Error occured for "APP-PO-14090: Document was not created

Hi All,
Can anbody please help for the error occured as
"APP-PO-14090: Document was not created", while creating purchase order through Auto create feature in Purchasing Module.
So request you please help me.
Thanks for your response in advance.
Thanks & Regards,
Ram.V

Hi All,
Thanks for the replies, I found the sollution.
for further references here I am providing the sollution.
The issue happens when ship to bill to location is there but the organization is not given in the location definition form while defining the location. In order to reference the organization to location please perform the following steps:-
1. Go into the responsibility: India Local Inventory
2. Navigate to Oracle Inventory > Setup > Organizations > Locations > Query Location
3. Navigate to Other tab and provide the name of organization. Save changes.
4. Retest the issue.
5. Migrate the solution as appropriate to other environments.
Thanks & Regards,
Ram.V
Edited by: 901012 on Dec 11, 2011 11:31 PM

Similar Messages

APP-PO-14090: dOCUMENTS WAS NOT CREATED

Dear all,
I am trying to Auto-create PO from PR 123. however the error appears and error detail is mentioned below.
APP-PO-14090: DOCUMENTS WAS NOT CREATED
POSSSIBLE CUASES:
1: AN EXCEPTIN OCCURED IN THE PO ACCOUNTING GENERATOR WORKFLOW DURING THE DOCUMENT CREATION PROCESS.
2: SOME OTHER ERROR
Regards
Nain

Hello Nain,
Please refer below matalink note, it may help you to resolve your issue.
Troubleshooting Guide To Resolving Error APP-PO-14090: No Requisition Lines Were Autocreated (Doc ID 283494.1)

TR was not created after MIGO

Hi, experts
Sometimes after I did goods receipt with MIGO for purchsing order, the TR was not created by system. Normally after MIGO system create material document and TR at same time, then I use LT06 with reference the document no. place it to the storage bin.
But for this case, no TR generaged. I can only use LT10 /mvt999 to move them to the storage bin.
Can you please tell me the possible reason for this problem( TR not created)?

Can you please check what is the movement type being used ? If you were able to use LT06 in some cases means that most probably 101 is correctly defined in LE--> Interfaces --> Movement types to trigger the TR's.
1) however, if you are using / different movement type is being triggered and is not set up to create the TR.
2) If you see that the movement type is still 101, you could still be creating the TR's in the background, however, if you have a background job or some other transaction that is confirming the open TR's , this could be one of the reasons why you are not able to use LT06.
For this you can go to MIGO ( go to display tab for material document) , go to WM tab and find out the TR # there.
You can then go to LB03 and if you scroll to the right , you will find the TO # created.
Please go to LT21 and check who and how the TO is being created / confirmed, if thats something out of the process for you.
Thanks

Virtual Machine Manager database was not created

Hi
I Use this
link to Install SYVM 2012 SP1 on My lab .
But When i got section "Install VMM", The installation Give me the following error .
The Virtual Machine Manager database was not created.
The Virtual Machine Manager database was not created. Delete VirtualManagerDataBase.mdf and VirtualManagerDataBase_log.ldf if they exist at or use a unique name for the database. Also, verify that disk quota management is not enabled for the drive where the database is being created. Then run Setup again.
how to fix it ?
Whenever you see a helpful reply, click on Vote As Helpful & click on
Mark As Answer if a post answers your question.
LinkedIn:
Facebook:

I also disable the firewall on SQL Server , but doesn't work .
Now i Create data base manually and i can cross that error , but it stop with this new error
Access to the path 'C:\ProgramData\VMMLogs\SetupWizard.log' is denied
Whenever you see a helpful reply, click on Vote As Helpful & click on
Mark As Answer if a post answers your question.
LinkedIn:
Facebook:

Oracle.apps.fnd.framework.OAException: Could not create Java class

Hi,
Have created a customization in one environment which works just fine. When I deploy it to the next environment I get the error message:
oracle.apps.fnd.framework.OAException: Could not create Java class
Things I have checked:
1) Imported the personilzations
2) bounced apache
3) confirmed the $CLASSPATH
4) clear the cache
What else can be causing the this?
Thanks

Hi,
Move the all class files to respective java top. if you moved all class files to java top cross check once.
Thanks,
Venkat

Could not save the document to the repository for the following reason: [repo_proxy 30] DocumentFacade::uploadBlob - Query execute has failed : Error occurred while attempting to reconnect to CMS : Not a valid logon token. (FWB 00003) (hr=#0x80042a70) (WI

