Error occur while doing Determination the dep. area in the asset class

Hi All
Query about FI - AA
when I m trying to do determine depreciation area in the asset class with following path
Path in IMG
FA- AA- Valuation-- Determine depreciation area in the asset class
By following above path and my Asset class as soon as I select my Asset class and click on depreciation area Tab at left side I m heading with below error:
*"Contact your system administrator (Table error)"*
I don't have De.area 02 in my chart of depreciation and I don't want to maintain it. I just want to maintain Area 01 and 15
expecting expert opinion and feed back,
Thnx
B

Hi,
Please select the Depreciation Area, which you don't want to maintain for depreciation.
And delete the selected depreciation areas.
Thanks & Regards,
S. Umamageshwaran

Similar Messages

A fatal error occurred while creating an SSL client credential. The internal error state is 10011.

Need help. I have my pilot lync 2013 pool up (in coexistence with 2010 production environment) and can log into Lync 2013 environment with a lync 2010 client but am not able to with a lync 2013 client. It just prompts for password but will not
take it. I'm sseeing this on my front end server multiple times:
A fatal error occurred while creating an SSL client credential. The internal error state is 10011.
Came across this http://www.logicspot.net/index.php?id=50 and tried disabling TLS 1.2, which I did and verified but yet the issue still exists.
All my certs are good coming from internal CA. My signin logs show below but keep in mind, this works just fine if using a 2010 lync client to my lync 2013 servers. Issue only occurs when trying to connect using a lync 2013 client.
1 Login: FAIL (hr = 0x1)
this request needs authentication, trying webticket from: https://domain.com/WebTicket/WebTicketService.svc
1.1 Get-NewWebTicket: FAIL (hr = 0x1)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
1.1.1 ExecuteWithMetadataInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.2 ExecuteWithWindowsOrNoAuthInternal: PASS
1.1.3 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.4 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Discovery task(0A4FF830) sent to URL http://domain.com completed with hr=0x80f10045
1.1.5 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.6 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
Rich

Hi,
Please check the server role and Web Services for Internet Information Services (IIS) are set correctly.
For the detailed IIS configuration, please check:
http://technet.microsoft.com/en-us/library/gg412871.aspx
As Lync client 2013 attempt to query in order to perform autodiscover of the Lync registration server. First
lyncdiscoverinternal.<sipdomain> Host (A) record and then
lyncdiscover.<sipdomain> Host (A) record. If neither of these records are resolvable then the legacy DNS SRV and A record fall-back process is used. So make sure you have add the two A record in DNS server.
More details:
http://blog.schertz.name/2012/12/lync-2013-client-autodiscover/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

A fatal error occurred while creating an SSL client credential. The internal error state is 10013.

Hi All
I am seeing the below event appearing in the system log on all our Exchange 2013 servers regularly. I am not seeing any connectivity issues between any clients and the servers and no other issues have been reported at this stage.
Log Name:      System
Source:        Schannel
Date:          10/04/2015 9:21:17 AM
Event ID:      36871
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:
Description:
A fatal error occurred while creating an SSL client credential. The internal error state is 10013.
I am not sure if its related to the public certificate we are using or if its related to the one provided from the local CA.I have searched and found other links that suggest it could be related to SSL versions being disabled etc.
All servers are running Windows 2012 R2 Datacenter. The Exchange CAS servers do also sit behind a pair of F5 BIG IP Load Balancers
Any suggestions on where to look?
Thanks

Hi,
According to the event log, the issue is related to Schannel instead of Exchange.
Please try the following steps:
1.In Control Panel, click Administrative Tools, and then double-click Local Security Policy.
2.In Local Security Settings, expand Local Policies, and then click Security Options.
3.Under Policy in the right pane, double-click System cryptography: Use FIPS compliant algorithms for encryption, hashing, and signing, and then click Enabled.
4. Ran gpupdate /force
If it doesn’t work, please go to C:\ProgramData\Microsoft\Crypto\RSA and grant "Network Services" Read permission to "MachineKeys" folder. Then restart server to have a try.
Here is a similar thread for your reference:
https://social.technet.microsoft.com/Forums/lync/en-US/e70a8dbc-6f48-4fde-a93b-783554344822/a-fatal-error-occurred-when-attempting-to-access-the-ssl-client-credential-private-key?forum=ocscertificates
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support

HT3275 I keep getting the "Unable to complete backup. An error occurred while copying files to backup volume. The solution on the website is try try again. Its been trying for 5 days now. Now what? Obviously something else needs to be done.

