Error :number range interval 01 does not exist

Hi,
  i created a number range object Z_REPORTID in SNRO for autogenerated ids and later used the function module NUMBER_GET_NEXT. After execution i got the following error.
For object Z_REPORTID, number range interval 01 does not exist
Message no. NR751
Diagnosis
The database table NRIV has the delivery class 'C', i.e. the SAP default settings are only in client 000.
Procedure
Create the missing number range interval in customizing
Please help me to trace this out.
Thanks,
Anila

Hi
AFter creating the number range interval in SNRO you must TRANSPORT the interval. In the first screen --> Interval --> Transport.
Did you perform that step?
If you did that it should work well. Itried the same now and it is working fine.

Similar Messages

  • For object XABBELEGNR , number range interval  does not exist OMJ6

    Dear all
            I want to enter only the value between 1 to 5 in GR/GI Slip No for T.code Mb01,but it is not allowing it is showing as For object XABBELEGNR , number range interval  does not exist OMJ6.
    Kindly let me know how to proceed,so that i can enter value between 1 to 5 in that field.
    regards
    M.Chandra mohan

    hi
    u just go to tcode omc1.
    activate gr/gi slip for plant
    then create number range group code and assign it to plant ,storage location and movenent type combination.
    Then u can create the intervals thru OMJ6.
    Hope it helps
    rewrad if useful
    Rohit

  • Error-For object GL_LOCAL GBU1, number range interval  does not exist

    Hello experts
    I attempted to post a JVA cash call in GJ01 and I encountered the following error. It does not state what number range interval is missing and that is my issue. I checked the number range interval for local ranges and it exists, both for years 9999 and 2015.  I have checked the number ranges for each document type to make sure that they exist. I did not receive any conflict in the number ranges assigned to various document types. I had read somewhere that this could be related to non-leading ledgers and I am no FI expert. What could be the problem and how can I resolve this issue?. I am looking for your help and guidance.
    Please see the attached screenshots.
    Thank you.

    Hi Rahul
    Thank you for your response and help. I am actually in DEV and although it says something like transporting the interval and making note of any message, the Transport option is greyed.  So, I just executed tcode GB02 and went straight to Interval --> transport.
    Even after tcode GB02, Interval --> Transport, I received the same error while trying to post a transaction.

  • Number range "PO" does not exists *****Classic

    Hi Friends,
    We are in SRM 5.5 and classic mode is on and we require backend PO to be created. We have replicated all data from backend and trying to create a PO (ECDP Direct Material) and when we click the create button in 'Process Pur Order' it does not allow to create a PO and gives error "No range PO does not exist". The same error is thrown while we convert an accepted Bid into a PO from Bidding engine. We have made the following settings.
    Classic mode is on.
    internal No Range "PO" created in SRM under shopping cart and follow on document.
    Defined trnsc type ECDP and assigned this no range PO to it. It is Active.
    Defined External no range "PO" in ECC B/E client with matching range. (Marked external)
    Defined Doc Type ECDP in ECC and assigned this no range to it.
    In SRM under "Define Number Ranges per Backend System for Follow-on Documents" Maintained Log Sys as ECC Backend client and "PO" in PO number range.
    Also all relavent attributes are maintained including BSA.
    Is there any sttings which are missing how can we locate the problem. Any help in this would be highly appreciated.
    Also post this are there any special tips for PO Creation and transfer from Bidding Engine in Classic Mode? where can I find the links?
    Answers will be surely rewarded. Thanks
    Hussain

    Hi Guys,
    appologies to reply late. Actually the resolution is taken from the SDN itself with little changes.
    What we resolved is to fool the system by passing an ACC with a dummy cost centre.
    use ECC BADI u2018BBP_BADI_EXTREQ_OUTu2019 to assign a standard ACC but with a dummy cost centre.
    the SRM process for direct material is hardcoded hence this converts the direct procurement into indirect. The SRM SHC will contain the cost assignment tab.
    Now when you process this document and generate a PO the document type should be ECPO and then it will pick up the number range defined under "Shopping Cart and follow-on documents".
    **For a Direct Material system is hardcoded to look for a local number range irrespective of your scenario.
    Now while creating a PO from SRM use BADI BBP_CREATE_BE_PO_NEW  to check if the dummy cost centre exists then remove the CC and the ACC before creating the backend PO. The ECC PO will be that of direct material type.
    Thanks
    Hussain

  • Object ROUTING_N number range 01 does not exist

    My students all have this error, "Object ROUTING_N number range 01 does not exist", when they create and save routings. I tried to configure it using transaction code OP8B and OP62 as someone else suggested here. However, it still doesn't work. Anyone can help? Thanks a lot!

    It didn't work, either.

