Error occur when installing iPlanet App server 6.0 SP2

Dear All,
I have problems in installing the iPlanet App server 6.0 SP2 in Solaris.
I choose typical installation and select default settings.
- install iplanet server
- typical install
- install ALL components
However, the following errors occur during the installation:
sh: ./pre_nas_preinst: not found
ERROR. Failure installing iPlanet Application Server Web Connector Component. Do you want to continue [n]?
ERROR. Failure installing iPlanet Application Server Core Server Component. Do you want to continue [n]?
ERROR. ...........
What's the problem with it? Could anyone help....?
Thank youin advance.
Thx & Regards,
Yvonne

I would recommend to use the latest version of application server which is iAS6.5sp1MU2. Try this out and see if you run into any problems. Also please check the release notes available at docs.sun.com to check the compatibility.

Similar Messages

Error 0x80070643 when installing DHCP Windows Server 2008 ENTERPRISE SP2 64bit

When I try to install role DHCP on Windows Server 2008 I get the following error:
Attemp to install DHCP Server failed with error code 0x80070643. Fatal error during installation.
Please somebody help me!....
Jorge

Hi Jorge,
I am sorry to hear that.
Here are a few things that I suggest you try:
Grant Full Control for SYSTEM, NETWORK SERVICE and Administrator on C:\Windows\ServiceProfiles\networkservice folder.
If you have Windows Process Activation service installed on the machine, uninstall it.
Open required RPC ports.
More information for you:
Service overview and network port requirements for Windows
http://support.microsoft.com/kb/832017#method7
If the issue still persists, please check the event logs to see if there are any related error messages and troubleshoot accordingly.
Regards,
Amy

When i try to install iPlanet App Server on NT, I do not get screen to enter license key valid for evaluation. --- " cache File Read error"

When i try to install iPlanet App Server on NT, I do not get screen to enter license key valid for evaluation.
Also during installation screens an error window is displayed saying "cache File Read error -- Could not read ProductKey entry from the cache file "

Hi,
I also get the following message:
"Could not read ProductKey entry from the cache file"
I have no idea how to provide the installation software with the key. I also tried "keycheck.exe"
Do you have a solution for this problem? Did you finish the installation?
Christian

Problem while installing iPlanet App server 6.5

when trying to install iplanet app server 6.5 on solaris 2.8, downloaded from the net, the installation hangs when displaying the progress bar. We have iplanet web server 6.0 sp2 installed in the machine. We also installed all the solaris patches it required. we tried 3,4 times,it is not giving any error message,just the installation screen hangs....
Thanks in advance,
[email protected]

Hi,
I haven't come across such an issue before but I would like to help. This could be probably because, the downloaded file may be corrupted due to come reasons. I would recomend you to give a try after downloading it once again. Please let me know your thoughts on the same.
Regards
Ganesh .R
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers/support

App-v 5.0 SP2 hotfix 5, an error occurred when querying the App-V WMI provider

Hi,
We have installed App-v 5.0 SP2 + hotfix 5 (via SCCM 2012 R2 CU1) on some Windows 7 clients. That worked fine but no app-v applications go through.
Error:
AppVPackageQueryClient5X::GetPackageDataByPackageGUID() failed for virtual application [a835fa1-f82a-4efe-957a-8c6678d4a431]. (0x87d01290)   AppVHandler   5/08/2014 10:23:56   3440 (0x0D70)
CAppV5XHandler::DiscoverIndividuleApp() failed. (0x87d01290)   AppVHandler   5/08/2014 10:23:56   3440 (0x0D70)
+++ Discovery of application [AppDT Id: ScopeId_8B8D93AF-5181-48FE-9202-2CFE5FC93EE2/DeploymentType_50eba242-3688-4b4f-9b61-84f0123f667d, Revision: 7] returned an error (0x87d01290).   AppVHandler   5/08/2014 10:23:56
3440 (0x0D70)
CAppV5XHandler::DiscoverApp() failed. (0x87d01290)   AppVHandler   5/08/2014 10:23:56   3440 (0x0D70)
Deployment type detection failed with error 0x87d01290.   AppDiscovery   5/08/2014 10:23:56   3440 (0x0D70)
Failed to perform detection of app deployment type Microsoft - Console, revision 6) for user. Error 0x87d01290   AppDiscovery   5/08/2014 10:23:56   3440 (0x0D70)
Error = 0x87d01290 = An error occurred when querying the App-V WMI provider.
Please advise on this specific error. Should we look for corruption in app-v client, problem in sccm client ...?
J.
Jan Hoedt
Update: clients which don't have problems are client which had hotfix 4 THEN hotfix 5 installed. Should we install it that order? Client WITH problems have App-v 5.0 SP2 then hotfix 5 directly.
Update2: I installed the app-v client via setup.exe, the hotfix 4 also via setup.exe but since it installed all language packs, I decided to extract hotfix 5 and use the msp.
Could that be cause of the issue? I could use the exe of hotfix 5 but then I need to be sure how NOT to install all the language packs.

