Error occured during report processing

Hi,
When I try to print a report from baan session, the following error message comes:
"An error has occured during report processing.
Query execution failed for dataset 'dsBalanceSheet."
The dataset contains stored procedure call in SSRS 2008. I have executed the SP manually in SQL server, and it runs fine.
But when same SP gets called from SSRS report, it says that query execution failed for the respective dataset.
How I come to know that where actually the fault is?
Regards,
Mamata

Hello Mamata,
Are you using in SSRS the same credentials as for SSMS when you run the stored procedure or is it a different one? If it's a different login, then check if that do have permissions to executed the stored procedure.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Similar Messages

An Error Occurred During Report Processing - Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 12019

When I run the report on production I got the following error message:
Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the
request on the server. The status code returned from the server was: 12019
It hasn’t happen on Dev and Test before.
I googled, The error is described as:
12019 ERROR_INTERNET_INCORRECT_HANDLE_STATE
The requested operation cannot be carried out because the
handle supplied is not in the correct state.
But I cannot find the solution for that.
Has it happend to you before? How to solve that?

Same behaviour here, Sharepoint 2013 with SSRS in integrated mode
Error: Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status
code returned from the server was: 12019

CRM 2011+An error has occurred during report processing. (rsProcessingAborted)

Hi,
i have installed CRM 2011 on-premise version in Server A. Database and CRM 2011 Reporting Extenison in Server B. Both the server are 64 bit server and IIS 7.0 . i can able to browse the Report server url. USer as been added in Sql DB Logins and
as permission to Reportserver and ReportservertempDB.
i can able to access the CRM Reports only using Admin Credenttials that is from the credential which Report server is installed and configured
Error in server 1:
Web service request SetDataSourceCredentials to Report Server
(http://servername/Reportserver_XXXSQLSRVR)failed with SoapException. Error: An error has occurred during report processing. (rsProcessingAborted).
Error in Server 2: took this error From error log file
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: e ERROR: Data source 'CRM': An error has occurred. Details: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'CRM'. ---> Microsoft.Crm.Reporting.DataExtensionShim.Common.ReportExecutionException:
Caller S-1-5-21-1587242514-2812063576-513219026-1110 has insufficient privilege to run report as user 9f69b98c-c73d-e011-bd85-842b2b6567dd
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: e ERROR: An exception has occurred in data source 'CRM'. Details: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'CRM'. ---> Microsoft.Crm.Reporting.DataExtensionShim.Common.ReportExecutionException:
Caller S-1-5-21-1587242514-2812063576-513219026-1110 has insufficient privilege to run report as user 9f69b98c-c73d-e011-bd85-842b2b6567dd
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: i INFO: DataPrefetch abort handler called for Report with ID=. Aborting data sources ...
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing., ;
Info: Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'CRM'.
---> Microsoft.Crm.Reporting.DataExtensionShim.Common.ReportExecutionException: Caller S-1-5-21-1587242514-2812063576-513219026-1110 has insufficient privilege to run report as user 9f69b98c-c73d-e011-bd85-842b2b6567dd
Eventvwr error in server 2:
Failed to unload app domain DefaultDomain. The following exception occurred: Error while unloading appdomain. (Exception from HRESULT: 0x80131015).
I tried the Following ways to fix it
1.added User as content manager
2.In CRM apppool i have Admin in identity column
its really paining when i'm unable to access the CRM 2011 Default Reports. got stucked for a day.
Thanks, Saraswathy Kumaravelu

Hi All,
I encountered this same issue today after installing CRM 2011.
CRM 2011 on Server A
SQL and SSRS 2008 R2 on Server B
I found that I got the same errors described here when running the standard reports even after I had installed the Reporting Extension (CRM 2011 replacement for CRM 4.0 Data Connector). The reason I got the error was because the 'Data Source Type' had not
been updated in Report Manager.
Here's how I resolved:
1. Browse to Report Manager (http://SERVERB/Reports)
2. Open the Organisation_MSCRM folder
3. Click Show Details
4. Open the MSCRM_DataSource
5. Change the Data Source Type from Microsoft SQL Server
to Microsoft Dynamics CRM SQL
*Note: - This option is only available once Reporting Extension has been installed on SSRS Server.
6. Clear the contents of the Connection String box
7. Set the Connect Using: option to Credentials Supplied by user running the report
but do NOT check the
Use as Windows Credentials when connecting to the DataSource option.
8. Click Apply
9. Restart the SQL Reporting Services Service in
Reporting Services Configuration Manager
10. Test by running one of the Standard CRM Reports (e.g. User Summary)
Ta Da!! - Success!!
Hope this helps!

