Error, Nu00BA mensaje: 00119..- ?

U1     &CAUSE&
AS     You cannot print the title on a tab index as the tab index does not
       support this.
U1     &SYSTEM_RESPONSE&
AS                                                                            
U1     &WHAT_TO_DO&
AS     Check the screen modifications or the Screen Painter definitions of the
       tab title.
AS     When you modify the screen, do not set the INPUT attribute of the tab
       title to '0'.
I dont fully understood, because, the TAB cannot have the INPUT properti, right?.
What can i do?. 
anyway, i cant change the  status of the TAB.
Trinity!! Help!!

Thanks, the answer was in the forum, and work fine. =)
Cesar Hinojosa  
Posts: 4
Questions: 2
Registered: 2/20/06
Forum points: 0 
I found a bunch of OSS notes on this message. SAP had the same issue on some of the standard ITs (i.e 0045, 0854, 0442).
The fix was to change the modification group 1 to "01F" on wach one of the tabs.
Cesar

Similar Messages

  • Error nu00BA BF00020. Iban Code

    HI.
    I am trying to create a new bank but I dont now how to field the iban code, it gives me the error BF00020
    Thanks

    Dear Nereab,
    please be kindly informed that:
    the IBANs are stored in the application table TIBAN. If you transport
    House Banks, no IBANs will be transported. You have to maintain the
    entries in the target system again or you can transport them
    separately (transport entries of table TIBAN).
    The table TIBAN is defined as transportable. If you want to transport
    this table, you have to call the transaction SM30, enter the table
    V_TIBAN and press 'Transport'. In this way you will create a transport
    request which can be imported to other systems. Please read SAP
    note 497630.
    I hope this helps You.
    Mauri

  • Error number  mensaje: FE721  Tcode KDH2

    Hi:
    I'm trying to modify the structure of the income Income Statement with the Tcode KDH2,
    the structure has an additional part called Annex.
    The Annex is within the income statement.
    The annex is divided by functional area of the company.
    While the income is divided by cost center
    I need some accounts are only in a functional area in the Annex and the share of other areas funionales account appears in the overall result.
    When I try to create these accounts in the income statement with the transaction gives me the error KDH2 FE721
    I can do?

    Hello!
    G/L account with signs Debit and Credit could be assigned to the item of the financial statement only once. Otherwise, the system issues error FE721. This error is hard-coded.
    Regards,
    Mateus Grings

