Error "Nvidea Open GL Driver detected problem"

This is a new system build. win 7 pro service pack1 with an i7, with ssd's and 48 gig ram. CS 6.03 with mercury playback enabled. I came from cs4.
I have 2 quadro CX cards (not sli). I don't know which version of cuda they have, but I have run the nvidia Smart Scan and its says my drivers are up to date. The current drivers are 9.18.13.697 (from device properties or 306.97 from the smart scan).
Premeire loads and I can do a little editing, but the message
"Nvidea open GL Driver detected a problem with the display driver and is unable to continue. The application must close.
Error code 3."
which shuts down premeire, and in another instance, I got the BSOD.
Where do I go from here?
Is there a firmware update on the CX cards? How can I tell which version of cuda it is using?

I tried removing one cx card and still get the message.
I purchased a geforce gtx 680 which has 4 monitor support. In premiere, I started loading many effects on a clip and could see the gpu & memory being used with good results.
However with AE, in the gpu monitor didn't even get past 1% with no memory usage. The batch comp renders where at least 10x longer. When I switched to ray tracing and tried to put a bevel effect on an extruded 3d text, it moved to a crawl as no cuda cores were apparently used.
I tried to put on the geforce to quadro soft patch. But the device ID of a 680 has no counterpart quadro (10de).
Quick recap for anyone else in my shoes
1) CX with 2000 failed to bootstap. Probably due to different types of memory (gddr3 and gddr5).
2) 2 cx's have fatal isues both AE (raytrace) and Pr (in mercury engine with cuda on).
3) Single CX has fatal issue in AE (raytrace) and didn't bother testing in Pr. I need 4 monitors.
4) geforce 680 works very well in Pr, but worthless in AE (both ray tracing and classic rendering). Gens took 10x longer.
5) Currently attempting 4 monitors with 2 quadro 2000s.
So after paying one restocking fee on my returned quadro 2000 the first time around when I tried to get it to work with my existing CX card (fail), I have ordered 2 more quadro 2000's and will try again. I now I will have to pay a restocking fee for the 680.
In sum, 2 monitors is easy, but getting 4 monitors with cuda support at a reasonable price has always been a pita.

Similar Messages

Help with ati open-source driver :what problems with my xorg.conf?

I removed vesa driver and then :
sudo pacman -S xf86-video-ati libgl
I have browser http://wiki.archlinux.org/index.php/ATI
I add me to the group video,add radeon to my rc.conf.
and changed my xorg.conf like that.and then I type "startx",It did work,but the resolution is not right (it should be 1027x768 but I got a resolution 640x480),and I run glxinfo it said :"unable to open display"
I'm sure the HorizSync VertRefresh is right besause when I try catalyst it works well :<
my card is ati X550
Here's my config:(can anyone who's ati card work with open-source driver works well give me your xorg.conf ?THX!)
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "radeon"
Load "glx"
Load "record"
Load "extmod"
Load "xtrap"
Load "GLcore"
Load "dbe"
Load "dri"
Load "drm"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 320 240 # mm
Identifier "Monitor0"
VendorName "KTC"
ModelName "1700"
### Comment all HorizSync and VertRefresh values to use DDC:
HorizSync 28.0 - 80.0
VertRefresh 50.0 - 200.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RV370 [Sapphire X550 Silent]"
Option "XAANoOffscreenPixmaps" "true"
Option "AGPMode" "4"
Option "ColorTiling" "on"
Option "AccelMethod" "EXA"
Option "EnablePageFlip" "on"
Option "AGPFastWrite" "true"
BusID "PCI:1:0:0"
EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection

Ok, seems like you don't use [testing] because in this case x wouldn't even start, because RgbPath in the Section "Files" doesn't exist anymore and has to be removed.
I do always recommend people to disable any kind of options in the Section "Device", if there are problems with the video card. You usually do not have to put radeon neigher into the Section "Module", nor into rc.conf! So remove them, radeon should be loaded because it's set as Driver in the Section "Device"
Your problem with wrong resolution ... I'm not an expert in this, didn't ever have such a problem, but are you sure, that your HorizSync and VertRefresh values are right?

