Error number assignment table pointer (no.range object HRTABNR) - LSO_PSV2
Hi ALL
On LSO_PSV2, when i create a course:
Error number assignment table pointer (no.range object HRTABNR)
Any ideas?
Thanks in advance
Sony
Hi Sony,
Please go to SNUM t-code and make sure there exists an interval for object HRTABNR.
Regards,
Dilek
Similar Messages
-
EDI Error : "Number assignment for ML document is incorrect"
Hi All,
We are getting the below error in EDI invoice generation.
"Number assignment for ML document is incorrect".
We have checked the number range for Material Ledgers. And the status is fine.
We are using EDI for Inbound invoice creation.
Can any body please guide us to solve this issue?
Regards
RSHi Srikanth,
The document types are assigned to the Parnter. But how will it be related to the Material Ledger.
We are getting the error while number assignment for Material Ledger Document.
Did we miss any settings are missing related to Material Ledger?
Regards
RS -
Error in SAP HCM OM No valid interval found (internal number assignment)
Hi Experts,
I am facing a typical problem. When ever I am trying to create any OM Object from any transaction say PO10,PO13,PO12 what ever the system is giving an error "No valid interval found (internal number assignment". I have check every thing i.e. Number Range, PLOGI PLOGI in T77S0 but the situation remains same. It seems any how the system is not at all picking up any number range at all. Please suggest.
Samrat SarkarHi Samrat
Reading the above posts I think you are trying to create the number range as "01S". The reason that you may not be allowed to create a number range is because your plan version might be different.
Check the below node to see what is set as your active plan version:
Personnel Management --> Global Settings in Personnel Management --> Plan Version Maintenance --> Set Active Plan Version
Then while creating your number range subgroup you would have to create as PlanVersionObject type:
Example: Number assignment for plan version 10 / object type S then Subgroup 10S
Try this out. -
Transporting error! While transporting Number Range Object
Hi All,
Thanks in Advance.
I have created a Number Range Object(Not a interval range) in Development Box(SNUM). (We have 2 production box) I transported the Number Range object to 2 production box.
Number Range Object Transported successfully for one box. But It is not getting transport into other box.
Could you please help, to solve this problem.
is there any configuration?
<b><u>Error Log Detail.</u></b>
ADO import (12) Cancelled
Log generation messages ....................................... (000-999)
Log generation messages ....................................... (000-999)
Ended with return code: ===> 12 <===
Deleted from buffer ( Ended with errors )
I don't know, how to resolve this error.
Thanks Again!
Regards
AnandHi,
Please refer to the SAP note : 132020
Symptom
With the import of a transport request or the import of a patch with the SPAM, tp terminates during the ADO import with return code 12.
In the ADO import log file of the request, cancelled jobs are refered to. With transaction SM37, you can find a cancelled job, suitable for the import RDDDIC1L, in the job log with one of the following messages:
ABAP runtime error: ASSIGN_OFFSET+LENGTH_TOOLARGE
ABAP runtime error: Exclusion criterion "RDDDR310_ERR02" initialized
Additional key words
Cause and prerequisites
The ADO data file was not generated locally on a transport domain computer, rather it was, for example, transported with ftp and unpacked from out of an archive with CAR.
Solution
One cause could be that the data file for the ADO import was not transferred correctly. To check this, the following derivation steps are required:
Start the operating system command 'R3trans -l <Datenfile>' and check whether the data file for the ADO import is corrupt.
Assumed that a transport request is called C11K900123, the respective ADO data file D900123.C11 is also like this and stands in the subdirectory 'data', in the transport directory.
Compare the size of the data file in the transport directory with that of the original file. The size must be identical.
If a check shows that the data file is corrupt, transfer the data file again.
Award points iff it helps.
Regards,
GSR. -
Error: Number range for object RESB does not exist
Hi
I'm trying to convert a planned order (to purch requisition) partially via trxn code MD04. Upon saving I get the above error msg. The complete text of msg is as follows. I've maitained the number ranges of all the objects specified in this error msg. Can somebody explain on how to overcome this problem?
Many thanks
BE
Error Msg Text:
Number range for object RESB does not exist
Message no. 61501
Diagnosis
The system cannot create a document for an MRP element if no number
range or interval has been maintained in Customizing of MRP or if t
number range you have maintained is not allowed.
Below is a list of MRP elements that are affected:
Number range object MRP element
PLAF planned order (operative oder simulative)
EBAN purchase requisition
RESB dependent requirements
MDSM simulative dependent reqmts (long-term plannin
MDTB MRP list
Procedure
Check the number ranges in Customizing. If you do not have the necessa
authorization, please get in touch with your systems administration.Hi
Thanks for the reply. But I have maintained the number ranges for matl. reservations/dependant requirements at OMI2. Here is the screen shot..Do find anything wrong with it? Pl advice.