I'm using an airport extreme and I keep getting the "Unable to complete backup. An error occurred while copying files to backup volume. The solution on the website is try try again. Its been trying for 5 days now. Now what? Obviously something else needs to be done.

Verify the backup.
Is this TM you are using? TM to airport extreme connected hard disk are known to be fragile at best.
A5 http://pondini.org/TM/Troubleshooting.html
make sure the disk is available and online..
But if it is not working.. then you will have to wipe and start again.
http://pondini.org/TM/Airport.html
If this is not TM then also verify the source disk.

An error occurred while releasing interface Loopback Pseudo-Interface 1 : The system cannot find the file specified

Hello All
I have TMG server installed on windows 2008 R2 64x with 3 network adaptor (Lan,Premiter and External), but for some reason the clients on premiter Network cant get ip addresses from dhcp which located on LAN. i have done
ipconfig /release
ipconfig /flushdns
ipconfig /renew
but no success...... also uninstalled premiter network adaptor and reinstall network adaptor still no success.....getting this error.
An error occurred while releasing interface Loopback Pseudo-Interface 1 : The system cannot find the file specified
by the way My Lab is based on Hyper-v
any help would be much greatfull
thanks

Hi,
Have you checked the TMG logging?
You could try the troubleshooting steps in the thread below.
http://answers.microsoft.com/en-us/windows/forum/windows_vista-networking/an-error-occurred-while-releasing-interface/4261cacb-e924-4d74-a349-4f3b898c27a9
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

No Suitable Items found for PO (error M8035) while doing MIRO against service PO for the 1st time in the Company Code

Hi
I am encountering the error M8035 (" No Suitable Items found for PO ") while I am doing MIRO for the 1st time against service POs (item cat - D) in a company code.
in OMSY the period opened for the company code is : Current 06 2014 previous 05 2014
This was done because Go Live date for the new company code is 01.06.2014.
I am doing test in the test client now.
I have created a vendor on today's date
I have created a service PO on today's date (GR, GR Bsd IV, IR, Serv Bsd IV - these indicators are marked in the PO)
I have created service entry sheet on today's date (acc assignment - K, G/L a/c was determined from the Material Group maintained in the PO)
I have accepted the service entry sheet on 04.05.2014 (FI doc posted against the matl doc - KBS to WRX on 04.05.2014)
I am trying to do the MIRO in the same company code on 04.05.2014.
While I am putting the PO and its line item in MIRO item and pressing enter system shows the above info msg and nothings is appearing in MIRO item.
I have tried to do MIRO against service entry sheet also - same things happened.
I have tried selecting Goods Service Item+planned del cost in MIRO - nothing changed.
I have tried posting MIRO against a non service PO (acc assgnment K, Item cat - BLANK) after doing MIGO in the same company code in the same date- PO is appearing in that case.
FI people are able to post FB60 manually for the vendor I am using in the PO - so there is no problem in the vendor also.
I have gone through the scn post related with the topic, unfortunately none of them solved my problem.
Please help
Thanks
Sanjib...