Hi, getting Could not save the document to the repository for the following reason: [repo_proxy 30] DocumentFacade::uploadBlob - Query execute has failed : Error occurred while attempting to reconnect to CMS : Not a valid logon token. (FWB 00003) (hr=#0x80042a70) (WIS 30567) amongst lots of other errors when scheduling.
I was logged in as administrator and attempting to schedule a webi document to my self using the email option.
thanks in advance

Hi Trinath,
Could you please confirm if you could save a new report as well or not; or is it specific to scheduling.
If you are unable to save a report also then I think this is due to the path of the Input File Repository Server or its temporary directory are not pointing to the same path, and their locations are set to 2 different hard drives
BOXI3.1 Server must use the same hard drive (local or network share) for the Input File Repository Server and its temporary directory.
- Shahnawaz

HT1414 i was updating my iphone 4s but an error occured while updating it. my computer is not recognizing the phone and i cant restore it.

i was updating my iphone 4s but an error occured while updating it. my computer is not recognizing the phone and i cant restore it.

See this support document for help. You may have to do this more than once. http://support.apple.com/kb/HT1808

An error occurred at the server : Your request was cancelled due to an internal error on the Page Server. The object you are try

hi i am getting this error.
An error occurred at the server : Your request was cancelled due to an internal error on the Page Server. The object you are trying to view does not have the required property 'SI_FILES'. Please contact your system administrator
please do the nedful.

yeah Ted Ueda,
what you are saying is correct. i am getting this output for
report.getProgID() is CrystalEnterprise.Report.
can you elaborate this. i am new to this. and also please let me know how to start and if u have any materials on this please forward to [email protected] and [email protected]
please let me know which is best book for beginers.
Thanks & Regards,
Purushotham Podaralla

Unknown error occurred for application (application name) (id=5 [5], 5[5])

Environment: ZFD4
Windows OS: 2000 Professional Sp4
Novell Client: Tried both: 4.83SP2 and 4.91SP3
Zenworks Server: NW51 SP6
I successfully created a NAL object for an application called Delphi from
a company called NewMarket. The Application utilizes an SQL database and
runs off a Windows 2000 server. We already have one NAL object for this
application which works fine. The new object I created is for a newer
version of this appliction.
I have compared all the settings, and parameters of the new object with
the old one and all are in identical. I am not entirely sure of every
registry or INI entry though.
On trying to deploy the object, the files and registry entries of the
application seem to get copied to a point from what I can see but then it
always ends up with this error: " Unknown error occurred for application
DelphiMV92.Woodbine.OJC (id=5 [5], 5[5]).
I did a search for this error off Novell's knowledge base but came up
empty.
Any thoughts about what could be the problem?
Will greatly appreciate any help with this.
Thanks very much
Kenneth

Originally Posted by Craig Wilson
Export the object as an "AXT" file and mail to
Craig_D_Wilson at yahoo dot com
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared either Novell or any rational human.
"Kenneth " <[email protected]> wrote in message
news:_vl0i.484$[email protected]..
> Environment: ZFD4
> Windows OS: 2000 Professional Sp4
> Novell Client: Tried both: 4.83SP2 and 4.91SP3
>
> Zenworks Server: NW51 SP6
>
> I successfully created a NAL object for an application called Delphi from
> a company called NewMarket. The Application utilizes an SQL database and
> runs off a Windows 2000 server. We already have one NAL object for this
> application which works fine. The new object I created is for a newer
> version of this appliction.
>
> I have compared all the settings, and parameters of the new object with
> the old one and all are in identical. I am not entirely sure of every
> registry or INI entry though.
>
> On trying to deploy the object, the files and registry entries of the
> application seem to get copied to a point from what I can see but then it
> always ends up with this error: " Unknown error occurred for application
> DelphiMV92.Woodbine.OJC (id=5 [5], 5[5]).
> I did a search for this error off Novell's knowledge base but came up
> empty.
>
> Any thoughts about what could be the problem?
>
> Will greatly appreciate any help with this.
>
> Thanks very much
> Kenneth
>
I had the same type of error and found that the version of snapshot was different then the version of zen on our network. When I matched the two versioin the snapshot worked perfect. Hope this helps.