  • Listener error while restoring to new host

    I'm trying to restore a production database to a new host using a complete RMAN backup following these instructions:
    http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmrecov.htm#i1006453
    I'm trying to force the database to start in NOMOUNT so I can restore the control files, then the data files. I took a crack at editing the initialization file, but I'm not sure I got things right, as I'm trying to restore a single-node RAC to a non-RAC system. Both servers are Windows.
    I'm getting the following error:
    RMAN> startup force nomount pfile='D:\Oracle\product\10.2.0\TSBAK\database\initt
    sbak.ora';
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of startup command at 04/21/2010 14:01:19
    RMAN-04014: startup failed: ORA-01078: failure in processing system parameters
    RMAN-04017: startup error description: ORA-00119: invalid specification for syst
    em parameter LOCAL_LISTENER
    ORA-00132: syntax error or unresolved network name 'LISTENER_TSBAK'This is the listener (I just ran the net configuration wizard)
    # listener.ora Network Configuration File: D:\oracle\product\10.2.0\TSBAK\network\admin\listener.ora
    # Generated by Oracle configuration tools.
    SID_LIST_LISTENER_TSBAK =
      (SID_LIST =
        (SID_DESC =
          (SID_NAME = PLSExtProc)
          (ORACLE_HOME = D:\oracle\product\10.2.0\TSBAK)
          (PROGRAM = extproc)
    LISTENER_TSBAK =
      (DESCRIPTION_LIST =
        (DESCRIPTION =
          (ADDRESS = (PROTOCOL = TCP)(HOST = TSSQL2008B)(PORT = 1521))
          (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
      )This is the init.ora file
    *.__db_cache_size=343932928
    *.__java_pool_size=209715200
    *.__large_pool_size=8388608
    *.__shared_pool_size=209715200
    *.__streams_pool_size=8388608
    *._optimizer_connect_by_cost_based=false
    *.audit_file_dest='D:\Oracle\product\10.2.0\admin\TSBAK\ADUMP'
    *.background_dump_dest='D:\Oracle\product\10.2.0\admin\TSBAK\BDUMP'
    *.cluster_database=FALSE
    *.cluster_database_instances=1
    *.compatible='10.2.0.1.0'
    *.control_files='+DATA/tsbak/controlfile/current.260.591973329'
    *.core_dump_dest='D:\Oracle\product\10.2.0\admin\TSBAK\CDUMP'
    *.db_block_size=8192
    *.db_create_file_dest='+DATA'
    *.db_file_multiblock_read_count=16
    *.db_files=1024# INITIAL
    *.db_name='TS'
    *.global_names=FALSE
    ##clustdb1.instance_name='TS1'
    *.instance_number=1
    ##clustdb1.instance_number=1
    *.java_pool_size=209715200
    *.job_queue_processes=10
    *.large_pool_size=8388608
    ##clustdb1.local_listener='LISTENER_TSBAK'
    *.local_listener='LISTENER_TSBAK'
    *.log_archive_dest_1='LOCATION=+DATA/TSBAK/'
    *.log_archive_format='ARC%S_%R.%T'
    *.log_buffer=8192# INITIAL
    *.log_checkpoint_interval=10000
    *.max_dump_file_size='10240'# limit trace file size to 10 K each
    *.nls_timestamp_format='YYYY-MM-DD HH24:MI.SS.FF'
    *.open_cursors=300
    *.open_links=4
    *.parallel_max_servers=5
    *.pga_aggregate_target=203423744
    *.processes=250# INITIAL
    *.remote_listener='LISTENER_TSBAK'
    *.remote_login_passwordfile='EXCLUSIVE'
    ##clustdb1.remote_login_passwordfile='exclusive'
    *.sga_max_size=1317011456
    *.sga_target=788529152
    *.shared_pool_size=209715200
    *.smtp_out_server='mail.mt.net:25'
    *.thread=1
