Error occur after try to add attribute for ViewObject !!
Hi
Please someone help to suggest me !
I have added filed in database table and I want this filed show on my UIX page. So I added new attribute to EO and VO which declare for this table. After that I add this field to my page . I run program but error is occured.
Error show that
Error
1.Invalid column index
2.JBO-25046: Requested row not available in row set iterator WorkflowsAllVO1.
How should I do to correct this problem ?
Thanks
Now I can correct the problem ! In my viewobject I use expert mode for query and I forgot to add new column to query.
Similar Messages
-
An error occured while creating the original attribute for message no26 296
Hi All,
I am new to DMS , we are trying to store PM documents on content server , created a storage category and while assigning files to storage category then on saving the document i get the below error :
An error occured while creating the original attribute for
Message no. 26 296
Diagnosis
An error occured while creating an original in the Knowledge Provider.
System Response
The original could not be created.
Procedure
Contact the systems administrator and check the log file (transaction Evaluate application log, object SDOK).
Please let me know what configs i am missing ...
Thanks in advance
regrds
pushpaHi Pushpa,
Which enhancement package are you on currently? This is observed in cases where originals in DIR's are invisible and sometimes error message 26296 occurs in transaction CV01n. Hence,please check your entries in the table SDOKPROP to avoid such a problem in your system.
Further,suggest you explore if the below resolutions can be adopted in your case.
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=10321987
http://wiki.sdn.sap.com/wiki/display/PLM/OriginalsinvisibleafterEHP3or+EHP4
Regards,
Pradeepkumar haragoldavar -
An error occured while creating the original attribute for
Hi All,
We encounter this error in "An error occured while creating the original attribute for " DMS very often when a user edits a file & tries to check in.
I searched the forums & realized that this is caused by the inconsistencies in the KPRO & DMS server and removing these
inconsistencies will repair this issue.
I have been deleting the inconsistencies using DMS reports DMS_KPRO_READ & DMS_KPRO_CHECK1 and it resolves the error
so the file is unlocked. But I haven't been able to figure out the ROOT cause of this issue.I couldn't find any information on the root cause of this issue. What can be done to fix this error permanently.
Regards
-NehaHi Neha,
Please go to transaction SE16 and enter 'SDOKPROP' as table. Then enter 'DMS*' in the field PROP_NAME and press F8. Now all DMS related entries should be displayed to you. Please compare them with the following entries displayed in the attached screenshot and maintain the missing entries.
DMS_ACTIVE_VERSION 00 Active Version
DMS_APPLICATION 00 Logical application
DMS_CHECKOUT_USER 00 Checkout User
DMS_CREATE_AUDIT 00 Generate new version of the original
DMS_DEFAULT_LANGUAGE 00 Default Language
DMS_DELETEABLE 00 PHIO deletable
DMS_DOC_KEY 02 IWB_DMS01 DMS_DOCKEY Document info record
DMS_DOC_VERSION 00 Version of relevant document
DMS_DRAW_APPNR 00 Application number from DRAW
DMS_DRAW_DTTRG 00 Data carrier from DRAW
DMS_DRAW_FILEP 00 File name from DRAW
DMS_FILE1 00 File name(firstpart)
DMS_FILE2 00 File name(secondpart)
DMS_FILE3 00 File name(thirdpart)
DMS_FILE_ID 00 GUID that points to table DMS_PHIO2FILE
DMS_FRMTXT 00 Format description, ID of additional file
DMS_MUP_CAT 00 Markup category
DMS_MUP_FLAG 00 Markup flag
DMS_ORDER 00 Sequence of additional files
DMS_STATUS 00 Document status
DMS_STATUSNR 00 Number in status protocol
DMS_STATUSNR_X 00 References to Status Log
Please pay attention that all entries are typed well and that there are no spelling errors. If all these values are maintained correctly in table SDOKPROP the dump and the error message should no longer appear.
For further information you can also see the corresponding SDN WIKI page under
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/plm/error26296in+CV01N
Regards,
Ravindra -
An error occured while creating the original attribute....