WIJ20005 error occurred while editing the WebI document

Hello Everyone,
An error occurred while editing the WebIntelligence document.
The error don't occur when you run again.
Do you know the cause of this problem?
Please give me advice how to investigate.
Error message is as follows:
The current request has returned corrupted data. Contact your administrator (ERR WIJ 20005)
Version: 12.4.4.1557
Application server:
http://xxx.xxx.xxx.xxx:80/AnalyticalReporting/cdzisapi.wis
Stack trace:
java.lang.NullPointerException
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI$TabSpaceAllocator.a(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI$TabSpaceAllocator.reArrange(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI.ensureCurrentRects(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI$TabbedPaneScrollLayout.calculateTabRects(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI$TabbedPaneLayout.calculateLayoutInfo(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI.ensureCurrentLayout(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI.a(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI.access$1900(Unknouwn Source)
at com.jidesoft.plaf.basic.BasicJideTabbedPaneUI$f_.componentAdded(Unknouwn Source)
at java.awt.Container.processContainerEvent(Unknouwn Source)
at java.awt.Container.processEvent(Unknouwn Source)
at java.awt.Component.dispatchEventImpl(Unknouwn Source)
at java.awt.Container.dispatchEventImpl(Unknouwn Source)
at java.awt.Component.dispatchEvent(Unknouwn Source)
at java.awt.Container.addImple(Unknouwn Source)
at javax.swing.JTabbedPane.insertTab(Unknouwn Source)
at com.jidesoft.swing.JideTabbedPane.insertTab(Unknouwn Source)
at javax.swing.JTabbedPane.addTab(Unknouwn Source)
at com.businessobjects.wp.tc.query.TCQueryTab.createUniversTab(Unknouwn Source)
at com.businessobjects.wp.tc.query.TCQueryTab.init(Unknouwn Source)
at com.businessobjects.wp.tc.query.TCQueryTabManager.addQueryTab(Unknouwn Source)
at com.businessobjects.wp.tc.query.TCQueryTabManager.updateWithDP(Unknouwn Source)
at com.businessobjects.wp.tc.query.TCQueryPanel.createQueryTabs(Unknouwn Source)
at com.businessobjects.wp.tc.query.TCQueryPanel.load(Unknouwn Source)
at com.businessobjects.wp.tc.TCMain.initClient2(Unknouwn Source)
at com.businessobjects.wp.tc.TCMain.initClient(Unknouwn Source)
at com.businessobjects.wp.tc.thread.InitAppletRunner.run(Unknouwn Source)
at java.lang.Therad.run(Unknouwn Source)
Environment:
[Server]
- Windows 2008 R2 Enterprise
- BOXI3.1 FP4.4 (IIS)
[Client]
- Windows7 SP1
- IE8
- JRE6 Update21
Regards,
Mayumi

Hi, Yuvraj
Thank you for advice.
>What is the default editing tool set in Prefererences --> WebIntelligence?
>Do you get issue with Interactive mode?
>
>If Advanced mode, have you tried uninstalling and re-installing Java
>and check?
It's Advanced mode.
This error occur sometimes.
And if you re-run after an error occurs, the error does not occur.
So, I guess this error has affected the Java cache file, not the Java software.
How do I check what Java cache is corrupted.
>How many reports are giving this issue?
This error occurs in various reports, but I din't know the number of reports.
>Is this issue coming on all machines or single machine?
This error has occurred in several machine.
>Do you face a similar issue when using Webi Rich Client?
This error occur sometimes, and I usually not use Webi Rich Client.
Try to check, but be difficult.
Regards,
Mayumi

HELP Logfile Error: applepushserviced: APSCourier: 0x7f8a6150fad0 : Stream error occurred for APSTCPStream: 0x7f8a61504a40 : The operation couldn't be completed. Socket is not connected

