"Error Occured" after Task completed at Work flow status in threestate-work flow of Sharepoint list

Hi There,
I have created a list as Alerts where we have Threstate workflow to assign the task to the user. Everything is working fine as expected but sometime the Workflow status getting "Error Occured" by User ID "System Account" after completed
the review task ,
Please help me to address the same, FYI we have 1.5 lakhs items in this list, the error is occuring very rare cases for random user even for some users of the same who get the WF status completed may get the Error occured also
Thanks
Rehman

Hi Rehman,
Whether this issue occurred for other lists. Please create a new list with the three-state workflow, compare the result.
Also, create a new three-state workflow for the problematic list, compare the result.
Please check the log file to find whether there is some message about this error. The log file is: C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\LOGS.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Similar Messages

I cant download itunes programme for my samsung rv510 laptop, it says error occurs after I try to instal the 10.7 version? What do I need to do?

I cant download itunes programme for my samsung rv510 laptop, it says error occurs after I try to instal the 10.7 version? What do I need to do?

.dmg.part is not a complete file.. It usually indicates that the entire file has not been downloaded yet. Are you sure you downloaded the entire file? (i recommend updating itunes through  > Software Update
Alternatively, you can download it from here: http://support.apple.com/kb/DL1614

HT4623 for the first time i bought this iPhone, i was enjoying it....i updated it with iTunes and suddenly message appear on my pc an error occurred.....n my phone is not working.... :-( what should i do?? m helpless...no support from ny side....

for the first time i bought this iPhone, i was enjoying it....i updated it with iTunes from older version to newer version and after installation when it was updating my iphone then suddenly message appear on my pc an error occurred.....n my phone is not working.... :-( what should i do?? m helpless...no support from any side....
and now its not even restoring back....showing me error's
m getting very irritated and unable to sleep jst because of all this crap....
instead i lost 1gb internet data in downloading the update

i tried restoring itz saying error occured 2008 :-(

Error occurs after I install sps16,

Error occurs after I install sps16, when I am using the My Tasks views, while I clicked on the Edit link to add a document to Attachments of that task, a new window pop up. but this is a blank windows!
how can I sloved this problem?
thanks
regards

I suggest that you search the SAP notes at http://service.sap.com/notes and if there isn't a solution there, send a message to SAP at http://service.sap.com/message. You ay them at lot of money each year for support, you may as well use it.
Paul

I cant re-store my iPhone through the iTunes. Message which comes up says' the iPhonw could not be restored. An unknown error occurred (21). i tried all the options and nothing seems working. please help

I cant re-store my iPhone through the iTunes. Message which comes up says' the iPhonw could not be restored. An unknown error occurred (21). i tried all the options and nothing seems working. please help

Hi chiekoo,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694#error21
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
Best of luck,
Mario

HT4623 I was installing the ios 6 on my iphone 3GS and an error occured and since then it's hanged up and not working. Please suggest some solution

I was installing the ios 6 on my iphone 3GS and an error occured and since then it's hanged up and not working. Please suggest some solution

the same thing here! each time its suppose to register with my network, it cant. im wondering if its a hardware problem

TDMS file error occurs after several hours

I have a compiled LabVIEW 2010 SP1 executable running on a Windows 7 PXI computer that is occasionally producing the following error message:
"LabVIEW: LabVIEW could not load the TDMS file component.
The top-level VI <my VI's name> was stopped at unknown on the block diagram of <my VI's name>"
This program is interfacing with equipment under test over a number of PXI cards and ethernet connections. It alters inputs to the system based on script commands, while receiving and displaying outputs. During testing, state changes are sent to a TDMS file. The system can run for hours but will usually produce the above error message... eventually.
The error seems to indicate that a LabVIEW file is missing, but the TDMS files are being created, so I may not be understanding the meaning of the error. Does anyone know what the actual cause(s) of this error message are?

The code writes to the TDMS file using the "TDMS Write" VI from the TDM Streaming Palette. These write VIs are located in 12 different sub VIs in a program loop within my main VI. Every 50ms they execute, service the I/O, and write to the TDMS file if data in the particular sub VI has changed state. Some are writing floating point numbers, most are writing strings. There are about 750 total channels being written. I know that posting the code would be more usefull than describing it, but I think posting the source code would be frowned upon by my company. There are over a hundred custom VIs and external hardware connections that are required to effectively run this code anyway.
Regarding timing, there doesn't seem to be a particular amount of time that has to pass before this issue occurs. I was given a screenshot that shows the error occured after 11 hours of running. I was also told that the same error had occured about 6+ hours into a test once. I can say that this error doesn't seem to occur quickly, as in within the first hour or so. It seems to require long duration tests.