  • For object RV_BELEG , number range interval  does not exit

    I am receiving this error when trying to generate billing document type L2 for a newly created company code.
    Exisiting company codes are generating billing documents so obviously this is to do with a company code related definition.
    Any thouhgts ?
    -Mark

    Please check if the error is
    "For object RV_BELEG , number range interval does not exit"
    "For object RV_BELEG , number range interval <b>10</b> does not exit"
    10 used as an example here you may be getting any 2-digit alpha-numeric value in stead of 10.
    Also Check
    If you are using
    Include program : RV60AFZZ
    Routine: USEREXIT_NUMBER_RANGE
    If so then for each plant you have assign a number range for each billing type (L2- here).
    Thanks,
    Ashish

  • For Object RV_BELEG, number range SD does not exist

    Dear Gurus,
    I have created a sales order VA01 with 1 material, and when I try to print the invoice, I have the following message of error:
    'For Object RV_BELEG, number range SD does not exist'
    I have checked my output types, they have been rightly assigned to the invoice forms.
    OK, so If I have to assign number ranges to sales documents, how can I do that? Do I have to talk to FI guys to?
    Please help.
    Regards
    Christian

    Thats SD numbeer range that is missing. Each invoice has two numbers one in SD and one in FI.
    Just go to SNRO type RV_BELEG and maintain it (the name of the number range you have in your billing document type setup in spro)
    Piotr.

  • Number range 01 does not exist

    Hi Gurus;
    I am trying to create a Interest rate instrument with Product type 55G and Transaction type 200. Though the number range is defined in : SPRO  CFM  Basic Functions  SAP Business Partner for Financial Services  General Settings  Business Partner  Basic Settings  Number range and grouping  Define Number Ranges has No. Range as 01 but whenever I am trying to create this instrument for a particular co. code it is throwing an error as "Number range 01 does not exist". Has anybody got any idea for what to do?
    Regards;
    Sumanta

    Your error message is related to treasury transaction number and not about business partner number range.  Please check the following path and maintain number range:
    FSCM-TRM-Transaction manager-Money Market-Transaction Management-Transaction types-Define number ranges
    Transaction Code : TAC1.
    If this will not solve your error please try to have a look at the detailed error message and get back to the forum.
    thanks,
    Kumar

  • NUMBER RANGE OBJECT DOES NOT EXIST AT RELEASE

    Hi ,
    I am getting a message at production order release i.e.' NUMBER RANGE OBJECT DOES NOT EXIST' in CO01 for one order type whereas i am not getting for other.
    I maintained the order type in SNRO so order is getting created.

    Hi
    Maintain the N Range  in T code SNRO  for No Range Object AUFTRAG and also in t code CO82 assign the no range maintained in SNRO to the corresponding Order type by maintaining in GROUP in CO82
    Plz check and revert
    Regards
    Anupam Sharma

  • 0FISCPER : number range object does not exist

    Hi,
        We have got this error while trying to repair the infoobject :0FISCPER in RSD1.I have tried doing the repair but it did not work.I tried to create a new no range by snro but i was not able to do that.
         Can some pl help

    Hi
    Use RSRV  for this purpose
    There is a tab of master data in that u find lot many test even u can pull all elementary tests tab to the right side and perform all the tests or even u can pull one among the all tests ie number range interval to the right side enter your infooobject name and execute it and then press correct errors
    thanks
    puneet

  • BUPA BDoc Error "Tax Number Category IN0 Does Not Exist"

    Hi,
    I have a Bdoc error that I am working on.
    The BUPA_MAIN BDoc has a error message "Tax Number Category IN0 Does Not Exist".
    What object will be responsible in getting the Tax Number and Tax Type from R/3 to CRM?.
    This Tax Type Category No 'IN0', does not exist in R/3 table TFKTAXNUMTYPE, But still it is coming in the Bdoc from R/3. Is there a possibility that this value exists in any other table. It looks like this 'IN0' is standard SAP delivered value.
    There is also a note regarding this for you reference, Note no. 407719
    Thanks in advance,
    Reagrds,
    Siva Vutukuri.

    Hi Siva,
    Go to transaction R3AM1 and check whether you have downloaded the object DNL_CUST_TAX or not.
    Also you can maintain the Tax Number Category IN0 in transaction SPRO.
    Follow the mentioned link below:-
    SPRO->IMG->Cross application components-> SAP BP->BP-> basic settings-> Tax Number Categories->Maintain tax number categories.
    Here you can maintain the category IN0.
    After that reporcess the BDOCs.
    <b>Reward points if it helps!!</b>
    Best regards,
    Vikash

  • T-code kbk6 (actual posting price)  error " Layout 1-N01 does not exist. "

    i tried to see t-code kbk6   (actual posting - actual price)
    it's have error Layout 1-N01 does not exist. full error message i show you below.
    how should i do.  i tried to create 1-N01 in KP65 (create planning layouts for cost element planning)
    i got error message You chose a name in a reserved name range -> Choose another name
    what should i do ? 
    please help.
    Layout 1-N01 does not exist.
    Message no. K9151
    Diagnosis
    Planning layout 1-N01 entered by you or set by the planner profile does not exist in the current client.
    This can have the following causes:
    The planning layout has not yet been created in Customizing.
    The planning layout is a layout delivered by SAP that has not yet been imported into the client to which you have logged on.
    SAP planning layouts begin with a number, user-defined planning layouts do not.
    Procedure
    If you require the user-defined planning layout 1-N01, you must first create it in Customzing.
    If planning layout 1-N01 is a layout delivered by SAP, you must first import this from client 000 in Customizing.
    a) For layouts from General Controlling, choose Controlling -> General Controlling -> Production Start-Up Preparation -> Transport System Settings -> Transport Settings for Planning -> Import Standard Planning Layouts.
    b) For layouts from Profit Center Accounting, choose Enterprise Controlling -> Profit Center Accounting -> Tools -> Transport Customizing Settings -> Transport Settings for Planning -> Import Planning Layouts.

