had to browse to find it and select it. Running using 6u11, 6u10, and 6u7 (deleting the system directory after each try) - error occurs.
2). Install using JDK 6 u7 - JDK was automatically found by the installer. Running using 6u7, 6u11, and 6u10 (deleting the system directory after each try) - error occurs
These errors do not occur when using the Windows installer. For information: my machine is Windows 2008 Server Standard 32-bit. An update - I just tried this on a Vista 64-bit laptop (running Sun 32-bit JDK 6u10) and did not have the problem. Ergo, this seems to be an issue with the JDK and detecting Windows 2008 as a Windows platform (or possibly with whatever mechanism JDev/WLS is using to detect the OS platform). I'll do more research on that and update if I find anything.
One more update: I didn't find any issues reported like this related to Windows 2008, but I did one more test: install and run JDeveloper using:
java version "1.6.0_05"
Java(TM) SE Runtime Environment (build 1.6.0_05-b13)
BEA JRockit(R) (build R27.6.0-50_o-100423-1.6.0_05-20080626-2105-windows-ia32, compiled mode)                                                                   The issue does not occur using this JDK. So to summarize, installing JDev 11g update 1 Studio edition, base installer using any of the SUN JDK's on Windows 2008 gives this problem. Using the windows installer or JRockit Mission Control JVM - no problems.
Finally, one last update - the error is related to the JVM that is used to install, not the one used to run JDeveloper (via editing jdev.conf) - the offending JDK is in wlserver_10.3\common\bin\commEnv.cmd. Seems like a no-no to have one JDK running JDev and another running the integrated WLS, though. Quite a pity, as JDev starts up pretty slowly using JRockit Mission Control.
JRockit Realtime seems to be a bit faster... sigh - now to remove the 72 extra JDK's on my laptop ;)
My going forward plan: use the Windows installer. Wish I never installed Windows Server 2008.
Now for the error details; the log shows:
ERROR: An error occurred while building the default domain.
Please see this log file for more details:
C:\o\jdev11\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee.adrs\CreateDefaultDomain.logThe aforementioned log file shows:
Default domain will be created:
C:\o\jdev11\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain
C:\o\jdev11\wlserver_10.3\common\bin\wlst.cmd "C:\o\jdev11\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee.adrs\CreateDefaultDomain.py"
Process started
wlst >
wlst > CLASSPATH=c:\o\jdev11\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;c:\o\jdev11\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;c:\o\jdev11\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Java\JDK16~1.0_1\lib\tools.jar;C:\o\jdev11\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\o\jdev11\WLSERV~1.3\server\lib\weblogic.jar;c:\o\jdev11\modules\features\weblogic.server.modules_10.3.0.0.jar;C:\o\jdev11\WLSERV~1.3\server\lib\webservices.jar;c:\o\jdev11\modules\ORGAPA~1.5/lib/ant-all.jar;c:\o\jdev11\modules\NETSFA~1.0_1/lib/ant-contrib.jar;
wlst >
wlst > PATH=c:\o\jdev11\patch_wls1030\profiles\default\native;c:\o\jdev11\patch_jdev1111\profiles\default\native;c:\o\jdev11\patch_cie660\profiles\default\native;C:\o\jdev11\WLSERV~1.3\server\native\win\32;C:\o\jdev11\WLSERV~1.3\server\bin;c:\o\jdev11\modules\ORGAPA~1.5\bin;C:\Java\JDK16~1.0_1\jre\bin;C:\Java\JDK16~1.0_1\bin;c:\o\db11\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Subversion\bin;c:\o\wfc\bin;c:\o\wfc\jre\1.4.2\bin\client;c:\o\wfc\jre\1.4.2\bin;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared\;c:\o\odp;c:\o\odp\bin;c:\java\apache-ant-1.7.1\bin;C:\Program Files\Plazmic CDK 4.6\bin;c:\o\db11\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Subversion\bin;c:\o\wfc\bin;c:\o\wfc\jre\1.4.2\bin\client;c:\o\wfc\jre\1.4.2\bin;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared\;c:\o\odp;c:\o\odp\bin;C:\o\jdev11\WLSERV~1.3\server\native\win\32\oci920_8
wlst >
wlst > Your environment has been set.
wlst >
wlst > CLASSPATH=c:\o\jdev11\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;c:\o\jdev11\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;c:\o\jdev11\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Java\JDK16~1.0_1\lib\tools.jar;C:\o\jdev11\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\o\jdev11\WLSERV~1.3\server\lib\weblogic.jar;c:\o\jdev11\modules\features\weblogic.server.modules_10.3.0.0.jar;C:\o\jdev11\WLSERV~1.3\server\lib\webservices.jar;c:\o\jdev11\modules\ORGAPA~1.5/lib/ant-all.jar;c:\o\jdev11\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;C:\o\jdev11\WLSERV~1.3\common\eval\pointbase\lib\pbembedded57.jar;C:\o\jdev11\WLSERV~1.3\common\eval\pointbase\lib\pbtools57.jar;C:\o\jdev11\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar
wlst >
wlst > Initializing WebLogic Scripting Tool (WLST) ...
wlst >
wlst > Jython scans all the jar files it can find at first startup. Depending on the system, this process may take a few minutes to complete, and WLST may not return a prompt right away.
wlst >
wlst > Welcome to WebLogic Server Administration Scripting Shell
wlst >
wlst > Type help() for help on available commands
wlst >
wlst > Creating Default Domain
wlst > Reading template: /C:/o/jdev11/wlserver_10.3/common/templates/domains/wls.jar
wlst > Setting Name to 'DefaultServer'
wlst > Setting ListenAddress to ''
wlst > Setting ListenPort to 7101
wlst > Setting domain password.
wlst > Failed to get environment, environ will be empty: (0, 'Failed to execute command ([\'sh\', \'-c\', \'env\']): java.io.IOException: Cannot run program "sh": CreateProcess error=2, The system cannot find the file specified')
wlst > Problem invoking WLST - Traceback (innermost last):
wlst >   File "C:\o\jdev11\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee.adrs\CreateDefaultDomain.py", line 50, in ?
wlst >   File "Lib/javaos.py", line 137, in __getitem__
wlst >   File "Lib/UserDict.py", line 14, in __getitem__
wlst > KeyError: DOMAIN_PASSWORD
wlst >
Elapsed time: 40920 msAs noted in the original post - it seems that the WebLogic scripting tool is assuming a Unix-type host.
Best,
John