I can't download Elements 13. It said an error occurred. I downloaded a trial of Lightroom and it worked. However, when I bought Lightroom, it doesn't download.

I can't download Elements 13. It said an error occurred. I downloaded a trial of Lightroom and it worked. However, when I bought Lightroom, it doesn't download.

Which operating system are you running on?
We might be able to help with Photoshop Elements but lightroom has it's own forum
Photoshop Lightroom
It would be useful if you could give us any error message you are seeing.
Are you trying to download Photoshop Elements from here
https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
For Lightroom, you need to say if you have bought the standalone version or the cloud version.
Brian

HT201210 What to do when an error occurs after the restoring process? my phone wont turn on anymore

What to do when an error occurs after the restoring process? my phone wont turn on anymore

The phone is telling you to plug in your phone to your computer. Do that then let it sit for a few minutes and then try it again and make sure itunes is open when you do

Error occurred uploading song, then goes to iCloud status "waiting"

I have about 250 songs (out of over 5000) that fail to upload to iCloud via matching.
They show an error symbol in the song list and if you click on it it says something like "could not be uploaded because an error occured."
It then eventually shows iCloud status of "waiting."
There doesn't appear to be any pattern to the songs with this problem.
Songs are mostly AAC audio files with a few MP3.
Some songs are just one or two from an album that has successfully uploaded or been matched.
I've tried deleting the songs from the cloud, converting them to mp3 and readding, but it doesn't work.
I've tried turning off itunes match and back on again. No difference.
This basically means I've spent a lot of money so I can't play 250 songs on my iOS devices.
All rather anoying.
Latest iTunes on latest OSX on mid 2011 MBP, also using assorted iOS5 devices.

Hi,
If i am not in understanding you are uploading the data intothe ods first and then to the infocube which both the extractions are delta right?
And your load is failing int he ODS stage am i right?
If i am right. And if this is a delta load to the ODS, you have to wait until the loading job in the background finishes. When the technical status of the request is yellow we should never force red to remove it. If you want to remove the req then first you have to kill the process associated with it.
As you mentioned, in the reconstruction tab you can see some requets in status yellow. Kindly kill the processes associated with it and force it to red and then make a repeat delta to ODS.
Then you can activate and further load it to the data target.
Hope this helps
Janardhan Kumar

Tasks get completed but workflow Status shows 'Error Occured' and not 'COmpleted' in Sequential Workflow Visual Studio 2010

I have a custom approval sequential
private void completeSPTask_MethodInvoking(object sender, EventArgs e)
SPListItem task = workflowProperties.Web.Lists["Workflow Tasks"].GetItemById(WfApproveTaskItemId);
task[SPBuiltInFieldId.WorkflowVersion] = 1;
task["Status"] = "Completed";
task.SystemUpdate(false);
if (task["Status"].ToString() == "Completed")
Hashtable HTdata = new Hashtable();
// HTdata["Status"] = "Completed";
// HTdata[SPBuiltInFieldId.Completed] = "TRUE";
HTdata[SPBuiltInFieldId.PercentComplete] = 1;
HTdata["FormData"] = SPWorkflowStatus.Completed;
// HTdata[SPBuiltInFieldId.TaskStatus] = SPResource.GetString(new CultureInfo((int)task.Web.Language, false),"WorkflowTaskStatusComplete", new object[0]);
SPWorkflowTask.AlterTask((task as SPListItem), HTdata, true);
task.Web.Update();
workflow which works properly, the task status gets completed
When the tasks are 'In Progress' the workflow status also remains "In Progress" but when the task is completed , it shows error Occurred. The following is my code in CompleteTask method.