    Hi
    The solution is outlined in the long text of the error, you need to import 1-N01 from client 000.
    To import the Standard Planning Layout 1-N01 from Client 000 use transaction code OKBF. The menu path is SPRO - Controlling - General Controlling - Production Start Up Preparation - Transport Settings for Planning - Import Standard Planning Layouts.
    Find the layout and execute the import. This should resolve the error.
    Elaine

  • Compilation error[ORA-02289: sequence does not exist] ,even if dbVersion '9.3.350',so strange!

    I know the reason is that PL/SQL is pre-compilation, so now dbVersion < '9.3.350', even if I don't need get REFDESIG_ID_SEQ.nextval ,
    it will also cause this compilation error. So my question is how should I code that?
    When dbVersion < '9.3.350' , no sequence REFDESIG_ID_SEQ, just print '1####';
    else get REFDESIG_ID_SEQ.nextval , then print '2####'
    But now even if dbVersion < '9.3.350', it will cause compilation error[ORA-02289: sequence does not exist] .
    How to resolve this? Thanks a lot.
    declare
        maxid   number;
        nextid number;
        agileid number;
        v_date  date;
        dbVersion varchar(8):=0;
    begin
      select substr(value,1,7) into dbVersion from propertytable where parentid = 5001 and propertyid=37;
            DBMS_OUTPUT.PUT_LINE(dbVersion);
            if (dbVersion < '9.3.350') then
                  DBMS_OUTPUT.PUT_LINE('1####');
            else
                  DBMS_OUTPUT.PUT_LINE('2####');
                  select REFDESIG_ID_SEQ.nextval into agileid from dual;
            end if;
    end;

    In my DB, If dbVersion < '9.3.350' , no sequence REFDESIG_ID_SEQ
    When dbVersion >= '9.3.350' ,sequence REFDESIG_ID_SEQ will exist,
    Now my dbVersion < '9.3.350' , and this pl/sql also cause this error.
    SO how should I to resolve it ?
    Now I need a test case, if dbVersion < '9.3.350' , then print '1####';
    else , get REFDESIG_ID_SEQ.nextval   firstly , then print '2####'
    How should I code?Thanks  a lot.

  • Build Error : The name "LocalizedStrings" does not exist in the namespace

    I have localised my app to 5 languages, it builds and runs perfectly in Silverlight, but when i open the project in Blend to make changes 
    it shows the following error 
    The name "LocalizedStrings" does not exist in the namespace "clr-namespace:appname".
    Since it is bound, i need to build it, only then the text is visible :(
    Any suggestions?
    Alfah
    Alfahisham