    ##clustdb1.thread=1
    *.undo_management='AUTO'# For automatic undo management
    *.undo_tablespace='UNDOTBS1'
    ##clustdb1.undo_tablespace='UNDOTBS1'
    *.user_dump_dest='D:\Oracle\product\10.2.0\admin\TSBAK\UDUMP'I am not sure which piece has the error, but would appreciate some help. This is one of the few steps that there isn't much mention of in the guide.

    okay moving on. I got previous error corrected (the directories hadn't been created yet). Now, I'm facing a new one and I did a copy/paste of the directory string, so I know it's valid.
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of startup command at 04/22/2010 12:13:34
    RMAN-04014: startup failed: ORA-16024: parameter LOG_ARCHIVE_DEST_1 cannot be parsedthe parameter is:
    *.log_archive_dest_1='D:\Oracle\product\10.2.0\TSBAK\database\archive'Can someone see what I'm doing wrong here?

  • HELP!!, MySQL JDBC ERROR!!, Please Help!!

    I'm excecuting this JSP code, to connect to a MySQL Database on the same server as my JSP containter, but i keep getting this error when it excecutes the ResultSet's getString() method. I Can't find the mistake anywhere so if anybody can help me i would really apreciate it!!!
    TANX!!! :)
    Here's the message i get:
    ERROR CODE:0 , SQLSTATUS:S1000, MESSAGE: "before start of result set ".
    Here's the code i'm excecuting:
    String nombreBDD = "tesis";
    String nombreServidor = "localhost";
    int portnumber = 3306;
    String username = "root";
    String password = "backhoff";
    int flag = 0; //Bandera para no tener dos etiquetas XML raiz
    String no_telefono = null;
    Connection conn = null;
    Statement stmt = null; 
    ResultSet rs = null;
    MysqlDataSource mysql = new MysqlDataSource();
    mysql.setDatabaseName(nombreBDD);          
    mysql.setServerName(nombreServidor);           
    mysql.setPortNumber(portnumber);     
    try
    conn = mysql.getConnection(username, password);
    }catch(SQLException e)
    String sqlState = e.getSQLState();          
    Integer i = new Integer(e.getErrorCode());
    String errorCode = i.toString();
    String message = e.getMessage();
    flag = 1;          
    out.println("Error:" + errorCode + "  Mensaje: " + message + "  Estado SQL:" + sqlState);
    e = null;
    try
    stmt = conn.createStatement();
    }catch(SQLException e)
    String sqlState = e.getSQLState();          
    Integer i = new Integer(e.getErrorCode());
    String errorCode = i.toString();
    String message = e.getMessage();
    out.println("Error:" + errorCode + "  Mensaje: " + message + "  Estado SQL:" + sqlState);
    e = null;
    try
    rs = stmt.executeQuery("SELECT * FROM alumnos");
    }catch(SQLException e)
    String sqlState = e.getSQLState();          
    Integer i = new Integer(e.getErrorCode());
    String errorCode = i.toString();
    String message = e.getMessage();
    out.println("Error:" + errorCode + "  Mensaje: " + message + "  Estado SQL:" + sqlState);
    e = null;
    try
    no_telefono = rs.getString(1); // Here's where i get the error !!!!!
    }catch(SQLException e)
    String sqlState = e.getSQLState();          
    Integer i = new Integer(e.getErrorCode());
    String errorCode = i.toString();
    String message = e.getMessage();
    out.println("Error:" + errorCode + "  Mensaje: " + message + "  Estado SQL:" + sqlState);
    e = null;
    }

