Error occured during purchasing an asset
Hi,
When I am trying to purchase an asset in F-90 I am getting an error "For document type KR, an entry is required in field document header text".
Please help.
Thanks
Binoy
Dear Binoy,
Please check the field *Header Text* in F-90 screen and fill it up with proper narration for your transaction according to your requitement and simple SAVE.
OR
If its hidden then populate it through field status group and then save.
This will solve your issue. If you have any doubts feel free to share.
Regards,
Pankaj A Bhalerao.
Similar Messages
-
An error occurred during purchase of Numbers update for my MacBook Pro. What should I do?
euniceuy24 wrote:
My room has always a cool temperature that whenever i touch my laptop, the metal parts are cold. but whenever i go out of the room, my laptop automatically moistens and are wet due to the moist...
If your room is air conditioned, it should not only be cool but also relatively dry. And if you are simply moving your laptop to a different location when you leave your room, and that location will also be air conditioned, you'd be best off putting the laptop into a snug plastic bag while it's outside the cool rooms. That way, the humid air can't reach the laptop to condense on and in it. -
I purchased Lion and during download I was advised an error ocured. I have not been able to download again as appstore says I have osx. I cannot upgrade to a higher level, as my current system is 10.6.8.
Any Ideas?Launch app store, press the option key, and click on purchases. See if the button next to the OS installer changes to dark grey 'install' from light grey 'installed'.
-
Error occurs during Asset Master Record Creation.
Hello SAP Gurus,
The error occurs during asset master record creation.
Our fiscal year variant is Z6 (July to June). The asset was acquired in June 15 (previous fiscal year) but was only set up on July 30 (this fiscal year) . When we put the depreciation start date as 15 June the error appeared. While saving the Asset master we are getting below error.
We tried the same with Post Capitalization of Asset (ABNAN) there also we are getting same error.
ERROR: - as below
u2003
SYST: *You cannot determine the period for rule 02 to 05.08.08 ( todayu2019s date )*
*Message no. AA613*
*Diagnosis*The system could not determine a depreciation period on 05.08.08 for period control 02 of the period control method of phase N1 of depreciation key INTERN-00001-0000.
Procedure
Maintain the assignment of the periods for the period control entered.
Proceed
If the period control you entered is a standard period control, you can assign the periods automatically.Proceed
Please find enclosed attachment for clear description of the error.
Please share your experiences regarding this subject.
Thanking you in anticipation.
Regards,
Suresh.
09986375966Hi,
have you generated the period controls properly? If not, the error is raised correctly by the system.
To generate period controls go to:
IMG Asset Accounting -> Depreciation -> Valuation Methods -> Period Control -> Generate Period Controls / or you can use OA84
Regards,
Markus -
I purchased this computer today Windows 7; I have gone to the 64-bit download but at the end of the download I receive an error message saying the error occured during installation. Cannot download, any other way?
What does the error message say? (Precise text, please.)
-
Hi All
We are creating POs from interface program "Import Standard Purchase Order Program". Only for few of the POs, we are encountering the error 'Warning: An error occurred during tax calculation
. Please correct the problem or contact your system administrator.'
This error is happening for few PO's, other POs with same vendor, ship to and bill to location created successfully by the program
Any inputs on how to resolve this error is greatly appreciated.
Regards,
BrajeshHi Hussein,
Thank for the prompt response.
We have already applied the patch related to doc 1272684.1.
Below are the environment detail.
Database: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Application : 12.1.3
Diagnostic tool output :-
INTERFACE_
TRANSACTION_ID
INTERFACE_TYPE
COLUMN_NAME
PROCESSING_DATE
TABLE_NAME
ERROR_MESSAGE_NAME
ERROR_MESSAGE
100148
PO_DOCS_OPEN_INTERFACE
09-Aug-2013
PO_HEADERS_INTERFACE
PO_PDOI_TAX_CALCULATION_ERR
Warning: An error occurred during tax calculation. Please correct the problem or contact your system administrator.