    This is the declaration for the LocalizedStrings.cs
    namespace LoveCycles_Free
    public class LocalizedStrings
    public LocalizedStrings()
    private static LoveCycles_Free.AppResources localizedResources = new LoveCycles_Free.AppResources();
    public LoveCycles_Free.AppResources LocalizedResources
    get
    return localizedResources;
    And this is my App.xaml
    <Application
    x:Class="LoveCycles_Free.App"
    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
    xmlns:phone="clr-namespace:Microsoft.Phone.Controls;assembly=Microsoft.Phone"
    xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
    xmlns:shell="clr-namespace:Microsoft.Phone.Shell;assembly=Microsoft.Phone"
    xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" >
    <!--Application Resources-->
    <Application.Resources>
    <local:LocalizedStrings xmlns:local="clr-namespace:LoveCycles_Free" x:Key="LocalizedStrings" />
    <FontFamily x:Key="CicleSemi">C:/Users/PT3560003/AppData/Local/Microsoft/Expression/Blend/Font Cache/pj1jeoqe.v1v/Cicle Semi.ttf#Cicle Semi</FontFamily>
    <FontFamily x:Key="PeaSnow">CustomFonts/peasnow.ttf#Pea Snow</FontFamily>
    <FontFamily x:Key="CicleFina">CustomFonts/CicleFina.ttf#Cicle</FontFamily>
    <Style x:Key="AnimatedButtons" TargetType="Button">
    <Setter Property="Background" Value="Transparent"/>
    <Setter Property="BorderBrush" Value="{StaticResource PhoneForegroundBrush}"/>
    <Setter Property="Foreground" Value="{StaticResource PhoneForegroundBrush}"/>
    <Setter Property="BorderThickness" Value="{StaticResource PhoneBorderThickness}"/>
    <Setter Property="FontFamily" Value="{StaticResource PhoneFontFamilySemiBold}"/>
    <Setter Property="FontSize" Value="{StaticResource PhoneFontSizeMediumLarge}"/>
    <Setter Property="Padding" Value="10,3,10,5"/>
    <Setter Property="Template">
    <Setter.Value>
    <ControlTemplate TargetType="Button">
    <Border Background="Transparent">
    <VisualStateManager.VisualStateGroups>
    <VisualStateGroup x:Name="CommonStates">
    <VisualStateGroup.Transitions>
    <VisualTransition GeneratedDuration="0:0:0.2"/>
    </VisualStateGroup.Transitions>
    <VisualState x:Name="Normal"/>
    <VisualState x:Name="MouseOver"/>
    <VisualState x:Name="Pressed">
    <Storyboard>
    <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Foreground" Storyboard.TargetName="ContentContainer">
    <DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneBackgroundBrush}"/>
    </ObjectAnimationUsingKeyFrames>
    <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="BorderBrush" Storyboard.TargetName="ButtonBackground">
    <DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneForegroundBrush}"/>
    </ObjectAnimationUsingKeyFrames>
    <DoubleAnimation Duration="0" To="0.812" Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.ScaleX)" Storyboard.TargetName="ButtonBackground" />
    <DoubleAnimation Duration="0" To="0.694" Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.ScaleY)" Storyboard.TargetName="ButtonBackground" />
    </Storyboard>
    </VisualState>
    <VisualState x:Name="Disabled">
    <Storyboard>
    <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Foreground" Storyboard.TargetName="ContentContainer">
    <DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneBackgroundBrush}"/>
    </ObjectAnimationUsingKeyFrames>
    <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="BorderBrush" Storyboard.TargetName="ButtonBackground">
    <DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneDisabledBrush}"/>
    </ObjectAnimationUsingKeyFrames>
    <DoubleAnimation Duration="0" To="0.245" Storyboard.TargetProperty="(UIElement.Opacity)" Storyboard.TargetName="ButtonBackground" />
    </Storyboard>
    </VisualState>
    </VisualStateGroup>
    </VisualStateManager.VisualStateGroups>
    <Border x:Name="ButtonBackground" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}" CornerRadius="0" RenderTransformOrigin="0.5,0.5">
    <Border.RenderTransform>
    <CompositeTransform/>
    </Border.RenderTransform>
    <Border.Background>
    <ImageBrush Stretch="Fill" ImageSource="Images/02/but_bg_settings.png"/>
    </Border.Background>
    <ContentControl x:Name="ContentContainer" ContentTemplate="{TemplateBinding ContentTemplate}" Content="{TemplateBinding Content}" Foreground="{TemplateBinding Foreground}" HorizontalContentAlignment="{TemplateBinding HorizontalContentAlignment}" Padding="{TemplateBinding Padding}" VerticalContentAlignment="{TemplateBinding VerticalContentAlignment}" FontSize="20"/>
    </Border>
    </Border>
    </ControlTemplate>
    </Setter.Value>
    </Setter>
    </Style>
    <Style x:Key="AddButton" TargetType="Button">
    <Setter Property="Background" Value="Transparent"/>
    <Setter Property="BorderBrush" Value="{StaticResource PhoneForegroundBrush}"/>
    <Setter Property="Foreground" Value="{StaticResource PhoneForegroundBrush}"/>
    <Setter Property="BorderThickness" Value="{StaticResource PhoneBorderThickness}"/>
    <Setter Property="FontFamily" Value="{StaticResource PhoneFontFamilySemiBold}"/>
    <Setter Property="FontSize" Value="{StaticResource PhoneFontSizeMediumLarge}"/>
    <Setter Property="Padding" Value="10,3,10,5"/>
    <Setter Property="Template">
    <Setter.Value>
    <ControlTemplate TargetType="Button">
    <Border Background="Transparent">
    <VisualStateManager.VisualStateGroups>
    <VisualStateGroup x:Name="CommonStates">
    <VisualStateGroup.Transitions>
    <VisualTransition GeneratedDuration="0:0:0.2"/>
    </VisualStateGroup.Transitions>
    <VisualState x:Name="Normal"/>
    <VisualState x:Name="MouseOver"/>
    <VisualState x:Name="Pressed">
    <Storyboard>
    <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Foreground" Storyboard.TargetName="ContentContainer">
    <DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneBackgroundBrush}"/>
    </ObjectAnimationUsingKeyFrames>
    <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="BorderBrush" Storyboard.TargetName="ButtonBackground">
    <DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneForegroundBrush}"/>
    </ObjectAnimationUsingKeyFrames>
    <DoubleAnimation Duration="0" To="0.812" Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.ScaleX)" Storyboard.TargetName="ButtonBackground" />
    <DoubleAnimation Duration="0" To="0.694" Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.ScaleY)" Storyboard.TargetName="ButtonBackground" />
    </Storyboard>
    </VisualState>
    <VisualState x:Name="Disabled">
    <Storyboard>
    <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Foreground" Storyboard.TargetName="ContentContainer">
    <DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneBackgroundBrush}"/>
    </ObjectAnimationUsingKeyFrames>
    <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="BorderBrush" Storyboard.TargetName="ButtonBackground">
    <DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneDisabledBrush}"/>
    </ObjectAnimationUsingKeyFrames>
    <DoubleAnimation Duration="0" To="0.245" Storyboard.TargetProperty="(UIElement.Opacity)" Storyboard.TargetName="ButtonBackground" />
    </Storyboard>
    </VisualState>
    </VisualStateGroup>
    </VisualStateManager.VisualStateGroups>
    <Border x:Name="ButtonBackground" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}" CornerRadius="0" RenderTransformOrigin="0.5,0.5">
    <Border.RenderTransform>
    <CompositeTransform/>
    </Border.RenderTransform>
    <Border.Background>
    <ImageBrush Stretch="Fill" ImageSource="Images/02/but_bg_password.png"/>
    </Border.Background>
    <ContentControl x:Name="ContentContainer" ContentTemplate="{TemplateBinding ContentTemplate}" Content="{TemplateBinding Content}" Foreground="{TemplateBinding Foreground}" HorizontalContentAlignment="{TemplateBinding HorizontalContentAlignment}" Padding="{TemplateBinding Padding}" VerticalContentAlignment="{TemplateBinding VerticalContentAlignment}" FontSize="20"/>
    </Border>
    </Border>
    </ControlTemplate>
    </Setter.Value>
    </Setter>
    </Style>
    </Application.Resources>
    <Application.ApplicationLifetimeObjects>
    <!--Required object that handles lifetime events for the application-->
    <shell:PhoneApplicationService
    Launching="Application_Launching" Closing="Application_Closing"
    Activated="Application_Activated" Deactivated="Application_Deactivated"/>
    </Application.ApplicationLifetimeObjects>
    </Application>
    Alfahisham