Hello Gurus,
I am getting an error message when I try to save a document using CV01N. It says:
"An Error occured while creating the original attribute for XXX"
Can someone please help me here ?
Regards,
Rajesh.We get the same error message sometimes but then the documnet already is created. Trouble then is that s an inconsistence in the KPRO.
There is an incomplete/orphaned LOIO (logical object identifier), incomplete means that there is no original associated to it.
Don't know why this happens but we fix by doing following.
I run transaction SE38 and execute program DMS_KPRO_CHECK1
In bottom of the result list there is a section called: Loios in DMS without reference to KPRO. These documents have a LOIO but no original.
This can be checked running transaction SE38 and execute program DMS_KPRO_READ.
When the document is checked in DMS_KPRO_READ I go back to DMS_KPRO_CHECK1, and delete the LOIO.
The inconsistency will then be cleared.
Hope this can be of any help for you.
Regards
Daniel -
I cant download itunes programme for my samsung rv510 laptop, it says error occurs after I try to instal the 10.7 version? What do I need to do?
.dmg.part is not a complete file.. It usually indicates that the entire file has not been downloaded yet. Are you sure you downloaded the entire file? (i recommend updating itunes through > Software Update
Alternatively, you can download it from here: http://support.apple.com/kb/DL1614 -
While deploying sharepoint hosted app i am getting error "Error occurred in deployment step 'Install app for SharePoint': We're sorry, we weren't able to complete the operation, please try again in a few minutes. If you see this message repeatedly, contact
your administrator.". From the developer site i remove the app manually and after deploying i am getting the same error again.
Harminder singhI was trying to install SharePoint 2013 on premise development environment and encountered the following issues while deploying the app using Visual studio 2013.
Please refer these articles for configuration settings.
http://blogs.msdn.com/b/how24/archive/2013/06/14/prepare-your-sharepoint-2013-farm-for-app-development-and-debugging.aspx
http://www.codeproject.com/Articles/515677/MyplusFirstplusSharepoint-HostedplusAppplusinplus2
http://blogs.technet.com/b/mspfe/archive/2013/01/31/configuring-sharepoint-on-premise-deployments-for-apps.aspx
http://aanuwizard.com/2012/12/07/article-14-from-30-system-account-can-not-deploy-or-purchase-an-app-in-sharepoint-2013-rtm/
Error 1:
Error occurred in deployment step 'Install app for SharePoint': The System Account cannot perform this action.
Error 2:
The local SharePoint server is not available. Check that the server is running and connected to the SharePoint farm.
Error 3:
Error occurred in deployment step 'Install app for SharePoint': We're sorry, we weren't able to complete the operation, please try again in a few minutes. If you see this message repeatedly, contact your administrator.
Solution:
For error 1, follow these instructions:
a. Create a new domain account DOMAIN\myApp_Admin
b. add DOMAIN\myApp_Admin to local admin group
c. add DOMAIN\myApp_Admin to Farm Administrators group
Central Admin site --> Site Settings --> People and groups
Add DOMAIN\myApp_Admin
For error 2 & 3, follow these instructions:
1. Grant DOMAIN\myApp_Admin accont a sysadmin server role on SQL server
2. Open SharePoint Power Shell and execute Add-SPShellAdmin <DOMAIN\myApp_Admin> command.
3. Grant DOMAIN\myApp_Admin a db_owner rights to web application Content database that you would like to use for debugging SharePoint 2013 app.
4. Make sure following roles are assigned for SharePoint_Config database
SharePoint_Shell_Access
SPDDataAccess
public
5. Make sure following roles are assigned for SharePoint_Content database
db_owner
5. Make sure following roles are assigned for SharePoint_AdminContent database
public -
2TB Time Capsule getting "An unexpected error occurred. Try again" error after a hard reset
Hi,
I'm working with a brand new 2TB Airport Time Capsule and after I performed a Hard reset as expalined in the forums I'm not able to configure it any more. I receive "An unexpected error occurred. Try again" from the AirPort Utility.
