Error: Object "Dot11BandSelect" does not exist.

Has anyone else received Error:Object "Dot11BandSelect" does not exist. when configuring the 802.11 settings on a 4400 WLC runing ver. 6.0.196.0
If so what did you do to resolve it.
Thanks
Barry

6.0.196.0 is a deferred code.
http://www.cisco.com/web/software/Wireless/Deferral/Software_Advisory_6_0_196_0.html
Are the global band select enabled, are you getting this error when enabling bandselect on a WLAN's advanced tab.

Similar Messages

Object SYS_PLSQL_534463_100_2 does not exist

I tried to compile a package spec ( header ) and got the error object SYS_PLSQL_534463_100_2 does not exist. The object SYS_PLSQL_534463_100_2 exists as a type and I granted all to public on that object. Any ideas?

Thanks dude. At least I got some idea where it could be messing up. I am using the pipelined functions with my own user-defined types. I went through the article and found something like following
Here is a simple way to bypass the bug before 9207 patchset is applied. Convert those PLSQL TYPEs which are used by table function in the package to Oracle Stored TYPEs. This way, you take control on packages, types and their relationships. Oracle won't version the stored TYPEs automatically as it does for the packaged TYPEs.
Do you know what exactly it means?
Hari

Error ACLContainer: 65315 does NOT EXIST in the Object Cache for parentID:

Expert,
I did the following steps to upgrade the OWB repository from 10g to 11g
• Created a dummy workspace in the 11.2 repository
• Created users in the destination environment
• Run Repository Assistant against the 11.1 source database
• Then selected *“Export entire repository to a file”* and selected the MDL(10g) to import
After 99% of completing I have got the below error
Error ACLContainer: 65315 does NOT EXIST in the Object Cache for parentID: 65314
Please let me know the solution.
Thanks,
Balaa...

Hi I had the same error and worked on it for almost a week with no success but there is few work around for this try it it might work for you.
Step 1>Run a health check on OWB 10.2 enviroment(make sure you clone your OWB 10.2 enviroment and then do this healthcheck ,these checks are tricky )
refer
Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
This will give you info about your missing ACL
Step 2> download these two scripts fixLostACLContainer.sql ,fixAllACLContainers.sql
please refer :
Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
OWB 10.2 - Internal ERROR: Can not find the ACL container for object (Doc ID 460411.1)
Note 754763.1 Repository Cleanup Script for OWB 10.2 and OWB 11.1
Note 460411.1 Opening Map Returns Cannot find ACL Containter for Object
Note 1165068.1 Internal Error: Can Not Find The ACL Containter For for object:CMPPhysical Object
It might resolve this ACL issue but it did not work for me.
If none of these work then
Perform export from design center of OWB 10.2 and import through design center of OWB 11.2.(ONLY OPTION)
It worked for me.
Varun

Error: Number range for object RESB does not exist

Hi
I'm trying to convert a planned order (to purch requisition) partially via trxn code MD04. Upon saving I get the above error msg. The complete text of msg is as follows. I've maitained the number ranges of all the objects specified in this error msg. Can somebody explain on how to overcome this problem?
Many thanks
BE
Error Msg Text:
Number range for object RESB does not exist
     Message no. 61501
Diagnosis
     The system cannot create a document for an MRP element if no number
     range or interval has been maintained in Customizing of MRP or if t
     number range you have maintained is not allowed.
     Below is a list of MRP elements that are affected:
     Number range object MRP element
     PLAF                 planned order (operative oder simulative)
     EBAN                 purchase requisition
     RESB                 dependent requirements
     MDSM                 simulative dependent reqmts (long-term plannin
     MDTB                 MRP list
Procedure
     Check the number ranges in Customizing. If you do not have the necessa
     authorization, please get in touch with your systems administration.