  • Error installation - Payload path does not exist and no media record specified.

    Hi all,
    When I tried to install the photosohop CS5, the below errors keep prompting out. Can anyone help me solve these errors! Thanks!
    Exit Code: 7
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 70 error(s), 58 warning(s)
    ERROR: DS011: Payload path does not exist and no media record specified.
    ERROR: DS011: Payload path does not exist and no media record specified.
    ERROR: DS011: Payload path does not exist and no media record specified.
    ERROR: DS011: Payload path does not exist and no media record specified.
    ERROR: DS011: Payload path does not exist and no media record specified.
    ERROR: DS011: Payload path does not exist and no media record specified.
    ERROR: DS011: Payload path does not exist and no media record specified.
    ERROR: DS011: Payload path does not exist and no media record specified.
    WARNING: DW024: The payload: Adobe Photoshop CS5 Core  {7DFEBBA4-81E1-425B-BBAA-06E9E5BBD97E} requires a UI parent with following specification:
                    Family: Photoshop
                    ProductName: Adobe Photoshop CS5 Core_x64
                    This parent relationship is not satisfied, because this payload is not present in this session.
    WARNING: DW025: The payload with AdobeCode:  {A334FDED-DCCA-481E-B226-F902CCC419D2} has recommended dependency on:
                    Family: Adobe Web Suite CS5
                    ProductName: Adobe Media Encoder CS5 X64
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this payload from the dependency list.
    WARNING: DW025: The payload with AdobeCode:  {A334FDED-DCCA-481E-B226-F902CCC419D2} has recommended dependency on:
                    Family: Adobe Web Suite CS5
                    ProductName: Adobe Media Encoder CS5 Dolby WRAPPER X64
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this payload from the dependency list.
    WARNING: DW025: The payload with AdobeCode:  {A334FDED-DCCA-481E-B226-F902CCC419D2} has recommended dependency on:
                    Family: Adobe Web Suite CS5
                    ProductName: Adobe Media Encoder CS5 PCI WRAPPER X64
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this payload from the dependency list.
    ERROR: DW025: The payload with AdobeCode:  {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
                    Family: CoreTech
                    ProductName: Adobe Player for Embedding x64
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this dependency from list. Product may function improperly.
    ERROR: DW025: The payload with AdobeCode:  {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
                    Family: Shared Technology
                    ProductName: Photoshop Camera Raw (64 bit)
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this dependency from list. Product may function improperly.
    ERROR: DW025: The payload with AdobeCode:  {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
                    Family: CoreTech
                    ProductName: AdobeCMaps x64 CS5
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this dependency from list. Product may function improperly.
    ERROR: DW025: The payload with AdobeCode:  {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
                    Family: CoreTech
                    ProductName: Adobe Linguistics CS5 x64
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this dependency from list. Product may function improperly.
    ERROR: DW025: The payload with AdobeCode:  {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
                    Family: CoreTech
                    ProductName: AdobePDFL x64 CS5
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this dependency from list. Product may function improperly.
    ERROR: DW025: The payload with AdobeCode:  {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
                    Family: CoreTech
                    ProductName: AdobeTypeSupport x64 CS5
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this dependency from list. Product may function improperly.
    ERROR: DW025: The payload with AdobeCode:  {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
                    Family: CoreTech
                    ProductName: Adobe WinSoft Linguistics Plugin CS5 x64
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this dependency from list. Product may function improperly.
    WARNING: DW025: The payload with AdobeCode:  {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has recommended dependency on:
                    Family: Adobe Web Suite CS5
                    ProductName: Adobe Media Encoder CS5 X64