I'm running Mavericks in my Mac and I'm not sure what else to do. Any suggestions?Completely isolate the Mac and the TC from the network.. plug the TC lan port by ethernet to the Mac.
Factory reset the TC.
Factory reset TC Gen 5 or AE Gen 6
Unplug your AE/TC .. hold in reset and power the TC/AE back on.. without releasing the reset.. wait until status led flashes rapidly.
Make sure in the ethernet settings you have ipv6 set to link local and the dhcp set for ip. It should give you an address of 10.0.1.2
Open the airport utility, using the top menu.. File, Configure Other.
Type in the address, 10.0.1.1 .. no password is required at this stage.
Click ok and the main setup will open.
Set all the names short, no spaces and pure alphanumeric.
Set the TC to the right mode .. dhcp+nat for router or off (bridge mode) for bridge.
Set wireless to create a wireless network.
No luck then the TC is faulty and needs to be returned. -
Hi I am getting the error
Error occurred in deployment step 'Add Solution': A feature with ID 10495515-2482-41fd-98eb-3c87f739f54b has already been installed in this farm. Use the force attribute to explicitly re-install the feature.
when trying to deploy web parts
question 1 - how do i use the force attribute when deploying from visual studio
question 2 - am i deplying it to the right place, if i deply it to the
url:port that points to my central admin tool it deploys but i cant seem to see it in any of my webs in my site collection, if i deploy it to the
url:port that points to my site collection I get this error.
im new to all this by the way :)
thanks in advanceIf you are deploying from Visual Studio then please follow this post:
http://sharepointfordeveloper.blogspot.com/2014/03/solved-visual-studio-issue-error.html
Open the visual Studio and navigate to the feature XML file and add the bellow attribute.
AlwaysForceInstall="TRUE"
The <FeatureName>.Template.Xml output would be some think link this.
<?xml
version="1.0"
encoding="utf-8"
?><Feature
xmlns="http://schemas.microsoft.com/sharepoint/"
AlwaysForceInstall="TRUE"></Feature> -
have itunes vouchers and each time i click redeem , I get error "we could not complete your itunes store request, an unknown error occured 1202, try again later. I have tried this for 4 days running and get same error.
I have this same problem. It's like it is not Authorizing this Mac.
What happens when you try to listen to a preview on the Music Store?
Mine asks me to authorize again and gives me the error exactly as you said above.
What happens when you try to view your account information (in Music Store, click on your account name in the top right corner)?
Mine lets me authorize sucessfully and shows me my account information.
I have emailed iTunes support about this and they replied with a generic answer about Deauthorizing and re-authorizing the computer.
I even tried, to no avail, the tips here...
http://discussions.apple.com/thread.jspa?threadID=471237&tstart=30
If anybody reads all this and has any new info for us, please take the time to post it here!
PowerMac G4 Mac OS X (10.4.6) -
When I try to use the radio feature under "computer" I am now receiving a message that "an error occurred, please try later". This is now affecting all of the stations and does not go away when I try later. I have reset the password but am still getting the message. Any suggestions?
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Test. -
Error occurred in deployment step 'Add Solution': Failed to load receiver assembly
Guys,
I've created a VS2010 sharepoint project and added a feature event receiver to my site definition. When I try to deploy it show me the error bellow:
Error 1 Error occurred in deployment step 'Add Solution': Failed to load receiver assembly "SiteDefinitionProject2, Version=1.0.0.0, Culture=neutral, PublicKeyToken=a693a58979940483" for feature "SiteDefinitionProject2_Feature1" (ID: 9dce3ed9-5eb0-4bea-b42d-4dad84559a36).:
System.IO.FileNotFoundException: Could not load file or assembly 'SiteDefinitionProject2, Version=1.0.0.0, Culture=neutral, PublicKeyToken=a693a58979940483' or one of its dependencies. The system cannot find the file specified.
