Error occured: Error in Source. No Message Available

Hello all,
This is a problem I encountered when migrating a page from ep5 to ep6 (sp9).
The page consists of 2 iViews:
1. An iView for inserting search details.
2. An iView for displaying results.
The two iViews communicate using EPCF script methods.
When trigerring the event in the ep6 page, I get the above message in the results iView.
Other pages that are using the same methodology are working fine, so I think that the EPCF configuration is ok (it is set to default).
Needless to say, this page worked like a clock in ep5.
I'm pretty lost right now, so any help would be appreciated (and rewarded...)
Thanks ahead,
yoav.

Hi Yoav,
    I am experiencing same error message for PLM BP for projects iviews.
Anyone in this forum to guide us.
Thanks,
Mandar

Similar Messages

  • MSS iView Error "Error in Source. Message not available"

    After installing MSS 60.1.5 (System = HP-UX 11.11 ORACLE 9.2.0.5. SAP EP 6.0 ON WEB AS 6.20)
    and trying to use the the iViews in the MyBudget workset – we are getting the following errors:
    Using iView “Chritical Variance on My cost centers” and “assets monitor” we are getting the error “Error in Source. Message not available”.
    Using iView “Critical Line Items on My Cost Centers” ” we are getting the error “An error occurred in the SAP system10 The specified SAP system could not be found null SAP_R3_Financials”.
    We have made system allias for our system oursystem = SAP_R3_Financials and the user we are using have accesse to the portal as well as the backend system.
    When creating normal SAP transaction iViews we have no problem accessing the backend system from the Portal.
    Any good ideas will be appriciated.
    Kurt

    Check out this note 790896.

  • Business Package for Assets 50.3.1:  Error in Source. Message not available

    Hi
    Just deployed the Business Package for Assets 50.3.1 on Portal version 7 with SP8, when running the Assets detail, my assets iviews always display:  "Error in Source. Message not available."
    even all other iviews on the same page still work as expected.
    has anyone got the similar problem before? please help!!!
    many thanks in advance!
    Gang

    When logged on to R/3, choose the following from the menu:
    System > Status...
    In screen area "SAP System data" click on the button next to "Component version".
    Look for the component named only "PI", and check wether it exixts and what release it is, it should be at least 2003_1_XXX (where XXX represents your R/3 Appl version).
    Also, check that you have the component "WP-PI" installed with the release 600_XXX (where XXX corresponds to your SAP Basis release).
    I know I needed to check/install these two when I configured the Assets package.
    /Christine

  • Delta loading master data errors in source system Message RSM340 quality

    Hi,
    I'm trying to load with delta  master data for standard data sources.
    In dev, everything seems fine.
    I' ve transported the same elements to QA. I've done init, it is ok. I do delta, I get red status: Errors in source system, message no. RSM340. I've tried to put my delta on green, I've remade my init, I've reloading with delta, and I get the same problem.
    I have this problem for all master data loading.
    Should I install some infoobject from Bi Content?
    Thanks a lot !

    Hi,
    Check following threads
    [3003 + R3299 + RSM340] error messages loading an ODS
    Extraction failed with error Message no. RSM340
    BW Data Loading - Delta Processes
    Thanks and regards
    Kiran

  • Error in Source. Message not available

    Hi
    We are using EP7.0 SP16 and ECC5.0.
    I created com.sap.pct.srv.portaldataviewer.SAPQueryTemplate iview for MSS with following properties
    1) Name of the Query: MSS_IT0105
    2) Query Workspace: G
    3) Selection Variant: SAP&STANDARD
    4) Systemidentifier: SAP_R3_HumanResources
    5) Usergroup: /SAPQUERY/MS
    I am getting an error u201CError in Source. Message not availableu201D.
    Regards
    Srikanth

    Hi
    Check this link
    [New SAP NetWeaver 7.01 ABAP Trial Version] - Installation issues
    thanks

  • Get Error in source system when loading flatfile from application server

    Hi
    I'm loading data from flatfiles on the application server. In the datasource if I display the sample data. It shows fine.
    But when I execute the infopackage I get an error when it is loading the data to PSA.
    The error is
    Error in source system
    Message no. RSM340
    There is no further information
    But if I load from my machine it works fine.
    Any help will be great