Hi
Thanks for the reply. But I have maintained the number ranges for matl. reservations/dependant requirements at OMI2. Here is the screen shot..Do find anything wrong with it? Pl advice.
NR Object                             MRES/DREQ
No.                          From Number            To Number          Curr Number          Ext
01                           0000000001               8999999999           380                    blank
02                           9000000000               9500000000           blank                  checked
RB                          9500000001               9999999999           blank                  checked
Number ranges for the plants are assigned to 01 (0000000001 to 8999999999).
thanks
BE
Edited by: Brian Elfie on Jan 10, 2008 11:27 AM

Object EXTERNAL_TABLE does not exist???

I've written the following function that references an external table within the same schema. When I try to execute the function, it returns an error that "object EXTERNAL_TABLE does not exist"
I've also tried creating a view that points to the external table and then pointing this function at the view but I still get the same error.
Any ideas on how to make this work? Thanks in advance!
CREATE OR REPLACE
FUNCTION ugaps.get_can
p_string_value IN VARCHAR2
RETURN VARCHAR2
IS
can_value VARCHAR2(9);
BEGIN
SELECT CC_ENT_CAN
INTO can_value
FROM CAN_SSN_CONVERTED
WHERE CC_ENT_PRIMARY_ID=p_string_value;
RETURN can_value;
EXCEPTION
WHEN NO_DATA_FOUND THEN
RETURN '810XXXXXX';
WHEN OTHERS THEN
RETURN 'ERROR-->' || SQLERRM;
END;
/

I removed the "WHEN OTHERS" clause per your suggestion. Now I'm getting this:
ORA-06564: object EXTERNAL_TABLE does not exist
ORA-06512: at "UGAPS.GET_CAN", line 9
06564. 00000 - "object %s does not exist"
*Cause: The named object could not be found. Either it does not exist
or you do not have permission to access it.
*Action: Create the object or get permission to access it.
The database is Oracle 11.1.0.7 for Windows 2008
The external table, function, and execution of that function are all within the same schema, which has DBA privileges, so I should have permissions. If I run the "SELECT" statement alone, it works properly.
Edited by: markr3 on Feb 19, 2010 2:48 PM

Text ID for text object MATERIAL does not exist - MM01

Hi All,
I am getting below error message when trying to save Material Master in MM01.
Text ID for text object MATERIAL does not exist
Message no. TD603
Diagnosis
You want to edit a text. However, the text ID (text type) of the specified text object does not exist.
Procedure
You can display a list of valid text IDs (text types) using F4=Possible entries. You can select the required text ID from this list with F2 or a double click.
The valid text objects are listed in table TTXOB. The valid text IDs (text types) for an object are specified in table TTXID.
I have searched the forums but couldn't get relevant message.
Please assist.
Thanks,
Raj

Hi Jurgen,
This is the complete message i am getting.
Text ID for text object MATERIAL does not exist
Message no. TD603
Diagnosis
You want to edit a text. However, the text ID (text type) of the specified text object does not exist.
Procedure
You can display a list of valid text IDs (text types) using F4=Possible entries. You can select the required text ID from this list with F2 or a double click.
The valid text objects are listed in table TTXOB. The valid text IDs (text types) for an object are specified in table TTXID.
If I enter MM02 and without changing anything if i save still i get this error message.
Thanks & Regards,
Raj

Text ID for text object BUT000 does not exist

Hi Experts.
I am doing data migration using LSMW with IDoc. I have this error message "Text ID for text object BUT000 does not exist" when processing the IDoc.
Can anyone tell me what is this error about and how could i fix it. A step by step guide would be nice. Really need advice urgently.
I'll definitely rewards points.
Regards,
Julianna

for this u need to maintain the text object and its related text id using the TC: SM31 in rel. view of ur tcode( like MM01, Va01 etc).
first get the view names(1 for text object and 2 for text id) from fun. people.
then go to sm31 with 1 view, create BUT000 .
then go to sm31 with 2 view, maintain text id for the text object:BUT000.