File name: 'SiteDefinitionProject2, Version=1.0.0.0, Culture=neutral, PublicKeyToken=a693a58979940483'
at System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection)
at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
at System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
at System.Reflection.Assembly.Load(String assemblyString)
at Microsoft.SharePoint.Administration.SPFeatureDefinition.get_ReceiverObject()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
0 0 SiteDefinitionProject2
9dce3ed9-5eb0-4bea-b42d-4dad84559a36
Someone can hepl!?
André RentesI also just encountered this error while trying to deploy my feature from Visual Studio 2010. I found the solution for my situation. Perhaps it may help others as well.
To see if your problem has the same cause as I encountered, open up the 14 hive and go to 14/template/features/<your-project-name_your-feature-name>. In this folder you will find a file Feature.xml. Open it up with notepad. On the second line
you will find the XML node Feature. Scroll to the right untill you see the XML attribute ReceiverClass. This
should show you a namespace, i.e. KoenZomers.MyProject.Branding.Features.Web.BrandingEventReceiver. In my situation it didn't show a namespace, but instead the following: $SharePoint.Type.<some-guid>.FullName$. If this is the same for
you, read on as this might be the solution to your problem. If it does already show a namespace, this probably won't help you.
This problem is caused because of a bug in Visual Studio 2010. It should replace the guid to match the guid found above the class declaration of your event receiver. For example:
[Guid("ff9717e0-05c4-4e7e-9349-3f31d3919b9c")]
public
class
BrandingEventReceiver
: SPFeatureReceiver
Probably because I recreated the event receiver class, it did generate a new Guid tag with a new Guid above my class declaration, but it did not update the feature file to reference this new guid. To do this manually, open up the folder on your development
machine where your Visual Studio project files reside. In it you will find a subfolder named Features. Open it. In that folder you fill find subfolders with the names of your features as given in Visual Studio. Open up the one containing the non functional
event receiver. In that folder you will find a file called <feature-name>.feature. Right click on it and choose Open with. Select to open it with notepad. On the second line you will find the XML node feature. Scroll to the right until you see the XML
attribute receiverClass in the same line. Make sure the value of this XML node is built up using the following syntax: $SharePoint.Type.<guid-from-event-receiver-class-declaration>.FullName$. So in the above example it would be $SharePoint.Type.ff9717e0-05c4-4e7e-9349-3f31d3919b9c.FullName$.
Save the file, close notepad. Close the solution in Visual Studio. Once closed, reopen the solution. Do a deploy of your solution. It should work this time. If you check the feature.xml file in the 14 hive now, it does display a namespace. This
made it work for me. -
hi,
when i was trying to deploy a SP solution from my vs 2012 solution. this error is displayed.
i tried many things like
1) get the wsp and apply power shell cmds to add and deploy, here also it failed:
Add-SPSolution -LiteralPath d:\mywsp.wsp
Install-SPSolution mywsp.wsp -GacDeployment -AllWebApplications -Local
2) restart the timer services and do iisreset and reboot the server. etc .as mentioned in one of the the below blogs:
http://sharepoint1on1.blogspot.in/2014/04/sharepoint-error-occurred-in-deployment.html
http://suehernandez.wordpress.com/2011/03/31/error-occurred-in-deployment-step-activate-features-operation-is-not-valid-due-to-the-current-state-of-the-object/
http://www.dotnetsharepoint.com/2014/04/error-occurred-in-deployment-step-add.html
http://social.msdn.microsoft.com/Forums/en-US/63adde23-03cf-4b65-923e-1219da94a780/error-occurred-in-deployment-step-add-solution-operation-is-not-valid-due-to-the-current-state-of?forum=sharepointdevelopmentprevious
http://www.shakirmajeed.com/error-occurred-in-deployment-step-activate-features-operation-is-not-valid-due-to-the-current-state-of-the-object/
but even after doing all these steps, the error still persists!. and am not deploying into a remote server, the dev env is in a VM, where sp 2013, vs 2012, sql 2012 are installed.
just wanna share one note: there is a isue in my search admin component. index was reset due to some reason. and from that time onwards my search full/incremental crawls were not working!
will this cause an issue in my wsp deployment ? i hope it wont, still asking...
can anyone help me how to resolve this error.because this is a show stopper for me for the last few days!
help is highly appreciated!This issue cause because of feature activation failure while WSP deployment.
when you create a WSP using visual studio, it creates WSP package with default deployment configuration settings.