    Hi,
    As you can view display the sample data. It shows fine.
    It mean there is no issues in BW (File path is correct, Data in Flat file is correct).
    Then definetely its with the source system, which is resisting to pass IDOC to BW.
    Now.we need to know the its problem with File on App serv or App serv itself?
    Just check trying to Load another  Flatfile in App serv.
    Let me know.
    Regards
    Hari

  • System log problem ( Errors in source system)

    Hi,
       I Got the error message at psa level while extracting data from r/3 to bi is
    Errors in source system
    Message no. RSM340
    and i checked in sm21 , i found the system log for my user as
    Operating system call gethostbyname failed (error no. 11004)
    I checked all related forums but no use.
    can any one give the solution.
    thank you.

    hi,
       Basis team side they are saying that every thing is ok. today when i trigger the info package at background job , after extracting 37 lakh records , i got the same error that is
    under details tab
    Data Package 1 : arrived in BW ; Processing : Processing not yet finished, entry 70 still missing  ,
    this message for data package 2 also and
    Data Package 151 : arrived in BW ; Processing : Selected number does not agree with transferred n
    this message for data package 152, 153, 154,155.
    under status tab the error message is
         *Error during import of results for employee 00004000     *
         *Errors in source system ( Message no. RSM340)     *
    I find one thing that when i gave selection on employee number i got the data into psa with out any error but when i gave date as selection at infopackage level i got tha same above error.
    Edited by: Srikanth.T on Feb 28, 2012 12:55 PM

  • Delta Loads failling after system copy with error in source system(RSM340)

    Hi Guru's
    We recently performed system copy in BI side.I am facing same issue in couple of chains.Process chains are failing at delta loads with error in source system(ERROR IN SOURCE SYSTEM-message no-RSM340 ).When I go for repeat option ,delta loads are running fine.I did some research regarding RSM340 and I found note:1576331.
    But my system is not showing any 'Time Inconsistencies'.So.I was not able to find any clue about it.
    Could anybody help  me out in this aspect.
    Thanks!!!
    Kuldeep

    Hi,
    Check whether the profiles that ran in background have the following authorizations.
      The RFC user on BW, receiving data from OLTP system, should have  S_BI-WHM_RFC and S_RS_ALL in the user profile.
    The RFC user on OLTP, receiving request from BW system, should have  S_BI-WX_RFC, S_IDOC_ALL, and, B_ALE_ALL in the user profile.
    Regards .

  • An error occurred in the source system

    Hi Gurus,
    when i am trying to load the data into the master data object 0PMNT_BLOCK_TEXT ,I am getting the error "an error occured in the source system"with caller 09. and the  error message contains  "no transfer structure available for info source 0PMNT_BLOCK_TEXT in the source system and "errors in source system".
    I have loaded the data in development and quality environments succesfully.this problem is causing in production environment.all other loads are working fine.
    Please give me your valuble inputs.
    regards
    Sridhar V

    Hi,
    there may be no connection with source system to BW system.
    please check the same in RSA1 Source system tree for the source system, context menu, check the connection.
    if not activate the transfer stru. of this object in BW system by replicating the datasource.
    Regards,
    Vishwa.

  • Error occurred in the source system

    Hi,
    I am receiving the below error while loading data from APO system
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
    ******On further investigating the error message I get the following Diagnosis and Resolution details.*****
    Diagnosis
        The sequence for creating time series in LiveCache is:
        1.  Characteristic value combinations are created which in turn create
            planning object in the system
        2.  The combination of version, planning area, and planning object is
            initialized, creating time series  in LiveCache. This combination is
            so to speak the LiveCache anchor.
        This error occurs if
        o   New characteristic value combinatons have been created for the
            master palnning object structure that is assigned to the planning
            area, but the time series objects were not created.
    System response
         Processing cannot continue.
    Procedure
         There are two methods of creating time series objects for individual
         characteristic value combinations:
             a)  Re-initialize the version without deleting the time series
                 objects beforehand.
             b)  Execute the report program /SAPAPO/TS_LCM_PLOB_DELTA_SYNC.
         In general SAP recommend that when you generate new characteristic value
         combinations, you set the Create time series objects indicator.  This
         prevents this error from occurring.
    Please let me know what I need to do to rectify this error. Please send me the steps to overcome this error.
    Regards,
    Tyson