ERROR: An error occurred while building the default domain

Hi,
I have just installed Oracle JDeveloper 11g R1 (Build 5407) (Oracle JDeveloper Studio Edition for Windows (934 MB) ) on my windows laptop, but when I start JDeveloper I get the message : ERROR: An error occurred while building the default domain.
Does anyone know what this means or how to resolve it?
Log file:
Process started
wlst >
wlst > CLASSPATH=C:\Oracle\MIDDLE~1\patch_wls1031\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\utils\config\10.3.1.0\config-launch.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.1.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.0/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;.;C:\Program Files\Java\jre1.6.0_03\lib\ext\QTJava.zip;C:\DevSuiteHome_2\jlib\repository.jar;C:\DevSuiteHome_2\jlib\ldapjclnt10.jar;C:\DevSuiteHome_2\jlib\debugger.jar;C:\DevSuiteHome_2\jlib\ewt3.jar;C:\DevSuiteHome_2\jlib\share.jar;C:\DevSuiteHome_2\jlib\utj.jar;C:\DevSuiteHome_2\jlib\zrclient.jar;C:\DevSuiteHome_2\reports\jlib\rwrun.jar;C:\DevSuiteHome_2\forms\java\frmwebutil.jar;C:\DevSuiteHome_2\forms\java\FormsProperties1.jar;C:\DevSuiteHome_2\forms\java\handleimage3.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jrf_11.1.1/jrf-api.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/jrf-wlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.odl_11.1.1/ojdl.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.odl_11.1.1/ojdl2.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.dconfig-infra_11.1.1.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.fabriccommon_11.1.1/fabric-common.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.xdk_11.1.0/xmlparserv2.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.xdk_11.1.0/xml.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.webservices_11.1.1/orawsdl.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.webservices_11.1.1/mdds.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/org.apache.commons.digester_1.7.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/../modules/javax.xml.bind_2.1.1.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/../modules/javax.activation_1.1.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/../modules/javax.xml.stream_1.1.1.0.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jps_11.1.1/jps-mbeans.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jps_11.1.1/jps-manifest.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/jps-wlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jps_11.1.1/jps-upgrade.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.http_client_11.1.1.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jmx_11.1.1/jmxframework.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jmx_11.1.1/jmxspi.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.dconfigbeans_11.1.1.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share.ca_11.1.1/adf-share-base.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share.ca_11.1.1/adf-share-ca.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share_11.1.1/adflogginghandler.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share_11.1.1/adfsharembean.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share_11.1.1/commons-el.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share_11.1.1/jsp-el-api.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share_11.1.1/oracle-el.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/sslconfigwlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/auditwlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/oamap_help.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/ossoiap_help.jar;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\lib\ADF-SH~1.JAR;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\lib\mdswlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\AUDITW~1.JAR;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\jps-wlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\jrf-wlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\OAMAP_~1.JAR;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\OAMAUT~1.JAR;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\ossoiap.jar;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\OSSOIA~1.JAR;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\SSLCON~1.JAR
wlst >
wlst > PATH=C:\Oracle\MIDDLE~1\patch_wls1031\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.0\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\DOCUME~1\RICHAR~1\LOCALS~1\Temp\sfx93.tmp\jre160_05\bin;C:\OraHome_2\jre\1.4.2\bin\client;C:\OraHome_2\jre\1.4.2\bin;C:\DevSuiteHome_2\jdk\jre\bin\classic;C:\DevSuiteHome_2\jdk\jre\bin;C:\DevSuiteHome_2\jdk\jre\bin\client;C:\DevSuiteHome_2\jlib;C:\DevSuiteHome_2\bin;C:\DevSuiteHome_2\jre\1.4.2\bin\client;C:\DevSuiteHome_2\jre\1.4.2\bin;C:\oraclexe\app\oracle\product\10.2.0\server\bin;C:\DevSuiteHome\jdk\jre\bin\classic;C:\DevSuiteHome\jdk\jre\bin;C:\DevSuiteHome\jlib;C:\DevSuiteHome\bin;C:\DevSuiteHome\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Starbase\StarGate SDK\Lib;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Java\jdk1.6.0_07\bin;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
wlst >
wlst > Your environment has been set.
wlst >