[Forum FAQ] Troubleshooting "An error has occurred during report processing" message when viewing SCCM reports

Symptom:
When you view a report with SCCM, you may encounter the following error message:
An error has occurred during report processing.
Under the details box, you can see the detailed error information as below:
System.Web.Services.Protocols.SoapException: The report server has encountered a configuration error. Logon failed for the unattended
execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. Logon failed for the unattended execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException:
Log on failed. Ensure the user name and password are correct. ---> System.ComponentModel.Win32Exception: The user name or password is incorrect
at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ParameterInfoCollection& Parameters)
at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
Figure 1 is the screenshot of the error message in SCCM:
Figure 1.
Cause:
According to the detailed error message, it indicates that “The report server has encountered a configuration error. Logon failed for the unattended execution account.”
and “The user name or password is incorrect”, so this issue would be caused by the mismatched credential stored in report server.
Solution:
To solve this issue, you can follow the steps below:
1.
Access Report Manager URL on your reporting server.
From figure 2, you can see that the URL for Report Manager is
http://SCCM:80/Reports
in our lab environment. You can check your Report Manager URL in Reporting Services Configuration Manager.
Figure 2.
2.
Find out the date source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} and access it.
Figure 3.
3. Test connection (Figure 4)
You can have a test connection to check whether the credentials stored in the report server are correct or not.
Figure 4.
4.
Modify the password or choose another authentication method
If you want to change the password, please make sure that password is the same as the one that you have set for that user account in the domain.
5. Confirm connection
After you change the password, you can test connection again. From figure 5, we can see that connection created successfully.
Figure 5.
After all the steps above, there is no error message when viewing the report. (Figure 6)
Figure 6.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

ok . the user name is sccm.admin this user have the assignment to run as a services, he is a domain admin, on the sql server this user have the sysadmin, i create the reporting with the Reporting Services Configuration Manager, and on the Database i use
the sccm.admin to create the new database, on the Service Account i use sccm.admin user, also this user have local administrator on the SCCM server, + i give him the dbreader on All the database on the SCCM server witch it also the SQL server, i add the sccm.admin
on the reporting web the system role and check the all settings give him full permissions
do i make my self clear ? (my English is not so bright )
now from the SCCM 2012 console , some reports run perfectly, and some run and trow this error at me
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
this poor gay have the same problem
An error has occurred during report processing. (rsProcessingAborted)

An error has occurred during report processing. (rsProcessingAborted)

Access Web Databases and SSRS
Issue:
After creating an access web database, such as Contacts Web Database in SharePoint 2010 we receive the following error when trying reports. This only happens on the Address Book, Phone Book, and Contact List reports. The Contact
Details and Printable Labels reports both work. The reports do not begin to error until data is added to the database (no errors initially).
I have duplicated this across all of our environments with the same results and get similar results when adding a Projects Web Database.
Environment:
Prod:
3 WFE Servers – SP 2010 sp1
3 App Servers – SP 2010 sp1
2 SQL Servers – 2012 sp1
QA:
3 WFE Servers – SP 2010 sp1
3 App Servers – SP 2010 sp1
2 SQL Servers – 2012 sp1
DEV:
1 WFE/App Server – SP 2010 sp1
1 SQL Server – 2012 sp1
Background
SSRS was installed following recommended guidelines and can be verified to be working. http://blog.helloitsliam.com/Lists/Posts/Post.aspx?ID=66
Error full text
Microsoft SQL Server Reporting Services
An error has occurred during report processing. (rsProcessingAborted)
The Group expression for the grouping ‘Group1’ contains an error: Request for the permission of type 'Microsoft.Office.Access.Server.Security.AccessServicesPermission,
Microsoft.Office.Access.Server.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' failed. (rsRuntimeErrorInExpression)