Two days ago I noticed a noise my MBP started to make all by itself, it started basically right after I changed the sync contacts option in iTunes for my iPhone to sync my contacts along with my gmail contacts. I've changed it back since then but it continues to make the noise and log file error entries are still posting. Below is my error log file for this issue from the first instance to the last one. Can someone please tell me how to fix this?
5/6/12 5:36:55.323 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x7f8a61504a40>: The operation couldn’t be completed. Socket is not connected
5/6/12 5:36:55.338 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x7f8a61504a40>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/6/12 5:36:55.343 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x7f8a6152b960>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/6/12 6:19:08.556 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x7f8a6152ab60>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/6/12 6:31:36.063 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x7f8a6152b960>: The operation couldn’t be completed. Socket is not connected
5/6/12 6:31:36.077 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x10ab5a350>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/6/12 6:31:36.085 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x10ab5a350>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/6/12 6:37:38.014 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x7f8a615291a0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/6/12 6:37:40.525 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x7f8a6152cd20>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/6/12 9:16:16.042 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x7f8a61501990>: The operation couldn’t be completed. Socket is not connected
5/6/12 9:16:16.065 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x10ab4bf30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/6/12 9:16:16.070 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x7f8a615291a0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/6/12 9:16:17.575 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x10ab5a350>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/6/12 9:16:18.597 PM applepushserviced: <APSCourier: 0x7f8a6150fad0>: Stream error occurred for <APSTCPStream: 0x10ab58270>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 5:44:10.355 AM applepushserviced: Unable to bootstrap_lookup connection port for 'com.apple.iCalPush': unknown error code
5/7/12 7:59:36.004 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6150fc30>: The operation couldn’t be completed. Socket is not connected
5/7/12 7:59:36.065 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6150fc30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 7:59:36.096 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab5d240>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 7:59:36.520 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61501990>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 7:59:39.044 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61501990>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 7:59:41.177 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab7f8d0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 7:59:43.695 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab7f8d0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 8:51:48.271 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab67f60>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 8:51:48.272 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6150fc30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 9:16:30.061 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab4bf30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 9:17:37.165 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6152b960>: The operation couldn’t be completed. Socket is not connected
5/7/12 9:17:37.172 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab6c0b0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 9:17:37.188 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6150fc30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 10:20:19.760 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6152b960>: The operation couldn’t be completed. Socket is not connected
5/7/12 10:20:19.766 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab87a00>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 10:20:19.775 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab87a00>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 10:20:19.781 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a615291a0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 10:21:47.436 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6150fc30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 10:21:47.671 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6150fc30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 1:45:59.140 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab6e570>: The operation couldn’t be completed. Socket is not connected
5/7/12 1:45:59.155 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6152b960>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 1:45:59.243 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab73150>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 1:46:00.308 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab87a00>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 2:09:38.352 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab87a00>: The operation couldn’t be completed. Socket is not connected
5/7/12 2:09:38.394 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab87a00>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 2:09:38.414 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab73070>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 2:09:39.301 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab73070>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 5:34:43.403 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6150fc30>: The operation couldn’t be completed. Socket is not connected
5/7/12 5:34:43.430 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6150fc30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 5:34:43.447 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61526790>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 5:34:45.952 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61526790>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 6:20:48.145 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61501990>: The operation couldn’t be completed. Socket is not connected
5/7/12 6:20:48.169 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61501990>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 6:20:48.178 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab6d360>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 6:20:48.184 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61553e50>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 6:33:59.398 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab58660>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 6:34:01.913 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6150fc30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 6:57:20.569 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab66ab0>: The operation couldn’t be completed. Socket is not connected
5/7/12 6:57:20.583 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61504a40>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 8:11:38.386 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61504a40>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 9:14:13.280 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab68960>: The operation couldn’t be completed. Socket is not connected
5/7/12 9:14:13.298 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab68960>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 9:14:13.311 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61526790>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 9:14:14.076 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61501990>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 9:23:52.792 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a615479b0>: The operation couldn’t be completed. Socket is not connected
5/7/12 9:23:52.809 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab58270>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/7/12 9:23:52.828 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab58270>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 1:01:40.292 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab6d360>: The operation couldn’t be completed. Socket is not connected
5/8/12 1:01:40.307 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab6d360>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 1:01:40.312 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab3fe30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 2:49:58.175 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab3fe30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 5:31:59.322 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab6d360>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 5:32:00.256 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61526790>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 5:32:01.763 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61526790>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 5:32:02.767 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a6150fc30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 6:02:10.243 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a615479b0>: The operation couldn’t be completed. Socket is not connected
5/8/12 6:02:10.268 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a615479b0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 6:02:10.323 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab3fe30>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 6:02:12.129 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61554bf0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 6:02:14.638 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61554bf0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 10:58:53.278 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab68960>: The operation couldn’t be completed. Socket is not connected
5/8/12 10:58:53.307 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab68960>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 10:58:53.315 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab68960>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 11:41:08.131 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a615291a0>: The operation couldn’t be completed. Socket is not connected
5/8/12 11:41:08.152 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a615291a0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 11:41:08.249 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a615168f0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 11:41:09.746 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab73070>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 11:46:54.727 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab63590>: The operation couldn’t be completed. Socket is not connected
5/8/12 11:46:54.740 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab63590>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 11:46:54.746 AM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x7f8a61504a40>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 1:55:41.541 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab73070>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
5/8/12 1:55:44.051 PM applepushserviced: <APSCourier: 0x7f8a615343a0>: Stream error occurred for <APSTCPStream: 0x10ab66ab0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)

I get same error, i was trying to, understand why the host in my Terminal was "HOST139cddb40e29 " and not "MacBookHouse", then after the same error you get i see this two lines, just after:
21/06/12 13:05:22,371 configd: network configuration changed.
21/06/12 13:05:22,747 configd: setting hostname to "HOST139cddb40e29"
May be make some sense to somebody. i will see...

SQL Server 2012 installation failure An error occurred for a dependency of the feature causing the setup process for the feature to fail.