Please restrict feature activation configuration, this will help you to troubleshoot this issue.
- Click on Project in WSP and press F4, it will open "Project Properties"
- set "Active deployment Configuration" - as "No Activation"
- you can activate this features in required sequence after deployment using Activate-SPFeature
If my contribution helps you, please click Mark As Answer on that post and Vote as Helpful
Thanks, ShankarSingh(MCP) -
Hi Expert,
I need help.
I created a custom button to download data to an excel sheet. after clicking the button I am getting message
"An error occurred; please try again. If the error persists, please contact technical support.".
I tried debugging WCEM, but it is not even reaching that point.
Your help will be highly appreciated.
here is the code.
BitContentview.XHTML
<wec:commandButton id="bdtexcel" immediate="true" actionListener="#{cc.vch.DownloadBITData}" type="submit" value="#{i18n['invoices.ui.openitems.printSelected']}"/>
UI-repository.xml
<ViewComponent name="BITContentView" componentHandlerClassName="com.cpr.cprwec.app.comm.module.ebpp.ui.handler.impl.BITDetailViewVCHandler"/>
BITDetailViewVCHnadler.java
package com.cpr.cprwec.app.comm.module.ebpp.ui.handler.impl;
import com.cpr.cprwec.app.comm.module.ebpp.backendobject.interf.EbppBackend;
import java.io.IOException;
import java.text.ParseException;
import java.text.SimpleDateFormat;
import java.util.Date;
import java.util.List;
import javax.faces.context.FacesContext;
import javax.faces.context.FacesContext;
import javax.faces.event.ActionEvent;
import javax.servlet.ServletOutputStream;
import javax.servlet.http.HttpServletResponse;
import com.cpr.cprwec.app.comm.module.ebpp.modulemgmt.impl.EbppModuleAccessImpl;
import com.cpr.cprwec.app.comm.module.ebpp.modulemgmt.interf.EbppModuleAccess;
import com.cpr.cprwec.app.comm.module.ebpp.ui.dto.impl.DisputeDataDTOImpl;
import com.cpr.cprwec.app.comm.module.ebpp.ui.dto.impl.OpenItemDTOImpl;
import com.cpr.cprwec.app.comm.module.ebpp.ui.dto.interf.DisputeDataDTO;
import com.cpr.cprwec.app.comm.module.ebpp.ui.dto.interf.OpenItemDTO;
import com.cpr.cprwec.app.comm.module.ebpp.ui.dto.impl.BITDataDTOImpl;
import com.cpr.cprwec.app.comm.module.ebpp.ui.dto.interf.BITDataDTO;
import com.cpr.cprwec.app.comm.module.ebpp.ui.dto.impl.BITDetailDTOImpl;
import com.cpr.cprwec.app.comm.module.ebpp.ui.dto.interf.BITDetailDTO;
import com.sap.wec.app.common.module.common.attachment.businessobject.interf.Attachment;
import com.sap.wec.tc.core.backend.sp.jco.JCoConnection;
import com.sap.wec.tc.core.businessobject.BusinessObjectException;
import com.sap.wec.tc.core.common.exceptions.ApplicationBaseRuntimeException;
import com.sap.wec.tc.core.common.logging.WCFLocation;
import com.sap.wec.tc.core.common.searching.businessobject.impl.GenericSearch;
import com.sap.wec.tc.core.common.searching.businessobject.interf.GenericSearchReturnResultData;
import com.sap.wec.tc.core.common.util.GenericFactory;
import com.sap.wec.tc.core.common.util.Message;
import com.sap.wec.tc.core.common.util.MessageList;
import com.sap.wec.tc.core.common.util.table.Table;
import com.sap.wec.tc.core.common.util.table.TableRow;
import com.sap.wec.tc.core.modulemgmt.ForeignModuleAccess;
import com.sap.wec.tc.core.modulemgmt.ModuleAccess;
import com.sap.wec.tc.core.modulemgmt.exceptions.ModuleInactiveException;
import com.sap.wec.tc.core.modulemgmt.exceptions.ModuleLifecycleException;
import com.sap.wec.tc.core.runtime.WecFrameworkRuntime;
import com.sap.wec.tc.core.runtime.WecSession;