Log file :-
+---------------------------------------------------------------------------+
Purchasing: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
POXPOPDOI module: Import Standard Purchase Orders
+---------------------------------------------------------------------------+
Current system time is 09-AUG-2013 21:09:04
+---------------------------------------------------------------------------+
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
STANDARD
N
INCOMPLETE
12805
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
To get the log messages for PDOI, please use the following id to query against FND_LOG_MESSAGES table:
AUDSID = 12076063
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
69
+------------- 1) PRINT -------------+
Printing output file.
Request ID : 55116524
Number of copies : 0
Printer : noprint
+--------------------------------------+
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed successfully
Current system time is 09-AUG-2013 22:27:42
+---------------------------------------------------------------------------+
Brajesh -
I can't install iTunes on Windows 7. "An error occurred during installation of assembly"
I recently purchased an iPhone 4s. This product requires me to insall iTunes on my pc, which runs Windows 7 64bit. However, when installing iTunes I keep recieving the same error message-- An error occurred during the installation of assembly 'Microsoft.VC80.CRT,type="win32",version='8.0.50727.4053',publicKey Token="1fc8b3b9a1e18e3b". ProcessorArchitecture="amd64" HRESULT: 0x800736B3
I've already looked over many previous forum posts and haven't been able to find a suitable solution to this yet. I had iTunes on my computer previously but deleted it after I had freezing trouble. I have ensured that all old files have been removed. Bonjour gave me some trouble but I think I have dealt with that now. Also, I have been experiencing some failures with windows update-- service pack 1 for windows seven and some security updates mostly-- which I am yet to solve. I really have no idea what to do as I would like to run my iPhone on the latest iOS. If anybody could help me I would be forever grateful.
Thanks, heattr.I've been having the same issues for the past year and a half. I've spent 6-8months trying to figure it out. Went to various Itunes stores with pictures on my Iphone per each step so I could relay all information that I'd come across and the personnel were less than helpful, after conversations that would sometimes last an hour between myself, employees and managers they always came back to "simply uninstall then reinstall" when I told them for the thousanth time that I've done that multiple times and my errors are happening while trying to reinstall it they act stumped and say "well then I'm not sure, I'll give you a call if I figure it out" and disappear. I've been very disatisfied at the lack of support from Apple and if Android to piece together a reletively reliable phone I'd switch to them in a heartbeat. I'll follow this question incase someone can answer this, but I don't have much faith.
BTW, wifey has Windows 7 running on the laptop and my phone syncs just fine to that and no trouble with itunes, just mine (desktop). -
FATAL ERROR occurred during installation
Trying to install a HP Officejet 4500 G510g-m onto a HP Desktop PC with Windows Vista.
Error message reads:
Fatal error message during installation
An error occurred during installation of assembly
'Microsoft.vc90.MFC,version="9.0.21022.8",publickeytaken=1fc8b3b9 a1e18e3b",processor architecture="x86",type="win32".'
"Fatal error"
"MSI.netdevicemanager40"
Error logs reads:
+0000000000000958722048/s/Now launching=x:/hpzmsi01.exe -m netdevicemanager40 -I xxx -f 'x:/hpwwins26.dat" - validate No at" -validate No
X:/Network64.msi failed with return code 1603
When searching for the code 1603, I found a trouble shooting number (c02455020)
When I run the program regsvr32 Atl.dll it came up with
DII Register Server failed with error code 0x2002801c
But the com product was already registered, the computer has been re-started 12 times. So I cannot understand why I cannot install the complete printer, why is telling me that only the basics can be installed. I purchased and ll-in-one because I need it all not just a printer.
Be so kind to enlighten me.
My father's patience has ended, and before he packs it back into the box, I am willing to troubleshoot it with you.
Please help.
Thank you.Hello Techiizz
Try the following article. It covers the Fatal Error 1603 and should help resolve your problem.
MSI Fatal Error 1603
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue. -
Error occurred during WM processing for posting change delivery
Hi Experts,
I am getting the following error when i try to create Outbound delivery aginst PO.