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this payload from the dependency list.
    WARNING: DW025: The payload with AdobeCode:  {E8815668-95B0-443D-AC92-2BFD7DD8F16A} has recommended dependency on:
                    Family: Adobe Web Suite CS5
                    ProductName: Adobe Media Encoder CS5 X64
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this payload from the dependency list.
    ERROR: DW025: The payload with AdobeCode:  {F9766AC1-1461-1033-B862-DF8FE1C033BE} has required dependency on:
                    Family: InDesign
                    ProductName: Adobe InDesign CS5 Icon Handler x64
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this dependency from list. Product may function improperly.
    WARNING: DW025: The payload with AdobeCode:  {F9766AC1-1461-1033-B862-DF8FE1C033BE} has recommended dependency on:
                    Family: Adobe Web Suite CS5
                    ProductName: Adobe Media Encoder CS5 X64
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this payload from the dependency list.
    ----------- Payload: {08D2E121-7F6A-43EB-97FD-629B44903403} Microsoft_VC90_CRT_x86 1.0.0.0 -----------
    ERROR: Install MSI payload failed with error: 1612 - The installation source for this product is not available. Verify that the source exists and that you can access it.
    MSI Error message:
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Adobe CSXS Infrastructure CS5: Install failed
    ERROR: DW050:  - Microsoft_VC90_ATL_x86: Install failed
    ERROR: DW050:  - Adobe Media Player: Install failed
    ERROR: DW050:  - SiteCatalyst NetAverages: Install failed
    ERROR: DW050:  - Microsoft_VC90_CRT_x86: Install failed
    ERROR: DW050:  - Adobe Photoshop CS5 Support: Install failed
    ERROR: DW050:  - Adobe Bridge CS5: Install failed
    ERROR: DW050:  - Microsoft_VC80_ATL_x86: Install failed
    ERROR: DW050:  - DeviceCentral_DeviceCentral3LP-en_GB: Install failed
    ERROR: DW050:  - Creative Suite 5 Master Collection: Install failed
    ERROR: DW050:  - Adobe XMP Panels CS5: Install failed
    ERROR: DW050:  - Adobe Player for Embedding: Install failed
    ERROR: DW050:  - Photoshop Camera Raw: Install failed
    ERROR: DW050:  - AdobeColorCommonSetCMYK: Install failed
    ERROR: DW050:  - AdobeHelp: Install failed
    ERROR: DW050:  - Camera Profiles Installer: Install failed
    ERROR: DW050:  - Adobe Mini Bridge CS5: Install failed
    ERROR: DW050:  - AdobeColorJA CS5: Install failed
    ERROR: DW050:  - Adobe ReviewPanel CS5: Install failed
    ERROR: DW050:  - Adobe BrowserLab CS Live: Install failed
    ERROR: DW050:  - Microsoft_VC90_MFC_x86: Install failed
    ERROR: DW050:  - CSXS Story Extension: Install failed
    ERROR: DW050:  - Suite Shared Configuration CS5: Install failed
    ERROR: DW050:  - Adobe Linguistics CS5: Install failed
    ERROR: DW050:  - PDF Settings CS5: Install failed
    ERROR: DW050:  - DeviceCentral: Failed due to Language Pack installation failure
    ERROR: DW050:  - AdobeTypeSupport CS5: Install failed
    ERROR: DW050:  - AdobeColorVideoProfilesCS CS5: Install failed
    ERROR: DW050:  - AdobeColorCommonSetRGB: Install failed
    ERROR: DW050:  - Adobe Photoshop CS5 Core: Failed due to Language Pack installation failure
    ERROR: DW050:  - Adobe Photoshop CS5 International English Language Pack_AdobePhotoshop12-en_GB: Install failed
    ERROR: DW050:  - Adobe CSXS Extensions CS5: Install failed
    ERROR: DW050:  - AdobeOutputModule: Install failed
    ERROR: DW050:  - Microsoft_VC80_CRT_x86: Install failed
    ERROR: DW050:  - Adobe Illustrator CS5: Failed due to Language Pack installation failure
    ERROR: DW050:  - Adobe WinSoft Linguistics Plugin CS5: Install failed
    ERROR: DW050:  - AdobeColorEU CS5: Install failed
    ERROR: DW050:  - AdobePDFL CS5: Install failed
    ERROR: DW050:  - HIL Help Search: Install failed
    ERROR: DW050:  - AdobeCMaps CS5: Install failed
    ERROR: DW050:  - AdobeColorNA CS5: Install failed
    ERROR: DW050:  - Required Common Fonts Installation: Install failed
    ERROR: DW050:  - Adobe SwitchBoard 2.0: Install failed
    ERROR: DW050:  - Adobe Illustrator CS5_AdobeIllustrator15en_GBLanguagePack: Install failed
    ERROR: DW050:  - Microsoft_VC80_MFC_x86: Install failed
    ERROR: DW050:  - AdobeColorPhotoshop CS5: Install failed
    ERROR: DW050:  - Microsoft_VC80_MFCLOC_x86: Install failed
    ERROR: DW050:  - Recommended Common Fonts Installation: Install failed
    ERROR: DW050:  - Adobe Extension Manager CS5: Install failed
    ERROR: DW050:  - AdobeJRE: Install failed
    ERROR: DW050:  - Adobe ExtendScript Toolkit CS5: Install failed
    ERROR: DW050:  - Adobe AIR: Install failed