Can you post a screen shot for PO history ?
Regards
Dev

Error occured while doing depreciation for an asset

Hi,
I could running the depreciation for an asset in AFAB t-code.
The msg is ""Testrun Completed successfully" and "No document were created for this run". I have purchased the asset for the month of April and wanted to run the depreciation for that month.
Please Advice.
Thanks
Bnoy

Dear Bnoy,
If you look at the message itself saying Testrun completed successfully. So mean you are runnning depreciation posting program in TEST RUN mode, so it is understood not to post any document in system in real time and if any error occurs must show in simulation mode.
If you dont found any error in TEST RUN, next running time remove TEST RUN and execute the same again, here at this time system will post the document and asset explorer will get updated with posted values.
I hope this will help you to understand depreciation posting functionality, and you will be able to overcome the facing issue.
If you have any doubts feel free to share, you are welcome !
Regards,
Pankaj A Bhalerao.

"An error occurred while trying to add a frame to the movie" (-2014)

Oh c'mon. I just got everything installed. First time i try to use it, and get an error. Anyone help? I tried researchin this but didn't really get concrete answers. Plus, if i try to import livetype file unrendered from fce, fce quits unexpectedly.

Please, any ideas? i have a intel core 2 duo, 10.6.2 macbook, and PCI graphics card. Plenty of memory. Livetype version is 1.2.1. Is this type not compatible?

What does "Error 10" mean? "An error occurred while loading your project. 10"

Does anyone know what "Error 10" means? For the first time, I'm getting a message that says, "An error occurred while loading your project. 10". I'm getting this message when I try to open a project that I created yesterday.
I'm using Adobe Premiere 6 on a Windows 7 machine. I have over 20 gigs of open space on the drive with all the project and support files. And this machine with 2 gigs of RAM never has a problem opening other similar Premeire project files with even more still images plugged in.
All of my Premiere project files have always opened with no problem. A similar file that this project file was created from with all the same base elements still opens with no problem.
This file almost finishes the "Loading Project - checking files..." process, but then I get the error message.
I had also saved a duplicate backup file for the project in question and it will not open either, so I believe that rules out a corrupt file... it is only this one project that I created yesterday that will not open. This project file is only about 5.7 megabytes in size.
This file has many still images plugged in to it, but all the same images are plugged in to another base file that still opens correctly.
I've also tried closing all other apps to save memory but I still get the error. I've also tried opening this problem file from within the application and I still get the same error message.
I read some troubleshooting information on the Adobe website about files that give error messages that will not open and it recommended adjusting the size of the virtual memory paging file in the system settings to twice the amount of RAM that is installed instead of being on the automatic setting, so I followed the instruction verbatim and restarted my machine and I still get the error message.
I've also read other troubleshooting info on the Adobe site that recommends to "delete the application preferences file" and "recreate the plugin cache file", but I'm not sure if "Error 10" indicates that those things are the correct procedures to use.
I could re-create this project file, but it has many tricky cutting and motion setting edits that will be difficult to reproduce and it took me a full day to create this project file.
Also, yesterday before initially closing this file, I was able to successfully render a test version to an AVI file and that video file plays fine, but neither the original project file nor the duplicate will open... I'm always getting the "An error occurred while loading your project. 10" after the file almost finishes the "Loading Project - checking files..." process... it almost finishes opening but then I get the error message.
Thanks for any input on this problem. You can see the error message screenshot below.
digi