"L9 612 Error occurred during WM processing for posting change delivery"
Diagnosis
The indicator AUFER from the delivery type contradicts the
storage location constellation that was determined by the
WM system.
TVLK-AUFER = '<VAR2>'
WM = '<VAR1>'
1.Purchase order is Stock transport order ME21N ( UB)
2.Try to create Outbound using VL10B and i am getting the above error,
Thanks in advance.
Cheers...GopiHi Gopi,
Looking at problem you discribed, I am assuming you are using the delivery type other than "NL".
The reason for this error is the indicator "order required" in delivery type defination set to 'X : sales order required' and you have assigned this delivery type to the purshasing document UB in STO customising. So the requirement of delivery defination of having prior document as sales order is conflicting.. so the error is there.
Resolution:
Please change the assigned delivery type to NL to purchasing document type UB in SPRO> MM> Purchase order>set up for STO>assign delivery type and checking rule.
If you have custome delivery type the go to spro> LE> shipping>deliveries>define delivery type
change the order required from X to "B".
Hope this will help.
Regards,
Sudhir -
NOKIA N8 bug: CRITICAL ERROR OCCURED DURING INSTAL...
i purchased my nokia N8 2 weeks ago, I found some annoyin bug on it. The Error message is this: "CRITICAL ERROR OCCURED DURING INSTALLATION. WIDGET REMOVED" Then all my customized homescreen has gone & it changes to the default home screen. It seems like if you have a lot of widgets & some of them are are connected online, the noka n8 is feeling exhausted It crushes when it cannot cope the memory exhaustion or somehow, i don't know. Any one knows about his? It happens to me many times, specially when i scroll sideways to different homescreen. It really makes me sick. I don't know if i have to leave the way the default screen is to get rid of that crush, coz i have done many times of changing. I have been a Nokia fan but this kind of bug is really fraustating.
Solved!
Go to Solution.It may be you have a faulty handset ? You can take it to a Nokia Care Point to have it checked out under the warranty. You could also try doing a reset and re-installing the software using Ovi suite before taking to a Care point.
Try backing up your contacts, calendar and note ONLY, dial *#7370# followed by 12345 and the phone will reset to 'out of the box'. Then use Ovi suite to re-install the latest firmware and then set up your phone and re-install any apps you want. If this doesn't work, you WILL need to visit a Care Point, and although it's a bit of a pain, it won't take as long as waiting for the phone to be repaired/replaced, worth giving it a try ?
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution' -
"fatal error occurred during installation" pops up after downloading itunes
i have recently purchased a new iPod nano, so (on my windows vista acer laptop - which i had previously had itunes on before - my old ipod had broken ages ago so i uninstalled it and everything) i started to download itunes. it had done so with no problems at all. but when it went to install (it didn't do it automatically so i had to click on the icon) the "fatal error occurred during installation" came up without specifying what error. i have tried uninstalling and reinstalling, restarting my laptop etc but nothing has worked. the same message occurs all the time.
can you help me solve this problem as i would like to listen to my music when i go out =[
please and thanksI have the same problem. Ipod touch purchased for christmas and I cannot load itunes without this fatal error always occuring. Have tried changing access and priveledge controls all to no avail......can anyone help?
-
Not Loaded. A runtime error occurred during the load of the COM add-in.
Hey All!
I am relatively new to Hyperion, and need some help. I recently purchased a new laptop, and I am trying to reinstall Smart View 11.1.2.1 on my home system, but I continue to run into difficulties. I launch the Smart View installer by right-clicking and selecting "Run as Administrator," and everything seems to install successfully. However, when I open Excel or any Microsoft Office product, the Smart View tab is unavailable, and when I Manage my COM add-ins, the pop-up box reads "Load Behavior: A runtime error occurred during the loading of the COM add-in."
I have looked into my registries, and everything seems to be in order. I have changed my load behavior back to 3 as well. Any ideas? Are there any compatibility issues I need to consider? Thanks for your help!
CraigPLEASE do not do this! You are storing up trouble for the future that will be so much harder to unpick.