I got it working by removing the complete task method and by updating the task in the ontaskchanged event , In that case both the task as well as the workflow gets updated

Errors occur after installation of Oracle 8i

Because my computer is P4, so at the beginning I couldn't install the oracle 8.1.6 or 8.1.7 from CD-rom. I searched this forum, and according to the information I got, I changed the SYMCJIT.dll to SYMCJIT.old, and installation is done. However, at the end of the installation when I wanted to exit the installer, an error dialog pops up which says " can't write to memory at xxxxx, click OK to stop and click cancel to debug..." I just clicked the OK to stop and exit the installer. And I use SQL*plus or form to connect my DB, works fine.
However, when I restart my machine, before I log into my account (CTRL+ALT+DEL), the same error pops up again, after I click several times on the OK button, it's gone, and I log into Windows again and work fine. I want to know what's the reason for that and how to solve it.
My system environent is: P4 with Windows2k Professional, first install form6i, then install oracle8.1.7 enterprise edition.
By the way, on the other system Win2k Server, same machine, I just only install Oracle 8.1.7, no such error occurs.
Thanks a lot
Amber

It would help if you told us the exact problem description and ... post in the correct forum. This forum is dedicated to oracle on apple's macosX.
What is the problem ?
Ronald.
http://ronr.nl/unix-dba

Trying to convert pdf to word - error message " an error occurred while signing in " - How do i get it to work ?

have been using convertor form more than a year now to convert pdf to word documents
have started to get message 'an error occurred while signing in'
Help please ??

This email is in response to support case #0185407323 submitted by Lowell Peterson.
I keep submitting the same problem and keep getting exactly the same response, which is not helpful. My problem is this: for over a year I have been converting .pdf documents to Word by clicking on Tools with a .pdf document open in Adobe Reader, then clicking on Convert. After a brief waiting signal, I am told to download and save the document. Perfect. But recently, every time I try to do exactly the same thing I get the message that says, "An error occurred while signing in."
I have followed this advice multiple times:
Do you get that error when you try to convert a file from within Reader? If so, please try this:
Choose Edit > Preferences (Windows) or Adobe Reader > Preferences (Mac OS).
Click Adobe Online Services on the left side.
Sign out of our Adobe ID and sign back in.
Try to convert your document again.
THIS PROCESS DOESN'T CHANGE ANYTHING. I JUST KEEP ON GETTING THE ERROR MESSAGE.
If you continue to have trouble, please verify that you can access the service via the web interface. To do this:
Open a browser and navigate to http://exportpdf.acrobat.com/signin.html
Try to log in with your Adobe ID (email address) and password.
Once logged in, follow the on-screen prompts to convert a file.
THIS WORKS, BUT WHY SHOULD I HAVE TO GO THROUGH ALL THESE STEPS WHEN I AM ALREADY IN A .PDF DOCUMENT WITH A "TOOLS" PANEL TELLING ME I CAN DO IT FROM THERE. PLUS, THIS MAY BE MY STUPIDITY, BUT I DON'T KNOW HOW TO "SAVE" THIS LINK, SO EVERY TIME I WANT TO CONVERT A DOCUMENT, I HAVE TO LOOK UP THIS ADVICE, THEN FOLLOW ALL THE STEPS. IT WAS A GREAT DEAL SIMPLER AND LESS TIME CONFUSING WHEN I COULD JUST DO IT FROM "TOOLS."
Any idea what the problem is~??

Installed newest Flash Player, "An error occured" message on most Youtube videos and other media not working

After installing the newest version of Flash Player, on most YouTube videos I try to play the message, "An error occurred. Please try again later." comes up. Also, on websites like Tumblr other media, like audio and videos uploaded there, don't play at all - it's just a blank white space where it should be. This all works fine in Chrome.
I've tried everything I can think of - I cleared the cache and removed cookies, updated all plug-ins, uninstalled and reinstalled both Flash and Firefox, disabled Ad-Block, ran it in Safe Mode and private browsing, restarted my laptop a couple of times - but none of it worked.

Thank you, fixed it.

Symbol lookup error occurs after compiling pacman

Hi there, i met some problems with my pacman before so i just decide to compile it again. I download the src and then execute the following commands
./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var
make
sudo make install
but after these, when i run my pacman, an error occurs:
pacman: symbol lookup error: pacman: undefined symbol: alpm_option_set_usedelta
i couldn't find any related information on the web, does anyone know what exactly happened?
thx.

falconindy wrote:
If this symbol isn't defined, then you compiled alpm from git. The patch that changes the name of this function is unreleased.
http://projects.archlinux.org/pacman.gi … e9cc198f19
I try the link you give, but now there is another error message.
pacman: undefined symbol: alpm_option_get_syncdbs
Did I misunderstand something?

"Error Occured" after Task completed at Work flow status in threestate-work flow of Sharepoint list

Similar Messages

Maybe you are looking for