Error occoured while runnin t-code VA01

Hello,
When i'm going to run the t-code VA01 this unknown program error is going to occoured.
I send that error attchment please help me for solving this error.

hi siddarth..
you got dump..not error...
and you got this because of VBAP table....i think there is a APPEND structure in VBAP table because of which the VBAP table is partly activated...
so.go to VBAP table and click on APPEND structure...then u will be provided with all APPEND structures...delete corresponding structure which contains that field 'ZZDEA_LICENSE'..
now activate the VBAP table....(optional--better go to SE14(Data base utility)--enter table VBAP...activate it)....
VA01--will be opened...

Similar Messages

Internal error Occoured while posting A/P Invoice

Hi Experts,
While posting A/P Invoice. I am getting the following error message and I am unable to add the document.
"Internal Error (512) Occoured [Message 131-183]
Please do the needfull.
Thanks & Regards,
Srikanth.

Hi......
Please drop all the FMS and SPs applied at AP Invoice Form and then try to add......
Hope this will solve the problem....
If problem with FMS then you need to re create....
Regards,
Rahul

Error coming while opening T.code CIC0

Hi friends,
while opeining the CIC0 T.code system showing the below error pls suggest me how to rectify it
"error when determining the-- "CONTACT_SEARCH_CONFIGURATION profile for agent "
Regards
Ramakrishna

Hi Ram,
In this case, could you please let me know the complete Component Configuration of your CIC Profile and also the components of the Framework Id which you make use of ?
Please also check in your Framework ID -> Visible Components, whether you have maintained any Component Container ?
Thanks & Best Regards,
Vinod

'an error occoured while restoring your iphone (-50) = any help?

(-50) Just had this error message when syncing iphone and now lost everything - please help?

I feel your pain. Yesterday I installed the latest iTunes to update my iPhone 4, didn't sync before updating, my fault there as a novice Apple user. But even before you confirm the update it tells you it will back up all your photos, contacts, etc and put it back on after the new iOS is in. So the iOS 5 update installed fine, but I got the same (-50) error. After trying all the prescribed troubleshoots from Apple's site, I got an Apple Advisor on the phone after a 30 min wait. Ultimately the Advisor directed me to Edit>>Preferences>>Devices (on Windows) and said there should be at least one backup file listed. However, there was no such file. So essentially, Apple's own update process screwed up by not creating a backup to restore my photos, contacts, everything. Once it was apparent there was nothing that could be done, the Apple Advisor was quick and eager to encourage me to use iCloud in the future, which comes with a nice annual fee for anything over 5 GB of storage, which is nothing in this day and age. At least with iOS 5 they will be doing over-the-air updates now instead of this absurd risk-your-digital-life method of wiping your phone for a simple software update.

RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack

Hi Experts,
I am performing Cloning for Oracle Application R12 with rapid clone and adcfgclone dbTier is failing with the below error.
RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack
Both my source and target system are on the same server. I am using dbTier option because I have cold backup available from the source system.
DB Version: 11.2.0.3
EBS version: 12.1.3
OS Version: RHEL6, 64 bit
cat /data/db_top/db/tech_st/11.2.0/appsutil/log/TEST_oracleupk/ApplyDBTier_07050816.log
Log file contents:-
AutoConfig could not successfully execute the following scripts:
    Directory: /data/db_top/db/tech_st/11.2.0/perl/bin/perl -I /data/db_top/db/tech_st/11.2.0/perl/lib/5.8.3 -I /data/db_top/db/tech_st/11.2.0/perl/lib/site_perl/5.8.3 -I /data/db_top/db/tech_st/11.2.0/appsutil/perl /data/db_top/db/tech_st/11.2.0/appsutil/clone
      ouicli.pl               INSTE8_APPLY       255
AutoConfig is exiting with status 1
RC-50013: Fatal: Instantiate driver did not complete successfully.
/data/db_top/db/tech_st/11.2.0/appsutil/driver/regclone.drv
cat $[target_oracle_home]/ appsutil/ log/$CONTEXT_NAME/make_[timeStamp].log
Error found while relinking
return code = .58
I have already checked these MOS Notes
OUICLI.PL Fails While Running Adcfgclone On Oracle EBS R12 If Global Inventory Does Not Exist [ID 458653.1]
RC-00110 Error While Running adlnkoh.sh [ID 330469.1]
But none has worked in my case. Please let me know what I'm missing here.
Thanks,
Ankur