1. It does not solve the problem. Whatever the problem was, this is not the solution! If the issue is multiple DLLs, you need to delete the duplicates and register the correct ones, not make even more copies. If the problem is permissions, you need to sort that one out.
2. If it appears to solve the problem, then the problem (something to do with permissions) needs to be solved at source, not kludged round like this.
3. If there is an unresolved problem on the system, it is more likely that the next upgrade will not go well.
4. Uninstaller cannot remove the copies you made manually. The same thing applies to upgrades! You risk getting mixed versions afterwards.
My first steps to resolve this problem would be:
1. Uninstall the SmartView client. You must be an administrator to do this -- try to be the same administrator that installed it.
2. Clean up. Make sure the files are all deleted. Search the whole box for old files (HsTBar.xla, HsAddin.dll etc.) possibly left over from an old installation -- you might have upgraded into a different location at some time in the past and left orphaned files hanging around. Get rid.
3. Reboot. Log in as a local administrator.
4. Open Excel and visit the Add-Ins dialog and remove any entries for SmartView.
5. Install SmartView client from a local copy of SmartView.exe -- make sure you have the correct version.
That solves 99% of problems like this. If you have to register the DLLs manually, it suggests that your 'administrator' account doesn't have the full rights you think it has. DON'T kludge it by copying DLLs into your profile!
Thanks. -
0FI_GL_10 can't delta :Errors occurred during the extraction.
hi,sdn!
i have 3 DataSources,
0FI_AA_11(FI-AA: Transactions),
0FI_AA_12(FI-AA: Posted Depreciations) and 0FI_GL_10(General Ledger: Leading Ledger Balances).
The initialize and full extraction is ok.
when i delta it in rsa3,the system tell me:Errors occurred during the extraction.
Is Append Structure result in this error?
i want to know the reason,thanks!For summarization of line items by master record characteristics (such as cost center) during posting of ODS objects to InfoCubes, master data must already exist prior to extraction of transaction data. The following sequence must therefore be kept to during extraction:
0FI_GL_4
General Ledger: line items (if required)
0ASSET_ATTR_TEXT
Asset subnumber (flexible updating)
0ASSET_AFAB
Depreciation area real or derived
then the transaction data
0FI_AA_11
FIAA : transactions and / or
0FI_AA_12
Posted depreciations (period values) -
Length error occurred during in IMPORT statement
Dear Friends,
(length error occurred during in IMPORT statement),when im using the SUBMIT syntax..can i know what is the reason.
Thanks
Rajkumar.AHello,
I would like to know how did you solve the issue as i came across the same issue.
Thanks,
FBK -
RC-00118: Error occurred during creation of database
adcrdb.sh started at Mon Nov 14 16:16:13 EAT 2011
The environment settings are as follows ...
ORACLE_HOME : /u04/d01/tech_st/11.2.0
ORACLE_SID : JCLONE
TWO_TASK :
PATH : /usr/bin:/u04/d01/tech_st/11.2.0/bin:/usr/bin:/usr/sbin:/u0 4/d01/tech_st/11.2.0/jdk/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/u04/ d01/tech_st/11.2.0/appsutil/clone/bin/../jre/jre/bin:/usr/lib/qt-3.3/bin:/usr/ke rberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbi n:/usr/bin:/usr/X11R6/bin:/root/bin:.
LD_LIBRARY_PATH : /u04/d01/tech_st/11.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib :/u04/d01/tech_st/11.2.0/ctx/lib
Executable : /u04/d01/tech_st/11.2.0/bin/sqlplus
The log information will be written to
/u04/d01/tech_st/11.2.0/appsutil/log/JCLONE_oracle/adcrdb_JCLONE.txt
Creating the control file for JCLONE_oracle database ...