Sales Order Error Message 'Product does not exist in system'

Hi Gurus,
we recently upgraded from CRM 4 to 7.0. There is a ECC attached (which was also upgraded from 4.7 to 6.0 before).
Scenario: materials are replicatd from ECC to CRM. All mandatory customizing objects were initially loaded succesfully.
Because of the upgrade we already have "old" products in CRM. We requested a single product from ECC, the bdoc went through with green. The product can be found via commpr01 and also on database in comm_product. But when try to add the product to an sales order e.g. quotation, it gives the error message "product does not exist in the system.
We then tried to delete that product using the report com_product_delete_single. When entered the selection criteria for that report, we used the f4-valuehelp to enter the product. We found the product and then executed the report. But gives the message 'product not found'.
We also created a product for testing purposes directly in crm, but it shows the same behaviour in sales orders and for the deletion report.
Please help me with that issue. Your help will be highly appreciated!!!
Kind regards
Hannes

Solved with the help of SAP.
Keywords: COM_PRODUCT
COM_PRODUCT_GUID_GET_INTERNAL
CONVERSION_EXIT_PRID1_INPUT
CRM_ORDERADM_I 501
Relevant notes:
Note 1449146 - Dump While Creation IP via WebUI
Note 1445079 - Unable to add products to contract
The notes do not exactly described our issue but the code corrections were still relevent for us.

Transporting Process Chain - error Source system does not exist

Hi,
I tried to transport a local PC by itself (not including its main meta chain) since I have only done modifications in the local PC only. In the PC, there are PSA Processing, ODS Processing, ODS Activation, ABAP Program w/ variants and Infocube Rollup.
However, I got the following transport error: Source system does not exist
=======
Diagnosis
Source system is not known.
System Response
The imported data for DataSource was deleted again because the referenced source system does not exist and no mapping is defined in table RSLOGSYSMAP on an existing productive source system.
Procedure
Create the referenced source system in the Data Warehousing Workbench or define mapping to a known source system in table RSLOGSYSMAP.
You get to maintenance using Tools -> Conversion of the logical system names.
============
I have checked at the table RSLOGSYSMAP and all source system mappings are in order.
And the weird thing is, upon checking the PC itself in the transport-to box, I can activate it without any error.
FYI, we are currently upgrading to BI Accelerator. Am not sure if this could be one of the reasons.
Any inputs and tips are highly appreciated and will be rewarded with points accordingly.
Thanks

Hi,
This error is due to the fact that the
mapping table for the after import (RSLOGSYSMAP) is not correct maintained in PB7 system.
You need to maintain table RSLOGSYSMAP in each system
You can find the steps to do it in the attached note 127326:
o Maintain table 'RSLOGSYSMAP' in the target BW with view
   'V_RSLOGSYSMAP' and enter as 'original source system' the logical name of the source system in the source BW and as 'target source system' the logical name of the source system in the target BW.
   This maintenance is required since it allows the correct source system reference of the InfoSources to be transported.
This source system reference in turn is absolutely necessary to activate the transfer structure.
   Example:
   Source BW with source system AAA.
   Target BW with source system BBB where the source system AAA
   corresponds to the source system BBB.
   Entry in RSLOGSYSMAP in the target BW:
   Original source system: AAA, target source system: BBB.
   Give the DDIC user in the source BW in client 000 the
   authorization profile S_RS_ALL to create BW objects.
Cheers
Rajesh

Number range for object MDTB does not exist - Message no. 61501

Hi All ,
I have done the necessary configurations in PP say
Order Type
Order Type Dependent Parameters
Scheduling parameters for planned & production order
Confirmation parameters
Availabilty check etc
and iam able to create planned & production order and confirma the production order.
I want to configure for MRP: -
Settings done are
Have activeted planning file entry for all plants.
When i run MRP system throws a error <b>Number range for object MDTB does not exist - Message no.61501 </b>
Is there anything to do with plant parameters OPPQ and Mrp Group OPPR.
I just tried plant parameters,standard 0001 is not available for copying.
Suggest me how to proceed to set MRP.
Shankar