    Hi tyson,
    Has it run good before? if yes, try to restore the source system.
    by right click on the source system then choose restore.
    It will require you to fill in some information about RFC destination. contact with your basis to have the information about: Target host, Sys no, and Sys ID of your APO system.
    hope it help. Give point if you see its helpful.
    Chuong Hoang

  • An error occurred in the source system when running infopackage

    Hello,
    I am using 0CO_PC_PCP_03 (Product Cost Planning: Itemizations Costing) and cube 0COPC_C10 (Exploded Itemization) in BI. RSA3 extractor checker shows that there is data if you put in a period.But as soon as I run the infopackage I get error    :
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Service API .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    And i did put in the period in the internal formatfor  FROM and TO in the selection tab on the infopakand  but I am still getting the same error.
    And when i go into details it gives me " Error occurred in the data selection "
    Please assist
    Thanks

    I followed what you & Tarun advised and it shows the job as finished.Also this is what the log read:
    Date        Time      Message
    04/03/2009  12:49:29  Job started
    04/03/2009  12:49:29  Step 001 started (program SBIE0001, variant &0000000000160, user ID DEVERP100)
    04/03/2009  12:49:29  Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
    04/03/2009  12:49:29  DATASOURCE = 0CO_PC_PCP_03
    04/03/2009  12:49:29  RLOGSYS    = DEVBI100
    04/03/2009  12:49:29  REQUNR     = REQU_4DCA7N474P53QS8FJQ0RAKOW5
    04/03/2009  12:49:29  UPDMODE    = F
    04/03/2009  12:49:29  LANGUAGES  = *
    04/03/2009  12:49:29  *************************************************************************
    04/03/2009  12:49:29  *          Current Values for Selected Profile Parameters               *
    04/03/2009  12:49:29  *************************************************************************
    04/03/2009  12:49:29  * abap/heap_area_nondia......... 2000683008                              *
    04/03/2009  12:49:29  * abap/heap_area_total.......... 2000683008                              *
    04/03/2009  12:49:29  * abap/heaplimit................ 40894464                                *
    04/03/2009  12:49:29  * zcsa/installed_languages...... 1NEFDIJLPS                              *
    04/03/2009  12:49:29  * zcsa/system_language.......... E                                       *
    04/03/2009  12:49:29  * ztta/max_memreq_MB............ 2047                                    *
    04/03/2009  12:49:29  * ztta/roll_area................ 3000320                                 *
    04/03/2009  12:49:29  * ztta/roll_extension........... 2000683008                              *
    04/03/2009  12:49:29  *************************************************************************
    04/03/2009  12:49:29  Synchronized transmission of info IDoc 3 (1 parallel tasks)
    04/03/2009  12:49:29  IDOC: Info IDoc 3, IDoc No. 6812, Duration 00:00:00
    04/03/2009  12:49:29  IDoc: Start = 04/03/2009 12:49:29, End = 04/03/2009 12:49:29
    04/03/2009  12:49:29  Job finished

  • An error occurred in the source system, DBIF_RSQL_SQL_ERROR

    Dear All,
    last 4 days my process chain stop, now todya i activate the process chain. i found a error In 0FI_AR-4.
    the error i found
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
    i already check in RSA3 , Once execute 0FI_AR_4 I Found a dump
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
    neither
    caught nor passed along using a RAISING clause, in the procedure
    "BWFIR_READ_BSID_CPUDT_DATA" "(FUNCTION)"
    Since the caller of the procedure could not have expected this exception
    to occur, the running program was terminated.
    The reason for the exception is:
    How to correct the error
    The exception must either be prevented, caught within the procedure
    "BWFIR_READ_BSID_CPUDT_DATA"
    "(FUNCTION)", or declared in the procedure's RAISING clause.
    To prevent the exception, note the following:
    Database error text........: "ORA-25153: Temporary Tablespace is Empty"
    Internal call code.........: "[RSQL/FTCH/BKPF_BSID ]"
    Please check the entries in the system log (Transaction SM21).
    You may able to find an interim solution to the problem
    in the SAP note system. If you have access to the note system yourself,
    use the following search criteria:
    "DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
    "SAPLBWFIR" or "LBWFIRU10"
    "BWFIR_READ_BSID_CPUDT_DATA"
    please any one help on this issue
    Advance in thanks
    Regards
    Priya

    Hi,
    Can you please try adding the datafile to the PSAPTEMP tablespace in the source system, and try to start the process chain again. If required you have to contact the Basis Administration. Also please find the system logs and dumps in the source system at the point of time.
    Can you please let me know if it got fixed.
    Thanks & Regards,
    VR

  • Folio Builder: An error has occurred opening the source file for the article layout.