Thanks Bill... me too.
After writing to Dennis Radeke on an Adobe.com blog about this and getting his very limited response, I wrote to him quoting something I read on the wiki page that you sent me the link to...
Adobe blog:
http://http://blogs.adobe.com/genesisproject/2009/11/having_weird_behavior_with_an.html#co mment-2701
Wiki page link that you gave me:
http://premierepro.wikia.com/wiki/FAQ:How_do_I_recover_a_corrupt_project%3F
Here's what my response today was...
Thanks for your reply DR.
My old version of Premiere 6 works perfectly on Windows 7. I’ve created over a thousand different Premiere project files on this 5 year-old PC that was updated to Windows 7 last year.
All of my other Premiere 6 files open and maintain their original editability and all the features in this ancient version of Premiere work very well.
I own and use mostly Mac machines but I have one 5 year-old PC with a 160 gig hard drive with Windows 7 that I run Premiere 6 on because it’s a thousand dollar program that I had from 10 years ago that I didn’t want to repurchase. Buying a newer PC 5 years ago was far less expensive than buying a new copy of Premiere. Some people seem to think, “Wow, just buy a new version of the software for a thousand dollars and a new computer with a 5 Terabyte hard drive.”, but that isn’t always the reality of some peoples financial situation.
With 20 gigs of open HD space, all of my previous, even more complex Premiere 6 files still open and edit just fine. It is only this one file that I created Thursday that won’t re-open after closing it for the first time. Since the backup copy of that file won’t open either, and all the support files open, play and work in other previous project files, I’m thinking that there is some glitch that happened when saving this file that is corrupting it now, making it unable to be re-opened.
Based on prior advice on multiple topics about Premiere 6 from people on the Adobe forum who use only newer versions of Premiere, most information that applies to the brand new Premiere Pro CS5 still seems to apply to the old Premiere 6.
I found that holding down Shift-Option while opening Premiere 6 trashes the preferences file. This became my work around since I can’t locate the preferences file based on your path noted (in your blog) nor via the other prefs file path published on the Adobe website.
But unfortunately, trashing the prefs file, resetting the plugin cache file, increasing the virtual memory paging file size, importing the problem project file in to a new project, nor anything else is working to allow this file to open.
Now I’m looking in to XML:Wrench to see if that can find the corruption in this file, but I’ve had a malware warning from one download source and the xmlwrench.com website says their download is only a demo version, but no price is listed… this seems somewhat strange and possibly deceptive.
But I read something on an Premiere Pro wiki page , quoted below, at this URL, that seems to be pertinent, and though my version of Premiere may be ancient, it seems that, according to this user’s concerns, Adobe is still having problems with current versions of Adobe software creating corrupt files…
http://premierepro.wikia.com/wiki/FAQ:How_do_I_recover_a_corrupt_project%3F
QUOTE:
“Can someone please advise – why on EARTH we should have to download XML Wrench and manually fix a corrupt Adobe project??? This is something common to all the Adobe “Support” forums on issues like this, and the many others that plague Adobe’s product (and I’m not being a mindless troll – I’ve been forced to use it for years so I do know the usability and other issues it has): it seems that people are excited because they’ve found a “fix” (which is more like a work-around) – purely because they’re understandably ecstatic that all their hard work isn’t comPLETEly lost.
However, Adobe should be making sure their product isn’t so buggy! This issue should be fixed (as just one example). Adobe should be finding out what causes the corruption in the first place and fixing it. And whether it’s some other codec on the system that’s caused it is no excuse – their software should have better error management built into it. I’ve seen other issues where an Adobe support representative has happily replied: “oh, that’s a known issue since version [3 versions back] – don’t worry, most users are aware of the work around for it: just select and move all of the items in your timeline each time you open the project and you’ll be fine!”
I’m sorry to rant on – but can some other users please explain the above to me? (i.e. why aren’t more people annoyed about this and complaining to Adobe to fix these things).”
UNQUOTE
All of this coming from an experienced user of Adobe products complaining about needing XML:Wrench to fix corrupt Adobe files seems relevant.
In addition, why does no one, including the Adobe knowledge base, have any info about what “An error occurred while loading your project. 10″ means?… why isn’t there a database that identifies Adobe error numbers by the simple number itself? The only info I was able to find identifying “Error 10″ on the Adobe site was a software installation error, not a project loading error.
Now I find myself chasing a clean download of XML:Wrench in order to hopefully fix this corrupt file. Whether I’m using Premiere 6 on a 160 gig hard drive with 20 gigs of open space or Premiere Pro CS5 on a 5 Terabyte hard drive with 3 Terabytes of open space, the problems, according to other users, seem to be the same as ever with corrupt Adobe Premiere files, based on what I’ve been reading across the internet.

An error occured while attempting to perform the operation.