import com.sap.wec.tc.core.runtime.jsf.WecFrameworkRuntimeJSF;
import com.sap.wec.tc.core.runtime.jsf.composition.PageManagerBean;
import com.sap.wec.tc.core.runtime.navigation.NavigationCondition;
import com.sap.wec.tc.core.ui.composition.menu.MenuManager;
import com.sap.wec.tc.core.ui.composition.menu.MenuMetadataException;
import com.sap.wec.tc.core.ui.vc.BuildTime;
import com.sap.wec.tc.core.ui.vc.NavigationParameterBinding;
import com.sap.wec.tc.core.ui.vc.RequestParameterBinding;
import com.sap.wec.tc.core.ui.vc.impl.ViewComponentHandlerBaseImpl;
import com.cpr.cprwec.app.comm.module.ebpp.businessobject.interf.BIT;
import com.cpr.cprwec.app.comm.module.ebpp.businessobject.impl.BITImpl;
public class BITDetailViewVCHandler extends
ViewComponentHandlerBaseImpl<EbppModuleAccess> {
protected static final WCFLocation LOCATION = WCFLocation
.getInstance(BITDetailViewVCHandler.class.getName());
public BITDataDTO bitDataDTO;
public BITDetailDTO bitDetailDTO;
public List<BITDataDTO> BITDataDTOList;
public List<BITDetailDTO> BITDetailDTOList;
public boolean noBITData;
public boolean noBITDetail;
public boolean renderPanel = true;
public boolean isDownloadBITData;
public boolean isDownloadBITDetail;
public boolean downloadStarted=false;
public boolean BITFound =false;
public boolean isBITFound() {
return BITFound;
public void setDownloadStarted( boolean downloadStarted ){
this.downloadStarted = downloadStarted;
public boolean getDownloadStarted(){
return this.downloadStarted;
public void setBITFound(boolean BITFound) {
this.BITFound = BITFound;
public String getObjectID() {
return objectID;
public void setObjectID(String objectID) {
this.objectID = objectID;
public List<BITDataDTO> getBITDataDTOList() {
return BITDataDTOList;
public List<BITDetailDTO> getBITDetailDTOList() {
return BITDetailDTOList;
public Boolean getNoBITData() {
return noBITData;
public Boolean getNoBITDetail() {
return noBITDetail;
public Boolean getRenderPanel() {
return renderPanel;
private static final int DEFAULT_BUFFER_SIZE = 1024000;
public Attachment attachmentData;
public Attachment getAttachmentData() {
return attachmentData;
@RequestParameterBinding(maxLength = 1024)
protected String objectID;
@BuildTime
public String processBuildTime() throws BusinessObjectException {
BIT BIT = null;
noBITData = noBITDetail = false;
renderPanel = true;
if (isLoggedIn()) {
if ( isDownloadBITData == true ){
this.downloadBITDataExcel();
else {
this.getModuleAccess().getBITBO().clearMessages();
BIT = this.moduleAccess.getBITBO().getBITFromBackend(objectID);
BITDataDTOList = BIT.getBITDataDTOList();
BITDetailDTOList = BIT.getBITDetailDTOList();
MessageList objectData = this.getModuleAccess().getBITBO()
.getMessageList();
if (objectData.size() > 0) {
noBITData = noBITDetail = true;
renderPanel = false;
this.addMessageList(objectData);
return checkLoginCondition();
private boolean isLoggedIn() {
return checkLoginCondition() == null;
private String checkLoginCondition() {
NavigationCondition navCondition = getNavigationCondition("login");
if (!navCondition.isFullfiled()) {
navCondition.addToNavigationStack();
return navCondition.getOutcome();
return null;
public String downloadBITData(){
downloadStarted = true;
isDownloadBITData = true;
downloadBITDataExcel();
return checkLoginCondition();
public void downloadBITDataExcel() {
// dummyDebug("downloadBITDataExcel", BITDataDTOList.size(), "", "" );
if (BITDataDTOList.size() > 0) {
try {
attachmentData = this.getModuleAccess().getDownloadBO()