    You have to loop over your result set with something like
    while(rs.next()){
    String str = rs.getString(1);
    /*add str to a data structure, such as an ArrayList if your query returns more then a record
    }Luigi

  • Error Install In Windos Vista SAP BO

    I have SAP BO release 10, when I`m upgrade to Realese 23
    The server Ok, PC with Windows XP OK, but when I`m run the upgradre in Windows Vista
    send me yhe next message error
    Internal error (-1101) mensaje 131-183
    Please help me
    Regards

    HI,
    firstly, would request you to upgrade your IDT i.e client tools as well as CR4E tools to the Server version i.e BI 4.0 sP5 it seems.
    then test the issue again and update
    Regards,
    Atul B

  • Can be open a pdf without abrir it?

    HELLO!!
        My consultation is the following one: I have passed a Smartforms to pdf and no problemu2026 The question is the siguente abrir the pdf I have to keep it in a directoryu2026 The pdf without keeping it in a directory can be open.
    Program:
    ORM smartforms_to_pdf.
    *-- Declaraciones
    DATA: w_ctrlop TYPE ssfctrlop,
    w_compop TYPE ssfcompop,
    w_return TYPE ssfcrescl,
    otfdata LIKE itcoo OCCURS 0 WITH HEADER LINE,
    lc_name TYPE rs38l_fnam,
    intab TYPE soli_tab,
    objbin TYPE solix_tab,
    wa_intab TYPE LINE OF soli_tab,
    wa_objbin TYPE LINE OF solix_tab,
    objpack LIKE sopcklsti1, "WITH HEADER LINE.
    l_nom_pdf(70) TYPE c,
    l_ruta TYPE string.
    *-- Función que devuelve el módulo de función del SmartForm
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
    formname = 'ZIOS_CONTRATOS_CESION'
    IMPORTING
    fm_name = lc_name
    EXCEPTIONS
    no_form = 1
    no_function_module = 2
    OTHERS = 3.
    *-- Si hubo errores, desplegar mensaje y terminar, si se continua se
    *-- produce un error de run time.
    IF sy-subrc <> 0.
    MESSAGE ID sy-msgid
    TYPE sy-msgty
    NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    w_ctrlop-getotf = 'X'.
    w_ctrlop-no_dialog = 'X'.
    w_compop-tdnoprev = 'X'.
    *-- Enviar datos al formulario e imprimirlo.
    CALL FUNCTION lc_name
    EXPORTING
    output_options = w_compop
    control_parameters = w_ctrlop
    izios_t_contratos = wzios_t_contratos
    IMPORTING
    job_output_info = w_return
    EXCEPTIONS
    formatting_error = 1
    internal_error = 2
    send_error = 3
    user_canceled = 4
    OTHERS = 5.
    *-- Si se produce un error, reportarlo.
    IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ELSE.
    otfdata[] = w_return-otfdata[].
    ENDIF.
    *-- En la tabla otfdata nos queda guardado el formulario en formtao OTF
    *-- Ahora sólo resta convertir el OTF en PDF
    LOOP AT otfdata.
    wa_intab = otfdata.
    APPEND wa_intab TO intab.
    CLEAR wa_intab.
    ENDLOOP.
    *-- Convertir el OTF en PDF
    CALL FUNCTION 'SX_OBJECT_CONVERT_OTF_PDF'
    EXPORTING
    format_src = 'OTF'
    format_dst = 'PDF'
    ADDR_TYPE =
    devtype = 'LP01'
    FUNCPARA =
    CHANGING
    transfer_bin = objpack-transf_bin
    content_txt = intab
    content_bin = objbin
    objhead = intab
    len = objpack-doc_size
    EXCEPTIONS
    err_conv_failed = 1
    OTHERS = 2.
    *-- En la tabla objbin queda guardado el PDF para salvarlo
    *-- en la PC con la función 'GUI_DOWNLOAD' o bien enviarlo por mail con
    *-- la función 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    SHIFT p_kunnr LEFT DELETING LEADING '0'.
    CLEAR l_nom_pdf.
    CONCATENATE g_contrato '_' 'Clte.' p_kunnr '_' sy-datum4(2) '.' sy-datum2(2) '.' sy-datum+(4)
    '_' sy-uzeit(2) '.' sy-uzeit2(2) '.' sy-uzeit4(2) '.' 'PDF' INTO l_nom_pdf.
    CLEAR l_ruta.
    CONCATENATE 'C:/temp/' l_nom_pdf INTO l_ruta.
    CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
    filename = 'C:/temp/filename.PDF'
    filename = l_ruta
    filetype = 'BIN'
    TABLES
    data_tab = objbin.
    *-- Con esta función se abre el PDF
    CALL FUNCTION 'WS_EXECUTE'
    EXPORTING
    commandline = 'C:/temp/filename.PDF'
    commandline = l_ruta
    program = 'AcroRd32.exe'.
    ENDFORM. " smartforms_to_pdf
    Thanks!!