wlst > CLASSPATH=C:\Oracle\MIDDLE~1\patch_wls1031\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\utils\config\10.3.1.0\config-launch.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.1.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.0/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;.;C:\Program Files\Java\jre1.6.0_03\lib\ext\QTJava.zip;C:\DevSuiteHome_2\jlib\repository.jar;C:\DevSuiteHome_2\jlib\ldapjclnt10.jar;C:\DevSuiteHome_2\jlib\debugger.jar;C:\DevSuiteHome_2\jlib\ewt3.jar;C:\DevSuiteHome_2\jlib\share.jar;C:\DevSuiteHome_2\jlib\utj.jar;C:\DevSuiteHome_2\jlib\zrclient.jar;C:\DevSuiteHome_2\reports\jlib\rwrun.jar;C:\DevSuiteHome_2\forms\java\frmwebutil.jar;C:\DevSuiteHome_2\forms\java\FormsProperties1.jar;C:\DevSuiteHome_2\forms\java\handleimage3.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jrf_11.1.1/jrf-api.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/jrf-wlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.odl_11.1.1/ojdl.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.odl_11.1.1/ojdl2.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.dconfig-infra_11.1.1.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.fabriccommon_11.1.1/fabric-common.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.xdk_11.1.0/xmlparserv2.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.xdk_11.1.0/xml.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.webservices_11.1.1/orawsdl.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.webservices_11.1.1/mdds.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/org.apache.commons.digester_1.7.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/../modules/javax.xml.bind_2.1.1.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/../modules/javax.activation_1.1.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/../modules/javax.xml.stream_1.1.1.0.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jps_11.1.1/jps-mbeans.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jps_11.1.1/jps-manifest.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/jps-wlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jps_11.1.1/jps-upgrade.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.http_client_11.1.1.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jmx_11.1.1/jmxframework.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jmx_11.1.1/jmxspi.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.dconfigbeans_11.1.1.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share.ca_11.1.1/adf-share-base.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share.ca_11.1.1/adf-share-ca.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share_11.1.1/adflogginghandler.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share_11.1.1/adfsharembean.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share_11.1.1/commons-el.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share_11.1.1/jsp-el-api.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share_11.1.1/oracle-el.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/sslconfigwlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/auditwlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/oamap_help.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/ossoiap_help.jar;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\lib\ADF-SH~1.JAR;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\lib\mdswlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\AUDITW~1.JAR;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\jps-wlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\jrf-wlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\OAMAP_~1.JAR;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\OAMAUT~1.JAR;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\ossoiap.jar;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\OSSOIA~1.JAR;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\SSLCON~1.JAR;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbembedded57.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbtools57.jar
wlst >
wlst > Initializing WebLogic Scripting Tool (WLST) ...
wlst >
wlst > Welcome to WebLogic Server Administration Scripting Shell
wlst >
wlst > Type help() for help on available commands
wlst >
wlst > Extend Default Domain
wlst > Reading domain: /C:/Documents and Settings/richard anthony/Application Data/JDeveloper/system11.1.1.1.33.54.07/DefaultDomain/
wlst > Adding domain extension template: /C:/Oracle/Middleware/jdeveloper/common/templates/jdeveloper/adrs_template.jar
wlst > Adding domain extension template: /C:/Oracle/Middleware/jdeveloper/common/templates/applications/jrf_template_11.1.1.jar
wlst > Adding domain extension template: /C:/Oracle/Middleware/jdeveloper/common/templates/jdeveloper/adf.fine.logging_11.1.1.jar
wlst > Updating domain.
wlst > Error: updateDomain() failed. Do dumpStack() to see details.
wlst > Problem invoking WLST - Traceback (innermost last):
wlst > File "C:\Documents and Settings\richard anthony\Application Data\JDeveloper\system11.1.1.1.33.54.07\o.j2ee.adrs\ExtendDefaultDomain.py", line 43, in ?
wlst > File "C:\Documents and Settings\richard anthony\Local Settings\Temp\WLSTOfflineIni5366665589360917524.py", line 89, in updateDomain
wlst > File "<iostream>", line 154, in ?
wlst >
wlst > File "<iostream>", line 103, in updateLoggers
wlst >
wlst > SystemExit: Failed to update logging.xml: java.lang.NoSuchMethodError: oracle.core.ojdl.util.XMLUtil.escapeAttrChars(Ljava/lang/String;Ljava/lang/Appendable;)V
wlst >
wlst >
wlst >
wlst >      at com.bea.plateng.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:51)
wlst >
wlst >      at com.bea.plateng.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1490)
wlst >
wlst >      at com.bea.plateng.domain.script.jython.WLScriptContext.updateDomain(WLScriptContext.java:425)
wlst >
wlst >      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
wlst >
wlst >      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
wlst >
wlst >      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
wlst >
wlst >      at java.lang.reflect.Method.invoke(Method.java:597)
wlst >
wlst >
wlst > com.bea.plateng.domain.script.jython.WLSTException: com.bea.plateng.domain.script.jython.WLSTException: com.bea.plateng.domain.script.ScriptException: Traceback (innermost last):
wlst >
wlst > File "<iostream>", line 154, in ?
wlst >
wlst > File "<iostream>", line 103, in updateLoggers
wlst >
wlst > SystemExit: Failed to update logging.xml: java.lang.NoSuchMethodError: oracle.core.ojdl.util.XMLUtil.escapeAttrChars(Ljava/lang/String;Ljava/lang/Appendable;)V
wlst >
wlst >
wlst >
Elapsed time: 16359 ms