.getBITDataExcel(BITDataDTOList);
if (attachmentData != null) {
FacesContext faces = FacesContext.getCurrentInstance();
HttpServletResponse response = (HttpServletResponse) faces
.getExternalContext().getResponse();
response.reset();
response.setContentType(attachmentData
.getAttachmentMimeType());
response.setContentLength(attachmentData
.getAttachmentContent().length);
response.setHeader("Content-disposition",
"attachment;filename="
+ attachmentData.getAttachmentName());
response.setBufferSize(DEFAULT_BUFFER_SIZE);
ServletOutputStream out;
try {
out = response.getOutputStream();
out.write(attachmentData.getAttachmentContent());
out.flush();
faces.responseComplete();
} catch (IOException e) {
throw new ApplicationBaseRuntimeException(
"Problem opening file", e);
} finally {
attachmentData = null;
} catch (BusinessObjectException e) {
e.printStackTrace();
isDownloadBITData = false;Thanks Hamendra for checking the issue.
I am setting up breakpoints in WCEM, tab JAVA EE then from menu RUN->Toggle brekpoints and then debug configuration.
the breakpoints are in several places in handler class BITDetailviewVCHandler class including method downloadBITData.
this method I am calling from BitContentview.XHTML
<wec:commandButton id="bdtexcel" immediate="true" actionListener="#{cc.vch.DownloadBITData}" type="submit" value="#{i18n['invoices.ui.openitems.printSelected']}"/>
When the BIT page is loading the control stops at the breakpoint.
but it is not stopping there when i click the 'Excel Download' button.
How do I get the log file. I am very new to WCEM, please guide me.
I tried to debug the UI using Google chrome. it is giving me the following error.
POST https://<>/<>/<>/<>HomePage.jsf?wec-appid=<>MAINAPP6&wec-locale=en_US 500 (Internal Server Error)
when I expand the node
c.event.trigger:<>/<>/javax.faces.resource/sap/comp.theme/templates/jquery/lib/jquery-1.4.2.min.js.jsf:54
c.event.trigger:<>/<>/javax.faces.resource/sap/comp.theme/templates/jquery/lib/jquery-1.4.2.min.js.jsf:54
c.event.trigger:<>/<>/javax.faces.resource/sap/comp.theme/templates/jquery/lib/jquery-1.4.2.min.js.jsf:66
(anonymous function):<>/<>/javax.faces.resource/sap/comp.theme/templates/jquery/lib/jquery-1.4.2.min.js.jsf:30
c.extend.each:<>/<>/javax.faces.resource/sap/comp.theme/templates/jquery/lib/jquery-1.4.2.min.js.jsf:24 c.fn.c.each:<>/<>/javax.faces.resource/sap/comp.theme/templates/jquery/lib/jquery-1.4.2.min.js.jsf:66 c.fn.extend.trigger:<>/<>/javax.faces.resource/<>dev/comp.theme/templates/jquery/js/commandButton.js.jsf:31
com.sap.wec.commandButton.submitForm:<>/<>/main/<>HomePage.jsf?wec-appid=<>MAINAPP6&objectID=500000233&page=D61CFFF8E75D48A1B348F315D209EFF9&wec-locale=en_US:48 onclick
Navigated to https://wsapdjd803.<>.ca:<>/<>/main/<>HomePage.jsf?wec-appid=<>MAINAPP6&wec-locale=en_US
Seems to be it is failing somewhere commandButton-related JavaScript functions
Thanks
Subassish -
"An unexpected error occurred. Try again." Extreme/Express cannot connect to existing network
Recently my Speedstar wired modem died. So I had a relatively unused NETGEAR DG834GT wireless modem. Had no idea the old AirPort Extreme Base Station with modem was giving me crappy Wi-Fi speeds. I am enjoying speeds almost 6 x faster now. However I had to reset my entire Wi-Fi network and create a new one. I have an ethernet cable connected from the NETGEAR to the AirPort Extreme. I just want to extend my new Wi-Fi network so I have AirPlay back up and running on my three separate surround sound systems.