Hi
I'm getting the following error message in my disco plus report.
"An error occured while attempting to perform this action. The operation did not complete successfully.
Extra Internal info:
(OLException
Cause:OLException {
Code: OLCmRefException::eNullRef
Args: OLCmRefException::eNullRef
I have searched the forum but have found no usefull information for me.
The problem occured when I added a calculation to woorkbook that was working perfectly fine before. Now I can't even remove any item or calculation (or anything) from the worksheet.
I then edited the calculation to just show "1" instead which allowed me to remove that certain calculation, but I can still not remove any item.
Please ask if more details are needed.
What can have caused this problem, and is there a way to solve it? Do I have to redo the entire report?
BR
Robert

Robert,
We encountered this issue with our 10.1.2.54.25 installation on a Solaris OS. We are currently at CP3. We have tried CP4, 5, 6 and 7. No resolution. Oracle has replicated our issue assigned a bug # and say that they have found a fix but it will not be made available until the release of 10.1.2.3 CP2. We have requested a one-off patch for 10.1.2.54.25 CP7. They are currently thinking about it. We have been hung up since Feb. '08 and not be able to resolve any bugs because of this problem.
Jerre

Sharepoint 2010, InfoPath 2010 with Custom Workflow. Error Message: InfoPath cannot submit the form. An error occured while form was submitted...

I have created an InfoPath form that submits to a Sharepoint library with custom workflow attached. The workflow is initiated when the user submits the form. An email is sent to the supervisor who clicks the "Encoded Absolute URL" and approved
the form via the emailed form. Then, based on certain criteria the form is either emailed to the VP or the workflow is complete. The VP is sent an email and clicks the "Encoded Absolute URL" and sumbits the form via the emailed form. This is
how I would like it to work. The reality is, the form submits and is emailed to the supervisor and the supervisor is able to approve but when the form is sumbitted I get an error. The error is "InfoPath cannot submit the form. An error occured while
this form was being submitted. The form cannot be submitted to the following location: <URL> The file <URL> is checked out for editing by <me> The operation completed successfully." The operation did not complete successfully and it
is not checked out. I have read in previous posts that the file is locked. Since I am in the testing faze of the project there is no one else using the form. I have waited 24 hours and the lock has not been released. Please help!!! My deadline is growing short.

I ran into your post while having a similar issue. I don't have a 'full' fix for you, but I noticed at least in our case if you made sure you opened the Infopath form through the browser instead of the client Infopath program (use the drop-down menu
and open in browser) the error doesn't occur. Hope that helps some....

AN ERROR OCCURRED WHILE OBTAINING DATABASE SCHEMAS sqlserver stored proc

I have used the documented Oracle procedures for building the necessary wsdl and xsd files for a sql server 2000 and 2005 stored proc. The wsdl files and xsd are generated and incorporated per the tech doc. The process was working for a while and now, when we try to access the dbadapter partner link created using the wsd, we get the following error:
"AN ERROR OCCURRED WHILE OBTAINING DATABASE SCHEMAS. VERIFY THAT THE DATABASE CONNECTION IS VALID AND IS SUPPORTED."
We have tried getting this corrected by using each of the specified jar libraries as part of the project:
sqljdbc.jar
msutil.jar
msbase.jar
mssqlserver.jar
Still, no solution.
Anybody have this happen? Fixes? Help......

If you used a command-line utility to generate your WSDL and XSD that would indicate that your JDev version does not support SQL Server so you can't use the Adapter Configuration Wizard to create partner links that execute stored procedures on SQL Server. Creating the initial partner link using the generated WSDL and XSD file will work fine, but if you try to edit that partner link in JDev it won't work if your JDev doesn't support SQL Server. You'll have to regenerate the WSDL and XSD as needed and recreate the partner link.