Hi,
This might be caused by a conflict with something already in your CLASSPATH. I would suggest the following:
1. Shut down JDeveloper if it is already running. Delete the default domain directory:
rd /s "C:\Documents and Settings\richard anthony\Application Data\JDeveloper\system11.1.1.1.33.54.07\DefaultDomain"
2. From a command prompt, clear your CLASSPATH:
set CLASSPATH=
3. Start JDeveloper using the same command prompt as step 2:
C:\Oracle\Middleware\jdeveloper\jdev\bin\jdev
If the problem was with the pre-existing CLASSPATH, the default domain should now build successfully.
-Nathan

HT1338 When trying to update getting (error surle error domain error-1100). It started yesterday, any help would be great. I have Mountain Lion 10.8.1 on a new macbook pro with retina display.

When trying to update getting (error surle error domain error-1100). It started yesterday, any help would be great. I have Mountain Lion 10.8.1 on a new macbook pro with retina display.

There are many people suffering from this problem right now (including me). It appears to be a server issue. Just wait and try checking for updates again tomorrow.
Some things I have heard indicate that this may be a regional problem, though what parts of the world are affected I don't know yet. A few people have been helped by deleting the following preference file (paste the path into the Go -> Go to Folder window in the Finder to locate it), though most have not:
~/Library/Preferences/com.apple.SoftwareUpdate.plist
Note that if you are trying to download iTunes 10.7, that can be found here:
http://support.apple.com/kb/DL1576
Also, note that there is no reason to be anxious to get it, as the only thing added in iTunes 10.7 is compatibility with iOS 6, which will not be available until the 19th, and the new iPhone, which will not be available until later as well. The new iTunes that was announced is iTunes 11, which is also not yet available.