SPECS
OSX 10.9.4 (both MacBook Air and Mac Mini)
AirPort Utility 6.3.2
AirPort Extreme (2nd generation)
AirPort Express (1st and 2nd generation)
NETGEAR DG834GT (Mode g & b, WPA-PSK Wi-Fi Protected Access Pre-Shared Key)
AirPort Utility initially displayed all three Airport devices, but with the exclamation mark. I assume it was because I had set up an new Wi-Fi network with a new wireless modem so I had to "Forget" network and start over again.
I've reseted each and every AirPort device to factory setting. AirPort Utility recognised each "new" device, and I selected "Join existing network." After several tries, AirPort Utility continually tells me that "An unexpected error occurred. Try again." This happens every time.
I followed Apple's Support advice: http://support.apple.com/kb/TS4597 "AirPort base station not seen or "An unexpected error occurred" appears in AirPort Utility 6.3" to no avail (configuring it to Link-Local).
What can I do so both my MacBook Air and Mac Mini can talk to each other (instead of opening AirDrop all the time) and for AirPlay to work on my three surround sound systems? One would assume that all AirPort devices should be able to readily and easily join an existing network. Is it due to my NETGEAR not playing nice with Apple AirPort devices due to it's wireless capabilities? I even entered through the NETEAR setup wizard and checked if any devices had connected via MAC, but it had none listed.
What should I do?Reset the express to factory settings.
Place it in the same room as the TC..
If you are going to extend wireless do not connect ethernet.. just go through the setup from the airport utility.. if it fails.. welcome to Yosemite. The worst piece of network for ages..
Do you have ipad.. even an iphone .. load the airport utility on and run the setup from there.. it is much more reliable. -
Error occurs after I install sps16,
Error occurs after I install sps16, when I am using the My Tasks views, while I clicked on the Edit link to add a document to Attachments of that task, a new window pop up. but this is a blank windows!
how can I sloved this problem?
thanks
regardsI suggest that you search the SAP notes at http://service.sap.com/notes and if there isn't a solution there, send a message to SAP at http://service.sap.com/message. You ay them at lot of money each year for support, you may as well use it.
Paul
Maybe you are looking for
-
Is there a solution for my "files in use" installation problem with Adobe Reader XI?
I have tried repeatedly to download Adobe Reader XI (11.0.07), but I keep getting a "files in use" message that indicates my current version, Adobe Reader 8.1, is using files that need to be updated by the download's set up. The message directs me to
-
Keyboard and mouse working weird
hello, for some reason my keyboard wont let me type "r". SHIFT+r works though. if your wondering how ive been typing the "r"s above, i used copy and paste. my mouse will work fine 75% of the time, but once in a while it will flip out and randomly go
-
Data Guard - Keeping same SID/Instance Name across both sites
Hello, We are working on a project to move the databases from legacy to new servers. The migration plan is to use Data Guard option for our migration strategy. We would like to know followings. 1) Is it possible to build stand by databases with same
-
ACE server initiating traffic issue
Hello I'm trying to establish a session between one of my real servers behind the ace and some external network without any NAT. According to the documentation I should only configure correct ACL on both the client and server vlan and it should works
-
Why are my "all day" events and birthdays suddently off by one day in my calendars?
Is this a bug in the apple upgrade that came out last night?