NR Object MRES/DREQ
No. From Number To Number Curr Number Ext
01 0000000001 8999999999 380 blank
02 9000000000 9500000000 blank checked
RB 9500000001 9999999999 blank checked
Number ranges for the plants are assigned to 01 (0000000001 to 8999999999).
thanks
BE
Edited by: Brian Elfie on Jan 10, 2008 11:27 AM -
Error occured in number assignment for object RESB
Hello all,
While creating the production order, I am getting error as "Error occured in number assignment for object RESB" ,
How to solve this error?
Regards,
SagarIn SNRO for Object RESB, check the definition i.e. the intervals, number ranges assigned, the buffer setup. If you're not familiar with this, seek help from your basis personnel.
-
J1I5 - 'Error occured in number assignment for object J_1IRG1'
Dear Friends,
Please help me.I got the following error while clicking on Register entry button.
"Error occured in number assignment for object J_1IRG1".
How can I correct it.
Regards,
Rubinmaintain numer ranges for this object.
or check in SNUM.
Regards
Peram -
J1i5 gives number assignment error for object j_1irg1
Hi Friends,
while executng j1i5 for update of RG1 register , system gives error "Number not assigned for object j_1irg1" whearas it is already maintained for the specified excise group(30 in my case & doc year 2008) via snro. Friends, Pl let me know where else I need to do any settings required for this.
Thanks & Best Regards,
Atul KDear Atul,
Check with:
T. Code: SNUM
Object: J_1IRG1
Excise Group: 30
Maintain the Number Range for the Financial Year.
Best Regards,
Amit
Note: Alternatively, check the same with:
T. Code: J1I9 -
Error in MIGO :Number range object for object J_1IINTNUM, year 2010, excise
Dear Experts,
While posting MIGO, System throws below error :
Mainintain number range object for object J_1IINTNUM, year 2010, excise
Maiintain number range object for object J_1IRG23A1, year 2010, excise
Maintain number range object for object J_1IRG23A2, year 2010, excise
Actually we are posting the MIGO for the fiscal year 2009, still i am getting error why ?
regards
rajakarthik.check the posting date what u r puting , it should be on or before 31/03/2010
i think this is only the issue dont looks like any other issue
or do one thing just o\go in SNRO and for J_1IINTNUM object put 9999 year and the number range
and try to post your transaction in 2009
hope this helps
Edited by: Umakant Bhangale on Apr 1, 2010 10:22 AM -
Error in Number range object - URGENT
I changed one attribute(let say X) of a characteristic(A) from dis to nav and transported to QA. The transport failed saying that the intervals for the number range object for X does not exist.
In DEV RSRV check on X, A shows no errors
any suggestions how can I fix this probtry attribute change run first if dont work try this
you can increase the number range buffering size... go to se37 use functional module rsd_cube_get and then click on the test/execute(f8) button, then put in your cube name , then for i_obj put in a and then for i_bypass put in x press the execute button. the click on the blue icon next to E_T_DIME. you se your dimensions there. you now need to increase the buffer size for the dimensions that are receiving high volumes of records. so on the same screen not the dimention tht you want to increase the size of, scroll to the right hand side extreme and note down the NOBJECT number starts with BID. then go to transaction SNRO, put in the number you noted down and click on the change icon.
Now in the edit tab on top drop down set up buffering and select main memory.
now under "No. of numbers in buffer type in 500
save and click yes to continue
setting the number range too low will not help in load performance significantly, whereas setting it too high will consume a lot of memory on the application server, which will effect other applications.monitor the memory usage during data loading to find an appropriate number.
hope this helps -
I created a number range Object in SNRO Trans, but while saving that object it is showing this error as 'Invalid call sequence for interfaces when recording changes' and further i am not able to proceed.
Rama,
What number range are you creating?
This error seems to be from the transport system. It is trying to record the changes into a transport request.
Cheers
Aneesh -
Error when creating interval for number range object
Hi,
I am trying to transport my BW stuff from QA to Production and I am getting the following error in the transport logs. The info objects are inactive in RSA1.
Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Activation Mode)
Characteristic YRESD: Error when creating interval for number range object BIM0000396
Can some body advise me what's wrong? Is something need to be maintained in number ranges?
Also when I am checking the objects in RSA1, I am getting a message saying "source system WD110 does not exist", WD110 is our dev system. How can I change the source system after transport?
Thanks.
Edited by: Raj G on Mar 20, 2008 11:38 AMAlso when I am checking the objects in RSA1, I am getting a message saying "source system WD110 does not exist", WD110 is our dev system. How can I change the source system after transport?
Which system are you checking this?
refer: Re: Transport Source Systems from DEV to Testing for step to map the source systems for transport -
Sequential numbers in non-buffered number range object
I need some help pointing in the right direction to analyze and prevent a problem with a NON-BUFFERED custom number range object.