Web Analysis 9.3.1: Error occured while opening document. Document ID = {0}

Hi Experts,
I am having an issue while opening a web analysis dashboard report. When I try opening it, web analysis runs for about 15 mins & then throws following error:
Error occured while opening document. Document ID = {0}
The report opens with its header having company log & two buttons, but data grid remains empty.
The source of Grid is Essbase. The tunning parameters in Essbase.cfg file are in place.
Could anyone please through more observation on this issue. Let me know if any further information is needed!.
Kindly suggest me any way to resolve it.
Thanks,
Krishan

The isapi (if you use one) timeout setting might be smaller than the time essbase needs to retrieve te information.
but most probably the analysis applicationserver jre heapsize is either to small or needs to much time to allocate it. Be sure to increase heapsize and set max equal to min (try 800mb, if your hardware has that resource)

WebAnalysis Error: Error occured while opening document. Document ID = {0}

Hi Experts,
I am having an issue while opening a web analysis dashboard report. When I try opening it, web analysis runs for about 15 mins & then throws following error:
Error occured while opening document. Document ID = {0}
The report opens with its header having company log & two buttons, but data grid remains empty.
Kindly suggest me any way to resolve it.
Thanks,
Krishan

Hi Natesh,
Thanks for your reply to my query posted in this forum. Please find my inline answers between asterisk to your questions:
Whatz the source of your Grid? Relational SQL Query (OR) A spreadsheet with Essbase database connection file?
* Yes, the source is Essbase.*
If source is Essbase, it seems- Outline might've got altered when you're trying to refresh the report.
* The outline was in tandem when we tried running this report in WebAnalysis. This outline & WebAnalysis report which is in Dev Server is a replica of the one in Test Server where it runs fine. *
If source is based on a Relational SQL query, chances are that- Query is no longer valid.
* NA as this statement is NOT applicable to our source.*
If it's Essbase, it's also likely that- It ran out of time while fetching the data from Essbase. You may try playing around with the parameters in Essbase.cfg file.
* This might be one of the causes, but I double checked the all the tunning parameters in Essbase.cfg file in place.*
Could you please through more observation on this issue. Let me know if any further information is needed!.
Thanks for your time.
Regards,
Krishan
Edited by: user10475612 on Nov 8, 2009 1:07 PM
Edited by: user10475612 on Nov 8, 2009 1:09 PM
Edited by: user10475612 on Nov 8, 2009 1:12 PM

An error occurred while creating a Page Server subprocess.

I am using XI R2 SP5 on solaris.
When we try to view any report on demand or schedule any report that has a parameter, the following error comes back:
An error occurred while creating a Page Server subprocess.
I have tried restarting the services. I have tried creating a new page server. It behaves the same way. In other online forms, I've seen with this error message, people have talked about fixing it by installing SP2 or by uninstalling and reinstalling everything. We're at SP5, so we should have anything that was fixed at SP2. An uninstall and then reinstall would be a nightmare given the amount of use on this system.
Can anyone recommend anything at all? I'm about to have our unix admins reboot the server, but that is really nothing more than a stab in the dark. I saw someone else in an online posting claim that a reboot fixed the problem, but I've only seen that once.

checked this SAP Note?
1204013 - Error: "The Page Server is unable to create a child process" when viewing a Crystal report in InfoView on Solaris
Symptom
When trying to view a Crystal report in BusinessObjects XI Release 2 InfoView on Solaris, the following error message appears:
"The Page Server is unable to create a child process"
In the syslogs, you see the following error messages:
"An error occurred while creating a Page Server subprocess."
"The function PEOpenEngineEx failed. Reason: Report engine not opened."
"Internal error for dll procreport."
"Unable to load dll procreport."
"Internal Job Server error."
Cause
The following file in the MainWin registry has become corrupt:
bobje/enterprise115/solaris_sparc/crpe/mw/registry/core_data/servername/.mw/hklm_sunos.bin
This has become corrupt due to the web application server running under a different account than the BusinessObjects Enterprise applications.
Resolution
Restore the hklm_sunos.bin file using a backup of that file. The backup file must be from before the corruption occurred. Also ensure that your web application server and BusinessObjects Applications are running under the same user account.

Error occur while doing Determination the dep. area in the asset class

Similar Messages

Maybe you are looking for