Found the answer
here.
In short, SSRS 2012 installation missed a couple of config entries. You'll have to add them yourself:
Open C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\WebServices\Reporting\rsreportserver.config. Search for the <Data> tag and add this entry:
<Extension Name="ADS" Type="Microsoft.Office.Access.Reports.DataProcessing.AdsConnection, Microsoft.Office.Access.Server.DataServer, Version=14.0.0.0, Culture=Neutral, PublicKeyToken=71e9bce111e9429c" />
Open C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\WebServices\Reporting\rssrvpolicy.config.
Search for <NamedPermissionSets> and add this entry:
<PermissionSet
class="NamedPermissionSet"
version="1"
Name="ReportExpressionsDefaultPermissionSet">
<IPermission class="SecurityPermission" version="1" Flags="Execution" />
<IPermission class="Microsoft.Office.Access.Server.Security.AccessServicesPermission, Microsoft.Office.Access.Server.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" version="1.0" Flags="CalculationCallback" />
</PermissionSet>
In the <CodeGroup>node, around line 70, find and change PermissionSetName from “Execution” to “ReportExpressionsDefaultPermissionSet”

An error has occurred during report processing. (rsProcessingAborted). Query execution failed for dataset 'DimUserWorkCentre'. (rsErrorExecutingCommand). The Cube either does not exists or has not been processed

Hi,
I'm having issues with the report created using SSAS cube.
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'DimUserWorkCentre'. (rsErrorExecutingCommand)
The Operator_Performance cube either does not exist or has not been processed.
I have searched through internet and tried all the solutions, but didn't worked for me.
SSRS services running as NETEWORK SERVICE user.
SSRS Execution running as a Different user, which is the login is used to logon ot that server. I have also verified this user has access to database. I'm using Shared DataSource(SSAS Source) for this report.
Can any one please help me.
Thank You,
Praveen.
Praveen

Hello,
Have you tried it to execute on report manager , Is your data source properly configured in Report Manager and your report is mapped with Datset correctly?
Have you executed the Dataset query MDX editor now?
What is the volume of data you are fetching in the report. Try it to execute in other than IE , I don't know the exact reason but some of our report with large volume of data are failing on IE , on the other hand these reports are running fine Google
Chrome
blog:My Blog/
Hope this will help you !!!
Sanjeewan

Problem to generat an report on an SSRS for SCCM 2012 R2 SP1. I got error has occurred during report processing.

Hi,
Problem to generat an report on an SSRS for SCCM 2012 R2 SP1. I got error has occurred during report processing.
In general it is no problem to generat SSRS reports, but an custom one i get issue with.
The Error:
An
error has occurred during report processing. (rsProcessingAborted)
Query
execution failed for dataset 'DataSet1'. (rsErrorExecutingCommand)
ExecuteReader:
CommandText property has not been initialized

Hi SaiTech,
According to your description, when you render report on SCCM 2012 R2, you got the error message.
According to my knowledge, the issue can be caused by following reasons:
Select permission not granted to ConfigMgr reporting account. We need to open the SQL management console and open the properties dialog box of configmgr db, grant select and execute permission to ConfigMgr reporting account.
Reporting Services Web Service URL or Report Manager is false. Make sure Web Service URL and Report Manager URL are correct. Restart SMS_Executive service and reinstall Reporting Service Point, then please render the report again.
Report timeout. Increase query and report timeout.
If the problem remain unresolved, please provide detailed information of SRSRP.log (default location: %programfiles%\Microsoft and Configuration Manager\Logs) and reporting services error log(default location: %programfiles%\Microsoft SQL Server\<SQL
Server Instance>\Reporting Services\LogFiles), it will help us move more quickly toward a solution.
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support

An error has occurred during report processing. (rsProcessingAborted).. Query execution failed for data set