I think we found a solution ourselves.
My update2 (question) explains it:
Update2: I installed the app-v client via setup.exe, the hotfix 4 also via setup.exe but since it installed all language packs, I decided to extract hotfix 5 and use the msp.
Could that be cause of the issue? I could use the exe of hotfix 5 but then I need to be sure how NOT to install all the language packs.
We installed App-v 5.0 SP2 via exe then installed hotfix via msp (extracted msp), this doesn't seem to work (though installation was succesfull). When we deploy the hotfix via the exe it works correctly.
Not sure why though.
Jan Hoedt

Iphone 4s - try to install latest update ios 7.1.2 - unable to install update - an error occured when installing 7.1.2

iphone 4s - trying to install latest update ios 7.1.2 - takes long time to verify and then i get unable to install update - an error occured when installing 7.1.2?
how do I install?

First it would help if you identified the error. That might assist you in knowing what to do next. See this support document for help with error codes when unable to update or restore the iPhone. Resolve iOS update and restore errors
Then you can also see this support document for trouble with updating the device. If you can't update or restore your iOS device

I keep getting "an error occurred when installing, please run program again" for OS X mountain lion, how can i fix the problem?

i keep getting "an error occurred when installing, please run program again" for OS X mountain lion, how can i fix the problem?

The Reset feature adds a folder on your desktop named Old Firefox Data. I recommend hanging onto that for a few weeks in case you discover something essential that the Reset feature left behind.
This article has a list of what is migrated and what is not during a Reset, in case you're curious: [[Reset Firefox – easily fix most problems]].

"An error occurred when communicating with the server. Check connectivity with your administrator to determine whether further action is necessary", then attempt to approve TimeSheet.

Kind day, colleague.
It was required to organize a statement chain for TimeSheet of employees, as we realized. Everything is good, but at linear managers in PSW opportunity to execute Approve when viewing TimeSheet of the employee remained, and in attempt to approve TimeSheet there
is a mistake.
500 Internal Server Error
"An error occurred when communicating with the server. Check connectivity with your administrator to determine whether further action is necessary. "
Accept, is carried out as it is necessary.
It is a bug or we not correctly realized approval chain?

issue is related to the user booking time against a task that was past the finish/end date listed in the Project Schedule.
To resolve the user needs to submit their time on a valid task that is still within the current reporting timeframe, or have the Project Manager
update the task in questions so that the finish/end dates are at or beyond the submission period and then republish the project. After that, the user should be able to go in and submit their timesheet with success.
http://patrickdrews.com/2012/09/project-server-2010-timesheet-submission-produces-an-error-occurred-while-communicating-with-the-server/
kirtesh

MOF syntax error occurred while installing 2008 SQL server Express on Vista Ultimate

I have tried cleaning, then installing 2008 SQL server Express on Vista Ultimate 3 times and spent hours on this. I have installed regular SQL server on 2003 server with no issues many times, but I have huge issues with 2008 SQL server Express. I keep getting the proceeding errors.
Any ideas?
Configuration file:            C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081202_010008\ConfigurationFile.ini
Detailed results:
Feature:                       Database Engine Services
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Failed: see details below
Configuration error code:      0x0A2FBD17@1211@1
Configuration error description: A MOF syntax error occurred.
Configuration log:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081202_010008\Detail.txt
Feature:                       SQL Client Connectivity SDK
Status:                        Passed
MSI status:                    Passed
Configuration status:          Passed
Feature:                       SQL Server Replication
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Failed: see details below
Configuration error code:      0x0A2FBD17@1211@1
Configuration error description: A MOF syntax error occurred.
Configuration log:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081202_010008\Detail.txt
Feature:                       Management Tools - Basic
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Failed: see details below
Configuration error code:      0x0A2FBD17@1211@1
Configuration error description: A MOF syntax error occurred.
Configuration log:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081202_010008\Detail.txt
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file:               C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081202_010008\SystemConfigurationCheck_Report.htm

