Error occur while interface labview with power and harmonic analyser

hello,
i done a project to test coreloss of motor. i our project we met some some trouble while interfacing labview software with navonip power and harmonic analyser through rs 232 communiation.i generate some error msg when i am using *IDHN? command to communicate with this hardware...... so i need ur technical support

You will have to supply more info on the error(s) you encounter. Is there a command that does work as expected?
Regards,
André
Using whatever version of LV the customer requires. (LV5.1-LV2012) (www.carya.nl)

Similar Messages

I get the message "an error occurred while loading your favorite themes" and my persona rotator won't work. Please help?

I usually use the Persona Rotator using My Favorites as its themes to rotate. Lastely my rotater has not been working. I click on Tools, then Personas, then My Favorites and am asked to sign in to use my favorites with the Rotator. I follow all these steps and all seems to go fine, except my Persona Rotator does not rotate. Again I click on Tools, Personas, My Favorites and there is a message saying "an error occurred while loading your favorite themes" and therefore won't work. I don't know what the problem is or even exactly when it started, but it doesn't work and I'm most disappointed. Please fix or help me to fix it so I can enjoy my rotating themes again.

In order to switch to another persona that you had previously installed, do the following:
#Go to ''Tools'' and click ''Add-ons'' (or click the Firefox button at the top left and click ''Add-ons'').
#Switch to the ''Appearance'' tab. You should find your previously used personas in the list.
#Find the one you want to use and click the ''Enable'' button.
To uninstall the other ones you can click the ''Remove'' button on them and they'll be uninstalled instantly.

I am trying to sync iphone 5 to itunes but it says "iTunes could not connect to the iphone as an error occured while reading from the device " and the iphone is not seen on itunes........

i am trying to sync iphone 5 to itunes but it says "iTunes could not connect to the iphone as an error occured while reading from the device " and the iphone is not seen on itunes........

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. And then reboot your computer.
See if that fixes your problem.