Hi All,
I'm facing a strange problem..
I've developed few reports. they are working fine in develop environment. after successfull testing they were published on web.
in web version, all reports are executing for first time.. if I change any of parameters values or without chaning also..
if I press "View Report" following error occurs..
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for data set 'dsMLGDB2Odbc'. (rsErrorExecutingCommand)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
please suggest any alternative ways to overcome this issue
thanks in adv.

in my case the problem is
one virtual machine is for developers
other for testers
in developers i created a report, then save like *.rdl and copy to testers machine, does not work there
the error what testers get is
Error during the local report processing.
Could not find a web-based application at http://developersMachine/AnalyticsReports/DataBaseConnector.rsds
and the solution is to use alternative url or in some cases http://localhost/

An error has occurred during report processing. (rsProcessingAborted) Query execution failed for dataset 'dsPriority'. (rsErrorExecutingCommand)

click report error:
log file:
processing!ReportServer_0-2!104c!04/27/2015-19:15:21:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing., ;
Info: Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing.
---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Query execution failed for dataset 'dsPriority'.
---> Microsoft.AnalysisServices.AdomdClient.AdomdErrorResponseException: Query (26, 25) The ALLMEMBERS function expects a hierarchy expression for the argument. A member expression was used.
   at Microsoft.AnalysisServices.AdomdClient.AdomdDataReader..ctor(XmlReader xmlReader, CommandBehavior commandBehavior, AdomdConnection connection)
   at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.ReportingServices.DataExtensions.AdoMdCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.RunDataSetQuery()
   --- End of inner exception stack trace ---
   at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.RunDataSetQuery()
   at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.Process()
   at Microsoft.ReportingServices.OnDemandProcessing.RuntimeParameterDataSet.Process()
   at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.ProcessConcurrent(Object threadSet)
   --- End of inner exception stack trace ---
open http://localhost:8080/tfs/TeamFoundation/Administration/v3.0/WarehouseControlService.asmx?op=ProcessWarehouse click Invoke:
System.Web.Services.Protocols.SoapException: TF221029: Reporting for Team Foundation Server does not have any warehouse jobs defined. Use the Team Foundation Administration Console to rebuild the reporting. : 2015-04-27T19:30:29:782 ---> System.InvalidOperationException:
TF221029: Reporting for Team Foundation Server does not have any warehouse jobs defined. Use the Team Foundation Administration Console to rebuild the reporting. at Microsoft.TeamFoundation.Warehouse.WarehouseAdmin.QueueJobs(String collectionName, String jobName)
at Microsoft.TeamFoundation.Warehouse.WarehouseControlWebService.ProcessWarehouse(String collectionName, String jobName) --- End of inner exception stack trace --- at Microsoft.TeamFoundation.Warehouse.WarehouseControlWebService.ProcessWarehouse(String collectionName,
String jobName)

Hi shelman,
I'd like to know whether you configured TFS reporting service properly, and if you can get the report normally before. From the error message, you might has wrong data source or the parameters of the dataset 'dsPriority'. You can check whether the data source
for your report is available, try to use windows authentication. Or check the parameters of dataset 'dsPriority' make sure the query works when you execute it manually.
To process the TFS data warehouse and analysis services cube, I'd like to know which operation you selected before clicking Invoke button. Please follow the instructions on this
page to process TFS data warehouse and analysis service cube manually. You can also refer the James's last reply in this
thread or this
blog to check if the solutions work for you.
Another option is run TFS best practice analyzer to check if there any configure issues on your TFS server machine. And check event logs to see if there any useful information, elaborate more details about your scenario including reproduce steps if the problem
persists.
Best regards,

SCCM 2012 An error has occurred during report processing (rsProcessingAborted)