    Hi,
    I have followed the instructions and download the products, but there is still error.
    I have downloaded the one that is circled in red. is that compatible with my com?
    And these are the errors:
    Exit Code: 6
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 45 error(s), 41 warning(s)
    WARNING: DW024: The payload: Adobe Photoshop CS5 Core  {7DFEBBA4-81E1-425B-BBAA-06E9E5BBD97E} requires a UI parent with following specification:
              Family: Photoshop
              ProductName: Adobe Photoshop CS5 Core_x64
              This parent relationship is not satisfied, because this payload is not present in this session.
    ----------- Payload: {92D58719-BBC1-4CC3-A08B-56C9E884CC2C} Microsoft_VC80_CRT_x86 1.0.0.0 -----------
    ERROR: Install MSI payload failed with error: 1612 - The installation source for this product is not available. Verify that the source exists and that you can access it.
    MSI Error message:
    ----------- Payload: {08D2E121-7F6A-43EB-97FD-629B44903403} Microsoft_VC90_CRT_x86 1.0.0.0 -----------
    ERROR: Install MSI payload failed with error: 1612 - The installation source for this product is not available. Verify that the source exists and that you can access it.
    MSI Error message:
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    ----------- Payload: {2F6B67F4-A2BB-45D7-A80C-25FF646CC1C5} Adobe Player for Embedding 3.1.0.0 -----------
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    ----------- Payload: {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 -----------
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    ----------- Payload: {3BF96AC2-0CA1-11DF-B07B-459956D89593} AdobeHelp 1.0.0.0 -----------
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    ----------- Payload: {15FEDA5F-141C-4127-8D7E-B962D1742728} Adobe Photoshop CS5 12.0.0.0 -----------
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Adobe CSXS Infrastructure CS5: Install failed
    ERROR: DW050:  - Microsoft_VC90_ATL_x86: Install failed
    ERROR: DW050:  - Adobe Media Player: Install failed
    ERROR: DW050:  - Microsoft_VC90_CRT_x86: Install failed
    ERROR: DW050:  - Adobe Photoshop CS5 Support: Install failed
    ERROR: DW050:  - Adobe Bridge CS5: Install failed
    ERROR: DW050:  - Microsoft_VC80_ATL_x86: Install failed
    ERROR: DW050:  - DeviceCentral_DeviceCentral3LP-en_GB: Install failed
    ERROR: DW050:  - Adobe XMP Panels CS5: Install failed
    ERROR: DW050:  - Photoshop Camera Raw: Install failed
    ERROR: DW050:  - AdobeColorCommonSetCMYK: Install failed
    ERROR: DW050:  - Adobe Mini Bridge CS5: Install failed
    ERROR: DW050:  - AdobeColorJA CS5: Install failed
    ERROR: DW050:  - Adobe ReviewPanel CS5: Install failed
    ERROR: DW050:  - Microsoft_VC90_MFC_x86: Install failed
    ERROR: DW050:  - Suite Shared Configuration CS5: Install failed
    ERROR: DW050:  - Adobe Linguistics CS5: Install failed
    ERROR: DW050:  - PDF Settings CS5: Install failed
    ERROR: DW050:  - DeviceCentral: Failed due to Language Pack installation failure
    ERROR: DW050:  - AdobeTypeSupport CS5: Install failed
    ERROR: DW050:  - AdobeColorVideoProfilesCS CS5: Install failed
    ERROR: DW050:  - AdobeColorCommonSetRGB: Install failed
    ERROR: DW050:  - Adobe Photoshop CS5 Core: Failed due to Language Pack installation failure
    ERROR: DW050:  - Adobe Photoshop CS5 International English Language Pack_AdobePhotoshop12-en_GB: Install failed
    ERROR: DW050:  - Adobe CSXS Extensions CS5: Install failed
    ERROR: DW050:  - AdobeOutputModule: Install failed
    ERROR: DW050:  - Microsoft_VC80_CRT_x86: Install failed
    ERROR: DW050:  - Adobe WinSoft Linguistics Plugin CS5: Install failed
    ERROR: DW050:  - AdobeColorEU CS5: Install failed
    ERROR: DW050:  - AdobePDFL CS5: Install failed
    ERROR: DW050:  - AdobeCMaps CS5: Install failed
    ERROR: DW050:  - AdobeColorNA CS5: Install failed
    ERROR: DW050:  - Required Common Fonts Installation: Install failed
    ERROR: DW050:  - Adobe SwitchBoard 2.0: Install failed
    ERROR: DW050:  - Microsoft_VC80_MFC_x86: Install failed
    ERROR: DW050:  - AdobeColorPhotoshop CS5: Install failed
    ERROR: DW050:  - Microsoft_VC80_MFCLOC_x86: Install failed
    ERROR: DW050:  - Recommended Common Fonts Installation: Install failed
    ERROR: DW050:  - Adobe Extension Manager CS5: Install failed
    ERROR: DW050:  - AdobeJRE: Install failed
    ERROR: DW050:  - Adobe ExtendScript Toolkit CS5: Install failed
    ERROR: DW050:  - Adobe AIR: Install failed
    Thanks.