Error occurred while starting application with EP 6.0

Hi all,
when deploy an application, I obtain this error:
===========================================================================
Deployment started Thu May 21 16:50:58 CEST 2009
===========================================================================
Starting Deployment of fgp_ita18_rassegne_iv_wsrsgst
Finished with warnings: development component 'fgp_ita18_rassegne_iv_wsrsgst'/'ferrero.com'/'local'/'20090521121654'/'0':Caught exception during application startup from SAP J2EE Engine's deploy service:java.rmi.RemoteException: Error occurred while starting application ferrero.com/fgp_ita18_rassegne_iv_wsrsgst and wait. Reason: Clusterwide exception: server ID 772336550:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: *Application ferrero.com/fgpita18_rassegne_iv_wsrsgst cannot be started. Reason: it has hard reference to resource FGP_RSGSTMP with type javax.sql.DataSource, which is not active on the server*._ at com.sap.engine.services.deploy.server.ReferenceResolver.processUsageOfComponent(ReferenceResolver.java:533) at com.sap.engine.services.deploy.server.ReferenceResolver.beforeStartingApplication(ReferenceResolver.java:346) at com.sap.engine.services.deploy.server.application.StartTransaction.beginCommon(StartTransaction.java:162) at com.sap.engine.services.deploy.server.application.StartTransaction.beginLocal(StartTransaction.java:141) at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:356) at com.sap.engine.services.deploy.server.application.ParallelAdapter.runMe(ParallelAdapter.java:95) at com.sap.engine.services.deploy.server.application.ParallelAdapter$1.run(ParallelAdapter.java:233) at com.sap.engine.frame.core.thread.Task.run(Task.java:64) at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:83) at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:156)server ID 772336551:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Application ferrero.com/fgp_ita18_rassegne_iv_wsrsgst cannot be started. Reason: it has hard reference to resource FGP_RSGSTMP with type javax.sql.DataSource, which is not active on the server. at com.sap.engine.services.deploy.server.ReferenceResolver.processUsageOfComponent(ReferenceResolver.java:533) at com.sap.engine.services.deploy.server.ReferenceResolver.beforeStartingApplication(ReferenceResolver.java:346) at com.sap.engine.services.deploy.server.application.StartTransaction.beginCommon(StartTransaction.java:162) at com.sap.engine.services.deploy.server.application.StartTransaction.beginLocal(StartTransaction.java:141) at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:356) at com.sap.engine.services.deploy.server.application.ParallelAdapter.runMe(ParallelAdapter.java:95) at com.sap.engine.services.deploy.server.application.ParallelAdapter$1.run(ParallelAdapter.java:233) at com.sap.engine.frame.core.thread.Task.run(Task.java:64) at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:83) at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:156)server ID 712797150:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Application ferrero.com/fgp_ita18_rassegne_iv_wsrsgst cannot be started. Reason: it has hard reference to resource FGP_RSGSTMP with type javax.sql.DataSource, which is not active on the server. at com.sap.engine.services.deploy.server.ReferenceResolver.processUsageOfComponent(ReferenceResolver.java:533) at com.sap.engine.services.deploy.server.ReferenceResolver.beforeStartingApplication(ReferenceResolver.java:346) at com.sap.engine.services.deploy.server.application.StartTransaction.beginCommon(StartTransaction.java:162) at com.sap.engine.services.deploy.server.application.StartTransaction.beginLocal(StartTransaction.java:141) at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:356) at com.sap.engine.services.deploy.server.application.ParallelAdapter.runMe(ParallelAdapter.java:95) at com.sap.engine.services.deploy.server.application.ParallelAdapter$1.run(ParallelAdapter.java:233) at com.sap.engine.frame.core.thread.Task.run(Task.java:64) at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:83) at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:156)server ID 712797151:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Application ferrero.com/fgp_ita18_rassegne_iv_wsrsgst cannot be started. Reason: it has hard reference to resource FGP_RSGSTMP with type javax.sql.DataSource, which is not active on the server. at com.sap.engine.services.deploy.server.ReferenceResolver.processUsageOfComponent(ReferenceResolver.java:533) at com.sap.engine.services.deploy.server.ReferenceResolver.beforeStartingApplication(ReferenceResolver.java:346) at com.sap.engine.services.deploy.server.application.StartTransaction.beginCommon(StartTransaction.java:162) at com.sap.engine.services.deploy.server.application.StartTransaction.begin(StartTransaction.java:136) at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292) at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:342) at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:126) at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:245) at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4712) at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4617) at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4590) at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1163) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:319) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:200) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(AccessController.java:219) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176) (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment of fgp_ita18_rassegne_iv_wsrsgst finished with Warning (Duration 98744 ms)
===========================================================================
Deployment ended Thu May 21 16:52:39 CEST 2009

As per as i know this is your custom patch but not delivered by sap.Is the development done fine because it is taking as reference as some resource mentioned in the log and till that is active this deployment will not go fine.
Have you some other deployment that would be activating that resource and then this patch should be done.
Thanks
Rishi Abrol

An Error occurred while running detection with sharepoint 2013 SP1

hi,
I am trying to install SP1 for MS SharePoint 2013. after starting the wizard am getting "An Error occurred while running detection" error. I have ran SharePoint config wizard to troubleshoot it. still same problem persist.
my current SP build version is 15.0.4551.1508. I think SP1 is applicable on SP build versionn15.0.4569.1000.
How I can upgrade 15.0.4551.1508 to 15.0.4569.1000
any have idea on how to resolve or troubleshoot this issue ?
Thanks

HI NIkhil,this should be because you miss some of the previous versions in your farm.please try below to resolve the issue
http://expertsharepoint.blogspot.de/2013/10/the-excepted-version-of-product-was-not.html
The version 15.0.4551.1508 is DEC-CU 2013 to upgrade 15.0.4569.1000(SP1).
TRy download the second release of SP1 released by MS and install.
http://expertsharepoint.blogspot.de/2014/06/service-pack1-for-sharepoint-2013.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

Error Occuring While Processing Data With DIAdem 8.1Exception EAccessViolation in module ntdll.dll at 000111DE. Access violation at address 7C9111DE in module 'ntdll.dll". Read address 37363430