Hi shankar
it is a good practice while creating the plant copying the plant from the standard plant so that all the standard table enteries will be copied for the plant as the standard plant is not there youcan think of copying from any other plant similar to your plant which has the required entry. else
in SE16N check the NRIV table for the Object MDTB. if enteris found then make the table entry with the help of abaper.
hope this helps
regards
SK

ORA-34492: Analytic workspace object __XML_GET_FULLTOAW_NAME does not exist

Hi,
We are experiencing the following error when trying to retrieve data from the OLAP layer in our front-end:
ORA-34492: Analytic workspace object __XML_GET_FULLTOAW_NAME does not exist.
to be more specific, the following happens:
We are using the Oracle OLAP Java api's to query the analytical workspace. We create a Source object that contains the joins we want. This source is prepared and committed via the TransactionProvider class. Via the DataProvider we then create an SQLCursorManager and generate the SQL and execute it via JDBC.
We were able to execute it without problems on an XP development platform. When switching to another platform that we use, it gives the following error messages:
(platform with the error is Linux x86-64; more version info further down)
Caused by: java.sql.SQLException: ORA-34492: Analytic workspace object __XML_GET_FULLTOAW_NAME does not exist.
ORA-06512: at "SYS.OLAPIMPL_T", line 23
ORA-06512: at "SYS.OLAPIMPL_T", line 17
ORA-06512: at line 4
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:305)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:272)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:626)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:113)
at oracle.jdbc.driver.T4CStatement.execute_for_describe(T4CStatement.java:352)
at oracle.jdbc.driver.OracleStatement.execute_maybe_describe(OracleStatement.java:894)
at oracle.jdbc.driver.T4CStatement.execute_maybe_describe(T4CStatement.java:384)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:984)
at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1124)
Platform/version info that produces the error:
Linux x86-64
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for Linux: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
OLAP A patch for 10.2.0.3 is applied.
Platform where this works without problems:
Windows XP
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Any info on resolving this issue is greatly appreciated!
Thanks,
Ed

Hi Keith,
Yesterday I actually fully rebuilt/redeployed the AW. (I only patched our 10.2.0.3 installation with the OLAP A patch very recently.) Even the AW's tablespace was recreated, just to make sure everything was gone. Redeployment of the OLAP objects from OWB control center went without any problems.
Let me answer your questions one by one below.
1) How did you build the AW?
We use OWB. The only thing I used AWM for is to actually create the AW. Once created, I use OWB to design and deploy. The front-end developers use AWM sometimes for viewing data in the OLAP objects. (I use OWB or AWM for that.)
2) Can you connect to the AW via AWM, if so can you use the Data Viewer option to view:
a) each dimension and check you can drill up and down.
b) each cube
I have been playing around a bit with the dim's and cubes in the AWM by right-clicking and selecting view data ... (that's the data viewer option?) and encountered no problems.
3) You are using the OLAP API directly, what sort of application are you building - Java Client, JSP, Applet and are you using BI Beans?
We are building a JSP type application, but so far only servlet code is being executed as the failure occurs on issuing the query. We are not using BI BEans.
Thanks for your feedback!
grts,
Ed

Error "Service EMPLOYEE_ORGCHART_SERVICE does not exist." in ESS.

We are on mySAP ERP 2004, and using ESS 60.2 version.
In the "Employee search" workset when I search for an employee it displays his last name, first name, positon, org unit, job, and some other stuff....Every thing is working great except for.........in the results that are dispalyed when a search is performed, I click on the orgunit that a particular employee belongs to, and its throwing me the following error
"Service EMPLOYEE_ORGCHART_SERVICE does not exist".
Has anyone come across this?
Any suggestions on how to fix this is highly appreciated with points.