I am installing SQL Server 2012 Developer (from ISO image written on DVD), my machine has Windows 7 (Edit: Windows 7 with service pack 1) on it. This machine already has SQL Express and SQL 2008 R2 Express installed in it.
On running 2012 setup it goes fine from Setup Support Rules to Installation Progress. In Installation Progress after some progress installation fails.
Windows show the following components couldn't installed:
Managment Tools Complete Failed. Client Tools Connectivity Failed. Client Tools SDK Failed. Client Tools Backwards Compantibility Failed. Managment Tools Basic Failed. SQL Server Data Tools Failed. Reporting Services -Native Failed. Database Engine
Services Failed. Data Quality Services Failed. full-Text and Semantic Extractins for Search Failed. SQL Server Replication Failed. Integration Services Failed. Analysis Services Failed. SQL Client Connectivity SDK Failed.
In detail for failure of every component it provide these details:
Action required:
Use the following information to resolve the error, and then try the setup process again.
Feature failure reason:
An error occurred for a dependency of the feature causing the setup process for the feature to fail.
In summary log file it provide the following details:
Overall summary:
Final result:                  Failed: see details below
Exit code (Decimal):           -2068643839
Start time:                    2012-07-31 16:23:37
End time:                      2012-07-31 16:33:32
Requested action:              Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for Adv_SSMS:        Use the following information to resolve the error, and then try the setup process again.
Next step for Conn:            Use the following information to resolve the error, and then try the setup process again.
Next step for SDK:             Use the following information to resolve the error, and then try the setup process again.
Next step for BC:              Use the following information to resolve the error, and then try the setup process again.
Next step for SSMS:            Use the following information to resolve the error, and then try the setup process again.
Next step for BIDS:            Use the following information to resolve the error, and then try the setup process again.
Next step for RS:              Use the following information to resolve the error, and then try the setup process again.
Next step for SQLEngine:       Use the following information to resolve the error, and then try the setup process again.
Next step for DQ:              Use the following information to resolve the error, and then try the setup process again.
Next step for FullText:        Use the following information to resolve the error, and then try the setup process again.
Next step for Replication:     Use the following information to resolve the error, and then try the setup process again.
Next step for IS:              Use the following information to resolve the error, and then try the setup process again.
Next step for AS:              Use the following information to resolve the error, and then try the setup process again.
Next step for SNAC_SDK:        Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name:                  Haansi-PC
Machine processor count:       4
OS version:                    Windows 7
OS service pack:               Service Pack 1
OS region:                     United States
OS language:                   English (United States)
OS architecture:               x64
Process architecture:          64 Bit
OS clustered:                  No
Product features discovered:
Product              Instance             Instance ID
Feature                                  Language
Edition              Version         Clustered
SQL Server 2005      SQLEXPRESS           MSSQL.1
Database Engine Services                 1033                 Express Edition
9.4.5000        No
SQL Server 2005      SQLEXPRESS           MSSQL.1
SQL Server Replication                   1033                 Express Edition
9.4.5000        No
SQL Server 2005      SQLEXPRESS           MSSQL.1
SharedTools                              1033
Express Edition      9.4.5000        No
SQL Server 2005
Tools                                    1033
Express Edition      9.4.5000        No
SQL Server 2005
ToolsClient                              1033
Express Edition      9.4.5000        No
SQL Server 2005
ToolsClient\Connectivity                 1033                 Express Edition
9.4.5000        No
SQL Server 2008 R2   SQLSERVER08EXPR2     MSSQL10_50.SQLSERVER08EXPR2    Database Engine Services                 1033
Express Edition      10.50.1617.0    No
SQL Server 2008 R2   SQLSERVER08EXPR2     MSSQL10_50.SQLSERVER08EXPR2    SQL Server Replication                   1033
Express Edition      10.50.1617.0    No
SQL Server 2008 R2
Management Tools - Basic                 1033                 Express Edition
10.50.1617.0    No
SQL Server 2012
LocalDB                                  1033
Express Edition      11.0.2318.0     No
SQL Server 2012
Reporting Services - SharePoint
11.0.2100.60    No
Package properties:
Description:                   Microsoft SQL Server 2012
ProductName:                   SQL Server 2012
Type:                          RTM
Version:                       11
SPLevel:                       0
Installation location:         F:\x64\setup\
Installation edition:          Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION:                        Install
ADDCURRENTUSERASSQLADMIN:      false
AGTSVCACCOUNT:                 NT Service\SQLAgent$SS2012
AGTSVCPASSWORD:                *****
AGTSVCSTARTUPTYPE:             Manual
ASBACKUPDIR:                   C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Backup
ASCOLLATION:                   Latin1_General_CI_AS
ASCONFIGDIR:                   C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Config
ASDATADIR:                     C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Data
ASLOGDIR:                      C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Log
ASPROVIDERMSOLAP:              1
ASSERVERMODE:                  TABULAR
ASSVCACCOUNT:                  NT Service\MSOLAP$SS2012
ASSVCPASSWORD:                 <empty>
ASSVCSTARTUPTYPE:              Manual
ASSYSADMINACCOUNTS:            PC\Haansi
ASTEMPDIR:                     C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Temp
BROWSERSVCSTARTUPTYPE:         Automatic
CLTCTLRNAME:                   <empty>
CLTRESULTDIR:                  <empty>
CLTSTARTUPTYPE:                0
CLTSVCACCOUNT:                 <empty>
CLTSVCPASSWORD:                <empty>
CLTWORKINGDIR:                 <empty>
COMMFABRICENCRYPTION:          0
COMMFABRICNETWORKLEVEL:        0
COMMFABRICPORT:                0
CONFIGURATIONFILE:             C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\ConfigurationFile.ini
CTLRSTARTUPTYPE:               0
CTLRSVCACCOUNT:                <empty>
CTLRSVCPASSWORD:               <empty>
CTLRUSERS:                     <empty>
ENABLERANU:                    false
ENU:                           true
ERRORREPORTING:                false
FEATURES:                      SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, BIDS, CONN, IS, BC, SDK, SSMS, ADV_SSMS, SNAC_SDK
FILESTREAMLEVEL:               0
FILESTREAMSHARENAME:           <empty>
FTSVCACCOUNT:                  NT Service\MSSQLFDLauncher$SS2012
FTSVCPASSWORD:                 <empty>
HELP:                          false
INDICATEPROGRESS:              false
INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR:           C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR:             <empty>
INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
INSTANCEID:                    SS2012
INSTANCENAME:                  SS2012
ISSVCACCOUNT:                  NT Service\MsDtsServer110
ISSVCPASSWORD:                 <empty>
ISSVCSTARTUPTYPE:              Automatic
MATRIXCMBRICKCOMMPORT:         0
MATRIXCMSERVERNAME:            <empty>
MATRIXNAME:                    <empty>
NPENABLED:                     0
PID:                           *****
QUIET:                         false
QUIETSIMPLE:                   false
ROLE:                          <empty>
RSINSTALLMODE:                 DefaultNativeMode
RSSHPINSTALLMODE:              DefaultSharePointMode
RSSVCACCOUNT:                  NT Service\ReportServer$SS2012
RSSVCPASSWORD:                 <empty>
RSSVCSTARTUPTYPE:              Manual
SAPWD:                         <empty>
SECURITYMODE:                  <empty>
SQLBACKUPDIR:                  <empty>
SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT:                 NT Service\MSSQL$SS2012
SQLSVCPASSWORD:                <empty>
SQLSVCSTARTUPTYPE:             Automatic
SQLSYSADMINACCOUNTS:           Haansi-PC\Haansi
SQLTEMPDBDIR:                  <empty>
SQLTEMPDBLOGDIR:               <empty>
SQLUSERDBDIR:                  <empty>
SQLUSERDBLOGDIR:               <empty>
SQMREPORTING:                  false
TCPENABLED:                    0
UIMODE:                        Normal
UpdateEnabled:                 true
UpdateSource:                  MU
X86:                           false
Configuration file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\ConfigurationFile.ini
Detailed results:
Feature:                       Management Tools - Complete
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       Client Tools Connectivity
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       Client Tools SDK
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       Client Tools Backwards Compatibility
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       Management Tools - Basic
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       SQL Server Data Tools
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       Reporting Services - Native
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       Database Engine Services
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       Data Quality Services
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       Full-Text and Semantic Extractions for Search
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       SQL Server Replication
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       Integration Services
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       Analysis Services
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Feature:                       SQL Client Connectivity SDK
Status:                        Failed: see logs for details
Reason for failure:            An error occurred during the setup process of the feature.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file:               C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\SystemConfigurationCheck_Report.htm