Error finding a domain controller

Hi,
I have an error in finding a windows domain controller when a PC bootup and does a network access via a Cisco wireless PCMCIA card (AIR PCM-352) managed by Cisco ACU.
This is the situation:
- the operating system of the PC is Windows XP sp2
- the wireless card is an AIR PCM352 with firmware V.5.60.21
- the version of ACU is 6.6.00
- the Access point is a Cisco 1120 (802.11b) with IOS version 12.3(8)JA
- wireless communication is completely open (ssid in guest mode, authentication open ,no wep)
- the ip address of the PC is obtained via DHCP (DHCP server is a Microsoft Server)
I notice a difference between a Cisco PCMCIA card 352 managed by Cisco ACU and by Windows XP.
In fact this error doesn't happen when the WLAN card is controlled by Windows wireless utility.
Is it possible that the startup timing of the Cisco ACU is later than the Window's one?
Does anyone resolved this error?
Thanks in advance
Antonio

Hi Antonio,
Obviously you get the error of the domain not found because your wireless card is not even associated (the wireless card utility hasnt started)
Can you clarify the line "Is it possible that the startup timing of the Cisco ACU is later than the Window's one? " . You mean start the Cisco ACU before the windows one right?
The best way to get around issues like that is to use for example the Odyssey client from Funk and turn on GINA and it should work fine.
Rgds,
Pablo

Seeing ORABPEL-12164 error message in domain.log file.

Hi,
Can someone help me in debugging the ORABPEL-12164 error seen in domain.log
<2007-06-15 11:40:36,521> <INFO> <NTAPDEV.collaxa.cube.ws> <AdapterFramework::Outbound> file:/E:/OraHome_1/integration/orabpel/domains/NTAPDEV/tmp/.bpel_NAPP_PO_PUBLISHER_1.0.jar/publish3A6BAM.wsdl [ Produce_Message_ptt::Produce_Message(STATE_MSG) ] - Using JCA Connection Pool - max size = <unbounded>
<2007-06-15 11:40:36,521> <INFO> <NTAPDEV.collaxa.cube.ws> <AdapterFramework::Outbound> file:/E:/OraHome_1/integration/orabpel/domains/NTAPDEV/tmp/.bpel_NAPP_INVOICE_1.0.jar/publishStatusToOracleBAM.wsdl [ Produce_Message_ptt::Produce_Message(STATE_MSG) ] - Using JCA Connection Pool - max size = <unbounded>
<2007-06-15 11:40:36,568> <ERROR> <NTAPDEV.collaxa.cube.ws> <AdapterFramework::Outbound> file:/E:/OraHome_1/integration/orabpel/domains/NTAPDEV/tmp/.bpel_NAPP_PO_PUBLISHER_1.0.jar/publish3A6BAM.wsdl [ Produce_Message_ptt::Produce_Message(STATE_MSG) ] - Could not invoke operation 'Produce_Message' against the 'JMSAdapter' due to:
ORABPEL-12164
ERRJMS_MSGPROD_CONSTR_ERR.
Unable to construct MessageProducer.
Please examine the log file to determine the problem.
<2007-06-15 11:40:36,568> <INFO> <NTAPDEV.collaxa.cube.ws> <AdapterFramework::Outbound> Change logging level for Logger 'NTAPDEV.collaxa.cube.ws' to DEBUG to see full error stack
<2007-06-15 11:40:36,568> <ERROR> <NTAPDEV.collaxa.cube.ws> <AdapterFramework::Outbound> file:/E:/OraHome_1/integration/orabpel/domains/NTAPDEV/tmp/.bpel_NAPP_PO_PUBLISHER_1.0.jar/publish3A6BAM.wsdl [ Produce_Message_ptt::Produce_Message(STATE_MSG) ] - Rolling back JCA LocalTransaction
Thanks, G

I recently took over this system, I believe all the configuration you mentioned should have been done.
Any pointers in verifying is highly appreciated.
Thanks, G