    I have been working on a Folio. When I sat down to work on my folio, I was instructed by indesign to update my Folio producer tools, which I did.
    Since then I can no longer view any article layout from that folio in indesign. Indeed any folio that I create that does not reside on my desktop give the same problem. I can import articles, add articles and they all upload to the proper place at adobe and I can view them. But I simply cannot open them up through folio builder as I previously.
    The exact error message is as below:
    An error has occurred opening the source file for the article layout.
    The InDesign file for the layout cannot be found.
    Another strange thing that seems to be happening is that the folio will randomly reoder the articles in the folio.
    I have dumped my indesign prefs, tried creating an entirely new project, made a new account and even reinstalled the entire software.
    But the problem of opening an article that I have imported or added to a folio, simply not being found to open has got me stumped. I can't proceed with a major project until I can sort this out.
    Can anyone help.
    Many thanks
    Steve
    The problem initially seemed very similar to the one linked below, but I dont get the content generation error
    http://forums.adobe.com/thread/901804?decorator=print&displayFullThread=true

    Questions about the Adobe Digital Publishing Suite should be posted in the DPS Forum.
    http://forums.adobe.com/community/dps

  • Source system not available error

    If the error message is teling as source system not available
    so what can be the reasons for that and tell me the solution also.
    data cllection is incorrect
    so what can i do i have checked trfc connections every thing but every thing is fine
    so any body help me out in this.
    your suggstions will be rewarded.
    Regards.
    Vikram.

    Hi Vikram,
    Try the below mentioned steps:
    1. Check the connections on BW sysetem and R/3 system.
    Use the tcodes: sm58 and sm59. On the context menu of the source system created, check the option for conections. If connections are not fine, contact the basis team
    2. Go to 'source systems' select you source system and right click and select 'Repicate Data Sources' , then try replicating the the infosource for that
    appilication at the top node level as a whole, the try replicating the Data source
    with in your infoarea..
    Hope it would help ..if yes..assign points.
    Regards,
    Manu.

  • An error occurred in the source system (DB Conect)

    Hi,
    It message appear while an ODS was loading data fully to a Cube.
    Please, can anyone help me to solve this problem?
    Thank you very much in advance.
    Jorge
    Mensaje de error del sistema fuente
    Diagnóstico
    An error occurred in the source system.
    Actividades en el sistema
    An error occurred in Extractor .
    Check the error message.
    Procedimiento
    The procedure for removing errors takes place depending on
    the error message:
    Note
    If the source system is a Client Workstation, then it is possible that the file that was to be loaded was being edited at the time of the data request. Make sure that the file is in the specified directory and is not being edited, and restart the request.

    HI,
    go to RSA1->Source systems -> Right-click -> check. if the connection is OK then, u will find the message in the status bar saying that, source system connection ok.
    otherwise select the source system>context menu>activate.
    if its activated then replicate your data source if it is giving error while activating source system, then contact your BASIS Administrator to activate the Source system.
    plz assign points
    regards
    vadlamudi

  • An error occured in the source system

    My process chain has been doing FULL load for COPA data in a ODS. It failed today saying
    Diagnosis
    An error occurred in the source system.
    System response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    When I click on indiv. Message tab I get "Job in source system terminated - Requests is set to red"
    What should I do to resolve the problem.

    For Source system R3 :
    This particular problem "Job terminated in the source System" occurs when there are long running jobs in the backend.
    In the monitor tab,
    Environment --> Job Overview --> In the source system.
    After logging into the source system, click execute
    Check the status of the job i.e. active or failed.
    Check the job log for the same.
    If its " DBIF_SQL_..... " sort of error, then in this case, delete the request from the data target and reload again.
    The load would be successful
    Caller 09 error normally occurs when the source from which the datasource is picking up data may be in use on the R3 side.
    Hope this helps!!!!!!!

Maybe you are looking for