Hello,
We are having an issue running Diadem 8.1 on a new HP XW 9400 with Windows XP SP2. 3 errors have been occuring with frequent crashes, they are:
1) "1Exception EAccessViolation in module ntdll.dll at 000111DE. Access violation at address 7C9111DE in module 'ntdll.dll". Read address 37363430.
2) The instruction at "0x7c9111de" referenced memory at "0x352e302d". The memory could not be "read".
3) ---Error--- DIAdem
Error in Autosequence - processing in line: 74 (IARV_VAR_GET)
Runtime Error while executing command "Iarv2Txt$ := FR(T9,L1)"
Error type: ACCESS VIOLATION
Error address: 000101DE
Module name:ntdll.dll
We are using the same scripts and version 8.1 on a variety of Dell desktop computers (W2K and XP SP2) without any issue, looking for suggestions as this affects no other software on the HP XW 9400 other than DIAdem. Appreciate any suggestions.
Message Edited by swillh on 06-25-2007 08:55 AM

Christian,
I will answer your questions in the text below. Thanks for your help.
Hi swillh,
I also would like to help you.
Unfortunately, The reported access violation in the central Windows ntdll.dll is very unspecific.
May be the following questions will help you to provide me more info.
1. You mentioned that the aut's and - I think - also the accessed text file reside on a server.
Is there a stable network connection?
The server can sometimes be a little slow but the connection is good. This computer is using the same connection that the prior computer utilized without issue.
Are the files accessed by multiple clients simultaneously?
It is possible that more than one computer can be accessing the same file, but again, this has never been an issue. We are reading the files only, not writing to them.
The processing routines we are running have used for over 5 years without any issues until adding this computer.
Is the text file read by one client while another client is writing the same file?
No, files are "read only"
2. Have you already tested opening the file with the FileOpen command before calling FR?
Yes
Do you see any chance to convert the aut to a vbs file? This gives you more alternatives in accessing text files.
3. What do you mean with "processing ATD's with 30 or more channels of data"? Where is the relation between ATD files and data channels?
Processing Crash Dummy data with file sets low in channel count (15 channels) result in successful processing without any crashes or access errors. When processing dummies with more than 20 channels we sometimes encounter these issues. The higher channel count may be the only common factor I can find in these faults.
Steve
Message Edited by swillh on 07-09-2007 08:44 AM

"An error occurred while updating the configuration"

I recieved an Apple Airport Base Station in the mail today. I got it second hand, and I performed a hard-reset since I didn't have the password and stuff. I wanted to update it properly before I started using it.
I have followed the guides in here point by point, but all I get when I am trying to connect with the AirPort Admin Utility is the error in the topic: "An error occurred while updating configuration".
I've been surfing and googling for hours now, and can't seem to find the solution to this.
The Base Station has a model no. M8440, and that's all I know about it. First I thought it was the Snow, then the Graphite and now I don't know. The reason I get confused is because I've read about all these different colored lights.
Here's a description of my Base Station - in case someone recognized it, and can help me identify it:
- It's one of those "UFO's"
- It's all white, with a silver Apple-logo
- It's got three ports: Modem, WAN and LAN
- It's got three lights - ALL WHITE all the time.
I've tried to download firmware - the last I tried was called AirPortFW4.0.9.img - but when I try to run it by clicking it I get the error "The destination folder "AirPort whatever firmware whatever" is on a locked volume.
My computer is a 2,0 HGz MacBook Pro, and int the AirPort Admin Utility the Base Station is said to be V4.0 dev with IP 192.42.249.13 - so it seems to be hard-resat all right...
Please folks...help me out!

I've also encountered the same problem with an older dual ethernet airport.
I first started having problems with the original one about 8 months ago, and after spending a ridiculous three hours on the phone with AppleCare they sent me out a refurbished replacement. That one worked fine for about 5 months, but then started dropping the signal again, before becoming "unfindable". I went through the same processes, (soft reset, then hard reset etc.) which sometimes solved the problem. I eventually I took it to an Apple Store and of course, it worked fine once I got there. Strange thing is, I took it home and it continued working without incident...for a month. When it happened again, I decided to forgo all the the diagnostic work and just take it back to the store. Sure enough, it fixed itself again, then broke again a few weeks later (now).
Unfortunately, I just had knee surgery and can't get down there now, (which was getting ridiculous anyway), so I went through everything again for the first time on the MBP. I ended up getting the "An error occurred while updating the configuration" message, and after reading this thread started up the old TiBook. The reconfig worked on there, but it still isn't visible on either computer. In fact, it then becomes inaccesible even through LAN on the TiBook through either the AirPort Admin or the dropdown, though it did appear on the MBP via AirPort Admin. However, it says the software on the airport cannot be uploaded or changed due to out of date software on my computer, and suggests I go to apple.com/support to update my computer's software, which is already current. It does however say that I may be able to change the settings and so forth, which I was able to do. Unfortunately, it still does not show up anywhere else on either computer, no matter how much I tinker with the settings.
Any ideas? I suppose I'll just stick with built-in ethernet till I am mobile again.
MacBook Pro 15 Intel Duo Core 2.16GHz 2GB/100GB Serial ATA drive@7200rpm Mac OS X (10.4.7) '02 Titanium Powerbook G4 1GHz 1GB/60GB/Superdrive (currently awaiting a new hard drive)