Hard drive detection problem - PLEASE HELP!!!!

I'm about at my wits end with this problem. One of my drives crashed over the weekend, and since then the replacement drive never gets detected. When I have the second drive installed, my computer never gets past the "Verifying DMI Pool Data", then says disk boot failure. When I take out the second drive, my computer boots fine. I've tried different jumper settings, thinking maybe i looked at the diagram backwards, disconnecting my DVD drive and putting the hard disk on the secondary IDE, and installing the new drive as the master and installing Windows on it, with the old drive as the slave. Nothing has worked. As soon as I connect a second hard drive, I get a disk boot failure. I've checked the boot priority a hundred times, and it's correct. In case it was a power supply problem, I removed everything except the two hard drives and some RAM, and that didn't fix anything. I'm lost as to where to go from here. My computer works fine without the second drive, but I need the second drive for gaming.
I'm now thinking it may be the motherboard, because a couple things have happened over the last month. First, all of a sudden I got a CMOS checksum error, then about a week and a half ago the onboard NIC died. And when I installed the updated drivers and flashed the BIOS, on restart I received an error message saying something was wrong with the overclocking settings and had been reset to the default values. The problem with that is I never overclock anything.
I'm not even sure the old drive actually crashed anymore. I heard clicking coming from the computer, and when I all of a sudden lost access to the drive, I assumed it crashed. But now that I am unable to get the brand new drive to work, I'm thinking I need to get a new motherboard. I'm trying to avoid that as long as I can though because this one is only 5 months old.
Would a possible solution be to just leave the master on IDE, and buy a SATA drive to use as a second disk? Or does mixing IDE and SATA cause issues?
Thanks for any help anybody may be able to offer.
Anyway, here are my system specs:
K8N Neo4 motherboard
Athlon64 3200+
2.5 GB RAM - 3x 512 and 1x 1GB stick
Boot disk - Western Digital 120GB ATA 100 IDE
Old Slave - Seagate 60GB ATA 100 IDE
New Slave - Western Digital 120GB ATA 100 IDE
NIC - Linksys 10/100
DVD-RW - Mad Dog Multimedia
DVD-ROM - Sony
Graphics - GeForce 7800GTX
Sound - Mad Dog Entertainer 7.1
Power Supply - 420W

Quote
putting the hard disk on the secondary IDE, and installing the new drive as the master and installing Windows on it, with the old drive as the slave.
Does the 2nd HD work then, were you able to boot up and install Windows?
Does BIOS detect it?
Have you tried a new IDE cable?
Make sure that all the pins are properly in and not loose in the molex connector to the HD.
Have you tried using the new drive alone on IDE-1 or 2?
Have you tried clearing CMOS? remove P/S AC cord, press case power button a few times to drain remaining power then clearing CMOS buy way of the jumper.
Quote
I'm trying to avoid that as long as I can though because this one is only 5 months old
Did you buy this MB new?
If so you could RMA it.

P965 hard drive detection problem

Hi,
I have the latest bios for the P965 platinum, using 4 drives in AHCP mode.
For some reason the board insists on re-detecting all drives on most reboots or startups and it's quite a slow process.
Just occasionally it knows what's there and sails through quickly. Anyone else had this problem?
I've been into the bios to check things, and the drives are happily listed there, so why the redetect most times?
Frustrating...
thanks for any help....Lozzy

Quote from: Sekunda on 13-July-07, 20:52:49
i have this same (small) issue sometimes, it's not a big deal since it only happens on RE-boot, not normal start-up from shut off state.
True, it is a small issue, but it's irritating since I'm reinstalling windows at the moment which involves a lot of reboots, hence the query.