Similar error (not SQL Express but Enterprise) on my network reveals the following issue (still prevalent after removing and re-adding the machine to the network):
The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/machinename.domainname.local. The target name used was cifs/MACHINENAME. This indicates that the password used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this is due to identically named machine accounts in the target realm (DOMAINNAME.LOCAL), and the client realm. Please contact your system administrator.
ALSO: The session setup from the computer MACHINENAME failed to authenticate. The name(s) of the account(s) referenced in the security database is MACHINENAME$. The following error occurred: Access is denied.
This default instance (Ent SQL 2008 on Ent Server 64 bit 2003 R2 SP2) failed with the MOF error using a service account to install SQL 2008. Repair does not work.   "The SQL Server feature 'SQL_Engine_Core_Inst' is not in a supported state for repair, as it was never successfully configured. Only features from successful installations can be repaired. To continue, remove the specified SQL Server feature."
I expected to have more luck with the information here: http://mark.michaelis.net/Blog/CategoryView.aspx?category=.Net but wound up with result seen in my next post.
Of note, tried the removal of leftover registry entries after a failed install as in link above, also removed sql folders prior to re-install. Error is the same and rather than list entire log here, there is a portion available below but as is evident, there is a permission error in the registry which verifies what mark michaelis has pointed out:
"Sco: Compile operation for mof file \etcls.mof.transformed failed. Exit code 3" "Configuration action failed for feature SQL_Engine_Core_Inst during timing ConfigNonRC and scenario ConfigNonRC." "A MOF syntax error occurred." "Configuration action failed for feature SQL_Engine_Core_Inst during timing ConfigNonRC and scenario ConfigNonRC." Here is more: at Microsoft.SqlServer.Configuration.Sco.WmiProvider.InstallMof() 2009-03-31 10:51:19 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.EtwSetup.Install(String strInstanceName, Guid guidInstance, String strPath) 2009-03-31 10:51:19 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineSetupPrivate.SetupETW(EffectiveProperties properties) 2009-03-31 10:51:19 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineSetupPrivate.Install_ConfigNonRC_Prepare(EffectiveProperties properties) 2009-03-31 10:51:19 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineSetupPrivate.Install(ConfigActionTiming timing, Dictionary`2 actionData, PublicConfigurationBase spcb) 2009-03-31 10:51:19 Slp: at Microsoft.SqlServer.Configuration.SqlConfigBase.SqlFeatureConfigBase.Execute(ConfigActionScenario scenario, ConfigActionTiming timing, Dictionary`2 actionData, PublicConfigurationBase spcbCurrent) 2009-03-31 10:51:19 Slp: at Microsoft.SqlServer.Configuration.SqlConfigBase.SlpConfigAction.ExecuteAction(String actionId) 2009-03-31 10:51:19 Slp: at Microsoft.SqlServer.Configuration.SqlConfigBase.SlpConfigAction.Execute(String actionId, TextWriter errorStream) 2009-03-31 10:51:19 Slp: Exception: Microsoft.SqlServer.Configuration.Sco.ScoException. 2009-03-31 10:51:19 Slp: Source: Microsoft.SqlServer.Configuration.Sco. 2009-03-31 10:51:19 Slp: Message: A MOF syntax error occurred.. 2009-03-31 10:51:20 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Microsoft SQL Server to file E:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20090331_102539\Registry_SOFTWARE_Microsoft_Microsoft SQL Server.reg_ 2009-03-31 10:51:20 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall to file E:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20090331_102539\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_ 2009-03-31 10:51:20 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\MSSQLServer to file E:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20090331_102539\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_ 2009-03-31 10:51:20 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Microsoft SQL Server to file E:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20090331_102539\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft SQL Server.reg_ 2009-03-31 10:51:20 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall to file E:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20090331_102539\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_ 2009-03-31 10:51:20 Slp: Sco: Attempting to write hklm registry key
(And so on - cannot read or write the registry key)...