An error occurred while accessing the content repository from JDeveloper

Hello,
I'm using Jdeveloper Studio Edition Version 11.1.1.5.0
I created Content Repository conection, following:
RIDC Socket Type: socket
Server hostname: localhost
Content Server Listener Port: 4444
Executing "Teste Connection" result "Success!"
But, trying connect, I receive:
oracle.webcenter.content.internal.model.rc.AbstractRepositoryLogic listFolder
An error occurred while accessing the content repository.
and when I login to my portal and go to administration page, then I am getting this error
"Messages for this page are listed below.
Could not retrieve members from policy store.
and when I go to services tab then i am getting this error "The Documents service is unavailable.
Error contacting the content repository."
Please help me to resolve this problem.
Thank You,
Muhammad Nasir

can anybody help me to resolve this issue please.

An error occurred while downloading Mountain Lion OS

An error occurred while downloading Mountain Lion OS and can't download it anymore. Please advise on how to resolve this problem. Thank you

I have followed these steps :
- Sign out of the App Store (in the Store menu)
- Quit the App Store
- In Finder - Go>Go to folder... (or Apple-shift-G)
- Paste in the following "~/Library/Caches/com.apple.appstore"
- It will take you to a folder. Delete the whole folder and empty the trash.
- Launch the App Store. Sign in and then reclick the Mountain Lion buy. It won't charge you again.
Then I restart my system in safe mode. And downlad installer again
This time it is installed. And I am really happy

I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer w

I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer working and although upload completes, the URL takes you to a "Forbidden - do not have permission to read this file" page. Lightroom is changing the permissions of each file to 000 instead of 644 for index files and 755 for all others. How can I change the permissions settings in Lightroom?

I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer working and although upload completes, the URL takes you to a "Forbidden - do not have permission to read this file" page. Lightroom is changing the permissions of each file to 000 instead of 644 for index files and 755 for all others. How can I change the permissions settings in Lightroom?

HT201514 Trying to back up Time Machine to My Passport Air external hard drive, which is supposed to be compatible with my iMac and Mountain Lion, but get the message: Unable to complete backup. An error occurred while creating the backup folder. Help!

Hello, I've just bought a Mac compatible Passport Air external hard drive, which is supposed to be compatible with the OS I am using (Mountain Lion) but I keep getting an error message saying Unable to complete backup. An error occurred while creting the backup folder. I've tried all the help suggestions, but nothing with this actual message comes up - it appears to be partititioned correctly etc, so don't know what I'm doing wrong - any help would be greatly appreciated thank you.

Were you not plugged in via USB to begin with?
I would recommend performing some resets just to be on the safe side. Unplug the external HD, and try these steps:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/HT1379

Time Machine will not complete a system backup and terminates with "Unable to complete backup. An error occurred while copying files to the backup volume. This follows a problem when Time machne terminated when the volume was almost full.