Please help.
I did what you suggested, but, still got error message to install SQL server data tools: Here is the log.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068037632
Start time: 2014-09-29 15:05:38
End time: 2014-09-29 15:15:55
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SSDTBI_VS2012: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: MSBI
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2008 Management Tools - Basic
1033 Express Edition 10.0.1600.22 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database Engine Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server Replication 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data Quality Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSAS11.MSSQLSERVER Analysis Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSRS11.MSSQLSERVER Reporting Services - Native 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Management Tools - Basic
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Management Tools - Complete
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools Connectivity
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools Backwards Compatibility
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools SDK
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 SQL Server Data Tools
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Integration Services
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Reporting Services - SharePoint
11.0.2100.60 No Yes
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location: C:\9f7a58aa5d6d76ffe6be968a4ad339f5\x86\setup\
Installation edition: Express
Slipstream: True
SP Level 1
Patch Level: 11.1.3128.0
Product Update Status:
Success: KB 2674319, KB 2793634
Product Updates Selected for Installation:
Title: Service Pack 1
Knowledge Based Article: KB 2674319
Version: 11.1.3000.0
Architecture: x86
Language: 1033
Title: SQL Server 2012 SP1 GDR Product Update
Knowledge Based Article: KB 2793634
Version: 11.1.3128.0
Architecture: x86
Language: All
Update Source: MU
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SSDTBI_VS2012, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTANCEID: <empty>
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\ConfigurationFile.ini
Detailed results:
Feature: SQL Server Data Tools - Business Intelligence for Visual Studio 2012
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft Visual Studio Tools for Applications 2012
Component error code: 0x80044000
Component log file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\VSTA2012_LangsSupport_Cpu32_1.log
Error description: VS Shell 2012 installation has failed with exit code -2147205120.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3436.0&EvtType=VSTA2012_LangsSupport%40Install%400x-2147205120
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\SystemConfigurationCheck_Report.htm