Single sata drive detection problem

Ok here is my problem that I am pulling my hair out over.
I purchased k7n2 delta ilsr and a sata 10000 WD raptor drive yesterday.
I am trying to install the single drive in my system and the os will not detect the drive.
This is the steps I have been taking to no avail.
1. On boot up pressing ctrl f to set up a stripe raid array (required even if there is only one drive)
2. reboot and boot to western digital data lifeguard tools and format the drive. (This program sees the drive just fine and says its functional.)
3. Reboot and set the bois to boot to os cd, reboot and run the w2000 cd and hit F6 when prompted. Then it prompts me to install the promise 376/378 fastrack drivers which I do and it installs them. then it leads me to the prompt to install the os and it says setup did not find any hard disk drives installed.
I have tried many variations of this to no avail, what am I missing?

I romoved the jumper in the jumper block with no change, the floppy drive installs the promise drivers fine, I d/l the larger file folders for the promise drivers with no change.
the drive is attached to sata1, I moved it to sata 2 with no change.
The only thing I can think of is a bios setting I am missing, I cannot see the drive in the bios only when I boot to the wd utility.
My other thought is according to the mobo manual it says to fdisk and format rather than using the data lifeguard utility I am using to format. I do not have the files to boot to dos, fdisk and format the drive. I made a msdos boot disk in xp and transfered format and fdisk to the floppy but the command in dos does not work. format ???? to where there is no drive designation.

Vista driver/detection problems with Zen

Ok, I've recently switched from Windows 2000 to Windows Vista 32-bit (different PC, not an upgrade) and i'm having trouble with my computer detecting my Micro 6GB AND installing the needed drivers- I no longer have the original software.
When I connect the player into the USB dri've, a prompt recognizes the player brand/type and asks me to either install the software via cd-rom or locate the files needed manually. I downloaded the Creative Mediasource Player/Organizer as well as Microsoft DirectX 0, yet the entire installation process runs smoothly until last minute when it notifies me that "setup is unable to detect a supported product on your system." I'm also unable to locate my player in the device manager through Windows Control Panel. It does, however, detect my Micro as a Zen product when i put it in Removable Disk mode.
Why does my operating system recognize my player initially, yet it doesn't detect it on my
system, rendering me unable to install the software? Thanks for any help.

No, and I had that thought in the back of my head- I figured the problem was with Windows Vista. It's not possible to update your firmware when your computer won't detect your player though, right?

Nvidia Open GL driver error when Photoshop CC is open

New PC, bought predominantly for Photoshop use. Downloaded trial of Photoshop CC and it keeps closing with this message -
"Nvidia Open GL Driver detected a problem with the display driver and is unable to continue. Tha application must close. Error Code 3"
This has happened with Photoshop just being open, as well as when in use.
If I untick "use graphics processor", I have no problems. My use of Photoshop is fairly basic (processing and editing photographs from a Nikon D7100), so I don't know what I will miss if I don't use the graphics processor.
Intel i7-3770 Quad Core (3.4ghz 8mb cache)
16gb DDR3 1866 mhz
2GB Nvidia GeForce GTX660 graphics card
Windows 7 professional 64 bit
I have updated the graphics card driver, which made no difference. Can anyone help with suggestions of why I'm getting the error, and what I can do about it please?
Thank you
Chris

Had to re-install windows and all drivers for other reasons, and having downloaded Photoshop CC again, I no longer have the problem.
Chris

CF 10 getting random resets : Detail: [Macromedia][SQLServer JDBC Driver]A problem occurred when attempting to contact the server (Server returned: Connection reset).