On 11/1/2011, Time Machine (TM) terminated with an error message I did not record. I noted that the drive was full and decided to do a separate complete bootable system backup using Carbon Copy Clone (CCC), before clearing the TM volume and trying to start it over clean. Part way through the full system backup CCC put up a message that there was a Physical Problem "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16". That was about the time that TM malfunctioned, so I assumed they were related. After starting CCC over a couple of times, and getting the same error message, I let it go through to completion of the backup, which took three or four hours. I then ran tests using Disk Utility and verified that there was nothing physically wrong with both the internal hard drive and the TM volume. I also erased and reformatted the TM volume. However, every time I started Time Machine, it would record a few GB and terminate with "Unable to complete backup. An error occurred while copying files to the backup volume". I restarted the computer with no change in results. Note that prior to starting the CCC backup, I "Repaired Permissions", "zapped the PRAM" and "re-set the SMC", hoping to have a clean bootable system on the backup. I ran Techtool and no problems were found.
I'm running this on an Intel iMac under 10.5.8 and recording to a 500GB My Passport drive. My hard drive is only about half full at 246 GB. My assessment is that something happened at 16-28-16 on 11/1/2001 to screwup the Backup Directory in the file at "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16". My question is, how do I fix it?
I had just completed writing everything above here, explaining the problems I had been encountering for the past 24 hours. I had the Time Machine window standing open on the desktop where I could see it, having recentlycleared it after the last termination. As I was proofing what I had written, I looked at the window and noted that the clock had started a new run for a full back up, since all prior efforts had failed and the TM volume was empty. As I watched and waited for it to fail again, as it had been doing at about 13 GB, it kept going and going until it just finished a complete backup, about 4.5 hours later, with my having done nothing. Now my question would have to be - what could possiibly have happened to make it perform this way? It will be interesting to see if it continue to operate normally, or if the problem will return, in a later backup run.

jcm21 wrote:
CCC put up a message that there was a Physical Problem "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16"
You should not keep those files for long, and probably shouldn't back them up (if you need them at all -- since you do regular backups, I'm doubtful just how worthwhile that feature is).
"Unable to complete backup. An error occurred while copying files to the backup volume".
One of Apple's maddeningly incomplete messages. Most likely, there's a problem with a file (quite possibly the one CCC didn't like). See #C3 in Time Machine - Troubleshooting for details and instructions on finding and fixing it.
If you continue running the Directory Protection app, be sure to exclude your Time Machine drive from it (as it will just take up lots of room, and won't help repair your backups if there's a problem); and exclude the folders it creates from being backed-up by Time Machine (as they'll create large backups, and you probably can't use the backed-up folders anyway), per #10 in Time Machine - Frequently Asked Questions.

TS1135 Cannot process the Photo Book; it fails always at the very last stage with "error occurred while uploading on of your files. Pls check your network connection and click Retry..." Tried at 12 times and no joy! Can anyone help?

Can anyone help with the Photo Book process? I have tried at least a dozen times and the Photo Book always fails at the very last stage of the process. I ordered Buy Book, it assembles the book and files are transferred until the very last moment... it says " An error occurred while uoloading one of your files. Please check your network connection and click Retry to resend your files." It fails every time, any advice? My server is TalkTalk which may explain everything !! ?? Help.

Boot into Safe Mode, Mac OS X: Starting up in Safe Mode, and order from there.
Also make a PDF file of your book according to this Apple Document, iPhoto '11: Preview a book, card, or calendar before you order or print it, before you order to check for errors. Keep that file to compare with the printed copy when it arrives.
OT

Error message an error occurred while signing in " when I worked with Create PDF and at the signed

Error message "an error occurred while signing in " when I worked with Create PDF and at the signed in status. Please help so that I can continu my work.

Hi Stacy,
Thank you for your attention.
I have been working with Create PFD under normal procedures including
sign-in and several documents had been finished. However, when continued
creating another document the computer took a long time to pprocess and
finally a mesage appeared: "An error occurred while signing in" and stopped
there. I clicked the OK button and start creating again and the same
message appeared once more. I tried to log off and log in again in no
avail. So I went to the help site and called for help.
Later, I decided to reboot the computer and tried once more. This time it
worked and I continued creating. Thanks.
laozhao39

Hello I bought a G-Raid GR4 4000 4 TB and used it for a backup with my new Imac27. Now this is all I get. "Time Machine couldn't complete the backup to "G-RAID". to complete backup. An error occurred while creating the backup folder.

Hello I bought a G-Raid GR4 4000 4 TB and used it for a backup with my new Imac27. Now this is all I get. "Time Machine couldn’t complete the backup to “G-RAID”. to complete backup. An error occurred while creating the backup folder."
Any idea what I should do?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the search box.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

Error occur while interface labview with power and harmonic analyser

Similar Messages

Maybe you are looking for