    I think Downloader in PSE organizer has capabilty to extract images from PDF.
    Collin- Is there any other way in PSE to extract images from PDF. Pls tell us how hat can be done.

  • JSF, tiles, xml and xsl

    Good days people, I am employed at an app that wants to integrate JSF, tiles, xml and xsl.
    Basically the app receives information of the user's interfaz, builds an url with the above mentioned information and invokes to a service web that a xml returns with the information. The idea is to generate the exit in format html or wml with an insole(staff) xsl and to send the result in this format to every jsp that is going to form a part of the page that it will generate tiles. at first I understand that it is feasible, i�d like to know if someone already has done it and since it has done it.
    Just now what I have is a managed bean that receives the parameters of the altar frontal and invokes a method of a service, like this:
    public String encuentra(){
    //deja los atributos privados rellenos.
    String mensaje ;
    crearYRellenarBusquedaVO();
    try {
    setResultado(this.getServicio().obtenerResultadosWML(this.getBusquedaVO()));
    mensaje="succesNoJS";
    }catch(java.lang.IllegalArgumentException e){
    mensaje="error";
    }catch(es.yell.frontlite.exceptions.SrvBusquedaNoxtrumServiceException e1){
    mensaje="error";
    }catch(Exception e2){
    mensaje="error";
    return mensaje;
    public String obtenerResultadosWML(es.yell.frontlite.service.impl.BusquedaVO busquedaVO){
    if (busquedaVO == null){
    throw new IllegalArgumentException(
    "obtenerResultadosJSdesactivado(es.yell.frontlite.service.impl.BusquedaVO busquedaVO) - 'busquedaVO' no puede ser nulo.");
    try{
    return this.manejarObtenerResultadosWML(busquedaVO);
    }catch(es.yell.frontlite.exceptions.SrvBusquedaNoxtrumServiceException e1){
    throw new es.yell.frontlite.exceptions.SrvBusquedaNoxtrumServiceException(
    "Error ejecutando el servicio String obtenerResultadosJSdesactivado(es.yell.frontlite.service.impl.BusquedaVO busquedaVO). " + e1.getCause(),e1);
    }catch(Exception e){
    throw new es.yell.frontlite.exceptions.SrvBusquedaNoxtrumServiceException(
    "Error ejecutando el servicio String obtenerResultadosJSdesactivado(es.yell.frontlite.service.impl.BusquedaVO busquedaVO). " + e.getCause(),e);
    //it returns html code!
    protected String manejarObtenerResultadosWML(es.yell.frontlite.service.impl.BusquedaVO busquedaVO)
    throws java.lang.Exception{
    try{
    // xmlOrigen has full xml response from server
    String xmlOrigen = manejarObtenerResultadosJSActivado(busquedaVO);
    Source xmlSource = new StreamSource(new StringBufferInputStream(xmlOrigen));
    Source xsltSource = new StreamSource(SrvBusquedaNoxtrumServiceImpl.class.getResourceAsStream(Constantes.XSL_FILE));
    StringWriter cadenaSalida = new StringWriter();
    Result bufferResultado = new StreamResult(cadenaSalida);
    TransformerFactory factoriaTrans = TransformerFactory.newInstance();
    Transformer transformador = factoriaTrans.newTransformer(xsltSource);
    transformador.transform(xmlSource, bufferResultado);
    System.out.println(cadenaSalida.toString());
    return cadenaSalida.toString();
    }catch(Exception e2){
    throw new es.yell.frontlite.exceptions.SrvBusquedaNoxtrumServiceException (e2.getMessage());
    With this exit in html, since(as,like) how could i forward it towards a jsp especially?
    faces-config.xml
    <navigation-rule>
    <from-view-id>/index.jsp</from-view-id>
    <navigation-case>
    <from-outcome>succesNoJS</from-outcome>
    <to-view-id>/jsDesactivado.jsp</to-view-id>
    </navigation-case>
    <navigation-case>
    <from-outcome>error</from-outcome>
    <to-view-id>/error.jsp</to-view-id>
    </navigation-case>
    </navigation-rule>
    index.jsp
    <%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
    <%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
    <html>
    <f:view>
    <f:loadBundle basename="MessageResources" var="msg"/>
    <head>
    <title>
    ${msg.titulo}
    </title>
    </head>
    <body>
    <h:form id="formulario">
    Que:
    <h:inputText id="campoQue" value="#{yellProxy.campoQue}" />
    Donde
    <h:inputText id="campoDonde" value="#{ yellProxy.campoDonde}" />
    <h:commandButton id="boton" value="Encuentra" action="#{yellProxy.encuentra}"/>
    </h:form>
    </f:view>
    </body>
    </html>
    jsDesactivado.jsp
    <%@page contentType="text/html"%>
    <%@page pageEncoding="UTF-8"%>
    <%--
    The taglib directive below imports the JSTL library. If you uncomment it,
    you must also add the JSTL library to the project. The Add Library... action
    on Libraries node in Projects view can be used to add the JSTL 1.1 library.
    --%>
    <%--
    <%@taglib uri=" http://java.sun.com/jsp/jstl/core" prefix="c"%>
    --%>
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
    " http://www.w3.org/TR/html4/loose.dtd">
    <html>
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
    <title>JSP Page</title>
    </head>
    <body>
    <h1>JSP Page</h1>
    jsDesactivado!!
    <%--
    This example uses JSTL, uncomment the taglib directive above.
    To test, display the page like this: index.jsp?sayHello=true&name=Murphy
    --%>
    <%--
    <c:if test="${param.sayHello}">
    <!-- Let's welcome the user ${param.name} -->
    Hello ${param.name}!
    </c:if>
    --%>
    <jsp:getProperty name="yellProxy" property="resultado"/>
    </body>
    </html>
    If you could pass me a simple example of use of an app that uses JSF, tiles, xml and xsl, i�be grateful
    regards a lot!

    We too (at Viking Freight) would also be very interested to see if anybody
    has produced such a useful series of classes...
    Frank Lees, Developer
    -----Original Message-----
    From: Amin, Kamran [mailto:kamran.aminframeworkinc.com]
    Sent: Wednesday, January 19, 2000 12:11 PM
    To: 'Forte User'
    Subject: (forte-users) XML and XSL in Forte
    Has anybody integrated an XSL parser with Forte. I know Forte provides us
    with an XML parser but that does not help with parsing XSL. There a lot of
    parsers written in JAVA but that will not integrate well with Forte. We
    need something that will be easy to integrate with Forte. This parser will
    take our XML and XSL to give us a result set. If anybody can comment on the
    subject or share some information I would appreciate it.
    thanks in advance.
    ka
    For the archives, go to: http://lists.sageit.com/forte-users and use
    the login: forte and the password: archive. To unsubscribe, send in a new
    email the word: 'Unsubscribe' to: forte-users-requestlists.sageit.com