I have this error on some reports i try to run in my customer
i rebuild all the Database and add the security rule for the report database
i gave the user Logon locally rights ,(and run as a services) also run as sysadmin
here is the error
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
here is a log srsrp.log:
System.Web.Services.Protocols.SoapException: The policy for '#######\IT Department' user or group is not valid. The role assignment is either empty, specifies a user or group name that is already used in an existing role assignment for the current item,
or specifies duplicate roles for the same user or group. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InvalidPolicyDefinitionException: The policy for '#######\IT Department' user or group is not valid. The role assignment is either empty, specifies
a user or group name that is already used in an existing role assignment for the current item, or specifies duplicate roles for the same user or group.~   at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.SetPolicies(String Item,
Policy[] Policies)~   at Microsoft.ReportingServices.WebServer.ReportingService2005.SetPolicies(String Item, Policy[] Policies)

ok . the user name is sccm.admin this user have the assignment to run as a services, he is a domain admin, on the sql server this user have the sysadmin, i create the reporting with the Reporting Services Configuration Manager, and on the Database i use
the sccm.admin to create the new database, on the Service Account i use sccm.admin user, also this user have local administrator on the SCCM server, + i give him the dbreader on All the database on the SCCM server witch it also the SQL server, i add the sccm.admin
on the reporting web the system role and check the all settings give him full permissions
do i make my self clear ? (my English is not so bright )
now from the SCCM 2012 console , some reports run perfectly, and some run and trow this error at me
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
this poor gay have the same problem
An error has occurred during report processing. (rsProcessingAborted)

SOAP to proxy scenarion error An error occurred during the processing of proxy E 00 001 The message can not be processed in plugin mode HTTP

Hi all
My scenario is soap to proxy scenario .while testing using soap to proxy i am getting " An error occurred during the processing of proxy E 00 001 The message can not be processed in plugin mode HTTP: in sxmb_moni sap pi .
Some times this interface is failing and some time its successfully processing.
While testing with successful xml data also i am getting the same error in sxmb_moni.
I modified the proxy inbound code where passing error message and still i am getting the same message.
Please suggestion the same for error solving.
Regards
Ravi.

Hi,
I'm facing the same problem.
I wrote an very easy report. It works as intended, but when i set fillable='X' i get the error FPRUNX 001.
FP_GET_LAST_ADS_TRACE return following:
Begin operation:
Render, elapsed time = 16 ms.
#   End operation: Render, elapsed time = 89 ms.
#   Begin operation: UsageRights, elapsed time = 89 ms.
#   End operation: UsageRights, elapsed time = 97 ms.#
...and the error string of FP_GET_LAST_ADS_ERRSTR is:
ADS: Request start time: Wed Jul 01 14:44:26 CEST 2009(200.101).
Any idea what the problem might be?

An unexpected error occurred in Report Processing. (rsInternalError)

Hi ,
An unexpected error occurred in Report Processing. (rsInternalError)
Get Online Help
The type initializer for 'Microsoft.ReportingServices.Library.RSLocalCacheManager' threw an exception.
The type initializer for 'Microsoft.ReportingServices.Diagnostics.MemoryAuditCollection' threw an exception.
Exception of type 'System.OutOfMemoryException' was thrown.
I get the above error message when i click to see the cube status on SSRS home page under admin reports .
probably all the TFS 2012 reports shows the same error message.
Please advice...
No space issue is seen for the Tfs report server DB or temp db.
Below is what i find in the reporting service Logs..
processing!ReportServer_0-78!179c!04/30/2014-09:41:07:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: , Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: An unexpected error occurred
in Report Processing. ---> System.TypeInitializationException: The type initializer for 'Microsoft.ReportingServices.Library.RSLocalCacheManager' threw an exception. ---> System.TypeInitializationException: The type initializer for 'Microsoft.ReportingServices.Diagnostics.MemoryAuditCollection'
threw an exception. ---> System.OutOfMemoryException: Exception of type 'System.OutOfMemoryException' was thrown.
at Microsoft.ReportingServices.Diagnostics.MemoryAuditCollection..cctor()
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.Diagnostics.MemoryAuditCollection.Register(MemoryAuditProxy map)
at Microsoft.ReportingServices.Library.RSLocalCacheManager..ctor()
at Microsoft.ReportingServices.Library.RSLocalCacheManager..cctor()
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.Library.SegmentCache.TryGetCache(Guid segmentId, Byte[]& buffer)
at Microsoft.ReportingServices.Library.CacheStorageLayer.Read(SegmentChunkDbInterface storage, ReadWriteParameters parameters, ReadWriteStatistics& statistics)
at Microsoft.ReportingServices.Library.SegmentedChunkStorage.Read(Int64 position, Byte[] buffer, Int32 offset, Int32 length)
at Microsoft.ReportingServices.Library.StorageStream.Read(Byte[] buffer, Int32 offset, Int32 count)
at Microsoft.ReportingServices.Library.BufferedReadWriteStream.FillBuffer(Int32& bytesRead)
at Microsoft.ReportingServices.Library.BufferedReadWriteStream.ReadByte()
at System.IO.BinaryReader.ReadByte()
An unexpected error occurred in Report Processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: An unexpected error occurred in Report Processing. ---> System.Exception: For more information about this
error navigate to the report server on the local server machine, or enable remote errors
at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetProperties(String Item, Property[] Properties, ItemNamespaceEnum itemNamespace, Property[]& Values)
at Microsoft.ReportingServices.WebServer.ReportingService2010.GetProperties(String ItemPath, Property[] Properties, Property[]& Values)
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
Thanks,
Manish