These resets appear to coincide with a clearing of the cached queries for the DSN from memory, breaking all my sub queries that try to use the initial cached one. I am grasping at straws to discover the reset culprit, the DSN tests always show OK, there is not packet loss at the switch level. If anyone has some suggestions, I am all ears!
The resets are completely random and under no load. My sql 2008 r2 box is set to unlimited connections.
An example of a DSN setup is :
Maintain Connections [x]
String Format [ ]
Max Pooled Statements 100
Timeout 20 Interval 7
Query Timeout 0
Login Timeout 30
CLOB [ ]
BLOB [ ]
Long Text Buffer 64000
Blob Buffer 64000
Validate Connection [ ]
I am running the following :
CF Enterprise 10,0,13,287689
Tomcat 7.0.23.0
Ubuntu 1204 x64
Java VM 20.4-b02
Java 1.6 (Sun Microsystems Inc)
I have seen it suggested to uncheck the maintain connections advanced options but this doesn't seem like a good approach to the problem and will cause more stress on the sql box IMHO.
I have also seen it suggested to enable Validate Connection but documentation on this is a bit sparse...
Here are more examples of the initial reset error and then the subsequent cache related errors :
Database Error Information:
Native Error Code: 0
SQL State: 08S01
Query Error: [Macromedia][SQLServer JDBC Driver]A problem occurred when attempting to contact the server (Server returned: Connection reset). Please ensure that the server parameters passed to the driver are correct and that the server is running. Also ensure that the maximum number of connections have not been exceeded for this server.
Custom Error Code: 08S01
Database Error Information:
Native Error Code: 0
SQL State: n/a
Query Error:
Query Of Queries runtime error.
Table named GlobalDetails was not found in memory. The name is misspelled or the table is not defined.
Custom Error Code: n/a
Thanks in advance to anyone who has a suggestion.

Hi, could DBA check MS SQL Server connection logs???
May be server has some limits (for example sessions, memory and e.t.c.)

PE 13 crashes due to incompatible video driver detected. Running on Win 7 SP1 with ATI 540v video card/driver. Deleting bad driver file in adobe program data does not fix the problem, it simply replaces the text file and crashes again. My video driver

PE 13 crashes due to incompatible video driver detected. Running on Win 7 SP1 with ATI 540v video card/driver. Deleting bad driver file in adobe program data does not fix the problem, it simply replaces the text file and crashes again. My video driver is just fine. Any help out there?

rb
Your video card driver may be fine for something, but just not compatible with Premiere Elements 13/13.1.
For those with the display card error, the answers include
a. assure your video card/graphics card driver version is up to date according to the web site of the manufacturer of the card -
if necessary consider a driver roll back.
b. determine in Device Manager/Display Adapters if the computer is using 2 cards instead of 1
c. delete the BadDrivers.txt file
the rationale for that deletion is found in post 10 of the following older post...principle applies to 13 as well as 9.
Re: Premiere Elements 9 Tryout Serious Display Problem
Have you looked for computer ATI card settings that might be more compatible with Premiere Elements 13/13.1?
When is the program crashing - just opening a new project or rather crashing if editing a particular video format at the Timeline level?
ATR

App Store can no longer be opened. Immediate crash and error message "App Store can not be opened because of a problem"

App Store won't open, error message "App Store can not be opened because of a problem". I haven't been able to update anything for a week or so. I have used Disk Utility, Drive Genius, deleting the .plist, all to no avail. My Mac Mail hasn't worked since the upgrade to Mavericks. Mavericks can't see my LaCie Cloudbox. Can any of these be solved by me?

I have the same error "XXXX App cannot be opened because of a problem". And I also cannot open iTunes and get the error "This copy of iTunes is corrupted or is not installed correctly. Please reinstall iTunes."
Only Apple apps seem to be at issue here...
Repairing Permissions did not fix this.
I noticed this after the last Software update. Is there no fix other than re-installing?
Not happy that an Apple software update killed all my apps...

Problem with adobe reader x (10.0.1) error 1327 message. invalid drive: H:\

I AM HAVING A PROBLEM W ADOBE READER X (10.0.1) IT GIVES ME A ERROR 1327 MESSAGE INVALID DRIVE: H:\
I CAN NOT DELETE IT OR OPEN IT OR DO ANYTHING . WHEN IT TRIES TO REINSTALL IT BRINGS UP SCREEN ;
SET UP WAS INTERRUPTED BEFORE ADOBE READER X (10.0.1) COULD BE INSTALLED. YOUR SYSTEM HAS NOT BEEN MODIFIED.

O/P reports issue as resolved in http://forums.adobe.com/thread/1127028

When trying to open a PDF format using Adobe XI I get an error message that there's a problem opening the document (57)

When trying to open a PDF format using Adobe XI I get an error message that there's a problem opening the document (57)

Hi chasore,
Are you still facing this issue?
Is this issue happening with all the documents you have. If yes, i would suggest try uninstall and reinstall. Or if the documents are located on some shared drive try to copy them on local machine and test again.
Regards,
Ajlan Huda.