This process works well. Once or twice however, sequences have been created with an apparent delay and are out of order. I don't know why, or where to look to diagnose the timing, etc. It's very difficult to recreate.
We have a custom number range object; ZFSEQ in SNRO that is responsible for assigning a sequential number to a series of flat files produced by number of different interfaces. Those interfaces all use the FM 'NUMBER_GET_NEXT' and then they build a file name with that sequence number. That object is not buffered.
During heavy volume of updates (where lots of these sequences are being called and created by different interfaces, the table NRIV is locked and released by each interface. During this time of heavy updates, we have an infrequent problem that has occurred where a standard sales order create created a sequence number that is greater than the sequence number generated by the delivery create. (The delivery was created a couple of minutes later than the order, yet the order created a flat file sequence number greater than that of the delivery.
I hypothesize that the flat file call for the order (using the FM 'NUMBER_GET_NEXT') was somehow delayed(because of heavy lock/usage of NRIV). The actual order document and delivery document were created normally. I also am thinking that buffering on the object would prevent this. I cannot at this time implement buffering on the object, but we are working towards that.
The order create originates from our e-commerce system through a webserive, and in SAP, flows like this:
Main webservice RFC: Z_ORDER_CREATE
Call Z_create_order_bgd IN BACKGROUND TASK
Call BAPI_SALESORDER_CREATEFROMDAT2 )
MV45AFZZ--> userexit_save_document.
call Z_FUNCTION_TO_GET_SEQUENCE
CALL FM 'NUMBER_GET_NEXT' <---- order create sequential file created
commit work.
The delivery sequential file is created in
MV50AFZ1 (the Delivery User Exit)
Where can I look to conclusively see what happened to delay our sales order sequence? What could be done to prevent it?
Thanks
Jeremy H.Just want to post the answer that we found to this issue and close it, though more comments are always welcome!
We are going to move forward with buffering the Z object for the range as studies have shown and all other consulting input seems to be that buffering will solve this problem. -
Hi
During data extraction im getting the following error message
"Error calling number range object ZMATNO for dimension D2"
pls help me out.. how should i proceed from here...
Thanks in advance,
Sowdha.Hi Sowdha,
First any way you have to correct the number range interval using RSRV. If it reports error with number range interval for this particular dimension.
(RSRV should report error when you check the dimension)
The reason(s) for the error could be:
1. The number range interval for this dimension is "Buffered"
2. There are not many "Dialog processes" available in the system
To avoid such error:
1. restrict the number of parallel processes while loading the data using the option
"PSA and then into Target"
2. or make sure that sufficient number of dialog processes available at the time of
loading
Check the note "708297" for details why the error occurs though it is not directly pointing to Dimension ID number ranges, the explanation suits your problem also.
Assign points if this helps.
thanks
sarma -
Number range object missing NRIV and cant activate IOBJ during import
Hi,
We have a number object RS_OBJNUMG in BW used for many infoobjects. However object doesnt exists in table NRIV and import for infoobjects are failing with error:
Interval 01 of number range RS_OBJNUMG is missing
message R7453
I thought that as when infoobjects are created they get automatically assigned to number range....
Can somebody help?
thankshi,
check if the similar problem
Error calling number range object 0MATERIAL for dimension D4 ( )
try transaction rsrv ? >> all elementry tests >> master data >> compare number range and maximum sid >> choose the infoobjects>> execute. press button 'correct error' if any error exists.
also try >> all combined tests >> master data >> check master data for characteristics.
hope this helps
Maybe you are looking for
-
Without realizing it, my daughter and I are both using my icloud account for our phones. Now I cannot go to the cloud without importing all of my daughter's data to my phone. Is there any way to remove her data from the icloud account or delete the
-
Is there a way to change an interactive text field back into a picture box?
I'm working on recreating an interactive form and I mistakenly made a picture box a text field when I should have turned it into a regular text box. I can't seem to find a way to change it back. All my boxes are lined up and sized perfectly right now
-
Character encoding in web gallery
Hi, When creating web galleries, LR seems to use UTF-8 encoding for it.. Can I change it to use ISO-Latin-1? I use mostly Finnish in the galleries, and UTF-8 causes some of the Finnish characters to show incorrectly. A test gallery where you can see
-
Error handle request; Root exception is: java.lang.NoSuchMethodError
Hello Guys, I am running EBS 11i, rdbms 10g on OEL4. After applying a bunch of patches to resolve some IE issues I ran into an error: "FRM-41072: Cannot create group ACTION_REC_GROUP" when trying to cancel a PO. An SR directed me to apply patch 82869
-
Activating match service with existing credit on (US) itunes account
Why I can't pay the match service with the credit already on my (us) acount - it requires me to enter new code? Is there a way to use my existing credit? Or I do have to buy a new code?