An error occurred while parsing DA Hierarchy : Document is invalid: no gram

When logging in to Portal Administration, I am seeing the following error. Please help me resolve this problem. Many thanks.
An exception has been thrown while trying to render this page.
Exception Message:
An error occurred while parsing DA Hierarchy : Document is invalid: no grammar found.
---Begin Stack Trace---
com.bea.p13n.delegation.common.DelegationSystemException: An error occurred while parsing DA Hierarchy : Document is invalid: no grammar found. at com.bea.p13n.delegation.management.internal.DelegationHierarchyAbstractPersistenceManager.parseData(DelegationHierarchyAbstractPersistenceManager.java:209) at com.bea.p13n.delegation.management.internal.DelegationHierarchyAbstractPersistenceManager.get(DelegationHierarchyAbstractPersistenceManager.java:189) at com.bea.p13n.delegation.management.internal.DelegationHierarchyDelegate.getHierarchyRoot(DelegationHierarchyDelegate.java:123) at com.bea.p13n.delegation.management.DelegationRoleManager.getHierarchyRoot(DelegationRoleManager.java:63) at com.bea.jsptools.delegation.Pruner.isRootDARole(Pruner.java:145) at com.bea.jsptools.delegation.PortalNodePruner.isEnabled(PortalNodePruner.java:96) at com.bea.treeutils.PrunableTreeNode.checkEnabled(PrunableTreeNode.java:161) at com.bea.jsptools.portal.PortalHierarchyServlet.generateLibraryNodes(PortalHierarchyServlet.java:856) at com.bea.jsptools.portal.PortalHierarchyServlet.generateTopLevelNodes(PortalHierarchyServlet.java:231) at com.bea.jsptools.portal.PortalHierarchyServlet.generateTree(PortalHierarchyServlet.java:104) at jsp_servlet._portaltools.__portalmgmttree._jspService(__portalmgmttree.java:5784) at weblogic.servlet.jsp.JspBase.service(JspBase.java:33) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1072) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:465) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:293) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:644) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:423) at com.bea.netuix.servlets.controls.content.JspContent.beginRender(JspContent.java:533) at com.bea.netuix.nf.ControlLifecycle$1.visit(ControlLifecycle.java:495) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:542) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:247) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:105) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:356) at com.bea.netuix.nf.UIControl.render(UIControl.java:536) at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:405) at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:123) at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:58) at jsp_servlet._framework._skeletons._beatools.__gridlayout_two_column._jspService(__gridlayout_two_column.java:423) at weblogic.servlet.jsp.JspBase.service(JspBase.java:33) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1072) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:465) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:348) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:638) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:423) at com.bea.netuix.servlets.controls.JspRenderer.renderAlt(JspRenderer.java:194) at com.bea.netuix.servlets.controls.JspRenderer.beginRender(JspRenderer.java:96) at com.bea.netuix.nf.ControlLifecycle$1.visit(ControlLifecycle.java:491) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:542) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:247) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:105) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:356) at com.bea.netuix.nf.UIControl.render(UIControl.java:536) at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:405) at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:123) at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:58) at jsp_servlet._framework._skeletons._beatools.__gridlayout._jspService(__gridlayout.java:193) at weblogic.servlet.jsp.JspBase.service(JspBase.java:33) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1072) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:465) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:348) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:638) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:423) at com.bea.netuix.servlets.controls.JspRenderer.renderAlt(JspRenderer.java:194) at com.bea.netuix.servlets.controls.JspRenderer.beginRender(JspRenderer.java:96) at com.bea.netuix.nf.ControlLifecycle$1.visit(ControlLifecycle.java:491) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:542) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:247) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:105) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:356) at com.bea.netuix.nf.UIControl.render(UIControl.java:536) at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:405) at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:123) at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:58) at jsp_servlet._framework._skeletons._beatools.__gridlayout_outermost._jspService(__gridlayout_outermost.java:285) at weblogic.servlet.jsp.JspBase.service(JspBase.java:33) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1072) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:465) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:348) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:638) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:423) at com.bea.netuix.servlets.controls.JspRenderer.renderAlt(JspRenderer.java:194) at com.bea.netuix.servlets.controls.JspRenderer.beginRender(JspRenderer.java:96) at com.bea.netuix.nf.ControlLifecycle$1.visit(ControlLifecycle.java:491) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:542) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:553) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:247) at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:204) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:153) at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:333) at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:196) at com.bea.netuix.servlets.manager.PortalServlet.doPost(PortalServlet.java:772) at com.bea.netuix.servlets.manager.PortalServlet.doGet(PortalServlet.java:671) at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:147) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1072) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:465) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.bea.servlet.PortalSystemAdministratorFilter.doFilter(PortalSystemAdministratorFilter.java:83) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:293) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6987) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3892) at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2766) at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183) Caused by: org.xml.sax.SAXParseException: Document is invalid: no grammar found. at org.apache.xerces.parsers.DOMParser.parse(Unknown Source) at org.apache.xerces.jaxp.DocumentBuilderImpl.parse(Unknown Source) at javax.xml.parsers.DocumentBuilder.parse(Unknown Source) at com.bea.p13n.delegation.management.internal.DelegationHierarchyParser.getDelegationHierarchy(DelegationHierarchyParser.java:102) at com.bea.p13n.delegation.management.internal.DelegationHierarchyAbstractPersistenceManager.parseData(DelegationHierarchyAbstractPersistenceManager.java:206) ... 129 more
---End Stack Trace---