Hello John,
The links in SAP ESS Applications are built at runtime. The configuration for these links and the complete ESS/MSS Menu has been provided in the IMG in the backend(For ERP 2004). I do not remember the IMG Path. But yes you need to maintain the entries for Orgchart in the following views. Most probably they will be missing.
Check if there is an entry in the following view V_T7XSSSERSRV in your backend client.
Service Short Key - EMPLOYEE_ORGCHART_SERVICE
If its not there then you need to create one entry like this:
Service Link Text    Orgchart
Service Type         WebDynpro application
Link Resource       EMPLOYEE_ORGCHART_SERVICE
Then goto view V_T7XSSSERRES and check if there is a Resource Object Key as EMPLOYEE_ORGCHART_SERVICE.
This entry will have following details if its exists(else create with following details):
Resource Key         EMPLOYEE_ORGCHART_SERVICE
Description     Orgchart
Server
Directory Path sap.com/ess~org
Object Name     Orgchart
URL Parameter
Window Name          Orgchart
Window Properties
URL for PCD Page:
ROLES://portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.pages/com.sap.pct.erp.ess.employee_search/com.sap.pct.erp.ess.orgchart
After maintaining these entries it should work.
Regards,
Shubham

Error "Function G1 does not exist "

Hi ,
While doing monitoring got error " Function G1 does not exist ".
Bdoc type : BUPA_REL
Sate : E04.
Checked SMQ1,SMQ2 , no queues were in sysfail status.How to maintain this function.
Help me how to clear .
Thanks in advance, Regards,
PA.

Hi ,
May be your customization settings was not replicated correctly.
In R/3 you have Contact person function G1 and it doesn't exist in CRM.
You can check it : go to BP trn => open an organisation that has contact person =>relationship tab => double click on contact person => In "Contact person data "frame you will see field "function" => press F4 and check existing values.
Those values should be same as in R/3 system.If not - check your customization objects synchronization.
Hope, it's help
Rika

ORA-04043: object Table_Name does not exist

Can any one tell me if this is a known bug or am I doing something stupid?
STEPS:
1 - I create a table under user1 ID (user1 table space)
2 - I describe the table and it exist (describe Analyte)
PKANALYTEKEY NOT NULL NUMBER(38)
ANALYTENAME VARCHAR2(64)
ANALYTEABBREVIATION VARCHAR2(20)
ANALYTESTATUSCODE VARCHAR2(20)
STANDARDOPERATINGPROCEDURE NUMBER(38)
UOFM VARCHAR2(15)
ROWSTATUS NOT NULL CHAR(1)
CREATIONDATE DATE
MODIFICATIONDATE NOT NULL DATE
RECTIMESTAMP TIMESTAMP
2 - I grant all privileges on this table to user2 (Successfully granted)
3 - I log into SQLSheet using user2
4 - Try the Describe on the table and get "ORA-04043: object <Table_Name> does not exist" Error.
Any help will be greatly appreciated.
Regards,
Kumar.

You need to qualify the table name with the schema.
desc user1.analyte

Release strategy: Tx CL20N Error: Entry 01 does not exist in table T16FS

Dear MM Gurus,
I was designing new release strategy for PR and PO, so I deleted all the previous entries(SPRO) available in SAP. I created my new entries but in the transaction CL20N I got the above mentioned error: "Entry 01 does not exist in table T16FS-Check your entry" . I checked the table T16FS, where the entries were available. It also showed the previous entries I deleted from SPRO.
Refering the SAP note 365604 (version 29, valid from 08.10.2008), I created the deleted entries again so that I could delete them in the required sequence
1. release strategies
2. release indicators
3. release codes
4. release groups
5. class
After deleting the entries in the above mentioned sequence also I am getting the same error in CL20N.
I ran report RCCLZUOB, it shows the entries does not exist.
Please help.
Edited by: Akshay Kurhe on Mar 2, 2009 6:02 AM

hi
check this setting
Distribution Using Object Classes -->Maintain Class Types & Maintain Classes

Error: Object "Dot11BandSelect" does not exist.

Similar Messages

Maybe you are looking for