Error in client: domain was null

I'm getting the following exception now that I've deployed one of the applications on another OC4J instance on a separate machine. I can connect fine and get the expected response when running out of my Intellij IDE or command line. Problem is I get the message I pasted below now when trying to connect after deploying on my second OC4J instance. I used port 3102 and then switched over to the default 23791 thinking this may resolve the problem but I still got the same error message. Anyone know what could be causing this and why I can connect fine at command line but not once deployed in OC4J?
Error in client: domain was null
java.lang.NullPointerException: domain was null
     at com.evermind.server.rmi.RMIServer.addNode(RMIServer.java:735)
     at com.evermind.server.rmi.RMIServer.getConnection(RMIServer.java:804)
     at com.evermind.server.rmi.RMIInitialContextFactory.getInitialContext(RMIInitialContextFactory.java:206)
     at com.evermind.server.ApplicationClientInitialContextFactory.getInitialContext(ApplicationClientInitialContextFactory.java:167)
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:660)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:241)
     at javax.naming.InitialContext.init(InitialContext.java:217)
     at javax.naming.InitialContext.<init>(InitialContext.java:193)
     at gov.va.med.pats.client.RemoteClient.sendMessage(RemoteClient.java:47)
     at gov.va.med.pats.adapter.TechAdapter$QueueThreader.run(TechAdapter.java:101)

I'm getting the following exception now that I've deployed one of the applications on another OC4J instance on a separate machine. I can connect fine and get the expected response when running out of my Intellij IDE or command line. Problem is I get the message I pasted below now when trying to connect after deploying on my second OC4J instance. I used port 3102 and then switched over to the default 23791 thinking this may resolve the problem but I still got the same error message. Anyone know what could be causing this and why I can connect fine at command line but not once deployed in OC4J?
Error in client: domain was null
java.lang.NullPointerException: domain was null
     at com.evermind.server.rmi.RMIServer.addNode(RMIServer.java:735)
     at com.evermind.server.rmi.RMIServer.getConnection(RMIServer.java:804)
     at com.evermind.server.rmi.RMIInitialContextFactory.getInitialContext(RMIInitialContextFactory.java:206)
     at com.evermind.server.ApplicationClientInitialContextFactory.getInitialContext(ApplicationClientInitialContextFactory.java:167)
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:660)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:241)
     at javax.naming.InitialContext.init(InitialContext.java:217)
     at javax.naming.InitialContext.<init>(InitialContext.java:193)
     at gov.va.med.pats.client.RemoteClient.sendMessage(RemoteClient.java:47)
     at gov.va.med.pats.adapter.TechAdapter$QueueThreader.run(TechAdapter.java:101)

C170 Ironport error "The query domain.name.accept failed

Dear Community,
I have two Cisco C170 Ironport devices. Each is throwing the following error:
"The query <domain.name.accept> failed with result inquiry timed out."
I have been unable to decipher it and was hoping anyone might possibly have a clue to look for the resolution.
I would be very grateful Community.
Thanks.
Rocky

Hey Rocky,
This seems to be an error on an LDAP accept query that is configured on the appliance.
If you have indeed created an LDAP accept query, please check connectivity from the appliance to your AD servers currently set.
Please go to GUI > System Admin > LDAP
Here you can check connectivity to the AD servers and also run a test accept query.
Please attempt these tests and let us know the results.
Judging from the error, I am assuming that the LDAP accept query test will fail resulting in a time out, if it does this usually indicates either the AD server was not properly setup on the appliance, if so, you will need to ensure that your firewalls if any are in place is allowing the query traffic from the appliance to the AD server
Please let us know.
Regards,
Matthew

Workspace Error: AUTHEN_CSSLLoginFailed:2:25:1005 Authentication failed

All of a sudden, we find that users configured in MSAD cannot access workspace, planning or any other component. when they try to do that, the error they get is:
"You must supply a valid username & password to log onto the system"
In Hyperion/logs/workspace, stdout_log, I get the error:
"AUTHEN_CSSLLoginFailed:2:25:1005 Authentication failed for user xyz. Invalid credentials"
Native directory user is able to login fine.
Has anybody every encountered this error before?

If it is an AD configuration issue you should be able to easily validate the configuration in Shared Services, if that checks out then test searching for the problem users/groups in Shared Services, plus check out the Shared services logs - SharedServices_Security.log, SharedServices_SecurityClient.log
Cheers
John
http://john-goodwin.blogspot.com/

4321 NetBT errors :1b after domain controller becomes pdc

I am getting 4321 NetBT errors :1b after domain controller becomes pdc errors after moving fsmo roles over to new pdc. The error is the DOMAIN :1b could not be regitstered with the IP of the new DC. The computer with the IP would not allow
it to be claimed. I can;t ping the computer that would not allow it to be claimed and I dont see WINs on out network. This is a HYPER-V domain controller.
Is this gonig to effect network clients?

Hi,
Glad to hear that it has been solved! Thank you very much for your sharing.
Please feel free to let us know if there are any issues in the future.
Best Regards,
Amy Wang

Error NSURLE-error domain 1005

Similar Messages

Maybe you are looking for