Error occured when installing v1.02 OPN packages

I am running the 64x-based version of Windows 8.1 Enterprise and the most recent 64-bit version of Message Analyzer I could find (build 4.0.6396.0). When I try to install any v 1.02 OPN packages (Exchange ActiveSync, Office and SharePoint, or Exchange Web
Services), I get the following error:
You must install a version of Message Analyzer between 4.0.6866.0 and 4.0.6866.0 to install this package.
I've not found such a version available for download.

That version is only available on connect.microsoft.com. You can create an account and then find our program in the director and sign up there. Then you'll have access to this interim build.
Paul

Error occurs when installing bi content

Hi Guru's
Can any one help me to find the solution for this error when installing bi content.
We started with installing the required info objects for the query 0QM_C12_Q0001 (Inspection Results: Stability Study), but unfortunately the installation process fails with the error message u201CCannot access file /usr/sap/trans/tmp/TRAHASCK.LOSu201C. Please help
Thanks in advance

Hi ,
If you double click on the error message "/usr/sap/trans/tmp/TRAHASCK.LOSu201C there should be an error code given, can you
let us know what the error code is?
Best Regards,
Des.

Error occuring when installing Tiger

Hello,
I've been trying to install Tiger onto a friends Gigabit Ethernet G4 (Dual 450) and I keep experiencing an error during the install. Would a bad HD make this happen? His machine has both the original HD and a new Maxtor HD in it. I've run Disk Warrior, zapped the PRAM. What can I try next? Thanks for any help given.

Hi
Any clues on what error message is displayed (if any) ?!
There is a firmware update available for the Gigabit Ethernet if it hasn't already been applied:
http://docs.info.apple.com/article.html?artnum=86117
Also I assume it's a full retail version of Tiger rather than a machine specific version that shipped with a particular computer.

Error occur when installing weblogic server 10.3.3?

Hello,
I try to install weblogic server 10.3.3 in REDHAT linux 5.4 x86_64 (64-bit) server.
as installation manul direct (http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14142/guimode.htm#BABIFBII) , run
java -jar wls1033_generic.jar ( by the way, command "java -d64 -jar wlsversion_generic.jar" won't work at all)
in the x window, I can see the first page (weblogic 10.3.3...)
then before getting welcome page, I saw a dialog occured like
"A fatal erro has occured, this application will terminate"
What is wrong?
Thanks
Jerry
cc:
$ java -version
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 Linux amd64-64 j9vmxa64142-20080923 (JIT enabled)
J9VM - 20080922_23329_LHdSMr
JIT - 20080815_1845_r8
GC - 200809_04)
try to query JDK
$rpm -qa | grep jdk
(nothing appear... seems like I need to install 64 bit JDK), if yes, how?

I think your Java environment is a little out of date. I believe JDK 1.6.0_11 or higher is required for Weblogic 10.3.3
You can get an updated version at
http://java.sun.com/javase/downloads/widget/jdk6.jsp
Also recommend you uninstall the IBM Java build you currently have installed.

Error Loading servlet in iplanet app server NotSerializableException

I am trying to load a servlet and everything runs correct but when i try to connect to the database of the system I get java.io.NotSerializableException. I am not passing any data through rmi or writing any data to the system, but still get this message. The wierd thing is that this runs without a problem on my windows, running JRun, and linux, running tomcat, machine but give me this message on my unix machine running Iplanet, does anyone have any clue to what would cause such an error, when everything works on all the other machines but the unix one.
Thanks.