Hi Hussein,
Following the workaround provided in this MOS Note ID has solved my issue.
Rapid Clone On Dbtier Fails "RC-50013: Fatal: Instantiate Driver Did Not Complete Successfully" [ID 1352116.1]
But now "adcfgclone.pl appsTier" is failing with the below error.
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
      <filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
    Directory: /data/appl_top/inst/apps/TEST_oracleupk/admin/install
      adgendbc.sh             INSTE8_SETUP       1
      afcpnode.sh             INSTE8_SETUP       1
      afgcsreg.sh             INSTE8_SETUP       1
      txkWfClone.sh           INSTALL_SETUP      1
[PROFILE PHASE]
AutoConfig could not successfully execute the following scripts:
    Directory: /data/appl_top/apps/tech_st/10.1.3/perl/bin/perl -I /data/appl_top/apps/tech_st/10.1.3/perl/lib/5.8.3 -I /data/appl_top/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3 -I /data/appl_top/apps/apps_st/appl/au/12.0.0/perl -I /data/appl_top/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi /data/appl_top/inst/apps/TEST_oracleupk/admin/scripts/adexecsql.pl sqlfile=/data/appl_top/inst/apps/TEST_oracleupk/admin/install
      afwebprf.sql            INSTE8_PRF         1
      amscmprf.sql            INSTE8_PRF         1
      amswebprf.sql           INSTE8_PRF         1
      bisadmprf.sql           INSTE8_PRF         1
      bisdblrp.sql            INSTE8_PRF         1
      clnadmprf.sql           INSTE8_PRF         1
      cncmprf.sql             INSTE8_PRF         1
      cseadmprf.sql           INSTE8_PRF         1
      csfadmprf.sql           INSTE8_PRF         1
csiadmprf.sql
INSTE8_PRF
1
eamadmprf.sql
INSTE8_PRF
1
fteadmprf.sql
INSTE8_PRF
1
icxwebprf.sql
INSTE8_PRF
1
oksfrmprf.sql
INSTE8_PRF
1
wshadmprf.sql
INSTE8_PRF
1
Directory: /data/appl_top/inst/apps/TEST_oracleupk/admin/install
adadmprf.sh
INSTE8_PRF
1
admk80ln.sh
INSTALL_PRF
1
afadmprf.sh
INSTE8_PRF
1
afcpctx.sh
INSTE8_PRF
1
afcpgsm.sh
INSTE8_PRF
1
ibywebprf.sh
INSTE8_PRF
1
igccmprf.sh
INSTE8_PRF
1
jtfictx.sh
INSTE8_PRF
1
okladmprf.sh
INSTE8_PRF
1
txkJavaMailerCfg.sh
INSTE8_PRF
1
txkWebServicescfg.sh
INSTE8_PRF
1
[APPLY PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /data/appl_top/apps/tech_st/10.1.3/perl/bin/perl -I /data/appl_top/apps/tech_st/10.1.3/perl/lib/5.8.3 -I /data/appl_top/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3 -I /data/appl_top/apps/apps_st/appl/au/12.0.0/perl -I /data/appl_top/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi /data/appl_top/inst/apps/TEST_oracleupk/admin/install
adadmat.pl
INSTE8_APPLY
1
AutoConfig is exiting with status 31
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyApplTop
ERROR: AutoConfig completed with errors. Check logfile at /data/appl_top/inst/apps/TEST_oracleupk/admin/log/ApplyAppsTier_07080320.log for details.
ApplyApplTop Completed Successfully.
# Checking the status of AutoConfig run of ApplyApplTop
Warning : AutoConfig has completed with errors .
Thanks,
Ankur

IOS5 Update - An error occurred while restoring this iPad (-1)

