Error: Object type '' could not be generated when creating sales order

Hello Friends,
I am using a SAP standard ITS service to create sales order.
When I am creatin SO, it gives me error Object type '' could not be generated.
Can you plz suggest me what is that issue & how I can reslove it.
Regards,
Narendra

any inputs around this plz??

Similar Messages

  • Condition Values not being copied when creating sales order with reference

    hi experts
    i am copy a sales order with reference in va01 , when i copy the order it status is shown as incomplete beacue the condition values in some condition type sis zero, whereas if i delete amount for some condition type and re-eneter it the condition values for all conditon types appears ...
    in all after copying order i go to condition at item level some codition values are zero but if erase amount for any condition type and then re enter it value comes for all condition types

    Hi Sunny,
    Maintain some value against that condition type in VK11.
    This must solve your question. Please set to resolved if it solves your doubt.
    Regards
    Abhii....

  • BPM Error:Runtime handle of object type could not be created:CX_MERGE_SPLIT

    HI Guys...
    I am working on a RFC to HTTP scenario:
    It is a standard SAP interface ....so we created only ID objects..obviously the BPM delivered by must be correct.
    in sxmb_moni_bpe  it is throwing th following error texts:
    Runtime handle of object type could not be created
    Error executing service for node
    Exception CX_MERGE_SPLIT occured
    component mapping has returned an error
    unmodeled exception when executing service for node
    No payload found
    object FLOWITEM method EXECUTE cannot be executed
    I tested the mapping payload from sxmb_moni in IR and it is working fine.
    Receiver is an HTTP so could not able to find exactly whats happening as no thrid party tools can be installed....struck up here.
    Any iputs will be of help in this area.
    Thanx in adavance.
    Kiran

    any inputs around this plz??

  • IDoc Error -Instance of object type could not be changed

    Hi All
    I am getting IDoc failed with the error massaeg "Instance of object type could not be changed"
    Message type :PORDCR
    Basic type : PORDCR05
    Message no. BAPI003
    Status : 51
    Please suggest on this
    Thanks
    Ajit

    Hi Madhu
    All these POs are uploaded during the Cutover Activities only, I am not sure whether it is uploaded through LSMW or not. What I guess is If its uploaded thrugh LSMW , then we can't change any value in the PO.
    Please sugest how can I process allthese IDocs.
    Thanks
    Ajit

  • IDoc failed with the error massaeg "Instance of object type could not be ch

    Hi All
    I am getting IDoc failed with the error massaeg "Instance of object type could not be changed"
    Message type :PORDCR
    Basic type : PORDCR05
    Message no. BAPI003
    Status : 51
    All POs are get uploaded in SAP during Cut over activities only.
    Please suggest on this.It will be a great help.
    Thanks
    Ajit

    Hi
    After uploading POs into SAP we are changing quantity and value in PO in Legacy system, and for this all IDocs are failed, subsequently these changes are not triggering to ECC.
    Please help
    Thanks
    Ajit

  • Error: "Transaction type could not be determined" during PO Creation fromSC

    Hi all,
    I'm working on SRM 5.5 with ECS.
    During the creation of  a PO  I want to add a SC as an item of PO.
    But when I chose the SC and click on the button Add to PO I recive the error:
    Transaction type could not be determined
    In the organizational unit I set the attribute BSA and DP_PROCT_TY.
    there are other steps I have to do to join the transaction type of SC and PO?
    rgs
    enzo

    Hi Enzo,
    First check if the attribute BSA and DP_PROC_TY have the same value.
    Then in the attribute value for BSA, change the source system for the document type to your SRM system.
    Create a new PO and a shopping cart.
    Try changing the PO by adding the shopping cart
    Hopefully your problem may get resolved.
    Thanks
    Sanjeev

  • Getting error when creat sales order and Stock Posting

    Hi
    I have created enterprise structure, xd01, mm01, ovkk but I count't post stock.
    When create sales order getting error is that
    1.This material is not defined for sales area 1000, 10, 00.
    And if i use this T.Code MB1C,
    2. Parameters for plant 1000 not maintained in Inventory Mgt.,
    *3. Unit *** is not created in language EN.*
    Thanks in advance

    Dear selvi sankaran
    1)  Compare the sales organization, distribution channel and division of customer and material.  In your case, either of that should have been created differently.  Maintain the same sales area and retry
    2)  Go to omi8 and maintain the required parameters to your plant
    3)  Go to Material Master, select "Additional data" and click on "Descriptions".  There maintain "EN" under language.
    thanks
    G. Lakshmipathi

  • Run Time Error in e-commerce crm 5.0 when creating new order

    Hi all,
    I am getting Run Time Error in e-commerce crm 5.0 when creating new order, shopping basket is comming , but while creating order , getting run time error.
    Thanks,
    Nagesh

    Hi nagesh,
    Are you able to resolve the issue. Please let me know the solution.
    I had started a thread with a same problem but in ERP E-commerce.  Points will be rewarded if you provide the solution in the thread below
    Re: Run Time Error in e-commerce crm 5.0 when creating new order
    Thank You
    Ram

  • To Blank out system default requested delivery date when create Sales Order

    Hi Experts,
    I am facing a problem when create Sales Order doc copy with reference to a contract.
    The create with reference screen under the Contract tab, SAP default with current date as the Requested delivery date.
    Is there any way to blank out this default as I need to use the requested delivery data in the contract doc ?
    Many Thanks.
    Regards,
    Xavier