  • Problems with Interaction Tab in BPEL Console

    Hello.
    We have just installed Oracle SOA Suite 10.1.3.1.0 and applied Patch 10.1.3.3.0.
    The problem is as follows:
    When we are debugging an BPEL Process instance, and try to see the interactions, the following error appears:
    Mensaje de Excepción:
    [javax.servlet.ServletException] Cannot find work items. An attempt to fetch the work items using the where condition "cikey = ? and ( node_id like 'BpInv%' or node_id like 'BpRcv%' or node_id like 'BpOMs%')" from the datastore has failed. The exception reported is: Invalid column name Please check that the machine hosting the datasource is physically connected to the network. Otherwise, check that the datasource connection parameters (user/password) is currently valid. sql statement: SELECT * FROM admin_list_wi WHERE ci_domain_ref = 0 AND cikey = ? and ( node_id like 'BpInv%' or node_id like 'BpRcv%' or node_id like 'BpOMs%') ORDER BY wi_creation_date

    I guess you installed the 10.1.3.3 patch for bpel?
    Did you missed the post installation steps. Inhere you need to execute a sql-script. If im not wrong, the objects in this script have some relation with your errormessage.

  • Database installation gets fail in RAC

    Hello All,
    I'm configuring Oracle 11gR2 RAC2 node server over RHEL5.5 on Oracle VM box.
    I configured Clusterware but when I'm installing Oracle Database using DBCA utility it throws the following error as
    "ORA-00119: invalid specification for system parameter REMOTE_LISTENER
    ORA-00132: syntax error or unresolved network name 'rac-scan.xxx.com:1521"
    Few months back, I had configured 11gR2 RAC2 node server without having any error, but this time I wanted to configure the same on different machine then I'm getting the above mentioned error.
    Following are the cluster services for your references.
    [root@rac1 bin]# ./crsctl check cluster -all
    rac1:
    CRS-4537: Cluster Ready Services is online
    CRS-4529: Cluster Synchronization Services is online
    CRS-4533: Event Manager is online
    rac2:
    CRS-4537: Cluster Ready Services is online
    CRS-4529: Cluster Synchronization Services is online
    CRS-4533: Event Manager is online
    [root@rac1 bin]# ./crsctl stat res -t
    NAME TARGET STATE SERVER STATE_DETAILS
    Local Resources
    ora.DATA.dg
    ONLINE ONLINE rac1
    ONLINE ONLINE rac2
    ora.LISTENER.lsnr
    ONLINE ONLINE rac1
    ONLINE ONLINE rac2
    ora.asm
    ONLINE ONLINE rac1 Started
    ONLINE ONLINE rac2 Started
    ora.gsd
    OFFLINE OFFLINE rac1
    OFFLINE OFFLINE rac2
    ora.net1.network
    ONLINE ONLINE rac1
    ONLINE ONLINE rac2
    ora.ons
    ONLINE ONLINE rac1
    ONLINE ONLINE rac2
    ora.registry.acfs
    ONLINE ONLINE rac1
    ONLINE ONLINE rac2
    Cluster Resources
    ora.LISTENER_SCAN1.lsnr
    1 ONLINE ONLINE rac1
    ora.cvu
    1 ONLINE ONLINE rac2
    ora.oc4j
    1 ONLINE ONLINE rac2
    ora.rac1.vip
    1 ONLINE ONLINE rac1
    ora.rac2.vip
    1 ONLINE ONLINE rac2
    ora.scan1.vip
    1 ONLINE ONLINE rac1
    [root@rac2 bin]# ./crsctl stat res -t -init
    NAME TARGET STATE SERVER STATE_DETAILS
    Cluster Resources
    ora.asm
    1 ONLINE ONLINE rac2 Started
    ora.cluster_interconnect.haip
    1 ONLINE ONLINE rac2
    ora.crf
    1 ONLINE OFFLINE
    ora.crsd
    1 ONLINE ONLINE rac2
    ora.cssd
    1 ONLINE ONLINE rac2
    ora.cssdmonitor
    1 ONLINE ONLINE rac2
    ora.ctssd
    1 ONLINE ONLINE rac2 ACTIVE:0
    ora.diskmon
    1 OFFLINE OFFLINE
    ora.drivers.acfs
    1 ONLINE ONLINE rac2
    ora.evmd
    1 ONLINE ONLINE rac2
    ora.gipcd
    1 ONLINE ONLINE rac2
    ora.gpnpd
    1 ONLINE ONLINE rac2
    ora.mdnsd
    1 ONLINE ONLINE rac2
    [root@rac2 bin]# ./crsctl stat res -t
    NAME TARGET STATE SERVER STATE_DETAILS
    Local Resources
    ora.DATA.dg
    ONLINE ONLINE rac1
    ONLINE ONLINE rac2
    ora.LISTENER.lsnr
    ONLINE ONLINE rac1
    ONLINE ONLINE rac2
    ora.asm
    ONLINE ONLINE rac1 Started
    ONLINE ONLINE rac2 Started
    ora.gsd
    OFFLINE OFFLINE rac1
    OFFLINE OFFLINE rac2
    ora.net1.network
    ONLINE ONLINE rac1
    ONLINE ONLINE rac2
    ora.ons
    ONLINE ONLINE rac1
    ONLINE ONLINE rac2
    ora.registry.acfs
    ONLINE ONLINE rac1
    ONLINE ONLINE rac2
    Cluster Resources
    ora.LISTENER_SCAN1.lsnr
    1 ONLINE ONLINE rac1
    ora.cvu
    1 ONLINE ONLINE rac2
    ora.oc4j
    1 ONLINE ONLINE rac2
    ora.rac1.vip
    1 ONLINE ONLINE rac1
    ora.rac2.vip
    1 ONLINE ONLINE rac2
    ora.scan1.vip
    1 ONLINE ONLINE rac1
    [root@rac2 bin]#
    Plz help me out of this.
    Thanks !!!
    rohit
    http://dbarohit.blogspot.in/