The driver detected a controller error on \Device\Harddisk1\D

Hope someone can help, yesterday in the event viewer I encountered the following error
"The driver detected a controller error on \Device\Harddisk1\D
....I have added no new hardware for months, I checked this out on the microsoft website but they recommend changing the cable!
I ran diagnostics on the hard drives and they found no errors at all ....I got a feeling it the motherboard, frustrating as this is the second board Ive had!
Can anyone advise on this error?
My setup is as follows
P4 3.2GHZ
1GB Transcend Memory
1 NEC 2510 DVD Wrtier
1 IDE 120GB Maxtor Diamond Max
2 X SATA HDD
450 watt Thermaltake Butterfly PSU

This seems to be a common problem between ICH5 chipsets and SATA NCQ drives. Apparantly a BIOS update will be able to fixed the problem but I'm not sure which BIOS you should use. I suggest that you check MSI's website to look into your mobo's BIOS release notes to find out more first.
Please also note that there's an amount of risk to flashing your mobo's BIOS as and improper flash will caused the mobo to die immediately or having multiple errors due to bad flash. I would recommend that you flash through a floppy bootdisk which seems to be the best method till date.

HP Pavilion A6528 P Error Code: Bio HD - 3 "No bootable drives detected."

Hi,
I initially had a Bio HD - 2 error message, the computer would not boot. So after unplugging and replugging the Sata cables and running the diagnostic test I concluded that the hard drive may be shot and since I do not have another computer with a sata interface to test the hard drive, I purchased a new HD (Western Digital with the exact same specs) and installed it. After the installation the computer still would not boot ,so I ran the diagnostic again and apparently the HD was recognized and passed but now I have a new error message stating that while testing: boot path, the error states Error code: Bio HD - 3 "No bootable drives detected."I searched the board and could not find the definition for this error code.
Please advise.
Thanks

Try this procedure:
Unplug the PC and open it up. Clean out all the dust. Carefully remove and replace all the cables going to the motherboard one at a time. Do the same for the memory dimms and the video and sound cards if you have any. Then clear the CMOS. Plug your PC back in a give it a go. You might consider trying to use a different motherboard sata port for your hard drive.
Unplug all external devices other than the mouse, keyboard and monitor.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Satellite P300-156 - driver detected controller error on \Device\Ide\IdePort1

Hi
I have recently installed a secondary hard drive in my P300-156 and am having some problems with it. I keep getting Event ID 11 in the system event log "The driver detected a controller error on \Device\Ide\IdePort1." and suffer with very bad performance with this drive.
The drive is new and works fine in other systems and even works ok if I swap drive bays on my P300-156 but the problem with that is the drive does not fit in the other bay as it is quite thick. The drive in question is a Samsung HM100UI 2.5" 1TB Sata. I have also tried other drives in this bay and they work ok too.
I am using windows 7 ultimate and Intel chipset drivers. It's an Intel ICH8M SATA AHCI controller, driver version 7.0.0.1013. Have tried different drivers and AHCI/IDE mode. Also tried a fresh installation and the problem persists.
Am at a loss why this drive is having problems is there anything else someone can suggest to try?
Thanks in advance.

> {quote:title=peterk_1 wrote:}{quote}
> Not all drive bays are made equal. The P500 second bay takes the "thicker" 2.5" drives.
>
> The current Intel chipset "driver" is v10. I have it installed BUT the installation if you want to do a complete install is not a simple task. If you download and unpack you can point the driver update to that location. Start at Intel.com
Thanks!! This worked! It seems the Intel INF auto update utility didn't update them to the latest. I had to download the [RST and AHCI Driver and GUI|http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=20110&lang=eng] and manually search for new drivers in device manager. Now the drive is noticeably quicker and error free :)
Thanks for all the help guys :)

Error "Nvidea Open GL Driver detected problem"

Similar Messages

Maybe you are looking for