Hi,
I'm trying to upgrade my iPhones and iPad. My iPhone 4 update went well, but I can't get my iPad to restore afer upgrade. I keep getting the iTunes message "An error occoured while restoring this iPad (-1)". This happens after the restore is about half done. I did retry a few times, but without success.
After confirming the first error iTunes shows "iTunes was interruped while restoring the content of the iPad "...". Would you like to restore this iPad again now?" and is offering to restart or to delete the backup.
The iPad still boots up and does not seem bricked, but I fear all apps and other data is gone. However, I did do a successful "transfer all purchases" just before the iOS update and i have backups of my musik and pictures.
Does anyone know whats going on and how to resolve this without late surprises?
Thanks in advance.
Regards,
Gerhard

I HAVE THE SAME PROBLEM!
But my iPad is completely bricked. I had previously updated my iPhone 4.
I went to the Apple Store last night and they informed me that the firmware in the update might have affected the hardware. Being that my warranty had run out 100 days ago they couldn't help me. I couldn't believe they were telling me this. Naturally if I had known the update would have destroyed my iPad, I wouldn't have installed it.
I think they are handling this update on older iPads awfully.

Error Message while ship to party is not assigned to sold to party in VA01

Hi All,
In VA01, i need to throw an error message while giving a ship to party, which is not assigned to sold to party.
I tried in EXIT_SAPLV09A_001
              EXIT_SAPLV09A_002
              EXIT_SAPLV09A_003
              EXIT_SAPLV09A_004
above user exits, but i couldnt find the solution.
if possible provide with the code.
i appericiate the early response.
Regards,
Kumar.

User exit MV45AFZB, form-routine USEREXIT_CHECK_VBAK.

SSRS Report Manager error "Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"

Hi All,
I am getting error "Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"
in one of my Test Environment when trying to run the SSRS 2012 report from report manager.
Any clue why it is happening.
Thanks Shiven:) If Answer is Helpful, Please Vote

Hi All,
Upon investigation found that there was no space (0 Byte is available) in E drive where underlying SQL DB is residing.
Once I cleared the space, report started working and above error was not displaying.
Thanks Shiven:) If Answer is Helpful, Please Vote

While doing MIRO i am getting an error: Enter a tax jurisdiction code

Hi,
While doing a MIRO, i am getting an error :
Enter a tax jurisdiction code
Message no. M8757
How to Resolve
Pratik

Hi
Try this
1.To enter the tax amounts of the G/L account items, choose Extras ® Tax amounts. The Tax Amounts screen appears.
You can branch to this screen at any point during document entry.
The Tax Amounts screen shows the tax amount, tax code, posting key, tax base amount, and jurisdiction code for all the items already entered. When you call up this screen after entering the G/L account items, it displays the amounts that have already been entered.
2.You can now choose how you want to enter the taxes.
The tax jurisdiction codes represent the different taxing authorities to which you submit payment for taxes EG: the state, county, city etc.
In SAP you can have as many as 4 levels. Configuration is done in 2 steps :
First step :
The tax jurisdiction structure (structure of the tax code) is set up with following menu path :
IMG >Financial accounting> Fi Accounting basic settings> tax on sales/purchases > basic settings > specify structure for tax jurisdiction code.
Alternatively you can use t-code OBCO
This step allows you the enter the character length of your various level of hierarchy within your tax jurisdiction code structure (State 2 char, county 3, city 4, etc...).
Second step:
You configure the tax jurisdiction code using the structure defined earlier, menu path :
IMG >Financial accounting> Fi Accounting basic settings> tax on sales/purchases > basic settings > define tax jurisdiction codes.
Alternatively t-code OBCP
Define your tax jurisdiction codes, EG GA0000000 for Georgia, GA001000 for Georgia, douglas county, GA001001 for georgia, douglas county, city of lithia springs.