    Hi,
    Try this--
    While defining the Contract sales docment type in VOV8,  uncheck the proposed delivery date field in  the tab Requested delivery date/ reqested pricing date/reqested prchase order date
    I will not propose the system date and leaves the field blank
    you can enter  the required delivery date.
    Hope this will work
    regards,
    santosh

  • How to save LIST_LINE_ID of Price List when create Sales Order Line

    I dont know how save the LIST_LINE_ID of the Price List on Sales Order or anywhere when create Sales Order Line.
    I create with the following steps:
    Step 1: Create Price List for Item A with two line: Line 1 (Unit Price = 10,5, Pricing Attribute with Tax Classification Code = 5%), Line 2 (Unit Price = 11, Pricing Attribute with Tax Classification Code = 10%)
    Step 2: I create Sales Order Line with Item A, Tax Classification Code = 5% --> Unit Selling Price = List Price = 10,5 but dont bookorder
    Step 3: I update the Unit Price of Line 1 into 11.55.
    Step4 : I book this Sales Order. Howerver, I use form personalization to customize Book Event: if the Unit Price of Item on Price List > Unit Selling Price then cant not Book. But I dont konw List Price of Sales Order belong the line of Price List.
    Please help me check this issue. Thanks for your supports.
    BinhTC
    Email: [email protected]

    Bob's right - except that if you have OM: List Price Override Privilege set to 'Unlimited' (and from your scenario it sounds as if you have) it is possible that the value in unit_list_price will vary from what was originally retrieved from the price list.
    In that case, a safer bet is to use :LINE.original_list_price in your personalization as this will always contain what was originally retrieved and will mean you can avoid any repeat lookup via list_line_id.
    Regards,
    Jon

  • User Exit/Badi to change the billing plan date when create sale order

    Experts,
    Please advise which user exit/badi can be used to change the billing plan date wen create sale order.
    My requriement is based on some rules to dynamically change the line item billing plan start date and end date when create sales order.
    I tried some user eixt in MV45AFZZ, but the date got revert to the orginal date from billing plan.

    Hi,
      check the include MV45AFZB.
    Thanks & Regards,
    Sateesh.

  • Error : "Your purchase could not be complete" when gift app :(

    Hello , can you fix this problem for my account . I'm gifting app for my friends but i can't complete . It show me error : "Your purchase could not be complete" .Thank for your support

    Contact iTunes support at the link below.
    https://ssl.apple.com/emea/support/itunes/contact.html

  • Known Issue: "DNS server could not be reached" when creating or updating a RemoteApp collection using template images for some locales

    When trying to create or update Azure RemoteApp collections that use a template image for some non-EN-US locales, it might fail with error "DNS server could not be reached". You might also see error code "DnsNotReachable". 

    Cause:  There was a issue in Azure in which decimal punctuation was not treated properly if the locale of the template image used a comma (,) instead of a period (.).
    Workaround:  Before a fix was applied, the workaround was to use template images based on a locale that uses a period to delimit decimals, such as EN-US.
    Resolution:  As of March 19, 2015, a fix for this issue has been applied to Azure. You should once again be able to create collections from template images that use non-EN-US locales. If you continue to have this problem, please
    try the workaround. If that works and the only difference in the template images is the locale, please email remoteappforum (at Microsoft). If the workaround does not work, the issue is likely caused by a DNS configuration issue such as:
    No valid forwarders to public DNS servers configured on your internal DNS server(s).
    A valid internal DNS server is not specified on your Azure RemoteApp VNet.
    A VNet or internal network configuration issue is preventing the internal DNS servers from be reached by the VMs in the RemoteApp collection.

  • Getting Error when creating sales order

    Hello expert,
    When i ma creating sales order In productive environment, not getting any error.
    While creating sales order in Quality system The Error is"Order Type ZSOS has not defined in sales area 0201,02.00.
    I checked customizing and both the system Quality and Productive system having following configuration and that is identical.
    Combine sales Org
    Sales Org                              Ref Sales org
    0201                                        Blank
    Combine Distribution Channel
    Sales Org                 D.Channel            Ref dist Channel
    0201                            02                            02
    Combine Division
    Sales org             Division            Ref Divison
    0201                      10                      00
    Assign permitted order type to he sales areas.
    Ref Sales org         Ref Distribution              Ref Division   Sales doc type
    0201                        02                                   00                     ZSOS
    Please can anyone assist me where we are missing.
    Regards
    Ajit jaiswal

    Hi Ajit,
    you have to make these assignments in img
    Combine sales organizations(ova0)
    Combine distribution channels(ovam)
    Combine divisions(ovan)
    Assign sales order types permitted for sales areas(ovaz)
    after these assignments the mentionwed error will be resolved
    Revert if helpful
    Mohit Singh

  • Dump Error when creating sales order

    Dear Friends,
    When I am creating sales order after entering order quantity field value in item table giving dump error.
    INCLUDE LV03VF0B.
    INCLUDE LV03VFB4 inside below code trigger error.
    PERFORM VVBBD_AUFBAUEN USING WA_AVBBD
                                        WA_AVBBD-APOMOBILE
                                        DA_SUBRC
                                        DA_UPDKZ
                                        DA_VVBBD_TABIX
                                        0.

    Hello Praveen,
    checked this program in other systems.
    The weird thing in your code is the final parameter 0, it should not be there.
    The call should be:
    PERFORM VVBBD_AUFBAUEN USING WA_AVBBD
                                        WA_AVBBD-APOMOBILE
                                        DA_SUBRC
                                        DA_UPDKZ
                                        DA_VVBBD_TABIX.
    Hope it helps.

Maybe you are looking for