  • Error: The preference path does not exist

    Subject:
    Error: The preference path does not exist:
    Oracle.Portal.Page(WWC-51000)]
    I can not resolve this error.
    Have you already experienced this error?
    I'm sending more information below.
    Regards, Dime
    DETAILS:
    ========
    ORACLE Product: iAS 9i EE, v1.0.2
    Platform: RedHat Linox 6.2, kernel 2.2.18
    HW Platform:
    IBM Intellistation 6889, Intel P2 350MHz, 384MB
    Problem:
    After successful installation of the Application Server and data base creation, the installation of ORACLE Portal 3.0.6 is successful too, but the following message
    appears when we try to access the URL http://servername:port/pls/portal30:
    Error: The preference path does not exist:
    Oracle.Portal.Page (WWC-51000)
    About the Attachments:
    - init.ora.original (the original init.ora file)
    - init.ora.try1 (the file modified as described in the configuration guide)
    - init.ora.try2 (according suggestions in the discussion group on
    the ORACLE Metal Partners Site)
    - install.log (install.log generated with init.ora.try2)
    Regards,
    Dimitar Indovski,
    GORD Systems
    ATTACHMENT-1 (init.ora.original)
    db_name=DEFAULT
    db_files= 80 # SMALL
    db_file_multiblock_read_count = 8 # SMALL
    db_block_buffers = 100 # SMALL
    shared_pool_size = 3500000 # SMALL
    log_checkpoint_interval = 10000
    processes = 50 # SMALL
    parallel_max_servers = 5 # SMALL
    log_buffer = 32768 # SMALL
    max_dump_file_size = 10240 # limit trace file size to 5 Meg each
    global_names = TRUE
    control_files = (ora_control1, ora_control2)
    ATTACHMENT-2 (init.ora.try1)
    db_name=DEFAULT
    db_files = 80 # SMALL
    db_file_multiblock_read_count = 8 # SMALL
    db_block_buffers = 100 # SMALL
    shared_pool_size = 3500000 # SMALL
    log_checkpoint_interval = 10000
    processes = 50 # SMALL
    parallel_max_servers = 5 # SMALL
    log_buffer = 32768 # SMALL
    max_dump_file_size = 10240 # limit trace file size to 5 Meg each
    global_names = TRUE
    control_files = (ora_control1, ora_control2)
    max_enabled_roles = 25
    open_cursors = 50
    compatible = 8.1.0
    java_pool_size = 20
    ATTACHMENT-3 (init.ora.try2)
    db_name=DEFAULT
    db_file_multiblock_read_count = 16
    db_block_buffers = 550
    shared_pool_size = 31457280
    log_checkpoint_interval = 10000
    processes = 100
    parallel_max_servers = 5
    log_buffer = 32768
    max_dump_file_size = 10240
    global_names = TRUE
    control_files = (ora_control1, ora_control2)
    open_cursors = 300
    large_pool_size = 45000000
    java_pool_size = 32768000
    db_block_size = 8192
    ATTACHMENT-4 (install.log.gz)
    -----------------------------

    Dennis
    A general shared_pool_size Q&A is part of the Troubleshooting Guide on OTN: http://technet.oracle.com/products/iportal/htdocs/portal_troubleshooting.htm
    The Configuration Assistant determines the shared pool size from the view v$parameter,
    which lists information about the initialization parameters (populated from init.ora file). If the shared_pool_size value is more than 15728640 (for a default installation), you pass the minimal requirements set by the Portal Installer. Make sure you actually write out all the digits (i.e. 1000000000) and don't use abbreviations (1000M). Currently, the Configuration Assistant does a numeric check against the values that are set and cannot resolve the abbreviate syntax.
    Also try running the sql [select value from v$parameter where name like 'shared_pool_size';] to check if the changes you are making in the init.ora is really getting populated in the v$parameter view. As long as you restart the database once you make the change in init.ora, it should take effect.
    null

Maybe you are looking for

  • How to get the output of a single command from multiple servers using power shell

    Hi All, I have a requirement in my project, wherein I have to find the database list on each server which has autoshrink option is enabled. Below is the query which I'm using and I want to automate it in such a way that, I can give the input to power

  • Error in TB-OUTLOOK-ADDIN 4611 subUpdateSender 4...

    This has been going on for months and I've written to the mail in support over and over again and can't seem to get ANY help regarding this... Also, when the error happens I get a pop-up asking if I want to send in an email to Skype support but it bo

  • ITunes keeps playing music videos in fullscreen mode.

    Hi, I'm having this issue with itunes 10.4 Everytime a music video plays on itunes it goes fullscreen! Even if i'm using safari for instance, my space it's changed to the fullscreened video and it doesnt even show up, its just a black screen with the

  • Connect iMac 24" with a Surfborad 4101

    How do I should connect my new imac 24" with the SURFboard 4101 that I already use with a PC? Many thanks for your kind support

  • [svn:fx-trunk] 11171: Add overlay property to GroupBase.

    Revision: 11171 Author:   [email protected] Date:     2009-10-26 16:24:13 -0700 (Mon, 26 Oct 2009) Log Message: Add overlay property to GroupBase. Note, names of class and APIs will change, since it's still in review. QE notes: Ready testing, names w