Hi,
1. Are you using the NLB? If possible, please turn off the NLB temporally to see whether the is gone.
2. Try to enlarge the execution timeout value in the web.config.
a. Backup the web.config first. Then, open the web.config from the report server folder, located at c:\Program Files\Microsoft SQL Server\MSRS11.<instance name>\Reporting Services\ReportServer\ by default.
b. Find out the following line in the file.
<httpRuntime executionTimeout="9000" />
c. Modify the attribute value from 9000 to 36000. Save the web.config file and restart the reporting service.
3. Restart the reporting service and then you need reproduce this issue, and collect the new reporting service logs.
Thanks.
Tracy Cai
TechNet Community Support

Error occurred during WM processing for posting change delivery

Hi Experts,
I am getting the following error when i try to create Outbound delivery aginst PO.
"L9 612 Error occurred during WM processing for posting change delivery"
Diagnosis
    The indicator AUFER from the delivery type contradicts the
    storage location constellation that was determined by the
    WM system.
    TVLK-AUFER = '<VAR2>'
    WM = '<VAR1>'
1.Purchase order is Stock transport order ME21N ( UB)
2.Try to create Outbound using VL10B and i am getting the above error,
Thanks in advance.
Cheers...Gopi

Hi Gopi,
Looking at problem you discribed, I am assuming you are using the delivery type other than "NL".
The reason for this error is the indicator "order required" in delivery type defination set to 'X : sales order required' and you have assigned this delivery type to the purshasing document UB in STO customising. So the requirement of delivery defination of having prior document as sales order is conflicting.. so the error is there.
Resolution:
Please change the assigned delivery type to NL to purchasing document type UB in SPRO> MM> Purchase order>set up for STO>assign delivery type and checking rule.
If you have custome delivery type the go to spro> LE> shipping>deliveries>define delivery type
change the order required from X to "B".
Hope this will help.
Regards,
Sudhir

Error occurred during control processing

Hi Team,
I am developing a module pool program. Now I face an Information message "Error occurred during control processing" whenever I open the program in SE80. The object list is also distorted. The issue is with this program only and other Programs can be opened by SE80 without any message being displayed. Please help me find out what is so special about my module pool program.
Regards,
Amit

Hi,
Which version of SAP GUI you are using .
Try upgrading it , if it is an older version .
Had the same message once but not for module pool ,and it got removed after SAPGUI upgrade .
Regards ,
Hemant
Edited by: Hemant.J on Jul 14, 2011 10:56 AM

An error occurred during the processing of a configuration file.

hi,
On installation and using oracle session provider, i am getting following error.
An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Line 51: <providers>
Line 52: <add name="MyOracleSessionStateStore"
Line 53: type="Oracle.Web.SessionState.OracleSessionStateStore,
Line 54: Oracle.Web, Version=2.112.2.0, Culture=neutral,
Line 55: PublicKeyToken=89b483f429c47342"
Can any one help me?
Thanks in advance
Siva

my server :
os windown server 2003
iis 6.0

Error occured during report processing

Similar Messages

Maybe you are looking for