    Kindly verify that the clusterware installation has been done successfully with the following verification utility:
    cluvfy stage -post crsinst -n rac1,rac2 -verbose.
    If the output contains any error, try fixing it first.
    And you can use SCAN ip in /etc/hosts only if you are using 11.2.0.1 Grid software. But if you are using the later version, you have to define the DNS entry.

  • Problem with a context node mapped

    hi all,      
    i have a problem in a WD application, when i execute a certain RFC, the model node in the controller mapped to that RFC (model), does not fill itself with the data that the RFC suppose to bring as a result. it seems to get lost in some point (the data). i check and all seems to be fine. I bind the node, then i execute it and later i invalidate it. It's not a role problem i've checked already, and the RFC in the backend when i run it, shows me data. Anyone knows what could this be?...       
    Regards, 
    Mariana

    Well my context structure its like this
    + Zbapi_XYZ
      + OutputY
        + ReturnY
        + Table_XYZ (custom structure)
          -attribute_1
          -attribute_n
      + Return_IN ( bapireturn structure)
          -attribute_1
          -attribute_n
      +Table_XYZ_IN (custom structure)
          -attribute_1
          -attribute_n
      - attribute1
    This is a model node, all the attribute are model attribute and both Table_XYZ_IN and Table_XYZ are from the same type of structure.
    The binding is implemented in WdDoInit Method as follow:
    Zbapi_Sd_Consulta_Doc_Serial_Input bapiSdConsultaDocSerial =
                   new Zbapi_Sd_Consulta_Doc_Serial_Input();
              wdContext.nodeZbapi_Sd_Consulta_Doc_Serial_Input().bind(
                   bapiSdConsultaDocSerial);
    and the execution of the RFC is in a custom method call
    public void ejecutarSdConsultaDocSerial( java.lang.String serial )
    inside it has the follow code:
    String nombreFuncion = "ejecutarSdConsultaDocSerial: ";
              String mensaje = "";
              boolean error = false;
              wdContext.currentZbapi_Sd_Consulta_Doc_Serial_InputElement().setPsernr(
                   serial);
              try {
                   wdContext
                        .currentZbapi_Sd_Consulta_Doc_Serial_InputElement()
                        .modelObject()
                        .execute();
                   //Invalidates the output context node
                   //wdContext.nodeOutputSD().invalidate();
                wdContext.nodeZbapi_Sd_Consulta_Doc_Serial_Input().invalidate();   
                   //En la variable "mensaje" se almacena todos los mensajes de error concatenados
                   for (int i = 0; i < wdContext.nodeReturnSD().size(); i = i + 1) {
                        IReturnSDElement retorno =
                             wdContext.nodeReturnSD().getReturnSDElementAt(i);
                        if (retorno.getType().equals("E")) {
                             error = true;
                             mensaje = mensaje + " " + retorno.getMessage();
                   if (error) {
                        wdContext
                             .currentEstatusBAPIElement()
                             .setEstatusSdConsultaDocSerial(
                             0);
                        wdContext.currentEstatusBAPIElement().setMensajeError(
                             nombreFuncion + mensaje);
                   } else {
                        wdContext
                             .currentEstatusBAPIElement()
                             .setEstatusSdConsultaDocSerial(
                             1);
              } catch (Exception ex) {
                   wdContext
                        .currentEstatusBAPIElement()
                        .setEstatusSdConsultaDocSerial(
                        0);
                   wdContext.currentEstatusBAPIElement().setMensajeError(
                        nombreFuncion + ex.getMessage());