I have the same problem with Weblogic 8.1 SP5 running on Itanium (the same appl. running on Xeon runs OK).

[CS6]Get the app version in which the document was first created

Hi All,
Is there a way to get the application version in which the document was first created?
Eg: I have a CS6 plugin in which I want to know wether the current document was originally created in CS3 or CS5 or so on.
Any help will be highly appreciated.

I hope that's what you're looking for
        const char* szFileName = "path_to_indd_file";
        FILE* pFile = fopen(szFileName, "rb");
        fseek(pFile, 0x1D, SEEK_CUR);
        int32 ver_maj, ver_min;
        fread(&ver_maj, sizeof(int32), 1, pFile);
        fread(&ver_min, sizeof(int32), 1, pFile);
        switch (ver_maj)
            case 5:
                CAlert::InformationAlert("CS3");
                break;
            case 6:
                CAlert::InformationAlert("CS4");
            case 7:
                ver_min == 5? CAlert::InformationAlert("CS5.5"): CAlert::InformationAlert("CS5") ;
                break;
            case 8:
                CAlert::InformationAlert("CS6");
                break;
            case 9:
                CAlert::InformationAlert("CC");
                break;
            default:
                CAlert::InformationAlert("Unknown version");
                break;
        fclose(pFile);
Regards
Bartek

Decrypt errors occurred for client

I am getting error messages for clients:
11 Mon Jun 14 09:11:56 2010 Decrypt errors occurred for client 00:13:ce:54:57:3c using WPA key on 802.11b/g interface of AP 00:16:9c:91:97:c0
12 Mon Jun 14 09:11:56 2010 Decrypt errors occurred for client 00:16:6f:91:d8:60 using WPA2 key on 802.11b/g interface of AP 00:16:9c:91:97:c0
These are only occuring for clients that are disconnecting....
They can reconnect after a WLC reboot....
We have swapped APs.....
I have seen this error in other forums but it says not to worry about it. There has to be a connection between this and clients getting disconnected. We have anywhere between 10-50 clients on the system at any one time.
Is this a client issue (nic firmware, version) or is this an error in the controller??
AIR-WLC2106-K9
IOS ver: 6.0.196.0
Thanks

This means that the client is using a different key than the one he agreed on using with the AP. There were bugs about this long time ago but nothing recent.
I've seen this happening a lot with old/not updated clients. It rarely happens on intel adapters with latest drivers for example.
So I'd suggest checking the client pattern (are the clients facing this all having old wireless drivers ?).
It can also happen if you offer funny encryption combinations that client doesn't like (wpa1+aes, wpa2+tkip). Try to only enable wpa2/aes and see if it helps.
Nicolas

Error occured for "APP-PO-14090: Document was not created

Similar Messages

Maybe you are looking for