I am not sure what that realy means???
Here is the error
[01/Apr/2002 16:34:59:2] error: Exception:
SERVLET-IO_exception: IOException occurred
Exception Stack Trace:
java.io.NotSerializableException:
org.meinds.forum.database.DbAuthorization
at
at java.lang.Throwable.fillInStackTrace(Native
ative Method)
at
at java.lang.Throwable.fillInStackTrace(Compiled
piled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.io.IOException.<init>(Compiled Code)
at
at java.io.ObjectStreamException.<init>(Compiled
piled Code)
at
at
at java.io.NotSerializableException.<init>(Compiled
ed Code)
at
at
at java.io.ObjectOutputStream.outputObject(Compiled
ed Code)
at
at
at java.io.ObjectOutputStream.writeObject(Compiled
ed Code)
at
at
at
at
java.io.ObjectOutputStream.outputClassFields(Compiled
Code)
at
at
at
at
java.io.ObjectOutputStream.defaultWriteObject(Compiled
Code)
at
at
at java.io.ObjectOutputStream.outputObject(Compiled
ed Code)
at
at
at java.io.ObjectOutputStream.writeObject(Compiled
ed Code)
at
at
at
at
com.netscape.server.servlet.platformhttp.PlatformNASSe
ssion.putMemberValue(Compiled Code)
at
at
at
at
com.netscape.server.servlet.platformhttp.PlatformNASSe
ssion.saveSession(Compiled Code)
at
at
at
at
com.netscape.server.servlet.platformhttp.PlatformNASSe
ssion.decrementActiveRequestCount(Compiled Code)
at
at
at
at
com.netscape.server.servlet.platformhttp.PlatformHttpS
ervletRequest.releaseSession(Compiled Code)
at
at
at
at
com.netscape.server.servlet.servletrunner.ServletRunne
r.execute(Compiled Code)
at
at
at com.kivasoft.applogic.AppLogic.execute(Compiled
ed Code)
at
at
at com.kivasoft.applogic.AppLogic.execute(Compiled
ed Code)
at com.kivasoft.thread.ThreadBasic.run(Native
n(Native Method)
at com.kivasoft.thread.ThreadBasic.run(Native
n(Native Method)
at com.kivasoft.thread.ThreadBasic.run(Native
n(Native Method)
at com.kivasoft.thread.ThreadBasic.run(Native
n(Native Method)
at
at com.kivasoft.thread.ThreadBasic.run(Compiled
piled Code)
at java.lang.Thread.run(Compiled Code)

Error occurs when deploy my App to iPhone OS2

Hi, I am a newbee in iPhone development.
I have met a problem when deploy my simple application to iPhone OS2.0
I create my app via XCode, by using the framework in iPhone SDK.(The SDK is the latest version, I downloaded several days ago)
After I succeed in deploying the application into the iPhone simulator,
I try to deploy my application to a real iPhone OS2.0
I know I need sign the binary before deployment,
so I create a certificate named "Test1" via "Keychain Access".
Then I add a "New Run Script Build Phase", contains the statement.
CODESIGN_ALLOCATE=/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/codes ign_allocate codesign -s Test1 -f ${TARGET_BUILD_DIR}/${EXECUTABLE_FOLDER_PATH}/${EXECUTABLE_NAME}
Then switch the project to iPhone Device / Release Version.
Build, no error
When deploying to iPhone, I got error,
Here is the detail from Console .
Mon Aug 25 11:50:14 unknown securityd[77] <Error>: mobile_installat[85] SecItemCopyMatching: missing entitlement
Mon Aug 25 11:50:14 unknown mobile_installation_proxy[85] <Error>: verify_executable: Could not validate signature: e8008015
Mon Aug 25 11:50:14 unknown mobile_installation_proxy[85] <Error>: preflight_application_install: Could not verify /var/tmp/install_staging.WF8R/Test1.app/Test1
Mon Aug 25 11:50:14 unknown mobile_installation_proxy[85] <Error>: install_application: Could not preflight application install
Mon Aug 25 11:50:14 unknown mobile_installation_proxy[85] <Error>: handle_install: Installation failed
Mon Aug 25 11:50:49 unknown afcd[92] <Error>: user mobile has uid 501
Can anybody help me?
Is it necessary to pay $99 at http://developer.apple.com/iphone/program/apply.html?
Is there any article tell me how to deploy step by step?
Thank you very much

Yes, it is necesery to pay the 99 dollars.
For that money you have access to an internet suite that allows you to create certificates.
These certificates are needed to test your software on the real device as well as deploy the software through app store

Error occur when installing iPlanet App server 6.0 SP2

Similar Messages

Maybe you are looking for