Error while running the code using jvm but its working fine with eclipse3.0

Hi Everyone,
I have a problem while building xml document.
I have developed my java files using IBM Eclipse 3.0 and i had no problem while executing the files.
But while i am trying to execute the same code in jdk/bin, xml document is not working..
No error encountered while compiling but while executing when i try to print the xml string it just gives the root element name like [root : null]
Can anyone suggest some solution?Its urgent please....

since i didnt get any reply when i posted it at http://forum.java.sun.com/thread.jspa?threadID=723865
i have posted my pbm in the forum.
Anyways i never got a reply back for neither of my posts.

Error while deploying WDJ code

Hi All,
I am getting the following error while deploying WDJ code in NWDS .
1 . The project was not built due to classpath errors (incomplete or involved in cycle).
2 . Missing required library: 'com.sap.security.api.jar'.
I have put the jar file into the project path but still then i am getting these errors . Please help .
Thanks in advance,

Hi,
If u are using simple project then then adding jar into application property would do but if using DC then u must follow below procedure.
You cant just add any external jar file into a DC project.
There is only one way to add a external jar file is by using external library project.
1.create an external library project type DC.
2. put your external jar file into its lib folder.
3. create its public part of type SDA( Assembly if using CE)...and API( Compilation if using CE).
4. just use SDA public part into your webdynpro project as used DC.
5. and when you deploy your webdynpro project on server, this file will also get deployed... remember to use SDA public part..
Regards
Surender Dahiya

Error while deploying BPEL code to the server in 11g

Hi all,
I am trying to deploy bpel process in 11g. I have followed the doc for migration from 10g to 11g http://download.oracle.com/docs/cd/E12839_01/upgrade.1111/e10127/upgrade_soa_apps.htm#CHDCHCEB .
But still could not deploy successfully. It is compiling successfully but while deploying the code facing the below issue
[07:06:28 AM] Error deploying archive sca_Invoice_B2B_rev1.0.jar to partition "default" on server soa_server1 [148.87.197.163:45713]
[07:06:28 AM] HTTP error code returned [500]
[07:06:28 AM] Error message from server:
Error during deployment: Deployment Failed: Unable to find a WSDL that has a definition for service {http://xmlns.oracle.com/Invoice_B2B}Invoice_B2B and port Invoice_B2B. Please make sure that the port attribute for the binding defined in the composite file is correct by checking the namespace, service name, and port name. In addition, check that the WSDL associated with the binding namespace is imported and currently reachable (check the import nodes at the top of the composite file). Finally, validate the HTTP proxy settings for the server..
[07:06:28 AM] Check server log for more details.
[07:06:28 AM] Error deploying archive sca_Invoice_B2B_rev1.0.jar to partition "default" on server soa_server1 [148.87.197.163:45713]
[07:06:28 AM] #### Deployment incomplete. ####
[07:06:28 AM] Error deploying archive file:/E:/Shared/jDev11113/v11113.24D/Invoice_B2B/deploy/sca_Invoice_B2B_rev1.0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
Can anyone let me know whether i am missing anything? also can anyone let me know some of the steps that need to be looked upon while migration.
Thanks in advance