SQL*Plus: Release 11.2.0.2.0 Production on Mon Nov 14 16:16:13 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1348968 bytes
Variable Size 427821720 bytes
Database Buffers 629145600 bytes
Redo Buffers 13017088 bytes
CREATE CONTROLFILE REUSE SET DATABASE "JCLONE"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01159: file is not from same database as previous files - wrong database id
ORA-01110: data file 1: '/u04/d01/apps_st/data/system01.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP add tempfile '/u04/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "JCLONE.jtl.co.ke"
ERROR at line 1:
ORA-01109: database not open
ORA-01507: database not mounted
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1348968 bytes
Variable Size 427821720 bytes
Database Buffers 629145600 bytes
Redo Buffers 13017088 bytes
Database mounted.
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-01119: error in creating database file
'/u04/d01/tech_st/11.2.0/dbs/MISSING00015'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 4754
ORA-06512: at line 1
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1348968 bytes
Variable Size 427821720 bytes
Database Buffers 629145600 bytes
Redo Buffers 13017088 bytes
CREATE CONTROLFILE REUSE SET DATABASE "JCLONE"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01159: file is not from same database as previous files - wrong database id
ORA-01110: data file 1: '/u04/d01/apps_st/data/system01.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP add tempfile '/u04/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "JCLONE.jtl.co.ke"
ERROR at line 1:
ORA-01109: database not open
Error Running create/replace library with adupdlib.sql
ORA-01109: database not open
PL/SQL procedure successfully completed.
File created.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Pr oduction
With the Partitioning, OLAP, Data Mining and Real Application Testing options
exit_code=0
Checking for errors ...
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 11.2.0.2.0 Production on Mon Nov 14 16:16:32 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected.
ORACLE instance shut down.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Pr oduction
With the Partitioning, OLAP, Data Mining and Real Application Testing options
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : oracle
sDbDomain : jtl.co.ke
sDbPort : 1524
sDbSid : JCLONE
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@oracle.jtl.co.ke:1524:JCLONE
Exception occurred: java.sql.SQLException: IO Error: The Network Adapter cou ld not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle .jtl.co.ke)(PORT=1524))(CONNECT_DATA=(SERVICE_NAME=JCLONE)))
Exception occurred: java.sql.SQLException: IO Error: The Network Adapter cou ld not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle .jtl.co.ke)(PORT=1524))(CONNECT_DATA=(SERVICE_NAME=JCLONE.jtl.co.ke)))
Exception occurred: java.sql.SQLException: IO Error: The Network Adapter cou ld not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:661)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:328)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:304)
at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:154)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstruct orAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingC onstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:501)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run(Thread.java:595)
Current database Version is 11.2.0.2
Apps Version is 11.5.10.2
RUP version is 6
Forms Patchset version is 19
Please advise how to resolve this error ?
Regards
Mohammed.Please refer to these docs/links.
Troubleshooting RapidClone issues with Oracle Applications 11i [ID 364565.1]
Adcfgclone.pl DBTier is failing with error for dbms_backup_restore.zeroDbid(0) [ID 361157.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=ORA-01503+AND+ORA-01159+AND+ORA-01110&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein
Maybe you are looking for
-
Lines Not Converting From Autocad to Pdf
I am using Windows 7 Pro, Autocad 2011 (full version), Acroplot Pro 2013 and Adobe Acrobat Pro. Using Acroplot Pro, we convert Autocad files to pdf. We are having issues with some lines, or entire sections of a drawing, not converting to pdf file. As
-
Hi, Is that possible to parse a xml file using regular expressions....if s what is the API needed thanx in advance
-
Hi I am using file adapter to read 'n' number of files. I need to know which record is from which file. Basically I need to distinguish between records of different files. For example In FILE_1 i have record like First Name Last Name WorkLog_
-
Anyone else having problems running Jinitiator 1.3.1.22 in Internet Explorer 7.0 in HTTPS mode? I'm getting the usual unhelpful java.lang.ClassNotFoundException:oracle.forms.engine.Main error. Works okay in HTTP mode. Confirmed that JInititiator and
-
Microsoft Dynamics AX WebSession() is null in Enterprise Portal (EP) when running from a List Page. The WebSession() works for a detail page, but nor a list page in EP. Does anyone know of a workaround to this issue? Thanks. Scott