  • Tengo problemas de coneccion

    Hola con todos, tengo problemas de coneccion con la PC y el iPhone 6 plus me sale este error de mensaje: El iPhone no puede sincronizarse. No dispone de suficientes privilegios de acceso para ejecutar esta operación. Nose cual será el problema en si me gustaria que me ayudasen

    Buenos días, yo tengo el mismo problema pero con mi IPAD y esta actualizado a la ultima version 7.0.3. Estuve en Apple Store y me revisaron el terminal (por si era problema de antena) y todo estaba correcto. Ademas, en la tienda cogía la wifi de la propia tienda y del propio centro comercial. La solucion que me dieron en la tienda fue la de reestablecer el IPAD... No lo he hecho todavia porque no me convence nada y os digo porque
    Es curioso que el IPAD coga las WIFI´s que no estan protegidas (hacer la prueba) y sin embargo tenga problemas para coger las WIFI´s que requieren una clave de acceso. Hice la prueba con mi IPHONE y el IPAD solo detecto las WIFI´s desprotegidas y mi IPHONE con version 6.1.3 detectó tanto las desprotegidas como las protegidas.
    No se si tiene algo que ver con actualizar el firmware de los routers ya que es posible que IOS 7 no sea compatible con los routers (VODAFONE en mi caso) que actualmente tenemos en casa o por donde puede ir el problema.
    Seguiré investigando y os cuento

  • Acquiring from bluetooth spp and draw signal

    Dear Sir:
    I'm using labview 8.5
    How can I use bluetooth vis to draw ecg signals coming from adc and sended to bluetooth module(as server) , and draw it??
    I've saw bluetooth client examples but I still need help
    thanks for help
    Sajed

    Hi,
    We have a similar problem. We're trying to visualize an ECG signal using a Bluetooth connection and LabView 8.
    The Bluetooth module we are using is a Parani ESD-200, and it works using the Serial Port Profile (SPP); we also have a MSI Bluetooth dongle which allow us to create a Virtual Comm and connect the Laptop and the ECG.
    We are using VISA to write and read from the virtual port; we don't have any problem with the reading, we configure and open the port and read the input data, but when we try to write, LabView doesn't recognize the port.
    The funny thing is that the data we try to send with LabView IS sent to the port, we know that because we programmed the DSP to turn on a led when it recibes any data in the input buffer...
    So, we don't know why LabView gives us that error, we'll be very thankful if anybody can help us...
    P.D. The error LabView gives is:
    VISA:  (Hex 0xBFFF003E) Could not perform operation because of I/O error.
    Mensaje editado por Luego

  • Cada vez que abro una página web me aparece el siguiente mensaje: Exc in ev handl: Error: Bad NPObject as private data! ¿cómo puede arreglarlo??

    Cada vez que abro una página web me aparece el siguiente mensaje: Exc in ev handl: Error: Bad NPObject as private data! ¿cómo puede arreglarlo?

    Please see solution in http://kb.mozillazine.org/Problematic_extensions
    for "McAfee Site Advisor".
    (Windows): For best results you should uninstall '''McAfee Site Advisor''' from Control Panel > add/change programs (Programs and Features). Reboot the system. Then Reinstall from http://www.siteadvisor.com/ and reboot the system. When installing refuse other suggested (crapware) applications.
    <br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

  • Mensaje error disco

    Hola. De repente no he podido abrir un archivo psd y me sale este mensaje: "No se ha podido cumplir porque ha habido un error de disco". Lo curioso es que puedo ver la vista previa del archivo. (Adobe cs5 extended). El resto de los archivos si los veo normalmente. Gracias.

    Mylenium,
    You misinterpreted the question, which deals with a corrupted PSD file. 
    Correct (human) translation, not machine translation:
    Suddenly, I'm unable to open a PSD file and I get this error message: "Could not complete the request because of a disk error".  What's interesting is that I can see the preview embedded in the file. (Adobe cs5 extended).  I can open all other files normally.

Maybe you are looking for