Hi all,
This is the underlying error that i found in the logs
"Cause=null schema location for ns=http://xmlns.oracle.com/pcbpel/adapter/db/top/DB_ERROR]
Check the XML schema and make sure your query string is valid"
2011-02-02T03:22:29.066-07:00] [soa_server1] [ERROR] [] [oracle.soa.bpel.engine.compiler] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: ohsadmin] [ecid: 0000Ir_tGToCom55zR0FyW1DIIY6000008,0:1] [APP: soa-infra] [dcid: 49c8ed318246db94:-5a93ef1d:12d7abb4670:-7ffd-00000000000252fb] <BPEL1Processor::generateProcessClass> Response_B2B.bpel(line 29): unresolved element[[
XML element "{http://xmlns.oracle.com/pcbpel/adapter/aq/Invoice_RosettaNet-V02.00/}Header" of variable "Header_Var" is not defined
Make sure the XML element "{http://xmlns.oracle.com/pcbpel/adapter/aq/Invoice_RosettaNet-V02.00/}Header" is defined in one of WSDLs that are referenced by the deployment descriptor
[2011-02-02T03:22:29.067-07:00] [soa_server1] [ERROR] [] [oracle.soa.bpel.engine.compiler] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: ohsadmin] [ecid: 0000Ir_tGToCom55zR0FyW1DIIY6000008,0:1] [APP: soa-infra] [dcid: 49c8ed318246db94:-5a93ef1d:12d7abb4670:-7ffd-00000000000252fb] <BPEL1Processor::generateProcessClass> Response_B2B.bpel(line 234): unresolved part element[[
part "Invoice" of variable "Receive_Response_InputVariable" is defined as XML element "{http://www.api.org/pidXML/v1.0}Invoice" whose definition cannot be resolved because "java.lang.IllegalArgumentException: null schema location for ns=http://www.api.org/pidXML/v1.0 [Cause=null schema location for ns=http://www.api.org/pidXML/v1.0]".
Make sure the XML element "{http://www.api.org/pidXML/v1.0}Invoice" is defined in one of the XML schemas
[2011-02-02T03:22:29.067-07:00] [soa_server1] [ERROR] [] [oracle.soa.bpel.engine.compiler] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: ohsadmin] [ecid: 0000Ir_tGToCom55zR0FyW1DIIY6000008,0:1] [APP: soa-infra] [dcid: 49c8ed318246db94:-5a93ef1d:12d7abb4670:-7ffd-00000000000252fb] <BPEL1Processor::generateProcessClass> Response_B2B.bpel(line 340): invalid query[[
query "/ns10:XxexhBpelErrorLogCollection/ns10:XxexhBpelErrorLog/ns10:invoiceNumber" is invalid, because java.lang.IllegalArgumentException: null schema location for ns=http://xmlns.oracle.com/pcbpel/adapter/db/top/DB_ERROR [Cause=null schema location for ns=http://xmlns.oracle.com/pcbpel/adapter/db/top/DB_ERROR]
Check the XML schema and make sure your query string is valid
Can anyone let me know what could be the reason?
Thanks in advance

An Error Occurred During Report Processing - Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 12019

When I run the report on production I got the following error message:
Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the
request on the server. The status code returned from the server was: 12019
It hasn’t happen on Dev and Test before.
I googled, The error is described as:
12019 ERROR_INTERNET_INCORRECT_HANDLE_STATE
The requested operation cannot be carried out because the
handle supplied is not in the correct state.
But I cannot find the solution for that.
Has it happend to you before? How to solve that?

Same behaviour here, Sharepoint 2013 with SSRS in integrated mode
Error: Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status
code returned from the server was: 12019

Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a reso

Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a resolution. Any help would be appreciated.
Sorry for the long title, first time poster here.

This thread is pretty old, are you still having this issue?

Error encountered while signing: The Windows Cryptographic Service Provider reported an error: Access was denied because of a security violation. Error Code: 2148532330

Last night when i tried to sign a document i received the mesage below and after that it says this document can't be signed what can i do to fix this problem.
Error encountered while signing:
The Windows Cryptographic Service Provider reported an error:
Access was denied because of a security violation.
Error Code: 2148532330

I assume you are implying "biztax" application here, right?
I have contacted their program lead, with no result at all.
Past days I have been searching for a solution - reinstalls / new systems - no solution.
This issue appeared a week or two ago only.
I found http://forums.adobe.com/message/5338853 useful - but no positive results either.
http://test.eid.belgium.be/faq/faq_nl.htm obviously didnt help either.
If anyone finds a solution to this issue, please do let me know - any help is appreciated.
Biztax tells to use the "signature", not the "authentication" - but it is only Auth. that is showing up as option to sign (that works)
ps, did you fiddle with the Adobe Reader XI security settings and import that PKI etc as well? I hoped that would be the breaktrough. Sadly i'm still crying in my chair.
Oh, and dont forget: they claim nobody else got this issue. Maybe one or two people. (We got about 8 customers experiencing exactly the same symptoms at the same time )
> I noticed that when I try to open the pdf document that is 'signed' by the government it is not showing the filename in the title bar, but only " - Adobe Reader". every piece of info helps I guess.
Obviously last version of Reader 11.0.03

Error occoured while runnin t-code VA01

Similar Messages

Maybe you are looking for